2AAJXQS-IQP4ZZwave 800 Radio

1 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Campbell, CA 95008 USA 1-855-476-5797 IQ Panel4 General Applications: The Qolsys IQ Panel4 features the Quectel Wireless module Model SC650T-NA with FCC ID: XMR2019SC650TNA providing cellular connections (E-UTRA-FDD) Bands 2, 4, 5, 7, 12, 13, 14, 25, 26 and 66. The Quectel module incorporates also provides WiFI 2.4 / 5 GHz and Bluetooth Low Energy 4.2 support. A main antenna and Diversity antenna are embedded on the Qolsys MB to support these features. Additionally the Qolsys IQ Panel4 includes the EFR32ZG23 modem for air connection to compatible Z-wave Devices at the 908.4, 908.42, 916, 919.8 and 921 MHz and includes an embedded Antenna. These antennas are not removable and are not designed to be modified. Installation and Operation: 2 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Campbell, CA 95008 USA 1-855-476-5797 The module has three simple 8 pin receptacle interface for connections to other modules such as PowerG, Zigbee and other Security Radios. These additional modules are optional and will provide their own Antennas and FCC Licenses. The built in Z-Wave operates at 908.4, 908.42, 916, 919.8 and 921.4 MHz with an output power up to - 2.8 dBm. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications. FCC Compliance (Declaration of Conformity): FCCID: 2AAJXQS-IQP4Z Tradename: Qolsys Model Number: IQPanel 4 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Campbell, CA 95008 USA 1-855-476-5797 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body. Industry Canada Statement of Compliance: IC: 11205A-QSIQP4Z  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.  Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  This Class B digital apparatus complies with Canadian ICES-003.  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.  Cet appareil est conforme à la norme RSS-247 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible. 4 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Campbell, CA 95008 USA 1-855-476-5797  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.  Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.  The County Code Selection feature is disabled for products marketed in the US/ Canada.  La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 27 cm de distance entre la source de rayonnement et votre corps. Warranty Information: IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. will void the user’s authority to operate the equipment, as well as warranty for the product.

1 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797 Qolsys IQ4 Hub General Applications: The Qolsys IQ4 Hub features the Quectel Wireless module Model SC650T-NA with FCC ID: XMR2019SC650TNA providing cellular connections (E-UTRA-FDD) Bands 2, 4, 5, 7, 12, 13, 14, 25, 26 and 66. The Quectel module incorporates also provides WiFI 2.4 / 5 GHz and Bluetooth Low Energy 4.2 support. A main antenna and Diversity antenna are embedded on the Qolsys MB to support these features. Additionally the Qolsys IQ4 Hub includes a Zwave Daughtercard with EFR32ZG14 modem for air connection to compatible Z-wave Devices at the 908.4, 908.42 and 916 MHz for North America Market and includes an embedded Antenna. These antennas are not removable and are not designed to be modified. 2 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797 Installation and Operation: The module has three simple 8 pin receptacle interface for connections to other modules such as PowerG, Zigbee and other Security Radios. One slot is used for Zwave, resulting in only two additional available slots. These additional modules are optional and will provide their own Antennas and FCC Licenses. The built in Z-Wave operates at 908.4, 908.42, 916, 919.8 and 921.4 MHz with an output power up to - 2.8 dBm. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications. FCC Compliance (Declaration of Conformity): FCCID: 2AAJXQS-IQP4Z Tradename: Qolsys Model Number: IQ4 Hub 3 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body. Industry Canada Statement of Compliance: IC: 11205A-QSIQP4Z HVIN: IQ4 Hub  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.  Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  This Class B digital apparatus complies with Canadian ICES-003.  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 4 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797  This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.  Cet appareil est conforme à la norme RSS-247 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible.  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.  Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.  The County Code Selection feature is disabled for products marketed in the US/ Canada.  La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 27 cm de distance entre la source de rayonnement et votre corps. Warranty Information: IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. will void the user’s authority to operate the equipment, as well as warranty for the product.

