
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
ͷͳͲͲͲ ǦͲͲȀͷͳͲͲͲǦͲͳ ǡ ATTENTION: Ǥ1. GENERAL INFORMATION ǡ ʹͳʹ͵ Ǥ ǡ ǡ Ǥ ǡ Ǧ Ǥ ǡ Ͷͳι ȋͷιȌ Ǥ ͲǦ Ǥ ǡ ǯ Ǥ ǯ Ǥ ͳͲǤͳͲ Ǥ WARNING: Ǥ Ƭ ȋ Ȍ Ǥ 2. DETECTOR OVERVIEW ʹǤͳ Figure 1 - Detector Front ʹǤʹ Figure 2 - Detector Back CO Test Button Indicator LEDs Fire Test Button CO Sensor Gas Entry Port Anti-Tamper Lock Release Sounder Tamper Switch Mechanism Anti-Tamper Lock Mechanism Battery Compartment ʹǤ͵ Figure 3 - Mounting Base 3. CONTENTS OF BOX x ǡ x ȋͲ ͅͳʹȌ x x x ʹͳʹ͵ ʹͳʹ͵ 4. OPERATION ǡ ͵ǤͶͳǦ ͵ ͵ǤͶʹǦͶ Ǥ ǡ ǯ Ǥ ǡ Ȁ ȋ ȌǤ Ǧ Ǥ ǡ ǡ ȋ ƬȌǤͶǤͳ Ƭ Status Description LEDs Sounder ͵ Ǧ͵ ǦǦǦ ȋ Ȍ ͵ Ǧ͵ ǦǦǦ Ͷ ǦͶ Ǧ Ǧ Ǧ Ǧ ȋ ͷȌ ȀǦ ͳ ͳ ͳʹ Ͷͳι ȋͷιȌ ͵ Ͷ Anti-Tamper Locking Tab Tamper Switch Mechanism Screw Mounting Holes ͳ Ͷ Ͷ ͅ ʹ ͅ Ͷ ͅ ͳͲ ͷ ͳʹ Ͷ ͅ Ȁ ͳ ͅ Ͷ ͅ ͳ ͳʹ Ͷ ͅ ȋ ͳʹȌ ͵ Ǧ͵ ǦǦǦ Ͷ ǦͶ Ǧ Ǧ Ǧ Ǧ ͳ ͳ ͳʹ ͳ ͳ ͳ ͳ ͳʹ Table 1 - Detector Status LED & Sounder Operating Modes ͶǤʹ Ͷ ͅ ͅ Ǥ ͳͲǤͳ ǤͶǤ͵ ͳͲ Ͷ ͅ ͷͳʹ Ǥ…
Text truncated - open the document above for the full version.
Microprocessor Smoke Sensor CO Sensor Batteries Piezo Sounder RGB Indicator LED Temperature Sensor Test Buttons Tamper Switch Wireless RF Interface
November I, 2020 Attention: Application Examiner RE: Request for Confidentiality Applicant: Apollo America, Inc. FCC ID: 2ACE9 - 5 1 000 6 0 X To Whom It May Concern: Permanent Confidentiality Apollo America 25 Corporate Drive Auburn Hills, Michigan 48326 USA Tel: +1 (248) 332-3900 Email: [email protected] Fax: +1 (248) 332-8807 www.apollo-fire.com Request is hereby submitted by Apollo America, Inc. to withhold permanently from public review certain portions of the application f o r equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Parts list Rationale f o r request for confidentiality: Apollo America, Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, H��� Business Unit Vice President, Residential Apollo America, Inc. A HALMA COMPANY
November 1, 2020 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Apollo America 25 Corporate Drive Tel: +1 (248) 332-3900 Email: [email protected] Auburn Hills, Michigan 48326 USA Fax: +1 (248) 332-8807 www.apollo-fire.com Subject: Limited Agency Agreement Apollo America, Inc FCC ID: 2ACE9-5100060 X To Whom It May Concern: We, Apollo America, Inc, hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2ACE9 -5 1000 6 0 X under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is November 1, 2020. The Limited Agency Agreement expires on December 31, 2021, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a d enial of federal benefits pursuant t o Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a d enial of federal benefits pursuant t o that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Haley Orr Business Unit Vice President, Residential A HALMA COMPANY
Front Back
A SHEET 1 OF 2 UNLESS OTHERWISE SPECIFIED: SCALE: 1:1 DWG. NO. A TITLE: NAMEDATE COMMENTS: MFG APPR. ENG APPR. CHECKED DRAWN PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF APOLLO AMERICA, INC.. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF APOLLO AMERICA, INC. IS PROHIBITED. 4 3 2 1 SIZE REV DRAWING IS FOR REFERENCE ONLY...CAD IS MASTER 51000-600 Callisto Combo Device Markings APD0811_600 Notes: 1. Markings to be lasered or Pad Print and LBL0001 2. Use ribbon RIB0001 3. Barcode format to be QR Code 4. Barcode data: m=model;s=serial no;f=SMK TXID;c=CO TXID serial number: 10 characters Pad left with ‘0’ to maintain constant length No spaces between characters 5. Markings in RED subject to change 6. FCC ID & IC identifiers both end in the letter X, This does not change to 0 or 1. MODEL: 51000-600 HELPS REDUCE COOKING NUISANCE ALARMS CONFORMS TO ANSI/UL STD 268 CERTIFIED TO CAN/ULC S529 CONFORMS TO ANSI/UL STD 2075 CERTIFIED TO CAN/ULC S588 WIRELESS SMOKE, HEAT AND CARBON MONOXIDE DETECTOR DÉTECTEUR SANS FIL DE FUMÉE, CHALEUR ET MONOXYDE DE CARBONE SN: 0123456789012 SMK TXID: YYY-ZZZZ CO TXID: YYY-ZZZZ MADE IN USA FABRIQUÉ AUX USA USE ONLY/UTILISEZ UNIQUEMENT DES BATTERIES PANASONIC CR123A (x2) OR/OU ENERGIZER EL123AP (x2) WARNING CO SENSITIVITY/ SENSIBILITÉ CO 400PPM 150PPM 70PPM RESPONSE TIME/ DÉLAI DE RÉACTION 4-15 MINUTES 10-50 MINUTES 60-240 MINUTES 3178931 MANUFACTURED/FABRIQUÉ: YYYY/MMM/DD FCC ID: 2ACE9-5100060X IC: 12011A-5100060X REFER TO INSTALL GUIDE/SE REPORTER AU GUIDE D’INSTALLATION: APD0812 R1.6B RETURN FOR SERVICING TO / RENVOYER POUR SERVICE À: APOLLO, 25 CORPORATE DR, AUBURN HILLS, MI 48326, USA N’UTILISEZ QUE LES BATTERIES SPÉCIFIÉES. L’UTILISATION DE TOUT AUTRE TYPE POURRAIT NUIRE AU FONCTIONNEMENT DE L'APPAREIL AVERTISSEMENT USE ONLY BATTERIES SPECIFIED IN MARKING. USE OF A DIFFERENT BATTERY MAY HAVE A DETRIMENTAL EFFECT ON PRODUCT OPERATION APD0811 A201130 REPLACE 10 YRS FROM DATE OF MANUFACTURE/REMPLACER 10 ANS A LA DATE DE FABRICATION FOR HOUSEHOLD USE ONLY/ POUR UN USAGE DOMESTIQUE UNIQUEMENT DO NOT INSTALL IN AMBIENT OVER 100°F (37.8°C)/N'INSTALLEZ PAS DANS UNE TEMPERATURE AMBIANTE AU-DESSUS DE 100°F (37.8°C) SUPPLEMENTARY HEAT RATING: 135°F (57.2°C)/ CHALEUR MAXIMALE: 135°F (57.2°C) MANUFACTURED BY/FABRIQUÉE PAR: APOLLO, 25 CORPORATE DR, AUBURN HILLS, MI 48326, USA FREQUENCY/FRÉQUENCE: 345MHz 3 RED 4 RED 1 GRN, 1 BLU, 12 SEC 3 YEL, 4 SEC 1 YEL, 4 SEC 2 YEL, 8 SEC 5 YEL, 12 SEC 1 YEL, 8 SEC 1 YEL, 12 SEC 1 YEL, 1 GRN, 12 SEC 1 GRN, 12 SEC FIRE ALARM CO ALARM CO TEST MODE FREEZE FAULT CO FAULT END OF LIFE DIRTY LOW BATTERY TAMPER NORMAL INDICATOR LEDSTATUS 3 ROUGE 4 ROUGE 1 VERT, 1 BLEU, 12 SEC 3 JAUNE, 4 SEC 1 JAUNE, 4 SEC 2 JAUNE, 8 SEC 5 JAUNE, 12 SEC 