2AAGJKMC1Portable Bluetooth Speaker System

1. ON / READY - Tap to turn on. Hold to put in READY mode. Solid Red indicates ON, flashes if batteries are weak 2. BLUETOOTH THANK YOU Thank you for your purchase of the Klipsch ® Music Center kmc1! The kmc1 combines legendary Klipsch technology with Bluetooth ® and aptX ™ technology for truly hi-fidelity music playback from your favorite music device. With a Bluetooth® connected phone you can also conveniently answer, converse and terminate, or ignore incoming calls, from the kmc1. Its contemporary styling compliments any décor and you can take it almost anywhere with both AC and battery-power options. AC POWER To operate on AC power first select the one plug adapter (3 total supplied) that fits your AC outlet and insert into the supplied AC adapter. Plug other end of the AC adapter into back of the kmc1 marked DC IN, then plug AC adaptor into a functioning wall socket. On AC power, if no streaming or connected audio is detected for one hour the kmc1 will automatically go into READY mode. BATTERY POWER The kmc1 has a built-in rechargeable lithium-ion battery capable of up to 8 hours of playing time. ALLOW 8 HOURS OF INITIAL CHARGE TIME BEFORE FIRST TIME BATTERY USE. Charging occurs when kmc1 is plugged into active AC outlet. If charging while kmc1 is off, VOLUME/BATTERY level indicator shows charg- ing progress and indicator turns off when charging complete. Pushing UTILITY button down with kmc1 on (other than during a Bluetooth-connected phone call) will show current battery strength. The kmc1 operates on battery power unless AC power is utilized. On battery power, if no streaming or connected audio is detected for five minutes, the kmc1 will automatically go into READY mode. To put the unit back into ON mode simply press the ON / READY button on top. USB CHARGING NOTE: The USB jack is only for CHARGING most music players, phones, and tablets. Using the USB connection end of the charging cable for your device (not included), connect to the USB input on rear of the kmc1 to charge your device. You can charge your device using either AC or battery power for the kmc1. NOTE: Using the USB input to charge your device while the kmc1 is on battery power will reduce battery life. If the battery in the kmc1 is too weak, the USB connection will not charge your device. 123546 78 ILLUMINATED CONTROL FUNCTIONS Connected No Connection Hold to Disconnect Hold to Pair Tap to Exit 3. VOLUME DOWN 4. VOLUME LEVEL / BATTERY LEVEL INDICATOR 5. VOLUME UP 6. UTILITY - Answer/Terminate or Ignore a phone call from a Bluetooth-connected phone OR check battery level 7. SOURCE SELECT - Pressing + and – together toggles between Bluetooth mode and AUX (3.5mm input) for playback 8. MUTE - Briefly push POWER ON/OFF and VOLUME DOWN together to MUTE sound during music playback then briefly push same two buttons together again to unmute sound back to original level. ENGLISH TROUBLESHOOTING kmc1 will not power on • Make sure plug adapter is secured tightly to the AC adapter • Make sure AC adapter is plugged tightly into DC input • Make sure AC adapter is plugged into a live outlet • Make sure power switch is turned on • If no AC connection make sure the battery is sufficiently charged (POWER ON/OFF LED will dim/brighten every 5 seconds when the kmc1 is running out of battery power) Device will not pair with Bluetooth mode • Make sure kmc1 is in pairing mode (∞ flashing blue) • Make sure you are within 30 feet (9.1 m) of kmc1 while pair- ing; move closer/make sure you are in the same room • Make sure your volume settings are correct Device does not play in Bluetooth mode or AUX input • Make sure volume on device is up to maximum/kmc1 vol- ume is up at least half way and not MUTED • If using AUX input, make sure connections are tight • Touch + and – buttons together to select correct input • If ∞ solid blue touch and hold + and – together to switch inputs The Bluetooth ® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such mark by Klipsch Group, Inc. is under license. The “aptX™ software is copyright CSR plc or its group companies. All rights reserved. The aptX™ mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. ANALOG MUSIC SOURCE Any device with a standard 3.5mm headphone output can be connected to the AUX input (on back) with a mini-to-mini cable (included). Make sure volume on kmc1 is just above minimum, adjust volume on your device to max and play music. Use SOURCE SELECT to switch to AUX input if necessary. Adjust volume with the volume buttons on the kmc1 to desired level. BLUETOOTH MUSIC SOURCE Any paired Bluetooth device within a 30 foot (9.1 m) range of the kmc1 can wirelessly stream music. For a Bluetooth connected device, set the kmc1’s volume to max and adjust the volume to the desired level using the Bluetooth streaming device. PHONE CONVERSATIONS You can answer/terminate or ignore a phone call from any paired Bluetooth phone. An incoming phone call will pause music and send your connected phone’s ring tone through the kmc1. To answer, briefly press the UTILITY button on the kmc1. Then listen and talk using the kmc1 as you would a speakerphone. Adjust volume using the volume + and – buttons on the kmc1 to desired level. Mute the kmc1’s microphone during a phone call (so the caller cannot hear you) by briefly pressing the ON / READY and VOLUME DOWN buttons together. Unmute the microphone by briefly pressing the same two buttons again. Terminate the call by briefly pressing the UTILITY button again. To ignore a call, press and hold the UTILITY button until the incoming call stops. PAIRING BLUETOOTH DEVICES Press and hold the Bluetooth button (∞) until it flashes (~ 3 seconds). Do not touch any other buttons on the kmc1 during this process. Activate the Bluetooth feature on your device, se…

