2ABM5-BTD622Docking System for iPhone/iPod/iPad

Docking system for iPod/iPhone/iPad BTD622 GB-1 Some Dos And Don't On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. *********************************** DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and intercon- nections between the pieces of equipment) are properly made and in accordance with the manufac- turer’s instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat. *********************************** DON’T remove any fixed cover as this may expose dangerous voltages. DON’T obstruct the ventilation openings of the equipment with items such as newspaper, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment. DON’T place hot object or naked flame sources such as lighted candles or night-lights on, or close to equipment. High temperatures can melt plastic and lead to fires. DON’T use makeshift stands and NEVER fix legs with wood screws-to ensure complete safety al- ways fit the manufacturer’s approved stand or legs with the fixings provided according to the instruc- tions. DON’T use equipment such as personal stereos or radios so that you are distracted from the require- ments of traffic safety. It is illegal to watch television whilst driving. DON’T listen to headphones at high volume, as such use can permanently damage your hearing. DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equip- ment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way-switch off, withdraw the mains plug and consult your dealer. ABOVE ALL, - NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock; - NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry! *********************************** GB-2 To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure. Important Notes * Keep instructions: the safety and operating instructions should be retained for future reference. *Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. On top of other stereo equipment that radiate too much heat. Places lacking ventilation or dusty places. Places subject to constant vibration. Humid or moist places, the use of apparatus in moderate climates. * Make sure not to obstruct the ventilation openings. * Before turning on the power for the first time, make sure the power cord is properly installed. * Mains plug is used as the disconnect device and it shall remain readily operable. * The product shall not be exposed to dirpping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. * To completely disconnect the power input, the mains plug of apparatus shall be disconnected from the main. Unplug the unit from the wall outlet before storms to prevent damage due to lightning and any power fluctuation. * When the standby LED and display are not illuminated; this inducates that the power switch is set to off or the set is disconnected from the mains. * Minimum distances 10cm around the apparatus for sufficient ventilations. * Attention should be drawn to the environmental aspects of battery disposal. * The mains plug should not be obstructed or should be easily accessed during intended use. * The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-clothes, curtains etc. * No naked flame sources such as lighted candles should be placed on the apparatus. * Battery shall not be exposed to excessive heat such as sunshine, fire or the like. For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personel. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN GB-3 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING. Note: - This unit will become warm when used for a long period of time. This is normal and does not indicate a problem with the unit. - If unusual conditions occur in the display or buttons, switch the unit off then turn on the unit again. - Under the influence of electrostatic phenomenon, the product may malfunction and require user to power reset. - The marking plate is located on the bottom enclosure of the unit. FCC This device complies with Part 15 of the FCC Rules. Operation is…

Text truncated - open the document above for the full version.

Rev 11/20/07 Zhong Shan City LI TAI Electronic Industrial Co., Ltd Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ABM5-BTD622. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram, 2ABM5-BTD622_Block Diagram.pdf, Schematics, 2ABM5-BTD622_Schematics.pdf, Operational Description 2ABM5-BTD622_Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Zhong Shan City LI TAI Electronic Industrial Co., Ltd Yuki Cai /Safety approbation engineer

Zhong Shan City LI TAI Electronic Industrial Co., Ltd Date: January 28, 2015 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2ABM5-BTD622 To Whom It May Concern: This letter is to ascertain that Zhong Shan City LI TAI Electronic Industrial Co., Ltd Docking System for iPhone/iPod/iPad, MODEL No.: BTD622, BTD602 has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, signature Yuki Cai / Safety approbation engineer E-mail: [email protected] Phone: +86-760-23808322 Fax: +86-760-23808800 Address: No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China528458

Zhong Shan City LI TAI Electronic Industrial Co., Ltd Family models declaration letter. 2015-1-23 We Zhong Shan City LI TAI Electronic Industrial Co., Ltd Of No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China528458 Product: Docking System for iPhone/iPod/iPad FCC ID: 2ABM5-BTD622 Model Name: BTD622, BTD602 These models are identical in circuitry and electrical, mechanical and physical construction; the only differences is model Number. BTD602 only with one iPhone/iPod/iPad dock; BTD622 with one iPhone/iPod dock and one iPhone/iPod/iPad dock; BTD602 base on BTD622,delete some component to delete the iPhone/iPod dock fuction; Detail diference show in the product; not influential with the products' feature of safety and EMC for trading purpose. Unless otherwise stated. Thanks Sincerely, Signature Yuki Cai / Safety approbation engineer E-mail: [email protected] Phone: +86-760-23808322 Fax: +86-760-23808800 Address: No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China528458

