2ADAT-T12S4T12-S4 Torquemeter
Hottinger Bruel & Kjaer GmbH
Click to zoom
Application Details
- Equipment Class
- DXX - Part 15 Low Power Communication Device Transmitter
- Date of Grant
- Nov 13, 2014
- Application Purpose
- Original Equipment
- Date of Application
- Nov 13, 2014
- Equipment Note
- T12-S4 Torquemeter
- Frequency Range
- 13.56000000 - 13.56000000
- Company
- Hottinger Bruel & Kjaer GmbH
- Country
- Germany
Documents & Files
Document Text
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Users Manual
A1979−10.0 en Digital Torque Transducer T12 Mounting Instructions 3 T12 A1979−10.0 enHBM ContentsPage Contents Safety instructions5.............................................. 1 Markings used9............................................... 1.1Symbols on the transducer and / or Stator9................... 1.2The markings used in this document10........................ 2 Scope of supply11............................................. 3 Operation11................................................... 4 Application12.................................................. 5 Signal flow13.................................................. 6 Structure and mode of operation14.............................. 7 Mechanical installation16....................................... 7.1Important precautions during installation16.................... 7.2Conditions on site17........................................ 7.3Mounting position17........................................ 7.4Installing the slotted disc (rotational speed measuring system only)18................................................... 7.5Installing the rotor19........................................ 7.6Fitting the protection against contact (option)21................ 7.7Installing the stator27....................................... 7.7.1 Preparing with the mounting kit (included among the items supplied)28.......................................... 7.7.2 Aligning the stator30.................................. 7.7.3 Stator installation over the protection against contact (option)32........................................... 7.8Optical rotational speed/angle of rotation measuring system (option)33................................................. 7.8.1 Axial alignment33.................................... 7.8.2 Radial alignment34................................... 8 LED status display36........................................... 8.1Measuring mode operation36................................ 8.2Rotor clearance setting mode operation36..................... 8.3Rotational speed measuring system setting mode operation36... 9 Electrical connection37......................................... 9.1General information37...................................... 9.2Shielding design39......................................... T12 4 A1979−10.0 enHBM 9.3Connector pin assignment39................................ 9.4Supply voltage43.......................................... 10 Shunt signal45................................................. 11 Load-carrying capacity46....................................... 12 TEDS47....................................................... 13 Maintenance54................................................. 14 Waste disposal and environmental protection55.................. 15 Specifications56............................................... 15.1 Nominal (rated) torque 100 Nm to 1 kNm56................... 15.2 Nominal (rated) torque 2 kNm to 10 kNm63................... 16 Dimensions70................................................. 16.1 Rotor 100 Nm to 200 Nm70................................ 16.2 Rotor 500 Nm to 10 kNm71................................ 16.3 Stator 100 Nm to 200 Nm with rot.speed meas. system72...... 16.4 Stator 100 Nm to 200 Nm with rot. speed meas. system73..... 16.5 Stator 100 Nm to 10 kNm with rot. speed meas. system74..... 16.6 Stator 100 Nm to 200 Nm with prot. against contact75......... 16.7 Stator 100 Nm to 200 Nm with prot. against contact76......... 16.8 Stator 500 Nm to 1 kNm with prot. against contact77.......... 16.9 Stator 2 kNm to 10 kNm with prot. against contact78........... 16.9.1 Protection against contact plates 100 Nm to 200 Nm79... 16.9.2 Protection against contact plates 500 Nm to 10 kNm79... 16.10 Mounting dimensions80..................................... 17 Supplementary technical information81.......................... 18 Condition at the time of delivery82............................... 19 Ordering numbers87........................................... 20 Accessories88................................................. 5 T12 A1979−10.0 enHBM Safety instructions FCC Compliance & Advisory Statement for Option 7, Code U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including in- terference that may cause undesired operation. The FCC identifier or the unique identifier, as appropriate, must be displayed on the device. ModelFCC IDIC T12, 100 Nm, 200 Nm2ADAT−T12S212438A−T12S2 T12, 500 Nm, 1 kNm2ADAT−T12S312438A−T12S3 T12, 2 kNm, 3 kNm2ADAT−T12S412438A−T12S4 T12, 5 kNm2ADAT−T12S512438A−T12S5 T12, 10 kNm2ADAT−T12S612438A−T12S6 The FCC ID number in dependence of measuring range: label example only on the Stator FCC ID and IC number range. Label example with FCC ID and IC number. Location on the stator of the device. FCC ID: 2ADAT-T12S2 IC: 12438AT12S2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Fig 1.1:Example of the label Industry Canada for Option 7, Code U IC: 12483A−T12S2 This device complies with Industry Canada standard RSS210. This device complies with Industry Canada license−exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norme RSS210 d’Industrie Canada. T12 6 A1979−10.0 enHBM Cet appareil est conforme aux normes d’exemption de licence RSS d’Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence et …
Text truncated - open the document above for the full version.
