2ABFHVT-9512RXWireless Camera Panner

Wireless PannerOperating Instructions Wireless Panner Specs 1. Distance:Up to 10 meters 2. Charging power: 5V/500mA 3. Power consumption: 0.2W 4. Battery: 3.7V/2200mA 5. Remote battery FCC ID:2ABFHVT-9512RX VT-9512RX Diagram of features: A: Power button [on panner] B: LED light [on panner] C: Left control button: pans to the left [on remote] D: Right control button: pans to the right [on remote] E: Charging port [on panner] Operation : Deploy the camera: Lower your camera to the desired depth, then position the cable in the u-shaped channel on the bottom of the panner. Use the retainer clip to anchor the camera cable in place. Open the legs of the panner and position it above the hole in the ice. Turn on and operate the panner: Press and hold the power button (A) about 3-4 secondsuntil the light is on. Press the C or D button to pan left or right. Turn off the panner: Press and hold the power button (A) for about 3-4 secondsuntil the light is off. FCC ID:2ABFHVT-9512TX VT-9512TX TROUBLE SHOOTING: 1. Pairing: Turn on the wireless panner, and quickly press the power button (A) 3 times in 3 seconds. Next, pressand hold either button(C or D) on the remoteuntilthe motor is rotating to left or right. This means that the pairing is OK,and the wireless panner can be controlled by this remote. 2. Using a new remote: If the remote is lost, you first must order a new remote. Once you have a new remote: Step 1: Turn on the wireless panner, and quickly press the power button (A) 6 times in 6 seconds, the LED light will turn off automatically in 10 seconds. Step 2: Turn the wireless panner back on and quickly press the power button (A) 3 times in 3 seconds; Step 3: Press and hold either button(C or D) of the new remoteuntil the motor is rotating to left or right. This means that thepairing is OK, and the wireless panner can be controlled by this remote. 3. Charging instruction: 1. When the panner is charging, the LED light will be pulsing slowly. 2. When it hasfully charged, the LED light will stop pulsing andalwaysbe on. 3. If the charger is disconnected during the charging process, the panner will be turned offautomatically. 4. When the panner is working, a steadyLED light means a fully charged battery. If the light is flickering in a pattern, the number of flickers indicates the battery strength out of a possible 4 levels. [Example: the light flickering in a repeating pattern of 2 indicates battery strength is 2 out of 4. 5. The LED lightflickeringvery quickly indicates the battery does not have sufficient power. N OTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device meets RF Exposure requirements without any restriction.

VIDEOTEK COMPANY LIMITED Bldg 12, Section B, BaoSheng Industrial Area, BaiNikeng, PingHu Town,shenzhen,china TEL: 0755-33826808 FAX: 0755-82977631 Jul.22, 2015 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Subject: Explanation of differences between product types FCC ID : 2ABFHVT-9512RX Model Number: VT-9512RX, 857224002651 To Whom It May Concern: We, VIDEOTEK COMPANY LIMITED, hereby declare that the model : 857224002651 is identical with the model : VT-9512RX, except the model name. Except for the different above, no other modification is performed. Sincerely, VIDEOTEK COMPANY LIMITED Signature: Company Officer: Zou Yu Lan Telephone Number: 0755-33826808 Email: [email protected]

VIDEOTEK COMPANY LIMITED Bldg 12, Section B, BaoSheng Industrial Area, BaiNikeng, PingHu Town,shenzhen,china TEL: 0755-33826808 FAX: 0755-82977631 Date (20/07/2015) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: 2ABFHVT-9512RX Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, VIDEOTEK COMPANY LIMITED hereby requests permanent confidential treatment of information accompanying this application as outlined below: 1.Schematics 2.Bill of Materials/Parts List 3.Block Diagrams 4.Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Zou Yu Lan Telephone Number: 0755-33826808 Email: [email protected]

External Photos ALL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location wireless camera panner Brand: MarCum Model: VT-9512RX FCC ID: 2ABFHVT-9512RX wireless camera panner Model: VT-9512RX FCC ID: 2ABFHVT-9512RX

Internal Photos OPEN VIEW OF EUT INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-4

