2ACGBMCM3915OM247 MU3 MultiCom

Document Classification: Public OM247-MU (MultiCom ™ ) Safety Guide User Safety and Regulations Page 2Document Classification: Public This guide contains basic regulatory and safety information. Document Number: 94-0397-01 Revision: 1.0 Issue Date: 08/07/2014 About This Guide Page 3Document Classification: Public Operational Warnings Important information on safe and efficient operation. Read this information before using the device. For safe and efficient use of the device, observe the guidelines outlined below. Environmental Specification 10% to 90% humidity -20°C to +60°C Installation The equipment must be installed by a SERVICE PERSON. User Safety Page 4Document Classification: Public „Do not disassemble, open, crush, deform or puncture the product. „Do not modify, remanufacture, attempt to insert foreign objects, expose to fire, explosion or other hazards. Product Handling Page 5Document Classification: Public This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: „Reorient or relocate the receiving antenna. „Increase the separation between the equipment and receiver. „Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. „Consult the dealer or an experienced radio/TV technician for help. FCC Statements Page 6Document Classification: Public FCC Statements (continued) This product must be installed in such a way as to provide a normal operating separation distance of at least 20 cm from all persons Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This product meets the FCC Radiofrequency Emission Guidelines and is certified with the FCC as: FCC ID: 2ACGBMCM3915 The FCC ID is located on a label on the rear face of the product. Page 7Document Classification: Public We hereby declare that this device is in conformance to all essential requirements of the R&TTE Directive 1999/5/EC. This equipment is marked with the ‘CE’ symbol and can be used throughout the European Community. This indicates compliance with the R&TTE Directive 1999/5/ EC and meets the relevant parts of the following technical specifications: „EN60950-1:2006 „BS6317:1992 Clause 13.9.1 „EN55022:2006 „EN55024:1998 + A1:2001, A2:2003 „ES 201 021 Parts 1,2 & 3 „EN301 437 (iCTR37) „TBR38:1998 EU Regulatory Conformance This symbol indicates that this product should be recycled and not be disposed of in unsorted municipal waste. This product should be returned to the supplier for correct disposal.

Document Classification: Public OM247-MU (GSM) Safety Guide User Safety and Regulations Page 2Document Classification: Public This guide contains basic regulatory and safety information. Document Number: 94-0183-01 Revision: 1.0 Issue Date: 08/07/2014 About This Guide Page 3Document Classification: Public Operational Warnings Important information on safe and efficient operation. Read this information before using the device. For safe and efficient use of the device, observe the guidelines outlined below. Environmental Specification 10% to 90% humidity -20°C to +60°C Installation The equipment must be installed by a SERVICE PERSON. User Safety Page 4Document Classification: Public „Do not disassemble, open, crush, deform or puncture the product. „Do not modify, remanufacture, attempt to insert foreign objects, expose to fire, explosion or other hazards. Product Handling Page 5Document Classification: Public This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: „Reorient or relocate the receiving antenna. „Increase the separation between the equipment and receiver. „Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. „Consult the dealer or an experienced radio/TV technician for help. FCC Statements Page 6Document Classification: Public FCC Statements (continued) This product must be installed in such a way as to provide a normal operating separation distance of at least 20 cm from all persons Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This product meets the FCC Radiofrequency Emission Guidelines and is certified with the FCC as: FCC ID: 2ACBGMCM3915 The FCC ID is located on a label on the rear face of the product. Page 7Document Classification: Public We hereby declare that this device is in conformance to all essential requirements of the R&TTE Directive 1999/5/EC. This equipment is marked with the ‘CE’ symbol and can be used throughout the European Community. This indicates compliance with the R&TTE Directive 1999/5/ EC and meets the relevant parts of the following technical specifications: „EN60950-1:2006 „EN55022:2006 „EN55024:1998 + A1:2001, A2:2003 EU Regulatory Conformance This symbol indicates that this product should be recycled and not be disposed of in unsorted municipal waste. This product should be returned to the supplier for correct disposal.