Cover Letter(s)
Variants for FCC-Certification Model T12S4 HBM: public 1 15.10.2014 © HBM Type Approval Electrical Parts Variations of mechanical parts of rotor (variations have no influence on RF characteristics) T12S4 Variants 2 15.10.2014 HBM: public customized 2kNm 3kNm FCC ID: 2ADAT-T12S4 IC: 12438A-T12S4 + ØD=179mm ØD © HBM 3 HBM: public 15.10.2014 Basis elements (stator and all electrical parts on the rotor) are always the same Same RF characteristics: •All types of one size have the same stator, same stator PCB, same primary coil, same rotor PCB, same secondary coil on the rotor and have complete metallic housing of rotor and stator. Possible mechanical modifications (no influence on RF characteristics): •Variations of the thickness of the strain detection zone to realize different torque ranges (e.g. 100Nm, 200Nm,...) •Variations of flanges (e.g. diameter of PCD, length, ...) to realize different mechanical interface (mountable to customers counter flange) Possible options (no influence on RF characteristics): •Profibus Interface •Optical speed sensor Strain detection zone Rotor PCB Stator (including primary coil, (for each size defined diameter) Secondary coil on rotor Mechanical variations (examples) Flange ØD T12S4 Variants
External Photos
Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public External Photos T12 S4
ID Label/Location Info
Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public LABEL Position Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public Schriftgröße/n - Font size/s FCC ID bzw. CI Code min. 8 Punkte [*pt] = ~2,8 mm Stellungnahme - Statement Text min. 5 Punkte [*pt] = ~1,8 mm *DTO-Punkte / 1 pt = 0,35 27 mm Abmessungen – Dimension [mm] B = 50,0 +2 H = 18,0 +2 R = 1,0 ±0,2 Material: self-adhesive polyester security film, 60 μm Color: silver, matt coated Adhesive: Permanent adhesive Temperature range: -40 ° C to +150 ° C Characteristics: weather resistant, sea water, resistant to many solvents, weak acids and alkalis
Internal Photos
Page 1 of 44 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-210 Issue 8 Telephone: +49 9194 9016 Telefax: +49 9194 8125 Mail: [email protected] Web: http://www.emcc.de EMCCons DR. RAŠEK GmbH & Co. KG Moggast, Boelwiese 8 91320 Ebermannstadt Germany FCC Registration # 878769 Industry Canada Listing # 3464C 040197BBC Page 1 of 6 ANNEX 2 TO TEST REPORT # EMCC-040197BBC, 2014-11-13 PHOTOGRAPHS OF EQUIPMENT UNDER TEST (EUT) EQUIPMENT UNDER TEST: Trade Name: T12 Type Designation(s): S4 Serial Number: 161130094 (Rotor); Test sample, no serial number (Stator) Equipment Class: Low Power Transceiver Manufacturer: Hottinger Baldwin Messtechnik GmbH Address: Im Tiefen See 45 64293 Darmstadt Germany Phone: +49 6151 803-681 Fax: +49 6151 803-98790 RELEVANT STANDARD(S): 47 CFR 15.225 MEASUREMENT PROCEDURE: RSS-Gen Issue 3 ANSI C63.10-2009 Other CONTENTS Page 1 Internal Photos of T12 TYPE S4: Rotor .......................................................................................................................................... 2 2 Internal Photos of T12 TYPE S4: Stator ......................................................................................................................................... 4 3 Internal Photos of T12 TYPE S4: Stator Head................................................................................................................................ 5 An n e x 2 t o Test Report # EMCC-040197BBC Page 2 of 6 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC 1 INTERNAL PHOTOS OF T12 TYPE S4: ROTOR Entire EUT, rotor installed on a test fixture The rotor includes 4 PCB* PCB 1 front side* PCB 1 rear side* PCB 2 front side* PCB 2 rear side* * Internal pictures provided by customer. An n e x 2 t o Test Report # EMCC-040197BBC Page 3 of 6 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC PCB 3 front side* PCB 3 rear side* PCB 4 front side* PCB 4 rear side* intentionally left blank intentionally left blank * Internal pictures provided by customer. An n e x 2 t o Test Report # EMCC-040197BBC Page 4 of 6 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC 2 INTERNAL PHOTOS OF T12 TYPE S4: STATOR Entire EUT, stator installed on a test fixture All PCBs are covered with a potting component* Controller PCB front side* Controller PCB rear side* Supply - Interface PCB front side* Supply - Interface PCB rear side* * Internal pictures provided by customer. An n e x 2 t o Test Report # EMCC-040197BBC Page 5 of 6 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC 3 INTERNAL PHOTOS OF T12 TYPE S4: STATOR HEAD Entire EUT, stator with rotor Bottom view of the stator* Bottom view of the stator head with covered ribbon cable* Stator head with ribbon cable covered with copper foil* Stator head PCB front side, copper foil removed from ribbon cable* An n e x 2 t o Test Report # EMCC-040197BBC Page 6 of 6 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC Stator head PCB front side, copper foil removed from ribbon cable* * Internal pictures provided by customer.
Internal Photos
Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public Internal Photos T12S4 Rotor The rotor includes 4 PCB Front Rear Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public Stator All PCBs are covered with a potting component Front Rear Managing Director: Andreas Hüllhorst – Chairman of the Board: Eoghan O’Lionaird Registered at Darmstadt HRB 1147 HBM: public Stator Head
Test Report