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Tymphany HK Limited Room 1307-8 Dominion Centre 43-59 Queens Road East, WanChai, Hong Kong 2013/06/28 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AAGJKMC1 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : David.Tam Contact information / address: Room 1307-8 Dominion Centre 43-59 Queens Road East, WanChai, Hong Kong

FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 57 of 64 13. PHOTOS OF EUT External Photos M/N: kmc1 FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 58 of 64 External Photos M/N: kmc1 FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 59 of 64 External Photos M/N: kmc1

Label 1 Location Label 2 Location

2013-4-25 50#消银龙，单面背强力胶 黑底银字,过哑膜 KMC1 KMC1 YLBA24245-0001 YLBA24245-X001 Input: 12V , 3A USB output: 5V , 2.1A

IC: 11154A-KMC1FCC ID: 2AAGJKMC1 2013-4-17 50#消银龙，单面背强力胶 黑底银字,过哑膜 KMC1 KMC1 1016502 13 17 0001 101650213170001 Product Serial Label 机种号料号Vers ionPart NumberRemake ANMAKMC10-EL10YLBA24245-0002KMC1 NA Bl ack1016502YLBA19172-0 001/YLBA13029-0 001/YLBA05235-0 001/YLBA24245-0 002配套使用 ANMAKMC10-EL20YLBA24245-0004 KMC1 NA White 1016503YLBA19172-0 002/YLBA13029-0 002/YLBA05235-0 002/YLBA24245-0 004配套使用 ANMAKMC10-EL31YLBA24245-0012KMC1 NA Red1060062YLBA19172-0 009/YLBA13029-0 009/YLBA05235-0 009/YLBA24245-0 012配套使用 ANMAKMC10-EL50YLBA24245-0014KMC1 NA Bl ue1060063YLBA19172-0 011/YLBA13029-0 011/YLBA05235-0 011/YLBA24245-0 014配套使用 ANMAKMC1 0-EL60YLBA24245-0015KMC1 NA Purp le1060064YLBA19172-0 012/YLBA13029-0 012/YLBA05235-0 012/YLBA24245-0 015配套使用 ANMAKMC10-EL70YLBA24245-0016KMC1 NA Ora nge1060065YLBA19172-0 013/YLBA13029-0 013/YLBA05235-0 013/YLBA24245-0 016配套使用 ANMAKMC10-EL80YLBA24245-0017KMC1 NA Magenta1060066YLBA19172-0 014/YLBA13029-0 014/YLBA05235-0 014/YLBA24245-0 017配套使用 ANMAKMC10-EL41YLBA24245-0013KMC1 NA Yellow1060067YLBA19172-0 010/YLBA13029-0 010/YLBA05235-0 010/YLBA24245-0 013配套使用

FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 60 of 64 Internal Photos M/N: kmc1 Antenna FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 61 of 64 Internal Photos M/N: kmc1 FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 62 of 64 Internal Photos M/N: kmc1 FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 63 of 64 Internal Photos M/N: kmc1

2AAGJKMC1 EST Technology Co.,Ltd Report No. ESTE-R1306005 Page 1 of 3 FCC 47 CFR MPE REPORT Tymphany HK Limited Portable Bluetooth Speaker System Model Number: kmc1 FCC ID: 2AAGJKMC1 Prepared for : Tymphany HK Limited Room 1307-8 Dominion Centre 43-59 Queens Road East, WanChai, Hong Kong, China Prepared By : EST Technology Co., Ltd. Santun Management Zone, Houjie District,DongGuan ,GuangDong, China. Tel: 86-769-83081888-808 Fax:86-769-83081878 Report Number: ESTE-R1306005 Date of Test : June 16~25, 2013 Date of Report : June 26, 2013 2AAGJKMC1 EST Technology Co.,Ltd Report No. ESTE-R1306005 Page 2 of 3 Maximum Permissible Exposure 1、Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a)、Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Times︱E︱ 2 , ︱H︱2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b)、Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Times︱E︱ 2 , ︱H︱2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density 2、MPE Calculation Method E (V/m) = (30*P*G) 0.5/d Power Density: Pd (W/m2) = E2/377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d2) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained 2AAGJKMC1 EST Technology Co.,Ltd Report No. ESTE-R1306005 Page 3 of 3 3、Calculated Result and Limit Antenna gain Model Frequency (MHz) Peak output power (dBm) Peak output power (mW) (dBi) (Linear) Power Density (S) (mW/cm2) Limited of Power Density (S) (mW/cm2) Test Result 2402 2.448 1.7570 1 0.00035 1 Compiles 2441 3.306 2.1410 1 0.00043 1 Compiles GFSK 2480 3.102 2.0430 1 0.00041 1 Compiles

FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 1 of 68 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Tymphany HK Limited Portable Bluetooth Speaker System Model Number: kmc1 FCC ID: 2AAGJKMC1 Prepared for : Tymphany HK Limited Room 1307-8 Dominion Centre 43-59 Queens Road East, WanChai, Hong Kong,China Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1306004 Date of Test : June 16~25, 2013 Date of Report : June 26, 2013 FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 2 of 68 TABLE OF CONTENTS Description Page TESTREPORT VERIFICATION.........................................................................................................................3 1.G ENERAL INFORMATION.................................................................................................................5 1.1.Description of Device (EUT) ........................................................................................................... 5 2.SUMMARY OF TEST.........................................................................................................................6 2.1.Summary of test result...................................................................................................................... 6 2.2.Test Facilities ................................................................................................................................... 7 2.3.Assistant equipment used for test ..................................................................................................... 8 2.4.Block Diagram ................................................................................................................................. 8 2.5.Test mode ......................................................................................................................................... 9 2.6.Test Equipment............................................................................................................................... 10 3.MAXIMUM PEAKOUTPUT POWER.................................................................................................11 3.1.Limit ............................................................................................................................................... 11 3.2.Test Procedure ................................................................................................................................ 11 3.3.Test Result ...................................................................................................................................... 11 3.4.Test Data ........................................................................................................................................ 12 4.20 DB BANDWIDTH.......................................................................................................................14 4.1.Limit ............................................................................................................................................... 14 4.2.Test Procedure ................................................................................................................................ 14 4.3.Test Result ...................................................................................................................................... 14 4.4.Test Data ........................................................................................................................................ 15 5.CARRIERFREQUENCYSEPARATION..............................................................................................17 5.1.Limit ............................................................................................................................................... 17 5.2.Test Procedure ................................................................................................................................ 17 5.3.Test Result ...................................................................................................................................... 17 5.4.Test Data ........................................................................................................................................ 18 6.NUMBER OFHOPPINGCHANNEL..................................................................................................20 6.1.Limit ............................................................................................................................................... 20 6.2.Test Procedure ................................................................................................................................ 20 6.3.Test Result ...................................................................................................................................... 20 6.4.Test Data ........................................................................................................................................ 21 7.DWELL TIME.................................................................................................................................22 7.1.Limit ............................................................................................................................................... 22 7.2.Test Result ...................................................................................................................................... 22 7.3.Test Data ........................................................................................................................................ 23 8.RADIATED EMISSIONS....................................................................................................................26 8.1.Limit .......................................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 55 of 64 12. TEST SETUP PHOTO Conducted Test FCC ID: 2AAGJKMC1 (677HFKQRORJ\&R/WG5HSRUW1R(67(5 Page 56 of 64 Radiated Test (30-1000 MHz) Radiated Test (1000-25000 MHz)