2AC6ACM2000-1UHF RFID Module

SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD CM2000/CM500 Module User Manual 1 Statement 2013 by ShenZhenChainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Chainway grants to the user a non-transferable and non- exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Chainway. Chainway reserves the right to make changes to any software or product to improve reliability, function, or design. Chainway does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Chainway intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Chainway products. 2 Statement .......................................................................................... 1 Chapter 1 Product Intro ..................................................................... 3 1.1 Intro ..................................................................................... 3 1.2 Brief ..................................................................................... 4 1.3 Device List ........................................................................... 5 1.4 Device installation ............................................................... 6 Chapter 2 Module Interface Definition ............................................... 7 2.1 CM2000-1/CM500-1 ................................................................ 7 2.2 CM2000-4/CM2000-8/CM2000-16 ........................................... 8 2.3 Parameter Setup ...................................................................... 9 Chapter 3 Read and Write EPC ...................................................... 16 3.1 Read EPC .............................................................................. 16 3.2 Read & Write Tags ................................................................ 17 3.3 Lock UHF Tag ........................................................................ 21 3.4 UDP-ReceiveEPC .................................................................. 22 3.5 Others .................................................................................... 23 3 Chapter 1 Product Intro 1.1 Intro Chainway CM2000-1 is a single channel UHF RFID reader module with high performance. It can be integrated in mobile UHF RFID readers, fixed UHF RFID readers, UHF card readers, integrated RFID readers and etc. With high integration level, this reliable module is small in size, low in power consumption. It is also resistant to electromagnetic interference and good at heat dispersion. All make it to absolutely satisfy needs of all environments. The module appeals to challenging industries like warehousing, logistics, apparel, production lines and such. 4 1.2 Brief CM2000 module can be adopted with multiple types of antennas with output powers as 5dBi, 9dBi, 12dBi. The port is SMA and development board, Windows SDK and demos are provided. 5 1.3 Device List 1. CM2000 module, development board, FPC, 12V/5A power adaptor. 2. UHF antennas: 6dBi, 9dBi, 12dBi etc. 3. Feeder line that has adopted with SMA male port, the port on other side needs to be equipped with antenna. 4. RJ45 Ethernet cable. 5. Serial port cable. 6. Demo software, it includes 4 necessary files and UDFAPP.exe is execute program as pic. 1. Pic.1 6 1.4 Device installation CM2000 can be connected as Pic.2. PC can connect with development board by cable. Single CM2000 module can connect with different amounts of antennas according to different models. Pic.2 7 Chapter 2 Module Interface Definition 2.1 CM2000-1/CM500-1 8 2.2 CM2000-4/CM2000-8/CM2000-16 9 2.3 Parameter Setup Double click UHFAPP.exe to enter software, and connect with device through serial port line. Select Mode to “SerialPort”, select COM to according serial port on PC. Click “Open” to connect with device, initiation page is as follows: If RJ45 has been used as connection, communication Mode needs to be selected as “network” and input IP address and port number (default IP address is 192.168.99.202, Port is 8888.) Then click “Open” to connect PC and device. After PC and device have been connected, the status page is as follows: 10 11 After device has connected with PC, the parameters on interface will be empty. Click “Get” on each option to collect device parameters. Click “Set” on the page, user can adjust necessary parameters, some parameters are default values. Output power can be set in range of 5 dBm to 30 dBm as following picture, after select value, click “Set” button. If “Save” has been selected, current parameters will be saved after power off device. Set regions: 12 Set RFLink: Set continuous wave: There are two work modes can be selected, “command mode” and “auto mode”. Under “command mode”, user could collect tag data in “Read EPC” page, click “Start” to send command to devic…

Text truncated - open the document above for the full version.

SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-01-15 Subject; Modular Transmitter Application Company name: UHF RFID Module FCC ID: 2AC6ACM2000-1 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID 2AVFM-VIM3 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. YES The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. All modulation and data inputs are buffered by circuitry on the transmitter chip CC2500, as is shown in the schematic. The module must contain power supply regulation on the module. Power supply regulation is provided by circuitry on the transmitter chip CC2500, as is shown in the schematic. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The antenna is permanently attached. The module must demonstrate compliance in a stand-alone configuration. Testing was performed in a stand-alone configuration, as shown in the test setup photos. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The module is labeled with its own FCC ID number. Please refer to Label. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. The module complies with this requirement. Please refer to user manual. The module must comply with RF exposure requirements The module complies with this requirement. Please refer to MPE report. SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. FCC Modular Approval Request Rev 3.0 Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules 2.3 Summarize the specific operational use conditions 2.4 Limited module procedures 2.5 Trace antenna designs 2.6 RF exposure considerations 2.7 Antennas 2.8 Label and compliance information 2.9 Information on test modes and additional testing requirements 2.10 Additional testing, Part 15 Subpart B disclaimer Name: ShuRong Chen Date: 2020-01-15 Title: Manager Signature of applicant:

C5266091_X8_Ed.1 1/1 Letter of Authorization SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD. Company: SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD. Address: 9/F, Building 2, Daqian Industrial Park, Longchang Rd., District 67, Bao’an, Shenzhen, China Product Name: UHF RFID Module Model Number: CM2000-1 FCC Identifier: 2AC6ACM2000-1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Date: January 15, 2020 Title: Manager Signature of applicant: chen shurong

C5266091_X10_Ed.1 1/1 SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7075 Flying Cloud Dr. Eden Prairie, MN 55344 USA Date: January 15, 2020 Subject: Request for Confidentiality FCC ID: 2AC6ACM2000-1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Title: Manager chen shurong

C5266091_X13_Ed.1 SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTD. FCC Software Configuration Control Declaration Date: January 15, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OETDept. Product Name: UHF RFID Module Model Number: CM2000-1 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has beencertified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name: ShuRong Chen 1/1

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 1. EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 ANT SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 Fig. 3

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L2.0cm*W1.5cm Label Location UHF RFID Module Model No.: CM2000-1 FCC ID: 2AC6ACM2000-1

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. 2AC6ACM2000-1 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. 2AC6ACM2000-1 Fig.3 Fig.4

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 Report No.: LCS191111080AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 37 FCC TEST REPORT FOR SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. UHF RFID Module Test Model: CM2000-1 Additional M/N: / Prepared for : SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. Address : 9/F, Building 2, Daqian Industrial Park, Longchang Rd., District 67, Bao’an, Shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 15, 2019 Number of tested samples : 1 Sample number : Prototype Date of Test : November 15, 2019 ~ December 30, 2019 Date of Report : December 31, 2019 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 Report No.: LCS191111080AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 37 FCC TEST REPORT FCC CFR 47 PART 15 C (15.249) Report Reference No. ................. : LCS191111080AEA Date of Issue................................... : December 31, 2019 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. Address ........................................... : 9/F, Building 2, Daqian Industrial Park, Longchang Rd., District 67, Bao’an, Shenzhen, China Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.249) / ANSI C63.10: 2013 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : UHF RFID Module Trade Mark ..................................... : Chainway Test Model ...................................... : CM2000-1 Ratings ............................................ : For: Adapter, INPUT: 100-240 50/60Hz 0.8A OUTPUT: DC 12V/2000mA Result ........................................... : Positive Compiled by: Supervised by: Approved by: Ray Yang/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 Report No.: LCS191111080AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 37 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS191111080AEA December 31, 2019 Date of issue Test Model.............................. : CM2000-1 EUT......................................... : UHF RFID Module Applicant............................... : SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. Address.................................. : 9/F, Building 2, Daqian Industrial Park, Longchang Rd., District 67, Bao’an, Shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. Address................................... : 9/F, Building 2, Daqian Industrial Park, Longchang Rd., District 67, Bao’an, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD. Address................................... : 9/F, Building 2, Daqian Industrial Park, Longchang Rd., District 67, Bao’an, Shenzhen, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 Report No.: LCS191111080AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 37 Revision History Revision Issue Date Revisions Revised By 000 December 31, 2019 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 Report No.: LCS191111080AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 37 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................. 6 1.1 Description of Device (EUT) ....................................................................................................... 6 1.2. Support Equipment List .........................................................................................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Below 1GHz Above 1GHz SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AC6ACM2000-1 _______________________________________________________________________________________________ 1.2. Photo of Power Line Conducted Emissions Measurement