2AB876108IEEE 802.11ah sub 1 GHz Devices

HaLow-R User Quick Guide Product Overview LED Indicator / InterfaceDescriptions Power Indicator (Red) On – Power on Off – No power Wi-Fi HaLow Indicator (Amber) On – Wi-Fi HaLow is running properly Blinking – Wi-Fi HaLow is sending or receiving data Wi-Fi 2.4G Indicator (Amber) On – Wi-Fi 2.4G is running properly Blinking – Wi-Fi 2.4G is sending or receiving data Ethernet Indicator (Green) On – Ethernet port is connect Blinking – Ethernet is sending or receiving data System Indicator (Blue) Reset Button Blinking – System is running properly Reset Default - Press “Reset” button for 10 seconds HaLow Antenna ConnectorANT port is used to connect Wi-Fi HaLow ANT (SMA) Wi-Fi Antenna ConnectorANT port is used to connect Wi-Fi 2.4G ANT (RP-SMA) Ethernet PortRJ-45 connector for Fast Ethernet (LAN Port) Power PortRated DC 12V/1A 1 2 3 5 4 6 7 8 1 9 2 34 5 6 7 7 8 9 Application Scenario (1).Attach Antenna to the HaLow-R and rotate the antenna until it is tight. (2).Connect the HaLow-R and Computer’s LAN port for settings. (3).After setting is completed, please connect the Internet to the HaLow-R AP side. HaLow-R AP HaLow-R STA (Client) Internet Camera Open Setup Page and Login Open a browser then type 192.168.100.1 into the address bar to access the setup page, default username is “root” and no need password. After logging in, the “STATUS” page will be shown. How to Setup AP Mode Please go to the “MORSE → HaLow Configuration“ page. How to Setup AP Mode 1).Click “Access Point” page 2).Enable “Bridge” mode 3).IP Settings → “Static”, and fill the IP Address, Netmask, Gateway information. 4).After the setting is completed, please click the "Save" button. How to Setup AP Mode Please change the IP Address of the computer to the same network segment as HaLow-R. How to Setup AP Mode When the Client connects to the AP, it will be shown on the “STATUS” page. Note: When you reload the web page, please note whether you have changed the device IP! How to Setup Client Mode Please go to the “MORSE → HaLow Configuration“ page. Click “Station” page How to Setup Client Mode 1).Click “Scan” button for AP scan, and fill the password if need. 2).Enable “Bridge” mode 3).IP Settings → “Static”, and fill the IP Address, Netmask, Gateway information. 4).After the setting is completed, please click the "Save" button. How to Setup Client Mode Please change the IP Address of the computer to the same network segment as HaLow-R. How to Setup Client Mode Note: When you reload the web page, please note whether you have changed the device IP! When the Client connects to the AP, it will be shown on the “STATUS” page. How to Reset Default and Upload Firmware Please go to the “SYSTEM” page. Reset Default Upload Firmware HaLow-R Specifications WiFi 4 (IEEE 802.11n) ChipsetMediaTek MT7628AN FlashSPI Flash 32 MB RAMDDR2 SDRAM 128 MB WiFi standardIEEE 802.11n (2.4 GHz) Channel bandwidth20/40 MHz Max. date rate (Phy rate)300 Mbps Antenna connector2x RP-SMA connectors Antenna 2x 2.71 dBi dipole antenna WiFi HaLow (IEEE 802.11ah) ChipsetMorse Micro MM6108IQ WiFi standardIEEE 802.11ah Channel bandwidth1/2/4/8 MHz Max. date rate (Phy rate)Up to 32.5 Mbps @ Bandwidth 8 MHz Antenna connector1x SMA connector Antenna1x 2 dBi dipole antenna General Ethernet1x Fast Ethernet with ESD protection Button1x push-button (reset) LED1x Power 1x WiFi HaLow 1x WiFi 2.4G 1x Ethernet 1x Reset / System DC power jackPower rated: DC 12V / 1A Dimensions93 x 60 mm Operation Temperature-10°C~55°C CE statement Simplified EU Declaration of Conformity Hereby, ALFA NETWORK INC. declares that this Wireless Device HaLow-R product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of conformity can be found at www.alfa.com.tw Safety Notices 1. Operation temperature: -10°C~55°C. 2. This product is allowed to be used in all EU member states. 3. When using the device, keep the antenna at least 20 cm away from the human body. • Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. • DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. • DO NOT place or drop objects on top and do not shove any foreign objects into the product. • DO NOT expose to or use near liquids, rain, or moisture. • DO NOT use the product during electrical storms. • DO NOT cover the vents on the product to prevent the system from getting overheated. • DO NOT use damaged power cords, accessories, or other peripherals. • If the product/power adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or m…

Text truncated - open the document above for the full version.