1 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797 Qolsys IQ4 NS General Applications: The Qolsys IQ4 NS features the Quectel Wireless module Model SC650T-NA with FCC ID: XMR2019SC650TNA providing cellular connections (E-UTRA-FDD) Bands 2, 4, 5, 7, 12, 13, 14, 25, 26 and 66. The Quectel module incorporates also provides WiFI 2.4 / 5 GHz and Bluetooth Low Energy 4.2 support. A main antenna and Diversity antenna are embedded on the Qolsys MB to support these features. Additionally, the Qolsys IQ4 NS includes a Zwave module with EFR32ZG23 modem for air connection to compatible Z-wave Devices at the 908.4 MHz, 908.42 MHz and 916 MHz for North America Market and includes an embedded Antenna. These antennas are not removable and are not designed to be modified. 2 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797 Installation and Operation: The module has three simple 8 pin receptacle interface for connections to other modules such as PowerG, Zigbee and other Security Radios. One slot is used for Zwave, resulting in only two additional available slots. These additional modules are optional and will provide their own Antennas and FCC Licenses. The built in Z-Wave operates at 908.4, 908.42, 916, 919.8 and 921.4 MHz with an output power up to - 2.8 dBm. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications. FCC Compliance (Declaration of Conformity): FCCID: 2AAJXQS-IQP4Z Tradename: Qolsys Model Number: IQ4 NS 3 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body. Industry Canada Statement of Compliance: IC: 11205A-QSIQP4Z HVIN: IQ4 NS  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.  Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  This Class B digital apparatus complies with Canadian ICES-003.  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 4 US Responsible Party SUPPORT – QOLSYS Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA 1-855-476-5797  This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.  Cet appareil est conforme à la norme RSS-247 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible.  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.  Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.  The County Code Selection feature is disabled for products marketed in the US/ Canada.  La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 27 cm de distance entre la source de rayonnement et votre corps. Warranty Information: IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. will void the user’s authority to operate the equipment, as well as warranty for the product.

CFR 47 §2.911 (d)(5) Attestation Date: 02-15-2023 FCC ID: 2AAJXQS-IQP4Z To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Qolsys Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Qolsys Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Mark Skeen Job Title: Vice President Company Name: Qolsys Inc.

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: 02-21-2023 FCC ID: 2AAJXQS-IQP4Z To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Qolsys Inc. (“t he applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Contact Person: Mark Skeen Company Name: Qolsys Inc. Company US Address: 1919 S. Bascom Ave., Campbell, CA 95008, USA Email: [email protected] Sincerely yours, Name: Mark Skeen Job Title: Vice President Company Name: Qolsys Inc. Company Address: 1919 S. Bascom Ave., Campbell, CA 95008, USA Email: [email protected]

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: 07-12-2023 FCC ID: 2AAJXQS-IQP4Z To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Qolsys Inc. (“t he applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Contact Person: Mark Skeen Company Name: Qolsys Inc. Company US Address: 1919 S. Bascom Ave., Campbell, CA 95008, USA FRN: 0022572226 Email: [email protected] Sincerely yours, Name: Mark Skeen Job Title: Vice President Company Name: Qolsys Inc. Company Address: 1919 S. Bascom Ave., Campbell, CA 95008, USA Email: [email protected]

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 2023-02-02 Subject: Set up Statement To Whom It May Concern: We affirm by this letter that the device as described below will be mounted on the holder and then either be mounted on the wall or other place. Product: IQ Panel4 Model: IQ Panel FCC-ID: 2AAJXQS-IQP4Z Best Regards, _______________________________ Signature Name: Mark Skeen Title: Vice-President Company Name: Qolsys Inc. Address: 1919 S. Bascom, Suite 600, Campbell, CA 95008

Date: 2 /13/2023 Certification and Engineering Bureau Innovation, Science and Economic Development Canada (ISED Canada) Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern: I, the undersigned, hereby state that the following description of the Model differences between the IQ Panel4 family of products is accurate. IQ Panel4 family of products is currently comprised of our product Models IQ Panel4, IQ4 HUB and IQ4 NS. This product is a Home Security and Home Automation Control Panel. The following is a summary of these products and differences: a) Model IQ Panel4 is the flagship of this product line which incorporates a SiLabs chip that is integrated to provide Home Automation for use with the Zwave protocol. This product incorporates a high resolution touch screen, camera, speakers, battery backup and includes a FCC and ISED Certified LTE and/or LTE with 3G Cellular/WiFi/BLE module. In addition this product has three card slots which permit the installation of Qolsys and its affiliates of one of the following daughtercards covering PowerG (a Security Radio Card), Zigbee Protocol (Home Automation), and/or a Security Radio Card (@319 MHz or 345 MHz or 433 MHz). b) Model IQ4 HUB is identical to Model IQ Panel4 except the touch screen has lower resolution, no camera function, and fewer speakers. The cellular/WiFi/BLE module, Zwave, Zigbee, PowerG and SRF features remain the same. c) Model IQ4 NS is identical to IQ Panel4 except there is no touch screen, no camera and has fewer speakers (same as IQ4 HUB). Sincerely Yours, by / on: _______02/13/2023 Mark Skeen (signature / date) (print name) title: Vice President on behalf of: Qolsys Inc. (company name) Telephone & Email: 1-855-476-5797 & [email protected]