FCC ID APPLI PROD U BRAND MODE CLIEN DATE O STAND REPOR A CAUTIO This rep laborato D CATION P U UCT DESIG D NAME EL NAME T OF ISSUE DARD(S) RT VERSIO Attestat ON: port shall n ory and sha FC Rep URPOSE GNATION ON tion of G not be repro all not be q C Te port No.: : 2ABF : Origi : wirel : : VT‐9 : VIDE : Jun.2 : FCC P : V1.0 Global C oduced exc uoted out o est R AGC0176 FHVT‐9512 inal Equipm less camer 9512RX, 85 EOTEK COM 25, 2015 Part 15 Rul Complia ept in full w of context. Rep 65150502 2RX ment a panner 72240026 MPANY LIM les ance (Sh without the port 2FE01 51 MITED henzhen e written p t n) Co., L ermission Page 1 Ltd of the test of 23 AGC01765150502FE01 Page 2 of 23 Report Revise Record Report Version Revise Time Issued Date Valid VersionNotes V1.0 / Jun.25, 2015Valid Original Report AGC01765150502FE01 Page 3 of 23 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ...................................................................................... 4 2. GENERAL INFORMATION .................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................... 5 2.2. RELATED SUBMITTAL(S) / GRANT (S) ....................................................................................... 5 2.3. TEST METHODOLOGY ................................................................................................................ 5 2.4. SPECIAL ACCESSORIES ............................................................................................................ 5 2.5. EQUIPMENT MODIFICATIONS ................................................................................................... 5 3. MEASUREMENT UNCERTAINTY........................................................................................ 6 4. DESCRIPTION OF TEST MODES ........................................................................................ 6 5. SYSTEM TEST CONFIGURATION ...................................................................................... 6 5.1. EQUIPMENT USED IN EUT SYSTEM ......................................................................................... 6 5.2. SUMMARY OF TEST RESULTS .................................................................................................. 6 6. TEST FACILITY .................................................................................................................... 7 7. RADIATED EMISSION ......................................................................................................... 8 7.1. MEASUREMENT PROCEDURE .................................................................................................. 8 7.2. TEST SETUP .............................................................................................................................. 10 7.3. TEST RESULT ............................................................................................................................ 11 8. FCC LINE CONDUCTED EMISSION TEST ....................................................................... 13 8.1. LIMITS OF LINE CONDUCTED EMISSION TEST ..................................................................... 13 8.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .................................................. 13 8.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ................................ 14 8.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST .............................................. 14 8.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ........................................................ 15 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ............................................................... 17 APPENDIX B: PHOTOGRAPHS OF EUT .............................................................................. 18 1 A A M A P B T S M D D C R W T e t h th . VERIFIC Applicant Address Manufacture Address Product Des Brand Name Test Model Series Mode Model Differe Date of test Deviation Condition of Report Temp We hereby ce The above eq valuation, te he procedur his report is CATION OF er signation e el ence f Test Samp plate ertify that: quipment wa est procedur es given in A in complian F CONFOR VIDEO Bldg, 1 Shenz h VIDEO Bldg, 1 Shenz h wireles VT-951 857224 All the Jun.18 None ple Norma AGCRT as tested by res, and equ ANSI C63.4 ce with radi a Prepar Chec k Authori z RMITY OTEK COMP 2, Section B hen, CN OTEK COMP 2, Section B hen, CN ss camera p 12RX 4002651 same excep 8, 2015 to Ju al T-US-BR/RF y Complianc uipment con (2003) and ated emissio red By ked By zed By PANY LIMIT B, Baosheng PANY LIMIT B, Baosheng anner pt for the mo un.24, 2015 F (2013-03-0 ce Certificatio figurations s the energy on limits of F Sally W Max Zh Solger Z ED g Industrial A ED g Industrial A odel name. 01) on Services shown in thi emitted by t FCC Rules P Wu hang Zhang Area, Bainik Area, Bainik (Shenzhen) s report wer the sample Part . Jun.25, 201 Jun.25, 201 Jun.25, 201 AGC017 keng, Pinghu keng, Pinghu ) Inc. The tes re made in a EUT tested 5 5 5 765150502F Page 4 o u town, u town, st data, data accordance as describ e FE01 of 23 a with ed in AGC01765150502FE01 Page 5 of 23 2. GENERAL INFORMATION 2.1. PRODUCT DESCRIPTION A major technical description of EUT is described as following Operation Frequency The EUT is only a receiver at 315MHz Field Strength(3m) 29.46dBuV/m(PK)@3m Modulation ASK Number of channels 1 Hardware Version N/A Software Version N/A Antenna Designation Fixed antenna Antenna Gain 2dBi EUT Supply DC 12.0V by adapter Adapter Supply AC 120V/60Hz 2.2. RELATED SUBMITTAL(S) / GRANT (S) This submittal(s) (test report) is intended for FCC ID: 2ABFHVT-9512RX filing to comply with Section 15.107&109 of the FCC Part 15, Subpart B Rules. 2.3. TEST METHODOLOGY Both conducted and radiated testing was performed according to the procedures in ANSI C63.4 (2003). Radiated testing was…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP LINE CONDUCTED EMISSION TEST SETUP RADIATED EMISSION TEST SETUP