2ABM5-BTS662Bluetooth Speaker System

Note: - The device will also be disconnected when the device is moved beyond the operational range. - If you want to reconnect the device to the unit, place it within the operational range. - The device will be connected the Bluetooth device pairing already, and also enter pairing mode, other Bluetooth device can be searching for connection or pairing. - When the unit disconnected the Bluetooth device, it will enter pairing mode automatically, other Bluetooth device can be searching for connection or pairing. Listen to music from Bluetooth device If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit. 1. Pair the device with the unit. 2. Start play music via device. Note: - If connected other devices and Bluetooth listen to music, the files within Bluetooth device playback advanced. Specifications Main adaptor Model No. : QX30W150200FG (for German) QX30W150200FB (for UK) QX30W150200FU (for USA) Vendor : STOS Input : AC 100-240V 50-60Hz 0.8A Output : DC 15V 2A General Power Consumption : ???W Output Power : 10W x 2 +25W RMS Dimensions : Φ175 ×198 mm Φ40 × 95 mm Note: Design and specifications are subject to change without prior notice. Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. No power - Ensure that the AC adapter is connected securely. - Ensure that there is power at the AC Mains. No sound - Adjust the volume. - Speaker connections is incorrect. No response from the unit - Disconnect and reconnect the AC adapter, then turn on the unit again. The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product. EN Safety Warnings - Read all the instructions carefully before using the unit and keep them for future reference. - Retain the manual. If you pass the unit onto a third party make sure to include this manual. - Check that the voltage marked on the rating label matches your mains voltage. - The marking information is located at the bottom of apparatus. - The product complies with the requirement of the 1999/5/EC directive. Damage - Please inspect the unit for damage after unpacking. - Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer. Location of Unit - The unit must be placed on a flat stable surface and should not be subjected to vibrations. - Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. - The mains socket must be located near the unit and should be easily accessible. Temperature - Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires. - Avoid exposure to direct sunlight and other sources of heat. Naked Flames - Never place any type of candle or naked flame on the top of or near the unit. Moisture - To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. - If you spill any liquid into the unit, it can cause serious damages. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. Ventilation - To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents. - A minimum distance of 5cm around the unit should be maintained to allow for sufficient ventilation. - Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. Safety - Always disconnect the unit from the mains supply before connecting/ disconnecting other devices or moving the unit. - Unplug the unit from the mains socket before a lightning storm. - In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains plug from the mains socket. Mains Adapter Cable - Make sure the unit or the unit stand is not resting on top of the mains adapter cable, as the weight of the unit may damage the cable and create a safety hazard. - Where the plug of the Direct Plug-in Adapter coupler is used as the disconnect device, the disconnect device shall remain readily operable. Mains Adapter - The mains adapter will continue to draw electricity from the mains supply when plugged in the mains socket. In the interests of safety and to avoid unnecessary energy consumption, never leave the adapter plugged in the mains socket while unattended for long periods of tim…

Text truncated - open the document above for the full version.

Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Induxtrial Park, Wuguishan Town, Zhongshan, Guangdong, China 1, Sep, 2014 To whom it may concern CONFIRMATION LETTER We certify that BTS662 and BTS662W are same, except Cabinet color.BTS662 is black,BTS662W is white. Signature & stamp

ZhongShanCityLITAIElectronicIndustrialCo.,Ltd AuthoritytoActasAgent Date:2014-8-21________ ToWhomItMayConcern: We,theundersigned,herebyauthorizeSGS-CSTCStandardsTechnicalServicesCo.,Ltd. (SGS)ShenzhenBranchandHellenWanginSGS-CSTCStandardsTechnicalServicesCo., Ltd.(SGS)ShenzhenBranchtoactonourbehalfinallmattersrelatingtoallprocesses requiredinFCCapprovalandanycommunicationneededwiththenationalauthority,shall havethesamelegalauthorityasactsonourownbehalf. Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludesFCCbenefits, pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862.Further,no party,asdefinedin47CFR1.2002(b),totheapplicationissubjecttodenialoffederal benefits,thatincludesFCCbenefits. Thankyou, AgencyAgreementExpirationDate:___12months_____ By: YukiCai/蔡燕婷 (Signature)(Printname) Title:Safetyapprobationengineer Onbehalfof: ZhongShanCityLITAIElectronicIndustrialCo.,Ltd (CompanyName) Telephone:+86-760-23808322

Request for Confidentiality Date: 2014-8-21 Subject: Confidentiality Request for:FCC ID:2ABM5-BTS662_ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality RequestedExhibit Short TermPermanentBlock Diagrams Short TermExternal Photos Short TermPermanent* 1 Internal Photos Short TermPermanentOperation Description/Theory of Operation Short TermPermanentTune-Up Procedure Short TermPermanentSchematics Short TermTest Setup Photos Short TermPermanent*User’s Manual *Note: _____FCC ID:2ABM5-BTS662____ _ Zhong Shan City LI TAI Electronic Industrial Co., Ltd has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _180_ _ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior tomarketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time thatIC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above willsimply be marked Confidential when submitted to IC. Sincerely, By:/Safety approbation engineer Yuki Cai (Signature/Title 2 )(Printname)

1 Photographs - EUT Constructional Details Test Model No.: BTS662

1 Photographs - EUT Constructional Details Test Model No.: BTS662

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140800420902 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1408004209RF Applicant: Zhong Shan City LI TAI Electronic Industrial Co., Ltd Manufacturer/Factory: Zhong Shan City LI TAI Electronic Industrial Co., Ltd Product Name: Bluetooth Speaker System Model No.(EUT): BTS662 Add Model No.: BTS662W Trade Mark: neon FCC ID: 2ABM5-BTS662 Standards: 47 CFR Part 1.1307(2013) 47 CFR Part 2.1093 (2013) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2014-08-12 Date of Test: 2014-08-18 to 2014-08-29 Date of Issue: 2014-09-10 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140800420902 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-09-10 Original Authorized for issue by: Tested By 2014-08-29 (Apple Sun) /Project Engineer Date Prepared By 2014-09-10 (Molinda Li) /Clerk Date Checked By 2014-09-11 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140800420902 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE .........…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140800420901 Page: 1 of 95 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No.: SZEM1408004209RF Applicant: Zhong Shan City LI TAI Electronic Industrial Co., Ltd Manufacturer/Factory: Zhong Shan City LI TAI Electronic Industrial Co., Ltd Product Name: Bluetooth Speaker System Model No.(EUT): BTS662 Add Model No.: BTS662W Trade Mark: neon FCC ID: 2ABM5-BTS662 Standards: 47 CFR Part 15, Subpart C (2013) Date of Receipt: 2014-08-12 Date of Test: 2014-08-18 to 2014-08-29 Date of Issue: 2014-09-10 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140800420901 Page: 2 of 95 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-09-10 Original Authorized for issue by: Tested By 2014-08-29 (Apple Sun) /Project Engineer Date Prepared By 2014-09-10 (Molinda Li) /Clerk Date Checked By 2014-09-11 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140800420901 Page: 3 of 95 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test Model No.: BTS662 1.1 Conducted Emission 1.2 Radiated Emission 1.3 Radiated Spurious Emission