Document Classification: Public OM247-MU (Landline) Safety Guide User Safety and Regulations Page 2Document Classification: Public This guide contains basic regulatory and safety information. Document Number: 94-0184-01 Revision: 1.0 Issue Date: 06/06/2014 About This Guide Page 3Document Classification: Public Operational Warnings Important information on safe and efficient operation. Read this information before using the device. For safe and efficient use of the device, observe the guidelines outlined below. Environmental Specification 10% to 90% humidity -20°C to +60°C Installation The equipment must be installed by a SERVICE PERSON. User Safety Page 4Document Classification: Public „Do not disassemble, open, crush, deform or puncture the product. „Do not modify, remanufacture, attempt to insert foreign objects, expose to fire, explosion or other hazards. Product Handling Page 5Document Classification: Public This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: „Reorient or relocate the receiving antenna. „Increase the separation between the equipment and receiver. „Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. „Consult the dealer or an experienced radio/TV technician for help. FCC Statements Page 6Document Classification: Public FCC Statements (continued) Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This product meets the FCC Radiofrequency Emission Guidelines and is certified with the FCC as: FCC ID: 2ACBGMCM3915 The FCC ID is located on a label on the rear face of the product. Page 7Document Classification: Public We hereby declare that this device is in conformance to all essential requirements of the R&TTE Directive 1999/5/EC. This equipment is marked with the ‘CE’ symbol and can be used throughout the European Community. This indicates compliance with the R&TTE Directive 1999/5/ EC and meets the relevant parts of the following technical specifications: „EN60950-1:2006 „BS6317:1992 Clause 13.9.1 „EN55022:2006 „EN55024:1998 + A1:2001, A2:2003 „ES 201 021 Parts 1,2 & 3 „EN301 437 (iCTR37) „TBR38:1998 EU Regulatory Conformance This symbol indicates that this product should be recycled and not be disposed of in unsorted municipal waste. This product should be returned to the supplier for correct disposal.

TRL 51F047 iss04

TRL 51F050 iss04 G4S Monitoring Technologies 3 Centurion Court Meridian East Meridian Business Park Leicester LE19 1TP REQUEST FOR CONFIDENTIALITY IN ACCORDANCE WITH FCC RULE 0.459 30/05/2014 TRaC GLOBAL LTD. 100 Frobisher Business Park Malvern Worcestershire WR14 1BX UK RE: Certification Application FCC ID: 2ACGBMCM3915 To Whom It May Concern: Please be advised that G4S monitoring Technologies Ltd request that the following information is to be held permanently confidential on behalf of G4S Monitoring technologies Ltd. • Track and Component Layout drawings • Technical documents: OM247 MU3 - System Overview • Block diagrams • Schematics • BOMs • Internal Photographs G4S monitoring Ltd have spent substantial effort in developing this product, in particular some of the tamper features are not available in competitor products. Having the information easily available to competitors would negate any advantage they have achieved by developing these features. The application contains technical information which G4S Monitoring Technologies deems to be trade secrets and propriety. If made public, the information might be used to the disadvantage of the applicant in the market place. The product is a sealed device (tamper-evident rivetted in production) and a non-consumer device serviceable only by the grantee. Thank you for your attention to this matter. Yours faithfully G4S Monitoring Technologies Ltd

TRL 51F050 iss04 G4S Monitoring Technologies 3 Centurion Court Meridian East Meridian Business Park Leicester LE19 1TP DECLARATION OF SIMILARITY Date 30/05/2014 TRaC GLOBAL LTD. 100 Frobisher Business Park Malvern Worcestershire WR14 1BX UK RE: Declaration of Similarity FCC ID: 2ACGBMCM3915 To Whom It May Concern: Please be advised that the models MCM3 (MU3 MultiCom) , MUM3 (MU3 GSM) and MUL3 (MU3 Landline) are electronically identical for the ISM transmitter. MCM3 (MU3 MultiCom) is the main model. MUM3 (MU3 GSM) and MUL3 (MU3 Landline) are product variants. All ISM RF measurements and test results are exactly the same. The difference between the models are extra GSM/Landline options which may be fitted on the main board : MU3 MultiCom main board has GSM + Landline phone options fitted, MU3 GSM main board has GSM option fitted, MU3 Landline main board has Landline phone option fitted. Thank you for your attention to this matter. Yours faithfully G4S Monitoring Technologies Ltd