1 JAUNE, 8 SEC 1 JAUNE, 12 SEC 1 JAUNE, 1 VERT, 12 SEC 1 VERT, 12 SEC ALARME INCENDIE ALARME CO TEST DU CO GELER PANNE PANNE CO FIN DE VIE SALE BATTERIE FAIBLE ALTÉRER NORMAL INDICATEUR DELÉTAT SMOKE SENSITIVITY/ SENSIBILITÉ À LA FUMÉE 2.00 - 3.34 % PER FOOT/PIED Notes: 1. Markings to be lasered or Pad Print and LBL0005 2. Use ribbon RIB0003 small core 3. Date format YYYY/MMM eg. 2029/SEP 4. Markings in RED subject to change A SHEET 2 OF 2 UNLESS OTHERWISE SPECIFIED: SCALE: 1:1 DWG. NO. A TITLE: NAMEDATE COMMENTS: MFG APPR. ENG APPR. CHECKED DRAWN PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF APOLLO AMERICA, INC.. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF APOLLO AMERICA, INC. IS PROHIBITED. 3 2 1 SIZE REV DRAWING IS FOR REFERENCE ONLY...CAD IS MASTER 51000-600 Callisto Combo Device Markings APD0811_600 4 C A R B O N M O N O X I D E A L A R M - 4 B E E P S F I R E A L A R M - 3 B E E P S F A U L T - 1 B E E P F I R E / F E U C O A L A R M E C O - 4 B I P S A L A R M E I N C E N D I E - 3 B I P S P A N N E - 1 B I P T E S T / S I L E N C I E U X T E S T / H U S H Y E L L O W - F A U L T / J A U N E - P A N N E G R E E N - O K / V E R T - O K R E D - A L A R M / R O U G E - A L A R M E N E P A S P E I N D R E D O N O T P A I N T REPLACE BY: YYYY/MMM
A SHEET 1 OF 2 UNLESS OTHERWISE SPECIFIED: SCALE: 1:1 DWG. NO. A TITLE: NAMEDATE COMMENTS: MFG APPR. ENG APPR. CHECKED DRAWN PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF APOLLO AMERICA, INC.. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF APOLLO AMERICA, INC. IS PROHIBITED. 4 3 2 1 SIZE REV DRAWING IS FOR REFERENCE ONLY...CAD IS MASTER 51000-601 Callisto Combo Device Markings APD0811_601 Notes: 1. Markings to be lasered or Pad Print and LBL0001 2. Use ribbon RIB0001 3. Barcode format to be QR Code 4. Barcode data: m=model;s=serial no;f=SMK TXID;c=CO TXID serial number: 10 characters Pad left with ‘0’ to maintain constant length No spaces between characters 5. Markings in RED subject to change 6. FCC ID & IC identifiers both end in the letter X, This does not change to 0 or 1. MODEL: 51000-601 HELPS REDUCE COOKING NUISANCE ALARMS CONFORMS TO ANSI/UL STD 268 CERTIFIED TO CAN/ULC S529 CONFORMS TO ANSI/UL STD 2075 CERTIFIED TO CAN/ULC S588 WIRELESS SMOKE, HEAT AND CARBON MONOXIDE DETECTOR DÉTECTEUR SANS FIL DE FUMÉE, CHALEUR ET MONOXYDE DE CARBONE SN: 0123456789012 SMK TXID: YYY-ZZZZ CO TXID: YYY-ZZZZ MADE IN USA FABRIQUÉ AUX USA USE ONLY/UTILISEZ UNIQUEMENT DES BATTERIES PANASONIC CR123A (x2) OR/OU ENERGIZER EL123AP (x2) WARNING CO SENSITIVITY/ SENSIBILITÉ CO 400PPM 150PPM 70PPM RESPONSE TIME/ DÉLAI DE RÉACTION 4-15 MINUTES 10-50 MINUTES 60-240 MINUTES 3178931 MANUFACTURED/FABRIQUÉ: YYYY/MMM/DD FCC ID: 2ACE9-5100060X IC: 12011A-5100060X REFER TO INSTALL GUIDE/SE REPORTER AU GUIDE D’INSTALLATION: APD0812 R1.6B RETURN FOR SERVICING TO / RENVOYER POUR SERVICE À: APOLLO, 25 CORPORATE DR, AUBURN HILLS, MI 48326, USA N’UTILISEZ QUE LES BATTERIES SPÉCIFIÉES. L’UTILISATION DE TOUT AUTRE TYPE POURRAIT NUIRE AU FONCTIONNEMENT DE L'APPAREIL AVERTISSEMENT USE ONLY BATTERIES SPECIFIED IN MARKING. USE OF A DIFFERENT BATTERY MAY HAVE A DETRIMENTAL EFFECT ON PRODUCT OPERATION APD0811 A201130 REPLACE 10 YRS FROM DATE OF MANUFACTURE/REMPLACER 10 ANS A LA DATE DE FABRICATION FOR HOUSEHOLD USE ONLY/ POUR UN USAGE DOMESTIQUE UNIQUEMENT DO NOT INSTALL IN AMBIENT OVER 100°F (37.8°C)/N'INSTALLEZ PAS DANS UNE TEMPERATURE AMBIANTE AU-DESSUS DE 100°F (37.8°C) SUPPLEMENTARY HEAT RATING: 135°F (57.2°C)/ CHALEUR MAXIMALE: 135°F (57.2°C) MANUFACTURED BY/FABRIQUÉE PAR: APOLLO, 25 CORPORATE DR, AUBURN HILLS, MI 48326, USA FREQUENCY/FRÉQUENCE: 345MHz 3 RED 4 RED 1 GRN, 1 BLU, 12 SEC 3 YEL, 4 SEC 1 YEL, 4 SEC 2 YEL, 8 SEC 5 YEL, 12 SEC 1 YEL, 8 SEC 1 YEL, 12 SEC 1 YEL, 1 GRN, 12 SEC 1 GRN, 12 SEC FIRE ALARM CO ALARM CO TEST MODE FREEZE FAULT CO FAULT END OF LIFE DIRTY LOW BATTERY TAMPER NORMAL INDICATOR LEDSTATUS 3 ROUGE 4 ROUGE 1 VERT, 1 BLEU, 12 SEC 3 JAUNE, 4 SEC 1 JAUNE, 4 SEC 2 JAUNE, 8 SEC 5 JAUNE, 12 SEC 1 JAUNE, 8 SEC 1 JAUNE, 12 SEC 1 JAUNE, 1 VERT, 12 SEC 1 VERT, 12 SEC ALARME INCENDIE ALARME CO TEST DU CO GELER PANNE PANNE CO FIN DE VIE SALE BATTERIE FAIBLE ALTÉRER NORMAL INDICATEUR DELÉTAT SMOKE SENSITIVITY/ SENSIBILITÉ À LA FUMÉE 2.00 - 3.34 % PER FOOT/PIED Notes: 1. Markings to be lasered or Pad Print and LBL0005 2. Use ribbon RIB0003 small core 3. Date format YYYY/MMM eg. 2029/SEP 4. Markings in RED subject to change A SHEET 2 OF 2 UNLESS OTHERWISE SPECIFIED: SCALE: 1:1 DWG. NO. A TITLE: NAMEDATE COMMENTS: MFG APPR. ENG APPR. CHECKED DRAWN PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF APOLLO AMERICA, INC.. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF APOLLO AMERICA, INC. IS PROHIBITED. 3 2 1 SIZE REV DRAWING IS FOR REFERENCE ONLY...CAD IS MASTER 51000-601 Callisto Combo Device Markings APD0811_601 4 C A R B O N M O N O X I D E A L A R M - 4 B E E P S F I R E A L A R M - 3 B E E P S F A U L T - 1 B E E P F I R E / F E U C O A L A R M E C O - 4 B I P S A L A R M E I N C E N D I E - 3 B I P S P A N N E - 1 B I P T E S T / S I L E N C I E U X T E S T / H U S H Y E L L O W - F A U L T / J A U N E - P A N N E G R E E N - O K / V E R T - O K R E D - A L A R M / R O U G E - A L A R M E N E P A S P E I N D R E D O N O T P A I N T REPLACE BY: YYYY/MMM
PCB0106 TOP PCB0106 BOTTOM PCB0107 TOP (Only board with Radio) PCB0107 BOTTOM (Only board with Radio)
Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 1 of 8 Issue: 1 Date: 30 November 2020 This document is intended to show detail of the internal construction of the model 51000-600 and 51000-601 Wireless Smoke, Heat and Carbon Monoxide detectors. Main enclosure with battery terminals installed Circuit board PCBAs PCB Trace Antenna Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 2 of 8 Issue: 1 Date: 30 November 2020 Lower PCBA underside Upper PCBA underside PCB Trace Antenna Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 3 of 8 Issue: 1 Date: 30 November 2020 Lower PCBA installed in main housing Upper PCBA prior to installation on lower PCBA in main housing Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 4 of 8 Issue: 1 Date: 30 November 2020 Upper PCBA installed on lower PCBA in main housing Additional Views Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 5 of 8 Issue: 1 Date: 30 November 2020 Soft plastic buttons and filter mesh Internal plastic cover with soft plastic buttons and filter mesh Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 6 of 8 Issue: 1 Date: 30 November 2020 Internal cover installed over PCBAs on main enclosure soft plastic buttons and filter mesh Alternate view of internal cover installed over PCBAs on main enclosure soft plastic buttons and filter mesh Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 7 of 8 Issue: 1 Date: 30 November 2020 Lid alongside main assembly Lid assembled to detector Title: Apollo Callisto Smoke/Heat/CO Detector Construction Owner: Engineering Author: Greg Radion Page: 8 of 8 Issue: 1 Date: 30 November 2020 Assembled detector with mounting base Complete detector attached to mounting base
Matthew Vernon 2014-04-25 Operation Description Wireless Smoke and Carbon Monoxide Detectors (51000-600), (51000-601) The wireless smoke and Carbon Monoxide detectors are designed for residential installation. The devices detect fire (smoke) or the presence of carbon monoxide and produce an audible alarm, and send radio notification to a control panel for monitoring and supervision. The two devices use the same radio and similar firmware. A processor regularly measures sensor input, battery status, and button input (for test/hush). The processor makes a calculation based on inputs and sets internal status flags to indicate normal, alarm, and trouble status. In alarm the piezo sounder is activated. Status is communicated from the main circuit board to the radio by means of digital logic signals. The radio monitors these signals for state changes. The radio transmits a frame of data when the state changes and at regular intervals depending on the detector state. For Models 51000-600 and 51000-601 all hardware and firmware remains identical, with the only difference being of a configuration bit set in production, which only allows use with this specific control panels.