Page 1 of 35 Vnoç,ç'' TEST REPORT # EMCC-04019788C, 2014-'n -13 EQUIPMENT UNDER TEST: Trade Name: T12 Type Designation(s): 54 Serial Number: Rotor: 161130094, Stator: Test sample, no serial number Equipment Class: Low Power Transceiver Manufacturer: Hottinger Baldwin Messtechnik GmbH Address: lm Tiefen See 45 64293 Darmstadt Germany Phone: +49 6151 803-681 Fax: +49 6151 803-98790 RELEVANT STANDARD(S): 47 CFR 15.225, RSS-210 lssue I MEASUREMENT PROCEDURE: X Rss-cen tssue 3 X nrust c63.10-2009 n other TEST REPORT PREPARED BY: Ludwig Kraft EMCCons DR. RASEK GmbH & Co. Moggast, Boelwiese I 91320 Ebermannstadt Germany Phone: +49 9194 9016 Fax: +4991948125 E-mail: [email protected] KG TEST PERSONNEL: Jø/ Ludwig Kraft HEAD OF GROUP: EMcCons on. nRSEf GmbH & Co. KG Moggast, Boelwiese I 91320 Ebermannstadt Germany FCC Registration # 878769 lndustry Canada Listing # 3464C 040r9788C E!lC. Rac o, Sa:et7 ard En,/ircÕrêr:al Testirg ( oouhl*." Telephone: +49 9194 9016 Telefax: +49 9194 8125 Mail: [email protected] Web: http://riwrrrr.emcc.de Akkred¡tierungrstel le 0.P1.12067.01 00 Test Report # EMCC-040197BBC Page 2 of 35 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC CONTENTS Page 1 GENERAL INFORMATION ............................................................................................................................................................... 4 1.1 Purpose ............................................................................................................................................................................. 4 1.2 Limits and Reservations................................................................................................................................................... 4 1.3 Test Location .................................................................................................................................................................... 4 1.4 Manufacturer ..................................................................................................................................................................... 4 1.5 Dates and Test Location................................................................................................................................................... 5 1.6 Ordering Information ........................................................................................................................................................ 5 1.7 Climatic Conditions .......................................................................................................................................................... 5 2 Product Description ......................................................................................................................................................................... 6 2.1 Equipment Under Test (EUT) ........................................................................................................................................... 6 2.2 Intended Use ..................................................................................................................................................................... 6 2.3 EUT Peripherals/Simulators ............................................................................................................................................. 7 2.4 Mode of operation during testing and test set-up .......................................................................................................... 8 2.5 Modifications required for compliance ........................................................................................................................... 8 3 Test Results Summary .................................................................................................................................................................... 9 4 Antenna Requirement .................................................................................................................................................................... 10 4.1 Regulation ....................................................................................................................................................................... 10 4.2 Result ............................................................................................................................................................................... 10 5 Power line Conducted Emissions Test ........................................................................................................................................ 11 5.1 Regulation ....................................................................................................................................................................... 11 5.2 Test Equipment ............................................................................................................................................................... 12 5.3 Test Procedures .............................................................................................................................................................. 12 5.4 Test Result ...................................................................................................................................................................... 12 5.5 Measurement Plots ......................................................................................................................................................... 13 6 Spectrum Mask .............................................................................................................................................................................. 14 6.1 Regulation .........................................................................................................................................................…
Text truncated - open the document above for the full version.