,FRQQHFW $GG1R$O\/Q5XLJXDQJ5G1HLKX'LVW7DLSHL&LW\7DLZDQ 7HO )D[ (PDLODGPLQ#LFRQQHFWFRPWZ $WWHVWDWLRQ/HWWHU Date: 202 )('(5$/&20081,&$7,216&200,66,21 $XWKRUL]DWLRQDQG(YDOXDWLRQ'LYLVLRQ 2DNODQG0LOOV5RDG &ROXPELD0' Dear Sir or Madam: We,,FRQQHFW, hereby declare that the product:,(((DKVXE*+]'HYLFHV,)&&,'$% model:+D/RZ5+D/RZ0+D/RZ21+D/RZ21+D/RZ50+D/RZ5+D/RZ210 +D/RZ210+D/RZ50+D/RZ0+D/RZ;;;;;(X:stands for AnyDOSKDQXPHULFFKDUDFWHURUEODQN ZKLFKZDVWHVWHGE\&+,1$&(57,),&$7,21,&7&2/7' '21**8$1  7KHSURGXFWVXSSRUWV Wi-Fi HaLow0+]%DQGZLGWK0+] 0+]%DQGZLGWK0+] 0+]%DQGZLGWK0+] 0+]%DQGZLGWK0+]DQG*:,), 0+] EJQKW 0+] QKW 7KHRWKHUZDVGLVDEOHGDQGWKHHQGXVHUKDVQRFDSDFLW\WRDFWLYDWHLW Please contact me should there be need for any additional clarification or information. Best Regards, Signature: 3ULQWHG1DPH-RKQVRQ:DQJ 7LWOH0DQDJHU

Iconnect Add: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City, Taiwan TEL:886-2-27968477 FAX: 886-2-27968478 E-mail:[email protected] Authorization Letter Date: 2024-08-16 FE DERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Professional Installation Statement for FCC ID: 2AB876108 Dear Sir or Madam, Pl ease be notified that we, the undersigned, state that our device requires professional installation based on the following reasons: 1 this device wil l not be sold to the general public , it wil l be sold to dealers only. 2 this device requires controlled installation location by professional installers. 3 the device requires professional configuration for use. 4 Pr ofessional installation does not permit use of any o ther antenna with the transmitter. 5 It will not be removed after professional in stallation. These statements above apply to the following project: Product name: IEEE 802.11ah sub 1 GHz Devices, Models: HaLow-R, HaLow-M485, HaLow-ON, HaLow-ON2, HaLow-RM, HaLow-R2, HaLow-ONM,HaLow-ONM2 ,HaLow-RM 2,HaLow-M4852,HaLow-XXXXX (X:Any alphanumeric character or blank) Pl ease contact me if you have any question. Sincerely, Signature: Pr inted Name: Johnson Wang Title: Manager

Iconnect Add: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City, Taiwan Tel: 886-2-27968477 Fax: 886-2-27968478 Email: [email protected] ATTESTATION STATEMENT Date: 2024- FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing )&&,'$% Iconnect, certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And Iconnect, certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Printed name: Johnson Wang Title: Manager Signature:

U.S. AGENT LETTER OF ATTESTATION Date: 2024- FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref:$WWHVWDWLRQ6WDWHPHQWV3DUW G  )LOLQJ FCC ID:$% Iconnect certifies that, as of the date of the filing of the application, Y5Shop LLc. is our designated U.S. agent for service of process for the above referenced FCC ID. Iconnect accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Y5Shop LLc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Y5Shop LLc. Address: 2725 AUTUMN LN,FRISCO,TEXAS,USA FRN: 0033834391 Tel.: 469 636 2888 Email: [email protected] Signed by (printed name): Wang Chiang-Sheng Signature: Applicant: Iconnect Add: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City, Taiwan FRN: 0023545262 Tel: 886-2-27968477 Fax: 886-2-27968478 Email: [email protected] Signed by Printed name: Johnson Wang Signature:

QA-FR-170-B Iconnect Add: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City, Taiwan Tel: 886-2-27968477 Fax: 886-2-27968478 Email: [email protected] FCC Authorization Date: 2024- FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Iconnect, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed name: Johnson Wang Title: Manager

QA-FR-171-A Iconnect Add: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City, Taiwan Tel: 886-2-27968477 Fax: 886-2-27968478 Email: [email protected] FCC Confidential Authorization Date:2024- FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:$% In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Iconnect, hereby requests long-term confidential treatment of information accompanying this application as outlined below: xBlock Diagram xSchematics x Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed name: Johnson Wang Title: Manager

