2ACIK-HSM25CMiracast Wireless Display Adapter

Miracast Dongle Miracast Dongle 1 of 10 Miracast Dongle Quick Manual ver 1.2 Before Getting Started  For better performance on the Miracast function, must use after re-booting your Smartphone.  Before connecting cables, please turn off all devices(TV/Dongle).  Connect the power cable(Micro USB cable) inside the package.  Some of Smartphone models specification depending on countries may not work with the Miracast Dongle. User must check the device whether it supports the functions.  Performance can be different by wireless environment. Appearance ① ④ ② ③ ① HDMI port output connector : HDMI A/V signal out( plug to HDMI IN port of TV rear panel) ② PBC/WPS button : button for Dongle setting ③ micro USB connector : for dongle power ④ LED : power and mode indication Miracast Dongle Miracast Dongle 2 of 10 Packaging Contents Miracast dongle microUSB power cable Installation  Connecting the Dongle's HDMI port to Display(TV) HDMI in port.  Connecting Display(TV) and Miracst Dongle with the Micro-USB cable. ( *microUSB cable is used for power of dongle) How to use Miracast dongle <Notice>  Please whether your Smartphone supports Miracast.  In order to use the DLNA function, a Smartphone or Laptop must be installed with a DLNA App or program. *For DLNA, please check whether your Smartphone/Tablet PC/Laptop support DLNA function. *Free DLNA program : you can download iMediaShare Personal for Android and iOS in iTune. * Samsung smart phones support "Samsung Link" App for DLNA and you can use this. For the usage this, you need to access internet temporary when you start the Samsung Link App.  For DLNA play, smart phone must be connected to External AP(WiFi Router) or Dongle itself AP in Soft AP mode. Push Button Configuration(PBC) menu  Mode changing or selecting specific function can be done by PBC button. Once you press PBC button, "Push Button Configuration" Menu will guide to choose PBC button action.  Push Button Configuration Menu items Miracast Dongle Miracast Dongle 3 of 10  WPS Start : it is for external AP connection for DLNA external AP mode. It searches external AP during 2min. (*This function is disabled and can be enabled for specific OEM model.)  Wi-Fi Mode Switch : mode switching between Miracast and DLNA(Soft AP mode).  Configuration Mode Switch : starting soft AP for Firmware S/W upgrading or device name change etc.  P2P Paring Accept : It is needed when you set Manual PBC in Auto PBC web configuration  Language Change : Language can be selected by cycle. Miracast Setting: Dongle setting : After connecting power, wait until you find 'Ready to connect' appearing on the screen. This default screen is Miracast/DLNA auto mode. < Miracast/DLNA Auto mode> Miracast Dongle Miracast Dongle 4 of 10 Smartphone Setting:  Go to the setting menu and search for Miracast , select to activate. * Miracast activation menu could be different by Smartphone's manufacturer. * Example: Samsung Galaxy S3/Note2 : more settings---> AllShare Cast Samsung Galaxy S4/Note3: settings ---> Screen Mirroring LG Optimus G/Gpro : Miracast Google Nexus 4 : Display ---> Wireless display on  After selecting Miracast, your Smartphone will start searching for the Dongle's signal. Find a match with your Dongle's ID showing up on the screen, and select.  In 30 seconds, your Smartphone screen will show up on the display and your successfully connected. your smart phone screen will be mirrored to TV. Miracast menu types in Android smart phones There are two ways to go Miracast menu as bellow. - quick menu shown by pulling down the top side of screen. - finding Miracast menu in the setting menu. Quick menu position in Samsung Galaxy model. By quick menu Samsung Galaxy S 4 Samsung Galaxy S 5 Samsung Galaxy Note 2 Samsung Galaxy Note 3 Miracast Dongle Miracast Dongle 5 of 10 Samsung Galaxy S3 Samsung Galaxy S4 Samsung Galaxy Note2 Samsung Galaxy Note3 DLNA Setting: There are two ways to set up DLNA ready mode as bellow. - by Soft AP mode: It is easy for DLNA setting because you don't need external AP. You can choose DLNA mode in the PBC configuration page. It is very useful in the place where Wi-Fi AP is not available. Ex) car, school, public place etc. - by connecting External AP router: You can setting up in the web configuration page. It is useful because you can access internet and share if the contents in the external AP network are shared. Connecting by Soft AP mode(recommended)  Power on miracast dongle.  Press the PBC button during 6 sec for mode changing.  Mode will be changed to DLNA mode(Soft AP mode).  You can find the the device with your Dongle name in the Wi-Fi AP list and connect the device in Wi-Fi AP list in the smart phone.  Go to "DLNA Play" section of this manual. <Soft AP mode screen > Miracast Dongle Miracast Dongle 6 of 10 Connecting by External AP mode  go to web configuration mode by using PBC button. Refer the "How to go web configuration page".  go to External AP configuration section and select available Wi-Fi external AP with pass key.  select the "Connect to the external AP now".  After reboot, you can see the external AP mode screen with external AP connected by your dongle.  connect your phone to the external AP and now ready to use DLNA in external AP mode. < External AP configuration section> <external AP mode ready screen> (*If external AP is turned off, Soft AP will be on instead of external AP) DLNA play  You prepare Soft AP mode or External AP mode with connected external AP.  On your laptop/Tablet PC/Smartphone, Select and connect to the external AP which has been setup with Dongle or Soft AP.  On your Laptop/PC/Tablet PC/Smartphone, run DLNA program/App.  On your Laptop PC/Smartphone, must select DLNA player device same as your Dongle name when you play the contents. Miracast Dongle Miracast Dongle 7 of 10  DLNA performance could be different by the environment. (AP routers ability/Smartphone ability) Example) iMediaShare Personal APP in Android and iPhone…