MU3 915MHz Photographs Page 7 of 7 Document Classification: CONFIDENTIAL 4 External View: Topside 5 External View: Underside

G4S Monitoring Technologies Ltd +/- 1 +0.25 -0 +0.10 -0 +0.05 -0 +0 -0.25 +0 -0.10 +0 -0.05 X X.X X.XX 2:1 A 1245 A 2145 A4 NW 01 96-0185-4 A-700-MP POLYESTER SILVER THERMAL TRANSFER PRINTED AS DRAWING FCC RCM MU3 MULTI COMM LABEL DRAWING 28/04/14 CONFIDENTIAL Document Classification: NOTES - 1. DIMENSIONS FOR INSPECTION PURPOSES ONLY. FOR ALL OTHER DIMENSIONS REFER TO - 96-0185-4 FCC RCM MU3 MULTI COMM LABEL DRAWING.AI 2. PRINTED ON ADVANCED LABELS A-700-MP SILVER THERMAL TRANSFER POLYESTER LABEL STOCK 104μm THICK P/N 96-0017-4. 3. PRINTED COLOURS: TEXT AND LOGOS BLACK. 4. BACKED WITH 20μm #310 ACRYLIC ADHESIVE. 5. USE TRUE TYPE FONT:P/N - ARIEL SIZE 8 POINT, TEXT - ARIEL SIZE 5 POINT. MCMGMTXXXXXX Model No. MCM3 MUMGCS052371 FCC ID: 2ACGBMCM3915 Contains FCC ID: RI7GM862L FCC MU3 MULTI COMM CODE128 BARCODE 36.5 2.0 5.5 S/N FONT ARIAL 8 POINT ON CL SYMBOL MUST BE EQUALLY SPACED AND A MINIMUM OF 5MM TALL 1.0 2.0 9.25 9.25 MODEL NO. & FFC ID FONT ARIAL 5 POINT ON CL 40.0

G4S Monitoring Technologies Ltd +/- 1 +0.25 -0 +0.10 -0 +0.05 -0 +0 -0.25 +0 -0.10 +0 -0.05 X X.X X.XX 2:1 A 1245 A 2145 A4 NW 01 96-0187-4 A-700-MP POLYESTER SILVER THERMAL TRANSFER PRINTED AS DRAWING FCC RCM MU3 GSM LABEL DRAWING 28/04/14 CONFIDENTIAL Document Classification: NOTES - 1. DIMENSIONS FOR INSPECTION PURPOSES ONLY. FOR ALL OTHER DIMENSIONS REFER TO - 96-0187-4 FCC RCM MU3 GSM LABEL DRAWING.AI 2. PRINTED ON ADVANCED LABELS A-700-MP SILVER THERMAL TRANSFER POLYESTER LABEL STOCK 104μm THICK P/N 96-0017-4. 3. PRINTED COLOURS: TEXT AND LOGOS BLACK. 4. BACKED WITH 20μm #310 ACRYLIC ADHESIVE. 5. USE TRUE TYPE FONT:P/N - ARIEL SIZE 8 POINT, TEXT - ARIEL SIZE 5 POINT. MUMGMTXXXXXX Model No. MUM3 MUMGCS052371 FCC ID: 2ACGBMCM3915 Contains FCC ID: RI7GM862L FCC MU3 GSM CODE128 BARCODE 36.5 2.0 5.5 S/N FONT ARIAL 8 POINT ON CL SYMBOL MUST BE EQUALLY SPACED AND A MINIMUM OF 5MM TALL 1.0 2.0 9.25 9.25 MODEL NO. & FFC ID FONT ARIAL 5 POINT ON CL 40.0