Iconnect Add: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City,Taiwan TEL:886-2-27968477 FAX: 886-2-27968478 E-mail:[email protected] DECLARATION OF SIMILARITY Date: 202 )('(5$/&20081,&$7,216&200,66,21 $XWKRUL]DWLRQDQG(YDOXDWLRQ'LYLVLRQ 2DNODQG0LOOV5RDG &ROXPELD0' Dear Sir or Madam: We, Iconnect, hereby declare that the product:,(((DKVXE*+]'HYLFHV,)&&,'$% model:+D/RZ0+D/RZ21+D/RZ21+D/RZ50+D/RZ5+D/RZ210 +D/RZ210+D/RZ50+D/RZ0+D/RZ;;;;; ;$Q\DOSKDQXPHULFFKDUDFWHURUEODQN are electrically identical with the model:+D/RZ5which was tested by&KLQD&HUWLILFDWLRQ,&7&R/WG 'RQJJXDQ ZLWKWKHVDPHHOHFWURPDJQHWLFHPLVVLRQVDQGHOHFWURPDJQHWLFFRPSDWLELOLW\FKDUDFWHULVWLFV A description of the differences between thHVHmodels and that are declared similar are as follows:They are the same product, and just the different model nameVIRUGLIIHUHQWFXVWRPHUVDQGGLIIHUHQWFRXQWULHVthe rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Johnson Wang Title: Manager

China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 1 of 9 EUT EXTERNAL PHOTOGRAPHS Wi‐Fi Chain 0 Antenna Wi‐Fi Chain 1 Antenna Wi‐Fi HaLow Antenna China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 2 of 9 Wi-Fi HaLow Antenna China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 3 of 9 Wi-Fi Chain 0 Antenna China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 4 of 9 Wi-Fi Chain 1 Antenna China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 5 of 9 China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 6 of 9 China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 7 of 9 China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 8 of 9 China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐EXP Page 9 of 9

China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐INP Page 1 of 3 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐INP Page 2 of 3 China Certification ICT Co., Ltd (DongGuan) No.:2403U79820E‐RF‐INP Page 3 of 3

RF EXPOSURE EVALUATION Applicant: Iconnect Address: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist.,Taipei City,Taiwan FCC ID: 2AB876108 Product Name: IEEE 802.11ah sub 1 GHz Devices Standard(s): 47 CFR §1.1307, 47 CFR §2.1091 447498 D04 Interim General RF Exposure Guidance v01 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2403U79820E-RF-00D Date Of Issue: 2024/8/8 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 2 of 8 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 3 of 8 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 2403U79820E-RF-00D Original Report 2024/8/8 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 4 of 8 1. GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) EUT Name: IEEE 802.11ah sub 1 GHz Devices Trade Name: ALFA EUT Model: HaLow-R Multiple Model: HaLow-M485, HaLow-ON, HaLow-ON2, HaLow-RM, HaLow-R 2, HaLow-ONM, HaLow-ONM2, HaLow-RM2, HaLow-M4852, HaLow-XXXXX(X: Any alphanumeric character or blank) Rated Input Voltage: DC 12V from adapter EUT Received Date: 2024/6/7 EUT Received Status: Good Note: The multiple models are electrically identical with the test model. Please refer to the declaration letter for more detail, which was provided by manufacturer. China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 5 of 8 2. RF EXPOSURE EVALUATION 2.1 Applicable Standard FCC §15.247 (i) and subpart §1.1307 Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. 2. 2 Procedure According to §1.1307(b)(3)(ii)(B) Simultaneous Transmission with both SAR-based and MPE-Based Test Exemptions This case is described in detail in § 1.1307(b)(3)(ii)(B) and covers the situations where both SAR- based and MPE-based exemption may be considered for test exemption in fixed, mobile, or portable device exposure conditions. For these cases, a device with multiple RF sources transmitting simultaneously will be considered an RF exempt device if the condition of Formula (1) is satisfied. Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 6 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 7 of 8 2.3 Measurement Result Radio Frequency (MHz) λ/2 Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP dBmmW HaLow 903.5-926.5 52.85 200 463 24.5 2.00 24.35 272.27 Wi-Fi 2412-2462 19.80 200 768 23.5 2.71 24.06 254.68 Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. The HaLow and Wi-Fi can transmit simultaneously. =ERP HaLow / ERP th + ERP Wi-Fi / ERP th =272.27/463 + 254.68/768 =0.920 < 1.0 Result: The device meet FCC MPE at 20 cm distance. China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00D Page 8 of 8 3. EUT PHOTOGRAPHS Please refer to the attachment 2403U79820E-RF-EXP EUT EXTERNAL PHOTOGRAPHS and 2403U79820E-RF-INP EUT INTERNAL PHOTOGRAPHS ===== END OF REPORT =====

Indoor Dipole Antenna 915 MHz © ALFA Network Inc. / ARS-915Pdatasheet ver. 1 Specifications and descriptions may change at any time without prior notice [email protected] www.alfa.com.tw ARS-915P Frequency Range902 –928 MHz Gain2 dBi V.S.W.R≤ 2.0 Radiation Omni PolarizationVertical Impedance50 Ω ConnectorSMA male Dimensions⌀13.3 x 195 mm Weight20 g Temperature-40 °C to 85 °C Humidity95% @ 25 °C Specifications PatternV.S.W.R Add:4F-1, No.106, Ruiguang Rd., Neihu Dist., Taipei City 114, Taiwan

Specification For Approval Date: 2010 / 10 / 19 File No.: 100319003 Version: 1.0 Customer： Customer P/N： P/N： ARS-N02 Description : Antenna Cortec Checked By: Customer Approved By: Add:4F-1, No.106, Ruiguang Rd., Neihu Dist., Taipei City 114, Taiwan Index: 1. Specification 2. Characteristics and Reliability Test 3. Antenna - S Parameter Test Data 4. Antenna - Radiation Pattern Test Data 5. Mechanical and Packing Drawing 6. Material Description and RoHS Test Report 1. Specification Sample Photo A. Electrical Characteristics Frequency 2400 ~ 2500 MHz S.W.R. <= 2.0 Antenna Gain 2.0±0.7dBi Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator Cu Material of Plastic Body: TPE Hinge: PA+ABS Holder: PA+ABS Cable Type RG-178 Connector Type SMA Male Reverse Connector Pull Test >= 3 Kg Connector Torque Test 200~600g.cm C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C 2. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop Height: 1.5 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test MIL-STD-202G, 211A, cond. E Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2002/95/EC R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC 3. Antenna - S Parameter Test Data 4. Antenna - Radiation Pattern Test Data Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna 5. Mechanical Drawing See attached files 6. Material Description and RoHS Test Report See attached files 1 3 4 5 2 ± 0.3 DESIDNE D BY CHECKED BY TITLE: DESCRI PTI ON SI G N DATE AP PROVER ± 0.1 ± 1 ° X ° X.XX. XX Tol eran ce APPRO VED BY REV ISIO N: A UNI TS: mm SC ALE: 1:1 DC B Eletrodepos iti on Black TPE Materi al 1112 4 2 Body-3 NO. Des crip tion Body-1 1 Fin ish 3 Pin Q'ty Body-2 SMA Mal e Re verse 1 5 Part Num ber AN -03 AN -02 AN -1 Cu Zn Black pl ated Black Black 20 10 .02.05 20 10.02 .05 2010 .02 .05 No te: 1.D imens io n: T ake ʳ is the importan t di men sion 2.T oler ance: Un mark ed toleran ce refer to the standa rd tole ran ce p leas e. 2.4 GHz A ntenna PA+ABS PA+A BS AN -10B SMA Cu Down plastic cover 3.Put 10 bundles products (1000pcs) into out Carton . 2.Tie up every 5 pieces down plastic cocvers(100PCS)with full of Anetnnas and add a up plastic cover. Up plastic cover 4.Pack the out Carton,paste RoHS label on the out Carton. Customer： Revision：A Part Name :AP Antenna page: 1 of 1 Date ：2010/10/23 Part Number : ARS-N02 Packing Criterion 1.Put the Anetnna into down cover every down cover pack 20pcs Anetnnas View 2 Carton RoHS label Down plastic cover

TEST REPORT Applicant: Iconnect Address: No.9, Aly. 58, Ln. 112, Ruiguang Rd., Neihu Dist., Taipei City,Taiwan FCC ID: 2AB876108 Product Name: IEEE 802.11ah sub 1 GHz Devices Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2403U79820E-RF-00B Date Of Issue: 2024/8/2 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00B Page 2 of 58 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: 2403U79820E-RF-00B Page 3 of 58 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 9 1.2.1 EUT Operation Condition: ............................................................................................................................. 9 1.2.2 Support Equipment List and Details .............................................................................................................. 9 1.2.3 Support Cable List and Details ...................................................................................................................... 9 1.2.4 Block Diagram of Test Setup ....................................................................................................................... 10 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 11 2. SUMMARY OF TEST RESULTS .......................................................................................... 12 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 13 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 13 3.1.1 Applicable Standard ..................................................................................................................................... 13 3.1.2 EUT Setup.................................................................................................................................................... 14 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 14 3.1.4 Test Procedure ............................................................................................................................................. 15 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 16 3.2.1 Applicable Standard ..................................................................................................................................... 16 3.2.2 EUT Setup.................................................................................................................................................... 16 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 3.2.4 Test Procedure ...................................................................................…

Text truncated - open the document above for the full version.