2ACIKHS6630WCUWB Wireless USB Dongle

HS6630WC Dongle 1 of 12 User’s manual HS6630WC V1.0 HS6630WC Dongle 2 of 12 HS6630WC Dongle 3 of 12 FCC information FCC notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Notice "Equipment Authorization" Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under Title 47 CFR 15.519 (the FCC Rules and Regulations). The operation of this device is subject to the following restriction: The changes or substitutions of the antennas which are furnished with the device is prohibited. UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or satellite is prohibited. A UWB device operating under the provisions of this section shall transmit only when it is sending information to an associated receiver. The UWB intentional radiator shall cease transmission within 10 seconds unless it receives an acknowledgement from the associated receiver that its transmission is being received. An acknowledgement of reception must continue to be received by the UWB intentional radiator at least every 10 seconds or the UWB device must cease transmitting. UWB devices operating under the provisions of this section must be hand held, i.e.,they are relatively small devices that are primarily hand held while being operated and do not employ a fixed infrastructure. HS6630WC Dongle 4 of 12 IC Statement This UWB RF apparatus complies with Canadian RSS-GEN. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. HS6630WC Dongle 5 of 12 EU Limitations This device may not be installed into road or rail vehicles. HS6630WC Dongle 6 of 12 Contents 1. Package Components .............................................................................................................................................................. 7 2. Computer requirements ......................................................................................................................................................... 7 3. S/W installation .......................................................................................................................................................................... 8 4. Connecting Wireless USB dongle to USB port ............................................................................................................ 9 5. Cautions .......................................................................................................................................................................................11 6. HS6630WC specification ...................................................................................................................................................12 HS6630WC Dongle 7 of 12 1. Package Components Wireless Dongle 2. Computer requirements  1.2 GHz or higher processor (Intel® Pentium®/Celeron® family, or AMD K6®/AMD Athlon™/AMD Duron™ family, or compatible processor recommended. Intel® Core™ 2 Duo 2.0 GB or higher processor recommended for optimal video performance.)  512 MB memory or higher (1 GB memory or higher recommended)  USB 2.0 or USB 3.0 port  50 MB of available disk space  Microsoft® Windows® XP (32-bit edition) with SP2/SP3, or Microsoft® Windows Vista® (32-bit or 64-bit editions) with SP1 or Microsoft® Windows 7, 8 ® (32-bit or 64-bit editions). HS6630WC Dongle 8 of 12 3. S/W installation  Put the CD to computer CD driver which is provided.  Click the installation program in the CD  Install Wireless…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Hanshin Information Technology Co.,Ltd. June 26, 2014 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Hanshin Information Technology Co.,Ltd. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): FCC ID : 2ACIKHS6630WC, M/N : HS6630WC We affirm that between SIEMIC and Hanshin Information Technology Co.,Ltd. any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, JeongSik, Chae / CEO Hanshin Information Technology Co.,Ltd. (305-510) 201, IT Venture Tower, 694 Taprip-Dong, Yuseong-Gu, Daejeon, Korea

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 3.0 Hanshin Information Technology Co.,Ltd. June 26, 2014 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ACIKHS6630WC We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description - Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : JeongSik, Chae / CEO Contact information / address: Hanshin Information Technology Co.,Ltd. / (305-510) 201, IT Venture Tower, 694 Taprip-Dong, Yuseong-Gu, Daejeon, Korea SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 3.0 Hanshin Information Technology Co.,Ltd. June 26, 2014 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: 2ACIKHS6630WC To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - Manual - EXT PHOTO - INT PHOTO - Test PHOTO The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature : Client’s name / title : JeongSik, Chae / CEO Contact information / address: Hanshin Information Technology Co.,Ltd. / (305-510) 201, IT Venture Tower, 694 Taprip-Dong, Yuseong-Gu, Daejeon, Korea

FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 3 Upper Lower FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 3 Front Rear FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 3 ANTENNA- M/N: BWT-UWBHOR-001EX

FCC ID: 2ACIKHS6630WC Copyright Ⓒ 2014, LTA Co., Ltd. SAMPLE LABEL & LOCATION

FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 1 Main Board – Front Main Board – Rear

Ref. No.: LR500111406D Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 28 243 Jubug-Ri,Yangji-Myeon, Yongin-Si, Gyeonggi-Do, Korea 449-822 Tel: +82-31-323-6008 Fax: +82-31-323-6010 http://www.ltalab.com Dates of Tests: June 02~November 13, 2014 Test Report S/N: LR500111406D Test Site : LTA CO., LTD. CERTIFICATION OF COMPLIANCE FCC ID. APPLICANT Equipment Class : Ultra Wideband Transmitter (UWB) Manufacturing Description : UWB Wireless USB dongle Manufacturer : Hanshin Information Technology Co.,Ltd. Model name : HS6630WC Test Device Serial No.: : Identical prototype Rule Part(s) : FCC Part 15 Subpart F ; ANSI C-63.4-2009 Frequency Range : 3168MHz ~ 4752MHz Max. Output Power : Max 80.45 dBuV - Radiated Data of issue : November 17, 2014 This test report is issued under the authority of: The test was supervised by: Jae-Ho Lee, Manager Young-Jin Lee, Test Engineer This test result only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the test laboratory. This report must not be used by the applicant to claim product endorsement by any agency. NVLAP LAB Code.: 200723-0 2ACIKHS6630WC Hanshin Information Technology Co.,Ltd. Ref. No.: LR500111406D Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 28 TABLE OF CONTENTS 1. GENERAL INFORMATION -------------------------------------------------------------------------- 2. INFORMATION ABOUT TEST ITEM ------------------------------------------------------------- 3. TEST REPORT --------------------------------------------------------------------------------------------- 3.1 SUMMARY OF TESTS ------------------------------------------------------------------------------ 3.2 TECHNICAL CHARACTERISTICS TEST ------------------------------------------------------- 3.2.1 AC CONDUCTED EMISSIONS -------------------------------------------------------------- 3.2.2 OPERATIONAL LIMITATIONS -------------------------------------------------------------- 3.2.3 UWB BANDWIDTH MEASUREMENT --------------------------------------------------- 3.2.4 RADIATED EMISSIONS MEASUREMENT ----------------------------------------------- 3.2.5 RADIATED EMISSIONS GPS BANDS MEASUREMENT ------------------------------- 3.2.6 PEAK EMISSIONS WITHIN A 50MHz BANDWIDTH MEASUREMENT ---------- APPENDIX APPENDIX TEST EQUIPMENT USED FOR TESTS -------------------------------------------- 3 4 6 6 7 7 10 11 14 20 25 27 Ref. No.: LR500111406D Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 28 1. General information 1-1 Test Performed Company name : LTA Co., Ltd. Address : 243, Jubug-ri,Yangji-Myeon,Youngin-Si, Kyunggi-Do, Korea. 449-822 Web site : http://www.ltalab.com E-mail : [email protected] Telephone : +82-31-323-6008 Facsimile +82-31-323-6010 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competents of calibration and testing laboratory”. 1-2 Accredited agencies LTA Co., Ltd. is approved to perform EMC testing by the following agencies: Agency Country Accreditation No. Validity Reference NVLAP U.S.A 200723-0 2015-09-30 ECT accredited Lab. RRA KOREA KR0049 2015-03-06 EMC accredited Lab. FCC U.S.A 610755 2017-04-21 FCC filing FCC U.S.A 649054 2015-04-17 FCC CAB VCCI JAPAN R2133(10 m), C2307 2017-06-21 VCCI registration VCCI JAPAN T-2009 2016-12-23 VCCI registration VCCI JAPAN G-563 2015-05-28 VCCI registration IC CANADA 5799A-1 2015-06-21 IC filing KOLAS KOREA NO.551 2017-01-08 KOLAS accredited Lab. Ref. No.: LR500111406D Copyright ○ c 2014, LTA Co., Ltd. Page 4 of 28 2. Information about test item 2-1 Client & Manufacturer Company name : Hanshin Information Technology Co.,Ltd. Address : (305-510) 201, IT Venture Tower, 694 Taprip-Dong, Yuseong-Gu, Daejeon, Korea Tel / Fax : TEL No : +82-42-933-8507 / FAX No : +82-42-933-8509 2-2 Equipment Under Test (EUT) Trade name : FCC ID : 2ACIKHS6630WC Model name : HS6630WC Serial number : Identical prototype Date of receipt : June 02, 2014 EUT condition : Pre-production, not damaged Antenna type : Dipole Antenna Frequency Range : 3168MHz ~ 4752MHz RF output power : Max 80.45 dBuV - Radiated Type of Modulation : MB-OFDM Power Source : 5.0Vdc Firmware version : V1.0.1 Ref. No.: LR500111406D Copyright ○ c 2014, LTA Co., Ltd. Page 5 of 28 2-3 Ancillary Equipment Equipment Model No. Serial No. Manufacturer Notebook PP17L N/A DELL PRINTER STYLUS C65 N/A EPSON TV Moniter LE23R18(R) 63343HDP901391E SAMSUNG 2-4 Description of Test modes MODE SUB-BAND Frequency (MHZ) 1 1 3432 2 2 3960 3 3 4488 4 1,2,3 3432, 3960, 4488 NOTE: After pre-testing each mode, the combination mode 4(hopping mode) was the worst situation and only the data was presented in the following sections <Except for “Radiated Emissions in GPS Bands”, “UWB Bandwidth Measurement”, “Peak Emission Measurement”>. EUT configure mode Applicable to Description RE<1G RE≥1GGPS UB PE Frequency (MHZ) 1 - - √ √ √ 3432 2 - - √ √ √ 3960 3 - - √ √ √ 4488 4 √ √ √ √ √ 3432, 3960, 4488 Where RE<1G: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz UB:UBW Bandwidth PE: Peak Emission GPS: Radiated Emissions in GPS Bands Ref. No.: LR500111406D Copyright ○ c 2014, LTA Co., Ltd. Page 6 of 28 3. Test Report 3.1 Summary of tests FCC Part Section(s) Parameter Limit Test Condition Status (note 1) 15.207 AC Conducted Emissions EN 55022 Line Conducted C 15.519(a) Operational Limitations - Radiated C 15.519(b) UWB Bandwidth between 3100MHz to 10,600MHz C 15.519(c)/ 15.209 Radiated Emissions Refer to the 3.2.4 C 15.519(d) Radiated Emissions in GPS Bands 19.44dBuV/m at 1M C 15.519(e) Peak Emissions within a 50MHz Bandwidth 90.77dBuV/m at 1M C 15.203 Antenna requirement - - C Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable Note 2: The data in this test report are traceable to the national or international standards.  Antenna Requirement The Hanshin Information Technology Co.,Ltd. , FCC ID: 2ACIKHS6630WC unit complies with the requirement of §15.203. The antenna is Internal Dipole Antenna Th…

Text truncated - open the document above for the full version.

FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 3 Radiate Emission FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 3 Radiate Emission FCC ID: 2ACIKHS6630WC Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 3 Conducted Emission