Text truncated - open the document above for the full version.

Hanshin Information Technology Co.,Ltd. 201 IT VENTURE TOWER, 694 Taprip-Dong, Yuseong-Gu, Daejeon, S. Korea Tel. +82-42-933-8507 / Fax. +82-42-933-8509 Date: November 11, 2014 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Hanshin Information Technology Co.,Ltd., hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project : - Product: Miracast Wireless Display Adapter - Model name: HSM25C - FCC ID: 2ACIK-HSM25C We affirm that between SIEMIC and Hanshin Information Technology Co.,Ltd., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, ______________________________________ Chae Jeong Sik /CEO /Hanshin Information Technology Co.,Ltd.

Hanshin Information Technology Co.,Ltd. 201 IT VENTURE TOWER, 694 Taprip-Dong, Yuseong-Gu, Daejeon, S. Korea Tel. +82-42-933-8507 / Fax. +82-42-933-8509 FCC Confidentiality Request Letter Date: November 11, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 Subject: Permanent Confidentiality Request for FCC ID: 2ACIK-HSM25C We hereby request confidential treatment of information accompanying this application as outlined below: • Block diagram • Schematics • Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, ______________________________________ Chae Jeong Sik /CEO /Hanshin Information Technology Co.,Ltd.

http://www.emc2000.co.kr EMC compliance Ltd. Page: 1 of 3 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea, 443-390, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. External photos of EUT http://www.emc2000.co.kr EMC compliance Ltd. Page: 2 of 3 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea, 443-390, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. http://www.emc2000.co.kr EMC compliance Ltd. Page: 3 of 3 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea, 443-390, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval.

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Lt d. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 44 3- 390, Kor ea 82-31 -336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced, except in full, Without the written approval. FCC ID Label info

http://www.emc2000.co.kr EMC compliance Ltd. Page: 1 of 1 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea, 443-390, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. Internal photos of EUT

http://www.emc2000.co.kr EMC compliance Ltd. Page: 1 of 2 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. * RF Exposure 1. Regulation According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this Chapter. Limits for Maximum Permissive Exposure: RF exposure is calculated. Frequency Range Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [㎽/㎠] Av e r ag ing Time [minute] Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.34 614 1.63 *(100) 30 1.34 ~ 30 824/f 2.19/f *(180/f 2 ) 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1 500 / / f/1 500 30 1 500 ~ 15 000 / / 1.0 30 f=frequency in ㎒, *= plane-wave equivalent power density MPE (Maximum Permissive Exposure) Prediction Predication of MPE limit at a given distance: Equation from page 18 of OET Bulletin 65, Edition 97-01  SPGRRPGS4 4 2  S = power density [㎽ /㎠] P = Power input to antenna [㎽] G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna [㎝] EUT: Maximum peak output power = 15.28 [㎽] (11.84 ㏈m) Antenna gain = 0.62 [㎽] (-2.05 ㏈i) 100 ㎽, at 20 cm from an antenna 6 [㏈i] S = PG/4πR² = 100 × 3.98 / (4 × π × 400) = 0.079 18 [㎽/㎠] < 1.0 [㎽/㎠] 15.28 ㎽, at 20 cm from an antenna -2.05 [㏈i] S = PG/4πR² = 0.001 90 [㎽/㎠] < 1.0 [㎽/㎠] 2. RF Exposure Compliance Issue The information should be included in the user’s manual: This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. http://www.emc2000.co.kr EMC compliance Ltd. Page: 2 of 2 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. 3. Calculation Result of RF Exposure * 802.11b Channel Frequency Ant Gain power power Power Density at 20 ㎝ Power Density at 2.5 ㎝ [㎒] [㏈i] [㏈m] [㎽] [㎽/㎠] [㎽/㎠] Lowest 2 412 0.62 10.54 11.32 0.001 41 0.089 93 Middle 2 437 0.62 10.89 12.27 0.001 52 0.097 48 Highest 2 462 0.62 10.83 12.11 0.001 50 0.096 14 * 802.11g Channel Frequency Ant Gain power power Power Density at 20 ㎝ Power Density at 2.5 ㎝ [㎒] [㏈i] [㏈m] [㎽] [㎽/㎠] [㎽/㎠] Lowest 2 412 0.62 11.44 13.93 0.001 73 0.110 64 Middle 2 437 0.62 11.84 15.28 0.001 90 0.121 31 Highest 2 462 0.62 11.52 14.19 0.001 76 0.112 70 * 802.11n HT20 Channel Frequency Ant Gain power power Power Density at 20 ㎝ Power Density at 2.5 ㎝ [㎒] [㏈i] [㏈m] [㎽] [㎽/㎠] [㎽/㎠] Lowest 2 412 0.62 11.99 15.80 0.001 96 0.125 45 Middle 2 437 0.62 11.79 15.10 0.001 87 0.119 94 Highest 2 462 0.62 11.48 14.08 0.001 75 0.111 79 * 802.11n HT40 Channel Frequency Ant Gain power power Power Density at 20 ㎝ Power Density at 2.5 ㎝ [㎒] [㏈i] [㏈m] [㎽] [㎽/㎠] [㎽/㎠] Lowest 2 422 0.62 10.88 12.25 0.001 52 0.097 26 Middle 2 437 0.62 11.58 14.38 0.001 78 0.114 21 Highest 2 452 0.62 10.96 12.46 0.001 55 0.098 96

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 2 of 54 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. [ Contents ] 1. Client information ............................................................................................................................................. 3 2. Laboratory information .................................................................................................................................... 4 3. Description of E.U.T. ......................................................................................................................................... 5 3.1 Basic description .......................................................................................................................................... 5 3.2 General description ....................................................................................................................................... 5 3.3 Test frequency .............................................................................................................................................. 6 3.4 Test Voltage .................................................................................................................................................. 6 4. Summary of test results .................................................................................................................................... 7 4.1 Standards & results ....................................................................................................................................... 7 4.2 Uncertainty ................................................................................................................................................... 7 5. Test results .......................................................................................................................................................... 8 5.1 Antenna Requirement ................................................................................................................................... 8 5.2 Maximum Peak Output Power ..................................................................................................................... 9 5.3 Peak Power Spectral Density ...................................................................................................................... 11 5.4 6 dB Bandwidth(DTS Channel Bandwidth) .............................................................................................. 22 5.5 Spurious Emission, Band Edge and Restricted bands ................................................................................ 43 5.6 Conducted Emission ................................................................................................................................... 52 6. Test equipment used for test ........................................................................................................................... 54 http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 3 of 54 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. 1. Client information Applicant: Hanshin Information Technology Co.,Ltd. Address: 201 IT VENTURE TOWER, 694 Taprip-Dong, Yuseong-Gu, Daejeon, S. Korea Telephone number: +82-42-933-8507 Facsimile number: +82-42-933-8509 Contact person: Shin, Hyeon Seob / [email protected] Manufacturer: Hanshin Information Technology Co.,Ltd. Address: 201 IT VENTURE TOWER, 694 Taprip-Dong, Yuseong-Gu, Daejeon, S. Korea http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 4 of 54 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. 2. Laboratory information Address EMC compliance Ltd. 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Telephone Number: 82-070-5008-1021 Facsimile Number: 82-505-299-8311 Certificate KOLAS No.: 231 FCC Site Designation No.: KR0040 FCC Site Registration No: 687132 VCCI Site Registration No.: R-3327, G-198, C-3706, T-1849 IC Site Registration No.:8035A-2 SITE MAP EMC Compliance Ltd. Suwon city http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 5 of 54 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. 3. Description of E.U.T. 3.1 Basic description Applicant: Hanshin Information Technology Co.,Ltd. Address of Applicant 201 IT VENTURE TOWER, 694 Taprip-Dong, Yuseong-Gu, Daejeon, S. Korea Manufacturer#1 Hanshin Information Technology Co.,Ltd. Address of Manufacturer 201 IT VENTURE TOWER, 694 Taprip-Dong, Yuseong-Gu, Daejeon, S. Korea Type of equipment Miracast Dongle Basic Model HSM25C Serial number N/A 3.2 General description Frequency Range 2 412 ㎒ ~ 2 462 ㎒ (802.11b/g/n_HT20MIMO) 2 422 ㎒ ~ 2 452 ㎒ (802.11n_HT40MIMO) Communication IEEE 802.11b/g/n_HT20, HT40 Type of Modulation CCK, OFDM Number of Channels 11 ch (802.11b/g/n_HT20), 9 ch(802.11n_HT40) Type of Antenna PCB Antenna Antenna Gain -2.05 ㏈i Transmit Power 11.99 ㏈m Power supply DC 5 V http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 6 of 54 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. 3.3 Test frequency For all test items, the low, middle and high channels of the modes were tested w…

Text truncated - open the document above for the full version.

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 1 of 2 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. Te s t setup photos * 9 ㎑ ~ 30 ㎒ * 1 ㎓ Over http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0189 EMC compliance Ltd. Page: 2 of 2 480-5, Sin-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced except in full, Without the written approval. *Conducted