2ABGL-0032.4G Remote Control

1 t WARNING! This manual contains important safety and use information. Keep this manual for future reference. • An adult must read this entire manual • Adult supervision is required at all times 6V GRANTURISMO MC STRADALE K T1548I • K T1549I Age: 3 - 5 years Weight: Maximum 77 lbs (35 kg) Maximum Speed: 2.5 MPH Battery: 6V7AH 2 -- Safety 1 WARNING FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS INJURY OR DEATH. The owner’s manual contains assembly, use and maintenance instructions. Safe Riding Warnings • Not to be used by children under three (3) years of age or children over seven (5) years of age • Do not exceed the maximum weight capacity of 77 lbs (35 KG) • Do not allow more than one (1) rider. ADULTS AND SUPERVISORS, PLEASE NOTE: 1. Always instruct all children of common sense rules and safe practices. 2. Be aware that flat, hard surfaces provide the safest experience for child riders. 3. Do not allow the child rider to operate the ride-on toy near streets, roads, sidewalks, walkways, or any other place where they may encounter other moving vehicles. 4. Never leave children unattended with this ride-on toy. Continuous adult supervision is required. 5. If necessary, adults and supervisors are always responsible for setting up gates and barriers to ensure a safe riding environment for the child rider. Child Safety Warnings • Adults supervising children must read and understand this entire manual before allowing any child to use this product. • Adults must evaluate their own children as to maturity, strength, judgment and ability to follow safety rules. Published age guidelines are not a substitute for careful evaluation of your own child. • Adults must teach children about thinking ahead while riding as this may be the first time a child has ever controlled a motorized ride-on toy. While you supervise, see through the child’s eyes, and verbally teach them about steering and avoiding obstacles in the approved riding area. • Riding a motorized ride-on toy can be a dangerous activity, even under the best of circumstances. Good choices regarding where and when to ride, constant adult supervision of riding, and practice and careful riding by the child can all help to minimize risk. However this ride-on toy is intended to move and therefore it is possible for the rider to lose control, fall off and/or get into dangerous situations that no amount of care, instruction or expertise can eliminate. • If this inherent risk is not acceptable, adults should not allow children to ride this ride-on toy. 3 -- WARNING 6. Be aware that this ride-on toy does not have braking capabilities. Allowing use of this ride-on toy in areas that require braking may cause rolls, crashes, serious injury, or death to the child rider. 7. Teach children not to allow other children to use this ride-on toy. Communicate this message to other adults and supervisors of fellow children with which your child interacts. 8. Sternly alert children that hands, legs, hair, and clothing can potentially get caught in moving parts. Ensure they never place a body part or piece of clothing near a moving part of the ride-on toy. Avoid loose clothing. 9. Instruct children to always wear shoes when using the ride-on toy. 10. Confirm that children do not have access to the charging equipment or come into contact with any part of the ride-on toy while it is charging. 11. Firmly instruct children to use the ride-on toy in a safe manner. Unsafe behaviors include, but are not limited to: • Traveling at unsafe speeds • Not riding in the seated position • Riding at night or in any conditions of low visibility • Riding in any wet conditions including rain, snow, and ice • Any kind of stunt riding: jumps, ramps, stairs, hills, sloped surfaces, or other actions involving any notable risk • Any kind of off-road riding: rough terrain, dirt, mud, gravel, or any others that involve notable risk • Riding near any pool or open body of water • Pushing, pulling, or shoving the driver in any way while operating the ride-on toy • Using the ride-on toy without the battery cover or any other safety cover fully closed • Pulling or hitching the ride-on toy with other similar moving ride-on toys or products 4 WARNING • Battery posts, terminals and related accessories contain lead and lead compounds (acids) chemicals and are toxic and corrosive. Never open the battery. • Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact or exposure occurs with the skin or in the eyes, or if the chemical is swallowed, immediately call 911. Battery and Charging Warnings The following safety hazards may result in serious injury or death to the user of the ride-on: • Use of a battery or charger other than the supplied rechargeable battery and charger may cause a fire or explosion. Only use the supplied rechargeable battery and charger with the ride-on toy. • Do not charge the battery near heat or flammable materials. • Using the rechargeable battery and charger for any other product many result in overheating, fire or explosion. Never use the rechargeable battery and charger with another product. • Contact between the positive and negative terminals may result in fire or explosion. Avoid direct contact between the terminals. Lifting the battery by the wires or charger can cause damage to the battery and may result in a fire. Always lift the battery by its case or handles. Corrosive Material Warnings Flammable and Explosive Materials Warnings • Plug wall charger directly into a wall outlet. Do not use an extension cord when charging as the use of an extension cord can cause a fire. • Liquids on the battery may cause fire or electric shock. Always keep all liquids away from the battery and keep the battery dry. • Tampering or modifying the electric circuit system may cause a shock, fire or explosion and permanently damage the system. Exposed wiring, circuitry in the charger may cause electric shock. Always keep the charg…

Text truncated - open the document above for the full version.

PACIFICCYCLE' 4902 Hammersley Road Madison, WI 53711 Date: 12/3/2019 Reouest for Confidentialitv Subject: Confidentiality Request for: FCC ID: 2ABGL-003 P ursuant to FCC 4 7 CFR 0.457( d) and 0.459 , the applicant requests that a part o f the subject FCC application be held confidential. Type of Confidentiality Requested 口Sh01iTerm因Permanent 口ShortTerm 口ShortTerm 口Permanent * 1 Exhibit Block Diagrams External Photos Int巳rnal Photos 口Sh01iTerm 囚Permanent 口ShortTerm 口Permanent Operation Desc1巾tion/Theory of Operation Parts List & Placement/BOM 口ShortTerm 口ShortTerm 口ShortTerm 口ShortTerm 口Permanent 因Permanent 口Permanent *3 Tune-Up Procedure Schematics Test Setup Photos User ’ s Manual Pacific Cvcle Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available t。 ” competition"would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: T he applicant requests the exhibits selected above as short term confidential be withheld from public view for a p eriod of 一＿ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is a lso aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: l C currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. ：；二44-主 Print Name: Rvan Shiroma Title: Sr. Oualitv Manae:er 1 - The asterisked items ( * ) require further info1 mation to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for DOI found at: httos://apps. fcc.eov/oetcf/ kdb/fonn s/FTSSearchResullPage.cfm?swi!ch=P&id=417 3 I and review section II, 3) regarding specific information that must accompany these requests. A Divisio叫（X )PR1电号与 cann。ndale－.号�SCHWINN' ffl。”，。。”CAι．， ROl'IDMl'ISTSR HIDDIBX G 9

External photo

Internal photo Antenna

Pacific Cycle Inc. RF TEST REPORT Report Type: FCC Part 15.249 & ISED RSS-210 RF report Model: 003 REPORT NUMBER: 191002176SHA-001 ISSUE DATE: Dec 28, 2019 DOCUMENT CONTROL NUMBER: TTRF15.249_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.249_V1 © 2018 Intertek Page 2 of 25 Report no.: 191002176SHA-001 Applicant: Pacific Cycle Inc. 4902 hammersley Road madison, WI 53711 Manufacturer: PINGHU WEIKESI CHILDREN TOYS CO., LTD. No.358 Yousheng Duan, Provincial Highway 01, Dushan Harbor Town, Pinghu, Zhejiang, China Manufacturing site: PINGHU WEIKESI CHILDREN TOYS CO., LTD. No.358 Yousheng Duan, Provincial Highway 01, Dushan Harbor Town, Pinghu, Zhejiang, China FCC ID: 2ABGL-003 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2019): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-210 Issue 9 (August 2016): Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS-Gen Issue 5 (March 2019) Amendment 1: General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Daniel Zhao Report No.: 191002176SHA-001 TEST REPORT TTRF15.249_V1 © 2018 Intertek Page 3 of 25 Content REVISION HISTORY................................................................................................................................................ 4 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 5 1 GENERAL INFORMATION ............................................................................................................................. 6 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 6 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 6 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 7 2 TEST SPECIFICATIONS ................................................................................................................................... 8 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 8 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 8 2.3 TEST SOFTWARE LIST ............................................................................................................................................ 8 2.4 TEST PERIPHERALS LIST ......................................................................................................................................... 8 2.5 TEST ENVIRONMENT CONDITION: ............................................................................................................................ 8 2.6 INSTRUMENT LIST ................................................................................................................................................ 9 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 10 3 RADIATED EMISSION ................................................................................................................................. 11 3.1 LIMIT .............................................................................................................................................................. 11 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 11 3.3 TEST CONFIGURATION ........................................................................................................................................ 13 3.4 TEST RESULTS OF RADIATED EMISSIONS ................................................................................................................. 15 4 POWER LINE CONDUCTED EMISSION ......................................................................................................... 20 4.1 LIMIT .............................................................................................................................................................. 20 4.2 TEST CONFIGURATION ........................................................................................................................................ 20 4.3 MEASUREMENT PROCEDURE .......................................................................…

Text truncated - open the document above for the full version.

Test Setup