\\server\EMC\1.\2015\L\\ES150112102E\\fcc FORM\POA_Letter_140225.docx Zhong Shan City LI TAI Electronic Industrial Co., Ltd Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2015-1-23 SUBJECT: FCC Application for 2ABM5-BTD622 To Whom It May Concern: We, the undersigned, hereby authorize SHENZHEN EMTEK CO., LTD (MR. David Lee, Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by SHENZHEN EMTEK CO., LTD (MR. David Lee, Manager) on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, Zhong Shan City LI TAI Electronic Industrial Co., Ltd, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Zhong Shan City LI TAI Electronic Industrial Co., Ltd Yuki Cai /Safety approbation engineer

External photo(BTD602): External photo(BTD622):

PO. NO.: H1409-0060 70pcsneon-BTD602（AMAZON） BTD602 v0.3 4 The U.S.A dedicated 41014985 40x10mm 1x1PC This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. BTD602 BTD622 BTD602 BTD622 37-BTD612-03A100 BTD612 37-BTD612-02A101 BTD612 37-BTD612-01A101 BTD612 39-BTD602-01A101 39-BTD612-02A101 39-BTD612-03A101 39-BTD612-04B102 D41015020 41015165 39-PRC503-01B112

BTD622 0.2V PO. NO.: H1409-0058 (200pcs)neon_BTD622（ AMAZON） Top keys silver chrome,sandblasting SRC SRC key silver chrome,sandblasting Power key silver chrome,sandblasting Top keys silver chrome,sandblasting Top keys silver chrome,sandblasting Back view Spray mid grey silver,silk dark grey pantone:432C CAUTION Silver Remote(PRC500) MAIN SET LABEL key ring silver chrome Top,silver silk dark grey pantone:432C All rubber keys Spray dark grey(pantone 432U-E) silk light grey pantone427C rubber key_ Spray dark grey(pantone 432U-E) silk red pantone032C plastic bags Length ＜ 19cm PE 0 4 plastic bags Length ＞ 19cm WARNING Plastic bags can be dangerous. To avoid danger of suffocation, keep this bag away from babies and children. WARNUNG Plastikbeutel können gefährlich sein. Helten Sie deshalb diesen Beutel zur Vermeidung von Erstickungsgefahr von Babys und Kleinkindern fern. ATTENTION Sacs en plastique peuvent être dangéreux. Pour éviter le danger de suffocation garder ces sacs élolgnés des PE 0 4 1x1PC Main set lael White text on black background 49.8x29.8mm 1 1 D4101XXXX 7.5V 3.5A FM 87.5-108MHz S/N:408000001 to up Model:BTD622 label 2 FCC ID:2ABM5-BTD622 FCC ID：2ABM5-BTD622 D41015007 48.5x25.4mm for Amazon 1X1PC 4 4 3 3 The U.S.A dedicated 41014985 40x10mm 1x1PC This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N:412000001 Manufactured December 2014 7.5V 3.5A FM 87.5-108MHz Model:BTD622 FCC ID:2ABM5-BTD622 S/N:412000001 Manufactured December 2014 Remote senser Top view Bottom view Logo silk dark grey pantone:432C Aluminum, mid grey with horizontal brushed silk dark grey pantone 432C Spray mid grey silver Front view Spray mid grey silver Speaker grille, Metal,Spray mid grey silver LCD display,transparent silk back on bottom 30X4.6mm 30X4.6mm Logo silk dark grey pantone432C BTD622 ALBUM+/-

Label Location Proposed Label Location on EUT

Internal photo(BTD602): Internal photo (BTD622): Module Antenna

FCC ID: 2ABM5-BTD622 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz； Power and distance are rounded to the nearest mW and mm before calculation； The result is rounded to one decimal place for comparison； The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. We use 5mm as separation distance to calculated. Maximum measured transmitter power: Transmit Frequency (GHz) Mode Measured Power (dBm) Tune-up power (dBm) Max tune-up power(dBm) Result calculation 1-g SAR 2.402 GFSK 4.727 5.5±1 6.5 1.3846 3.00 2.441 GFSK 6.195 5.5±1 6.5 1.3958 3.00 2.480 GFSK 5.876 5.5±1 6.5 1.4069 3.00 2.402 π/4-DQPSK 4.713 5.5±1 6.5 1.3846 3.00 2.441 π/4-DQPSK 6.195 5.5±1 6.5 1.3958 3.00 2.480 π/4-DQPSK 5.884 5.5±1 6.5 1.4069 3.00 2.402 8DPSK 4.713 5.5±1 6.5 1.3846 3.00 2.441 8DPSK 6.203 5.5±1 6.5 1.3958 3.00 2.480 8DPSK 5.882 5.5±1 6.5 1.4069 3.00 Conclusion: For the max result 1.4069≤ 3.0 for 1-g SAR extremity SAR, No SAR is required. Sincerely, Signature Company Name: SHENZHEN EMTEK CO., LTD. Address: Bldg 69, Majialong Industry Zone, NanshanDistrict, Shenzhen, China. David Lee/ Manager

TRF No.:FCC 15.247/A Page 1 of 65 Report No.: ES150112102E Ver.1.0 Access to the World FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT For Docking System for iPhone/iPod/iPad MODEL No.: BTD622, BTD602 FCC ID: 2ABM5-BTD622 Trademark: N/A REPORT NO.: ES150112102E ISSUE DATE: January 23, 2015 Prepared for Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China528458 Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No.:FCC 15.247/A Page 2 of 65 Report No.: ES150112102E Ver.1.0 Access to the World Table of Contents 1 TEST RESULT CERTIFICATION .......................................................................................................................... 3 2 EUT TECHNICAL DESCRIPTION ........................................................................................................................ 4 3 SUMMARY OF TEST RESULT ............................................................................................................................. 5 4 TEST METHODOLOGY ........................................................................................................................................ 6 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................................... 6 4.2 MEASUREMENT EQUIPMENT USED ..................................................................................................... 6 4.3 DESCRIPTION OF TEST MODES ............................................................................................................. 6 5 FACILITIES AND ACCREDITATIONS ................................................................................................................. 8 5.1 FACILITIES ................................................................................................................................................. 8 5.2 LABORATORY ACCREDITATIONS AND LISTINGS .............................................................................. 8 6 TEST SYSTEM UNCERTAINTY ........................................................................................................................... 9 7 SETUP OF EQUIPMENT UNDER TEST ............................................................................................................. 10 7.1 RADIO FREQUENCY TEST SETUP 1 ..................................................................................................... 10 7.2 RADIO FREQUENCY TEST SETUP 2 ..................................................................................................... 10 7.3 CONDUCTED EMISSION TEST SETUP ................................................................................................. 12 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ................................................................. 13 7.5 SUPPORT EQUIPMENT ........................................................................................................................... 13 8 FREQUENCY HOPPING SYSTEM REQUIREMENTS ..................................................................................... 14 8.1 STA N D A R D APPLICABLE .............................................................................................................................. 14 8.2 EUT PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ........................................................................... 14 8.3 EQUAL HOPPING FREQUENCY USE .............................................................................................................. 15 8.4 FREQUENCY HOPPING SYSTEM .................................................................................................................... 15 9 TEST REQUIREMENTS ...................................................................................................................................... 16 9.1 20DB BANDWIDTH ................................................................................................................................. 16 9.2 CARRIER FREQUENCY SEPARATION .................................................................................................. 22 9.3 NUMBER OF HOPPING FREQUENCIES ............................................................................................... 28 9.4 AV E R A G E TIME OF OCCUPANCY (DWELL TIME) ............................................................................. 30 9.5 MAXIMUM PEAK CONDUCTED OUTPUT POWER ............................................................................ 33 9.6 CONDUCTED SUPRIOUS EMISSION .................................................................................................... 39 9.7 RADIATED SPURIOUS EMISSION ......................................................................................................... 46 9.8 CONDUCTED EMISSION TEST .............................................................................................................. 62 9.9 ANTENNA APPLICATION ....................................................................................................................... 65 TRF No.:FCC 15.247/A Page 3 of 65 Report No.: ES150112102E Ver.1.0 Access to the World 1 TEST RESULT CERTIFICATION Applicant: Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China528458 Manufacturer: Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China528458 Product Description: Docking System for iPhone/iPod/iPad Model Number: BTD622, BTD602 (Note: These models are identical in circuitry and electrical, mechanical and physical construction; the only differences is model Number. BTD602 only with one iPhone/iPod/iPad dock; BTD622 with one iPhone/iPod dock and one iPhone/iPod/iPad dock; BTD602 base on BTD622,delete some compo…

Text truncated - open the document above for the full version.

Conducted Measurement Photo Radiated Emission Test