G4S Monitoring Technologies Ltd +/- 1 +0.25 -0 +0.10 -0 +0.05 -0 +0 -0.25 +0 -0.10 +0 -0.05 X X.X X.XX 2:1 A 1245 A 2145 A4 NW 01 96-0188-4 A-700-MP POLYESTER SILVER THERMAL TRANSFER PRINTED AS DRAWING FCC RCM MU3 LANDLINE LABEL DRAWING 28/04/14 CONFIDENTIAL Document Classification: NOTES - 1. DIMENSIONS FOR INSPECTION PURPOSES ONLY. FOR ALL OTHER DIMENSIONS REFER TO - 96-0188-4 FCC RCM MU3 LANDLINE LABEL DRAWING.AI 2. PRINTED ON ADVANCED LABELS A-700-MP SILVER THERMAL TRANSFER POLYESTER LABEL STOCK 104μm THICK P/N 96-0017-4. 3. PRINTED COLOURS: TEXT AND LOGOS BLACK. 4. BACKED WITH 20μm #310 ACRYLIC ADHESIVE. 5. USE TRUE TYPE FONT:P/N - ARIEL SIZE 8 POINT, TEXT - ARIEL SIZE 5 POINT. MULGMTXXXXXX Model No. MUL3 MUMGCS052371 FCC ID: 2ACGBMCM3915 FCC MU3 LANDLINE CODE128 BARCODE 36.5 5.5 S/N FONT ARIAL 8 POINT ON CL SYMBOL MUST BE EQUALLY SPACED AND A MINIMUM OF 5MM TALL 1.0 2.0 9.25 9.25 MODEL NO. & FFC ID FONT ARIAL 5 POINT ON CL 40.0

A RADIO TEST REPORT FOR G4S Monitoring Technologies LTD ON OM247 MU3 Multicomm 915MHz 10-0173-4 DOCUMENT NO.TRA-016455WUS1 Total number of pages: 45 TRaC Wireless Test Report : TRA-016455WUS1 Applicant : G4S Monitoring Technologies Ltd. Apparatus : OM247 MU3 Multicomm 915MHz 10-0173-4 Specification(s) : CFR47 Part 15.249 Purpose of Test : Certification FCCID : 2ACGBMCM3915 Authorised by : : Radio Product Manager Issue Date : 30 th May 2014 Authorised Copy Number : PDF TRaC Global Test Report: TRA-016455WUS1 3 Contents Section 1: Introduction 4 1.1 General 4 1.2 Tests Requested By 5 1.3 Manufacturer 5 1.4 Apparatus Assessed 5 1.5 Test Result Summary 6 1.6 Notes Relating To The Assessment 7 1.7 Deviations from Test Standards 7 Section 2: Measurement Uncertainty 8 2.1 Measurement Uncertainty Values 8 Section 3: Modifications 10 3.1 Modifications Performed During Assessment 10 Appendix A: Formal Emission Test Results 11 A1 Transmitter Intentional Emission Radiated 12 A2 Transmitter Bandwidth 13 A3 Radiated Electric Field Emissions 14 A4 Unintentional Radiated Emissions 17 A5 Power Line Conducted Spurious Emissions 19 Appendix B: Supporting Graphical Data 23 Appendix C: Additional Test and Sample Details 32 Appendix D: Additional Information 38 Appendix E: Calculation of the duty cycle correction factor 39 Appendix F: Photographs and Figures 40 Appendix G: MPE Calculation 44 TRaC Global Test Report: TRA-016455WUS1 4 Section 1: Introduction 1.1 General This report contains an assessment of an apparatus against Electromagnetic Compatibility Standards based upon tests carried out on samples submitted to the Laboratory. Test performed by: TRaC Global [X] Unit E South Orbital Trading Park Hedon Road Hull, HU9 1NJ. United Kingdom. Telephone: +44 (0) 1482 801801 Fax: +44 (0) 1482 801806 TRaC Global [ ] Unit 1 Pendle Place Skelmersdale West Lancashire, WN8 9PN United Kingdom Telephone: +44 (0) 1695 556666 Fax: +44 (0) 1695 577077 Email: [email protected] Web site: http://www.tracglobal.com Tests performed by: A Longley Report author: A Longley This report must not be reproduced except in full without prior written permission from TRaC Global. TRaC Global Test Report: TRA-016455WUS1 5 1.2 Tests Requested By This testing in this report was requested by: G4S Monitoring Technologies Ltd. 3 Centurion Court Meridian Business Park Leicester LE19 1TP United Kingdom 1.3 Manufacturer As Above 1.4 Apparatus Assessed The following apparatus was assessed between 25 th March 2014 – 19 th May 2014: OM247 MU3 Multicomm 915MHz 10-0173-4 The above device is a Monitoring Unit for an ankle monitor containing a Radio Transceiver operating on 2 fixed frequencies (915.25 & 927.6 MHz) in the 902 – 928 MHz band. TRaC Global Test Report: TRA-016455WUS1 6 1.5 Test Result Summary Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. The statements relating to compliance with the standards below apply ONLY as qualified in the notes and deviations stated in sections 1.6 to 1.7 of this test report. Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. Test Type Regulation Measurement standard Result Title 47 of the CFR: Part 15 Subpart (c) Intentional Emission Field Strength 15.249 (a) ANSI C63.10:2009 Pass Intentional Emission Band Occupancy 15.215 (c) ANSI C63.10:2009 Pass Spurious Emissions Radiated <1000MHz 15.209 & 15.249 (a) (d) ANSI C63.10:2009 Pass Unintentional Radiated Spurious Emissions 15.109 ANSI C63.10:2009 Pass Power Line Conducted Spurious Emissions 15.207 ANSI C63.10:2009 Pass Abbreviations used in the above table: ANSI C 63.10:2009 is outside the scope of the laboratories UKAS accreditation. CFR : Code of Federal Regulations ANSI : American National Standards Institution REFE : Radiated Electric Field Emissions PLCE : Power Line Conducted Emissions TRaC Global Test Report: TRA-016455WUS1 7 1.6 Notes Relating To The Assessment With regard to this assessment, the following points should be noted: The results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 1.7 of this test report (Deviations from Test Standards). For emissions testing, throughout this test report, “Pass” indicates that the results for the sample as tested were below the specified limit (refer also to Section 2, Measurement Uncertainty). Where relevant, the apparatus was only assessed using the monitoring methods and susceptibility criteria defined in this report. All testing was performed under the following environmental conditions: Temperature : 17 to 23 °C Humidity : 45 to 75 % Barometric Pressure : 86 to 106 kPa All dates used in this report are in the format dd/mm/yy. This assessment has been performed in accordance with the requirements of CFR47 Part 2 & RSS-Gen. 1.7 Deviations from Test Standards There were no deviations from the standards tested to. TRaC Global Test Report: TRA-016455WUS1 8 Section 2: Measurement Uncertainty 2.1 Measurement Uncertainty Values For the test data recorded in accordance with note (iii) of Section 2.1 the following measurement uncertainty was calculated: Radio Testing – General Uncertainty Schedule All statements of uncertainty are expanded standard uncertainty using a coverage factor of 1.96 to give a 95% confidence where no required test level exists. [1] Adjacent Channel Power Uncertainty in test result = 1.86dB [2] Carrier Power Uncertainty in test result (Power Meter) = 1.08dB Uncertainty in test result (Spectrum Analyser) = 2.48dB [3] Effective Rad…

Text truncated - open the document above for the full version.