Intertek 731 Enterprise Drive Lexington, KY 40510 Tel 859 226 1000 Fax 859 226 1040 www.intertek.com Apollo America Inc. TEST REPORT SCOPE OF WORK EMC TESTING – CALLISTO REPORT NUMBER 104139907LEX-001 ISSUE DATE 9/28/2020 PAGES 36 DOCUMENT CONTROL NUMBER Non-Specific EMC Report Shell Rev. December 2017 © 2017 INTERTEK This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services NA, Inc. EMC TEST REPORT (FULL COMPLIANCE) Report Number: 104139907LEX-001 Project Number: G104139907 Report Issue Date: 9/28/2020 Model(s) Tested: Callisto Standards: FCC Part 15.231 RSS-210 Issue 10 FCC Part 15 Subpart B ICES-003 Issue 6 RSS-Gen Issue 5 Tested by: Client: Intertek Testing Services NA, Inc. 731 Enterprise Dr. Lexington, KY 40510 USA Apollo America Inc. 25 Corporate Drive Auburn Hills, MI 48326-2919 USA Report prepared by Report reviewed by Bryan Taylor, Team Leader Brian Lackey, Staff Engineer Evaluation For: Apollo America Inc. Product: Callisto EMC Test Report Date: 9/28/2020 Non-Specific EMC Report Shell Rev. December 2017 Page 3 of 36 Report Number: 104139907LEX-001 Table of Contents 1 Introduction and Conclusion ..................................................................................................................... 4 2 Test Summary .......................................................................................................................................... 4 3 Client Information .................................................................................................................................... 5 4 Description of Equipment under Test and Variant Models .......................................................................... 6 5 Description of EUT Exercising .................................................................................................................... 7 6 System Setup and Method ........................................................................................................................ 8 7 Duty Cycle Correction Factor ..................................................................................................................... 9 8 Transmission Timing .............................................................................................................................. 14 9 Occupied Bandwidth .............................................................................................................................. 16 10 Radiated Fundamental and Spurious Emissions (Transmitter) ............................................................... 19 11 Antenna Requirement per FCC Part 15.203 .......................................................................................... 30 12 Radiated Emissions, (Idle Mode) ......................................................................................................... 31 13 Measurement Uncertainty .................................................................................................................. 35 14 Revision History ................................................................................................................................. 36 Evaluation For: Apollo America Inc. Product: Callisto EMC Test Report Date: 9/28/2020 Non-Specific EMC Report Shell Rev. December 2017 Page 4 of 36 Report Number: 104139907LEX-001 1 Introduction and Conclusion The tests indicated in section 2.0 were performed on the product constructed as described in section 4.0. The remaining test sections are the verbatim text from the actual data sheets used during the investigation. These test sections include the test name, the specified test Method, a list of the actual Test Equipment Used, documentation Photos, Results and raw Data. No additions, deviations, or exclusions have been made from the standard(s) unless specifically noted. Based on the results of our investigation, we have concluded the product tested complies with the requirements of the standard(s) indicated. The results obtained in this test report pertain only to the item(s) tested. Intertek does not make any claims of compliance for samples or variants which were not tested. 2 Test Summary Page Test full name FCC Reference IC Reference Result 9 Duty Cycle Correction Factor (ANSI C63.10: 2013) ANSI C63.10: 2013 ANSI C63.10: 2013 --- 14 Transmission Timing Measurements (ANSI C63.10: 2013) § 15.231(a) RSS-210 Issue 10 (A.1.1) Pass 16 Occupied Bandwidth (ANSI C63.10: 2013) § 15.231(c) RSS-210 Issue 10 (A.1.3) Pass 19 Radiated Emissions (Fundamental and Spurious) (ANSI C63.10: 2013) § 15.231(b) RSS-210 Issue 10 (A.1.2) Pass 30 Antenna Requirement per FCC Part 15.203 § 15.203 RSS-Gen Issue 5 (7.1.2) Pass 31 Radiated Emissions (Transmitters Idle) (ANSI C63.4: 2014) § 15.109 ICES-003 Issue 6 Pass --- Conducted Emission Limits (ANSI C63.4: 2014, ANSI C63.10: 2013) § 15.207, 15.107 ICES-003 Issue 5 , RSS-Gen Issue 6 (7.2.4) NA 1 1 The Callisto is battery powered and has no direct or indirect connections to the AC mains. Evaluation For: Apollo America Inc. Product: Callisto EMC Test Report Date: 9/28/2020 Non-Specific EMC Report Shell Rev. December 2017 Page…
Text truncated - open the document above for the full version.
Radiated Emissions Below 30MHz Radiated Emissions 30MHz – 1GHz Radiated Emissions Above 1GHz (Transmitter Active) Radiated Emissions Above 1GHz (Transmitter Idle)
25 Corporate Drive · Auburn Hills, Michigan · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 345 MHz - 345 MHz | - |

Wireless Smoke Heat Alarm
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Wireless Carbon Monoxide Alarm
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Wireless Smoke Heat Alarm
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Wireless Smoke and Carbon Monoxide Alarm
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Wireless Smoke and Heat Alarm
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter