2AC6AC60Mobile Data Terminal with GSM, WCDMA, LTE, CDMA, WiFi, Bluetooth and NFC

SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD. C60 User Manual 1 Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Chainway grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Chainway. Chainway reserves the right to make changes to any software or product to improve reliability, function, or design. Chainway does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Chainway intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Chainway products. 2 Contents Statement .......................................................................................... 1 Chapter 1 Brief Instruction ................................................................. 4 1.1 Brief Instruction ................................................................... 4 1.2 Precaution Before Using Battery ......................................... 5 Chapter 2 Installation Guide .............................................................. 7 2.1 Appearance ............................................................................. 7 2.2 Buttons .................................................................................... 8 2.3 Micro SD、SIM card Installation .............................................. 9 2.4 Battery Charging ...................................................................... 9 2.5 Device Power on/off ............................................................... 10 Chapter 3 Call Function ................................................................... 11 3.1 Phone .................................................................................... 11 3.2 Contacts ................................................................................ 12 3.3 Messaging ............................................................................. 13 Chapter 4 Barcode Reader.............................................................. 14 Chapter 5 RFID Reader(optional) .................................................... 15 5.1 NFC ....................................................................................... 15 Chapter 6 Other Functions .............................................................. 16 6.1 PING ...................................................................................... 16 6.2 Bluetooth ............................................................................... 17 6.3 GPS ....................................................................................... 18 6.4 Volume Settings ..................................................................... 19 6.5 Sensor ................................................................................... 20 6.6 Keyboard ............................................................................... 21 6.7 Network ................................................................................. 22 3 Chapter 7 Device Specifications ...................................................... 23 4 Chapter 1 Brief Instruction 1.1 Brief Instruction Chainway C60 is our newly-developed rugged handheld computer which exhibits extremely powerful performance, and that too while being immensely lightweight and portable. Built with Android 10 OS and Qualcomm high-performance processor, it features a removable large capacity battery and vigorous system configuration. It has rich functionality features for barcode scanning, RFID, NFC, front and rear cameras, etc., and can support 4G and WiFi. The ergonomic narrow- edge design makes it immensely comfortable to operate & employ for numerous projects. The device can be implemented in a wide spectrum of industries, including logistics, warehousing, retail, asset tracking, etc., assisting customers to improve operation and management level significantly. 5 1.2 Precaution Before Using Battery  Do not leave batteries unused for extended periods of time, either in the product or in storage. When the battery has been unused for 6 months, check the charge status and charge or dispose of the battery as appropriate.  The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully recharged again. Use a two to three year life expectancy for batteries that do not run through complete charge cycles.  Rechargeable Lithium-Ion batteries have a limited life and will gradually lose their capacity to hold a charge. This loss of capacity (aging) is irreversible. As the battery loses capacity, the length of time it will power the product (run time) decreases.  Lithium-Ion batteries continue to slowly dischar…

Text truncated - open the document above for the full version.

ShenzhenChainwayInformationTechnologyCo.,Ltd. Date:2020/12/28 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 Re:RequestofConfidentialityforFCCID:2AC6AC60 ToWhomitmayconcern: Pursuanttosections0.457and0.459ofCommission’sRules(CFR47), andSection552(b)(4)oftheFreedomofInformationAct,ShenzhenChainway InformationTechnologyCo.,Ltd.herebyrequestsconfidentialityandtreatmentof certaininformationaccompanyingthisapplication.Thematerialscontaintrade secretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShort-TermConfidentialityfor180daysafterthegrant asoutlinedinPublicNoticeDA04-1705.ThisprovisionwillgiveShenzhen ChainwayInformationTechnologyCo.,Ltd.temporaryconfidentialityof commerciallysensitiveinformationpriortoproductrelease. TherequestedPermanentandShort-TermConfidentialexhibitsarelistedas follows: PERMANENTANDSHORT-TERMCONFIDENTIALLIST ExhibitDescription PERMANENT 1BlockDiagram 2OperationalDescription 3Schematics 4BOM 5Tuneupprocedure SHORT-TERM 6ExternalPhotos 7InternalPhotos 8Test-SetupPhotos 9UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthis applicationandallaccompanyingdocumentations,whereapplicable,willnotbe madepublicbeforethedateoftheGrantforthisapplication. Signatory： Contactname:chenshurong Title:Manager ShenzhenChainwayInformationTechnologyCo.,Ltd. Tel:+8675523223301 Email:[email protected] Companyname:ShenzhenChainwayInformationTechnologyCo.,Ltd.

DeclarationLetter Hereby,we,ShenzhenChainwayInformationTechnologyCo.,Ltd.,certifythat theproductC60(FCCID:2AC6AC60)hastwoInternalmodel,internalmodels is4710and6603.Thedifferencebetweenthetwointernalmodelsisthatthe scanheadisdifferent. Exceptfortheabovedifferences,theircircuitdesign,layoutandinternalwiring arethesame. WehaveevaluatedthosechangesinEMCandSARreports.Thechangesdo notaffecttheresultsinreport. Pleasebenoticed. ShenzhenChainwayInformationTechnologyCo.,Ltd. Contactname:chenshurong Title:Manager 2020/12/23

ShenzhenChainwayInformationTechnologyCo.,Ltd. Date:2020/12/28 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: TheShenzhenChainwayInformationTechnologyCo.,Ltd.theundersigned, herebyauthorizesMrs.WendyZhanfromShenzhenMorlabCommunications TechnologyCo.,Ltd.,toactonthebehalfoftheShenzhenChainway InformationTechnologyCo.,Ltd.solelyinmattersrelatingtotheapplicationforan FCCequipmentauthorizationforFCCID:2AC6AC60includingthesigningof documentsinconnectionwiththisApplication.Necessaryactscarriedout ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.onourbehalfofthe ShenzhenChainwayInformationTechnologyCo.,Ltd.inconnectionwiththe ApplicationshallhavethesameeffectasactsoftheShenzhenChainway InformationTechnologyCo.,Ltd.alsoherebycertifythatnopartytothis applicationissubjecttoadenialofbenefits,includingFCCbenefits,pursuantto Section5301oftheAnti-DrugAbuseActof1988,21U.S.C.862. Thankyouforyourattentiontothismatter. YoursSincerely, Signatory: Contactname:chenshurong Title:Manager Tel:+8675523223301 Email:[email protected] Companyname:ShenzhenChainwayInformationTechnologyCo.,Ltd.

ShenzhenChainwayInformationTechnologyCo.,Ltd. Supplier’sDeclarationOfConformity fortheFCCSDoCProcedure ThefollowingEquipmentadaptFCCSDoCProcedureaccordingtoFCCpart2.906: ProductName:MobileDataTerminal BrandNam:CHAINWAY ModelNumber:C60 ReportNumber:SZ20100035E01 FCCID:2AC6AC60 It’sherewithconfirmedtocomplywiththerequirementsofFCCPart15Rules. Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation. Itisunderstoodthateachunitmarketedisidenticaltothedeviceastested,andanychangestothe devicethatcouldadverselyaffecttheemissioncharacteristicswillrequireretest. Thefollowingimporter/responsiblepartyinUnitedStates: NotAvailableatCertificationStage CompanyName:NA CompanyAddress:NA Telephone:NA Fax:NA Personisresponsibleformarkingthisdeclaration: chenshurongManager __________________________________________________________________________ Name(Fullname)Position/Title 2020.12.28 __________________________________________________________________________ LegalSignatureDate

ShenzhenChainwayInformationTechnologyCo.,Ltd. UNIIDeclarationLetter WehavedeclaredbelowfeaturedforFCCequipmentauthorization,deviceFCCID:2AC6AC60 (1)DFSDevice--Master,ClientwithRadardetectioncapability, Clientwithoutradardetectioncapability,N/A (2)Active/PassiveScanning,adhocmodeaccesspointcapability FrequencyBand (MHz) ActiveScanning (thedevicecan transmitaprobe (beacon)) passivescanning (wherethedevice is canlistenonly withno probes) AdHocMode capability Accesspoint capability 2412–2462MHzYes,NoYes,NoYes,NoYes,No 2422–2452MHzYes,NoYes,NoYes,NoYes,No 5745–5825MHzYes,NoYes,NoYes,NoYes,No 5755–5795MHzYes,NoYes,NoYes,NoYes,No 5180–5240MHzYes,NoYes,NoYes,NoYes,No 5190–5230MHzYes,NoYes,NoYes,NoYes,No 5260–5320MHzYes,NoYes,NoYes,NoYes,No 5270–5310MHzYes,NoYes,NoYes,NoYes,No 5500–5700MHzYes,NoYes,NoYes,NoYes,No 5510–5670MHzYes,NoYes,NoYes,NoYes,No (3)Countrycodeselectionability-Yes,No Ifno,plsexplainhowwasimplemented:CountryisselectedasUSbydefaultandusercannot changethecountrycode. (4)Meet15.202requirement-Yes,No, plscheckbelow: Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilityto transmitwithoutreceivinganenablingsignal.Inthismodeitisabletoselectachannelandinitiatea networkbysendingenablingsignalstootherdevices Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthedevice areundercontrolofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork. N/A (5)Forclientdevicesthathavesoftwareconfigurationcontroltooperateindifferentmodes(active scanninginsomeandpassivescanninginothers)indifferentbands(deviceswithmultipleequipment classesorthosethatoperateonnon-DFSfrequencies)ormodulardeviceswhichconfigurethemodes ofoperationsthroughsoftware,theapplicationmustprovidesoftwareandoperationsdescriptionon howthesoftwareand/orhardwareisimplementedtoensurethatproperoperationsmodescannot bemodifiedbyenduseroraninstaller. Apply,NoApply, (Ifapply,plshelptoprovideexplanationonhowitwasimplement(Byhardwareorsoftware,andhowsoftwarewascontrolled) Thedeviceconfigurationcannotbemodifiedbyuserasprogramisnotexposedtouserbyanymeans.Hardwaredoesnot allowUSBconnectionforuserwhichismusttochangetheconfiguration. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Yourssincerely, Signatory Contactname:chenshurong Title:Manager

FCC ID:2AC6AC60, MODEL NAME:C60 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

FCC ID:2AC6AC60, MODEL NAME:C60 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

1. Label 2. Label location In the bottom of battery

FCC ID:2AC6AC60, MODEL NAME:C60 Internal Photos 1. EUT uncover view 2. Antenna view NFC Antenna Bluetooth/Wi-Fi/GPS Antenna Diversity Antenna MAIN Antenna

FCC ID:2AC6AC60, MODEL NAME:C60 Internal Photos 1. EUT uncover view 2. Antenna view NFC Antenna Bluetooth/Wi-Fi/GPS Antenna Diversity Antenna MAIN Antenna

REPORT No.：SZ20100035S01 TEST REPORT APPLICANT : Shenzhen Chainway Information Technology Co., Ltd. PRODUCT NAME : Mobile Data Terminal MODEL NAME : C60 BRAND NAME : CHAINWAY FCC ID : 2AC6AC60 STANDARD(S) : 47 CFR Part 2(2.1093) IEEE 1528-2013 RECEIPT DATE : 2020-10-14 TEST DATE : 2020-10-24 to 2020-12-01 ISSUE DATE : 2020-12-29 Edited by : Gan Yueming ( Rapporteur) Approved by: Peng Huarui (Supervisor) NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 103 REPORT No.：SZ20100035S01 DIRECTORY 1. SAR Results Summary ······································································································ 5 2. Technical Information ········································································································ 6 2.1. Applicant and Manufacturer Information ····································································· 6 2.2. Equipment under Test (EUT) Description ···································································· 6 2.3. Environment of Test Site/Conditions ············································································ 8 3. Specific Absorption Rate (SAR) ······················································································· 9 3.1. Introduction ······················································································································ 9 3.2. SAR Definition ·················································································································· 9 4. RF Exposure Limits·········································································································· 10 4.1. Uncontrolled Environment ··························································································· 10 4.2. Controlled Environment ······························································································· 10 5. Applied Reference Documents ······················································································· 11 6. SAR Measurement System ····························································································· 12 6.1. E- Field Probe ·················································································································· 13 6.2. Data Acquisition Electronics (DAE) ············································································ 14 6.3. Robot ······························································································································· 14 6.4. Measurement Server ····································································································· 15 6.5. Light Beam Unit ············································································································· 15 6.6. Phantom ·························································································································· 15 6.7. Device Holder ················································································································· 16 6.8. Data Storage and Evaluation ······················································································· 17 6.9. Test Equipment List ······································································································ 19 7. Tissue Simulating Liquids ······························································································ 21 8. SAR System Verification ································································································· 23 9. EUT Testing Position ······································································································· 27 10. Measurement Procedures ······························································································· 31 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 103 REPORT No.：SZ20100035S01 10.1. Spatial Peak SAR Evaluation ······················································································· 31 10.2. Power Reference Measurement··················································································· 32 10.3. Area Scan Procedures ·································································································· 32 10.4. Zoom Scan Procedures ································································································ 32 10.5. SAR Averaged Methods ································································································ 33 10.6. Power Drift Monitoring ·································································································· 33 11. SAR Test Procedure ········································································································· 34 11.1. General Scan Requirements ························································································ 34 11.2. Test Procedure ··············································································································· 35 11.3. Description of Interpolation/Extrapolation Scheme ················································· 35 11.4. Wi…

Text truncated - open the document above for the full version.

RE PORT No.：SZ20100035S01 Annex C Plots of System Performance Check MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.12.01 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.929 S/m; ε r = 42.139; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3975; ConvF(9.9, 9.9, 9.9); Calibrated: 2020.05.20; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMC AD X Version 14.6.10 (7331) CW 750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.22 W/kg CW 750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 49.49 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 3.00 W/kg SAR(1 g) = 2.07 W/kg; SAR(10 g) = 1.39 W/kg Maximum value of SAR (measured) = 2.22 W/kg 0 dB = 2.22 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.25 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 1.002 S/m; ε r = 42.706; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.3, 9.3, 9.3); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn 480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW900/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.99 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.31 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 4.16 W/kg SAR(1 g) = 2.74 W/kg; SAR(10 g) = 1.76 W/kg Maximum value of SAR (measured) = 2.96 W/kg 0 dB = 2.96 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.26 System Check_1750MHz_Head Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1750 MHz; σ = 1.388 S/m; ε r = 41.145; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.99, 7.99, 7.99); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW1750/Area Scan (81x81x1): Inter polated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 10.6 W/kg CW1750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 88.08 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 17.0 W/kg SAR(1 g) = 9.39 W/kg; SAR(10 g) = 4.94 W/kg Maximum value of SAR (measured) = 10.6 W/kg 0 dB = 10.6 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.26 System Check_1900MHz_Head Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1900 MHz; σ = 1.399 S/m; ε r = 39.745; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.74, 7.74, 7.74); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW1900/Area Scan (81x81x1): Inter polated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 11.3 W/kg CW1900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 92.63 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 18.4 W/kg SAR(1 g) = 9.97 W/kg; SAR(10 g) = 5.18 W/kg Maximum value of SAR (measured) = 11.2 W/kg 0 dB = 11.2 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.27 System Check_2300MHz_Head Communication System: UID 0, CW (0); Frequency: 2300 MHz;Duty Cycle: 1:1 Medium: HSL_230 0 Medium parameters used: f = 2300 MHz; σ = 1.64 S/m; ε r = 39.251; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.56, 7.56, 7.56); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW2300/Area Scan (101x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 15.2 W/kg CW2300/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 96.09 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 26.6 W/kg SAR(1 g) = 12.9 W/kg; SAR(10 g) = 6.17 W/kg Maximum value of SAR (measured) = 14.5 W/kg 0 dB = 14.5 W/kg Date: 2020.11.02 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. System Check_2450MHz_Head Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.817 S/m; ε r = 38.801; ρ = 1000 kg/m 3 Ambient Temperature：23.1 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; C…

Text truncated - open the document above for the full version.

REPORT No.：SZ20100035S01 Annex D Plots of Maximum SAR Test Results MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.25 GSM850_GPRS(4 TX slots)_Left Cheek_Ch128 Communication System: UID 0, GSM850(class 12) (0); Frequency: 824.2 MHz;Duty Cycle: 1:2.08 Medium: HSL_835 Medium parameters used: f = 824.2 MHz; σ = 0.924 S/m; ε r = 42.769; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.3, 9.3, 9.3); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn 480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch128/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.871 W/kg Ch128/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.341 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.03 W/kg SAR(1 g) = 0.811 W/kg; SAR(10 g) = 0.606 W/kg Maximum value of SAR (measured) = 0.852 W/kg 0 dB = 0.852 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.24 GSM1900_GPRS(4 TX slots)_Left Cheek _Ch810 Communication System: UID 0, PCS1900(class 12) (0); Frequency: 1909.8 MHz;Duty Cycle: 1:2.08 Medium: HSL_1900 Medium parameters used: f = 1910 MHz; σ = 1.322 S/m; ε r = 39.646; ρ = 1000 k g/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.74, 7.74, 7.74); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch810/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.455 W/kg Ch810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.508 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.642 W/kg SAR(1 g) = 0.401 W/kg; SAR(10 g) = 0.239 W/kg Maximum value of SAR (measured) = 0.443 W/kg 0 dB = 0.443 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.24 WCDMA Band II_RMC 12.2Kbps_Left Cheek_Ch9538 Communication System: UID 0, UMTS-FDD (0); Frequency: 1907.6 MHz;Duty Cycle: 1:1 Medium: HSL_19 00 Medium parameters used: f = 1908 MHz; σ = 1.32 S/m; ε r = 39.631; ρ = 1000 kg /m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.74, 7.74, 7.74); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch9538/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.141 W/kg Ch9538/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.029 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.193 W/kg SAR(1 g) = 0.122 W/kg; SAR(10 g) = 0.073 W/kg Maximum value of SAR (measured) = 0.135 W/kg 0 dB = 0.135 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2020.10.24 WCDMA Band IV_RMC 12.2Kbps_Left Cheek_Ch1413 Communication System: UID 0, UMTS-FDD (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1750 Medium parameters used: f = 1733 MHz; σ = 1.412 S/m; ε r = 39.814; ρ = 1000 kg /m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.99, 7.99, 7.99); Calibrated: 2020.01.03; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn 480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch1413/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.242 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.472 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.330 W/k…

Text truncated - open the document above for the full version.