Date: 2/2/2023 UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA To whom it may concern: I, the undersigned, hereby authorize UL LLC to act on our behalf in all manners relating to application for equipment authorization of Home Security and Home Automation Control Panel, Model IQ Panel4, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until Dec. 31, 2023 or until written notice from Qolsys Inc whichever occurs earlier. Sincerely Yours, by / on: _______02/02/2023 Mark Skeen (signature / date) (print name) title: Vice President on behalf of: Qolsys Inc. (company name) Telephone & Email: 1-855-476-5797 & [email protected]

Date: 2/2/2023 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: 2AAJXQS-IQP4Z To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Antenna Information • Block Diagram • Bill of Materials • Theory of Operation (Operational Description) Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days from grant issue date: • External Photos – Excluding FCC Label Location • Internal Photos • Test Setup Photos • User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards _______________________________ Signature Name: Mark Skeen Title: Vice-President Company Name: Qolsys Inc. Address: 1919 S. Bascom Ave., Suite 600, Campbell, CA 95008

IQ Panel4 EXTERNAL PHOTOS Front View Right Side View Left Side View Bottom View Top View Backside View with Mounting cover

2AAJXQS-IQP4Z LABEL Contents: Permanent Label : Label is UL Certified with Adhesive designed to adhere to the specific plastic material. Location May contain Modules: MODEL: IQ Panel4 Contains SmartModule Quectel FCC ID: WP3PGMODEMLP P/N: IQP4004 FCC ID: XMR2019SC650TNA IC: 1467C-PGMODEMLP IC: 11205A-QSIQP4Z IC: 10224A-19SC650TNA FCC ID: 2AAJXQS-SRF319-4 FCC ID: 2AAJXQS-IQP4Z IC: 11205A-SRF3194 HVIN: QSIQP4Z FCC ID: 2AAJXQS-ZB IC: 11205AQS-ZB

2AAJXQS-IQP4Z LABEL Contents: Permanent Label : Label is UL Certified with Adhesive designed to adhere to the specific plastic material. Location May contain Modules: MODEL: IQ4 Hub Contains SmartModule Quectel FCC ID: WP3PGMODEMLP P/N: IQPH023 FCC ID: XMR2019SC650TNA IC: 1467C-PGMODEMLP IC: 11205A-QSIQP4Z IC: 10224A-19SC650TNA FCC ID: 2AAJXQS-SRF319H FCC ID: 2AAJXQS-IQP4Z IC: 11205A-QSSRF319H FCC ID: 2AAJXQS-ZB IC: 11205A-QSZB

2AAJXQS-IQP4Z LABEL Contents: Permanent Label : Label is UL Certified with Adhesive designed to adhere to the specific plastic material. Location May contain Modules: MODEL: IQ4 NS Contains SmartModule Quectel FCC ID: WP3PGMODEMLP P/N: IQPK047 FCC ID: XMR2019SC650TNA IC: 1467C-PGMODEMLP IC: 11205A-QSIQP4Z IC: 10224A-19SC650TNA FCC ID: 2AAJXQS-SRF319H FCC ID: 2AAJXQS-IQP4Z IC: 11205A-QSSRF319H HVIN: IQP4 NS FCC ID: 2AAJXQS-ZB IC: 11205A-QSZB

IQ Panel4 INTERNAL PHOTOS Backside View with Mounting cover Main PCB with optional Cards installed – Bottom Side Zwave Antenna Main PCB with no optional Cards installed – Bottom Side Main PCBA – Top Side Front of Panel showing LCD Int…

Text truncated - open the document above for the full version.