Test Setup Photos
Page 1 of 44 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-210 Issue 8 Telephone: +49 9194 9016 Telefax: +49 9194 8125 Mail: [email protected] Web: http://www.emcc.de EMCCons DR. RAŠEK GmbH & Co. KG Moggast, Boelwiese 8 91320 Ebermannstadt Germany FCC Registration # 878769 Industry Canada Listing # 3464C 040197BBC Page 1 of 3 ANNEX 1 TO TEST REPORT # EMCC-040197BBC, 2014-11-13 PHOTOGRAPHS OF TEST SET-UP EQUIPMENT UNDER TEST: Trade Name: T12 Type Designation(s): S4 Serial Number: 161130094 (Rotor); Test sample, no serial number (Stator) Equipment Class: Low Power Transceiver Manufacturer: Hottinger Baldwin Messtechnik GmbH Address: Im Tiefen See 45 64293 Darmstadt Germany Phone: +49 6151 803-681 Fax: +49 6151 803-98790 RELEVANT STANDARD(S): 47 CFR 15.225; RSS-210 Issue 8 MEASUREMENT PROCEDURE: RSS-Gen Issue 3 ANSI C63.10-2009 Other CONTENTS Page 1 Radiated and conducted Emissions test ....................................................................................................................................... 2 2 Carrier frequency stability ............................................................................................................................................................... 3 An n e x 1 t o Test Report # EMCC-040197BBC Page 2 of 3 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC 1 RADIATED AND CONDUCTED EMISSIONS TEST Radiated emissions measurement at 3 m distance 9 kHz – 30 MHz Radiated emissions measurement at 3 m distance, 30 MHz – 149.16 MHz Conducted emissions measurement 9 kHz – 30 MHz Conducted emissions measurement 9 kHz – 30 MHz An n e x 1 t o Test Report # EMCC-040197BBC Page 3 of 3 Issue Date: 2014-11-13 Test of HBM T12 type S4 to 47 CFR 15.225 and RSS-2 1 0 I s s u e 8 © EMCCons DR. RAŠEK GmbH & Co. KG 2014 040197BBC 2 CARRIER FREQUENCY STABILITY Test setup Detailed view inside climatic chamber intentionally left blank intentionally left blank
Contact Information
Applicant
Michael Korner
Test Firm
EMCCons Dr. Rasek GmbH & Co.KGChristian Kreller
Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 13.56 MHz - 13.56 MHz | - |
Other Applications from Hottinger Bruel & Kjaer GmbH
2ADAT-TJ1S8-2K
Mar 16, 2021TJ1S8-2K Torquemeter
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
2ADAT-TCAS4
Nov 04, 2020TCAS4 Torquemeter
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
2ADAT-T40S0TOS1
Dec 13, 2015T40 Torquemeter
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
2ADAT-TJ1S6
Jun 11, 2015TJ1S6 Torquemeter
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
2ADAT-T10S2TOS6
Feb 18, 2015T10-S2TOS6 Torquemeter
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter