
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Dual docking clock radio speaker CIL-E-6 TBA GB-1 Some Dos And Don't On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. *********************************** DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and intercon- nections between the pieces of equipment) are properly made and in accordance with the manufac- turer’s instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat. *********************************** DON’T remove any fixed cover as this may expose dangerous voltages. DON’T obstruct the ventilation openings of the equipment with items such as newspaper, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment. DON’T place hot object or naked flame sources such as lighted candles or night-lights on, or close to equipment. High temperatures can melt plastic and lead to fires. DON’T use makeshift stands and NEVER fix legs with wood screws-to ensure complete safety al- ways fit the manufacturer’s approved stand or legs with the fixings provided according to the instruc- tions. DON’T use equipment such as personal stereos or radios so that you are distracted from the require- ments of traffic safety. It is illegal to watch television whilst driving. DON’T listen to headphones at high volume, as such use can permanently damage your hearing. DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equip- ment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way-switch off, withdraw the mains plug and consult your dealer. ABOVE ALL, - NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock; - NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry! *********************************** BTD612_chelsea_41014711_27 May 14.indd 12014-6-10 16:20:05 GB-2 To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure. Important Notes * Keep instructions: the safety and operating instructions should be retained for future reference. * Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. On top of other stereo equipment that radiate too much heat. Places lacking ventilation or dusty places. Places subject to constant vibration. Humid or moist places, the use of apparatus in moderate climates. * Make sure not to obstruct the ventilation openings. * Before turning on the power for the first time, make sure the power cord is properly installed. * Mains plug is used as the disconnect device and it shall remain readily operable. * The product shall not be exposed to dirpping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. * To completely disconnect the power input, the mains plug of apparatus shall be disconnected from the main. Unplug the unit from the wall outlet before storms to prevent damage due to lightning and any power fluctuation. * When the standby LED and display are not illuminated; this inducates that the power switch is set to off or the set is disconnected from the mains. * Minimum distances 10cm around the apparatus for sufficient ventilations. * Attention should be drawn to the environmental aspects of battery disposal. * The mains plug should not be obstructed or should be easily accessed during intended use. * The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-clothes, curtains etc. * No naked flame sources such as lighted candles should be placed on the apparatus. * Battery shall not be exposed to excessive heat such as sunshine, fire or the like. For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personel. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN BTD612_chelsea_41014711_27 May 14.indd 22014-6-10 16:20:05 GB-3 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING. Note: - This unit will become warm when used for a long period of time. This is normal and does not indicate a problem with the unit. - If unusual conditions occur in the display or buttons, switch the unit off then turn on the unit again. - Under the influence of electrostatic phenomenon, the product may malfunction and require user to power reset. - The marking p…
Text truncated - open the document above for the full version.
ai ZhongShanCityLITAIElectronicIndustrialCo.,Ltd Date:May23,2014 FederalCommunicationsCommission AuthorizationandEvaluationDivision FCCID:2ABM5-BTD612 ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommission’sRules,theApplicanthereby requestsconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: 1.Blockdiagram 2.Schematics 3.OperationDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleased tothepublic.Thepublicdisclosureofthesemattersmighttoharmfultotheapplicantand provideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentationwillnotbemadebeforethedateofthegrantforthisapplication. Sincerely, Name:YukiC Companyname: ZhongShanCityLITAIElectronicIndustrialCo.,Ltd Tel.:+86-760-23808322 Fax:+86-760-23808800 Mail: [email protected]
ZhongShanCityLITAIElectronicIndustrialCo.,Ltd AGENCYAUTHORIZATIONLETTER FCCID:2ABM5-BTD612 Date:May23,2014 Towhomitmayconcern: We,theundersigned,herebyauthorizeBureauVeritasShenzhenCo.Ltd DongguanBranch.,toactonourbehalf,asouragent,inthefollowingmatters relatedtotheFCCapprovalofourproducts:reportsubmittal,related correspondence,thesigningofalldocumentsrelatingtothesematters,andany otherlawfulactivitynecessarytoobtainsuchcertification.Anyactcarriedoutby BVDGwithinthescopeofthisauthorizationshallhavethesameeffectsasour own. Thisauthorizationshallexpire6monthsformoriginaldate.Ifyouhaveany Questionsregardingtheauthorization,pleasedon’thesitatetocontactus. Thankyou. Sincerely, Name:YukiCai Companyname: ZhongShanCityLITAIElectronicIndustrialCo.,Ltd Tel.:+86-760-23808322 Fax:+86-760-23808800 Mail: [email protected]
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Test Report No.: 140430N037 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Test Report No.: 140430N037 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Test Report No.: 140430N037 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Test Report No.: 140430N037
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 7 Report Version 1 Test Report No.: 140430N037 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 7 Report Version 1 Test Report No.: 140430N037 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 7 Report Version 1 Test Report No.: 140430N037 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 7 Report Version 1 Test Report No.: 140430N037 ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 7 Report Version 1 Test Report No.: 140430N037 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 7 Report Version 1 Test Report No.: 140430N037 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 7 of 7 Report Version 1 Test Report No.: 140430N037
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 33 Report Version 1 Test Report No.: RF140430N037 TEST REPORT Applicant Zhong Shan City LI TAI Electronic Industrial Co., Ltd Address No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China Manufacturer or Supplier Zhong Shan City LI TAI Electronic Industrial Co., Ltd Address No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China Product Docking System for iPhone/iPod/iPad Brand Name ; neon Model CIL-E-6 Additional Model & Model Difference BTD612; See section 3.1 Date of tests April 30 ~ May 19, 2014 The submitted sample of the above equipment has been tested according to the requirements of the following standards: FCC Part 15, Subpart C, Section 15.249(2012-10) CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Venless Long Project Engineer / EMC Department Approved by Glyn He Supervisor / EMC Department Date: May 19, 2014 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 33 Report Version 1 Test Report No.: RF140430N037 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS.................................................................................................... 5 2 MEASUREMENT UNCERTAINTY................................................................................................. 5 3 GENERAL INFORMATION ............................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................. 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 8 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 8 4 TEST TYPES AND RESULTS........................................................................................................ 9 4.1 CONDUCTED EMISSION MEASUREMENT ............................................................................. 9 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT................................................... 9 4.1.2 TEST INSTRUMENTS ........................................................................................................ 9 4.1.3 TEST PROCEDURES....................................................................................................... 10 4.1.4 DEVIATION FROM TEST STANDARD............................................................................. 10 4.1.5 TEST SETUP .....................................................................................................................11 4.1.6 EUT OPERATING CONDITIONS ......................................................................................11 4.1.7 TEST RESULTS................................................................................................................ 12 4.2 RADIATED EMISSION MEASUREMENT ................................................................................ 14 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ........................................................ 14 4.2.2 TEST INSTRUMENTS........................................................................................................ 15 4.2.3 TEST PROCEDURES ........................................................................................................ 16 4.2.4 DEVIATION FROM TEST STANDARD............................................................................... 17 4.2.5 TEST SETUP...................................................................................................................... 17 4.2.6 EUT OPERATING CONDITIONS ....................................................................................... 17 4.2.7 TEST RESULTS ................................................................................................................. 18 4.3 20dB BANDWIDTH MEASUREMENT...................................................................................... 26 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT ..…
Text truncated - open the document above for the full version.
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Test Report No.: 140430N037 SET-UP FOR CONDUCTED EMISSION TEST Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Test Report No.: 140430N037 SET-UP FOR RADIATED EMISSION TEST Frequency Range< 30MHz~1GHz > Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Test Report No.: 140430N037 Frequency Range< Above 1GHz >
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | - |

CD MICRO SYSTEM
Equipment Class
DTS - Digital Transmission System
CD MICRO SYSTEM
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Bluetooth Speaker
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Wi-Fi Audio Receiver
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterWi-Fi Speaker System
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter