2ADOW-P189W10Power Bank

Size 115*75mm POLYMER POWER BANK P189W10 USER MANUAL Product Guide 1 Accessories Host User manual Cable 2 Specification 3 Overview Charging digital devices: Once the power bank is connected to the digital device, the device shall be charged. Charging power bank: See below diagram,the white indicator is flickering when charging.It will stop flicker and all the indicators turn in white after fully charged.Please remove the adapter safely after power bank is fully charged. Adapter AC 100-240V Operation introduction QC 3.0 Output Type-C Input Dimensions Weight Battery Capacity ModelP189W10 69x136.6x17.6mm 245±10g 10000mAh/3.7V/37Wh Type-C Output Warranty Card Thank you very much for using our products. According to the prescription, anybelongs to under normal usage circumstance cause because of the product quality's problem of breakdown,our company will be responsible for giving free maintain during this period. Free maintain won't be given under the following circumstance: 1.Without Protection to fix warrantees and the purchasing invoice. 2.The protect to fix card or purchasing invoice has been changed. 3.The breakdown and damage caused by the Force majeure. 4.The breakdown,damaged because of the transportation or handling. 5.The breakdown caused by the manipulation that hasn't follow the requests of the Manual. 6.The damage caused by the dismantle movement of non-our- company authorized maintainer. In protect fix the period,customers can bring the purchasing invoice and the customer couplet that has filled to the vendor,and please send back to HAME for repair by the vendor. Matters needing attention It is forbidden to put the equipment in high temperature and high humidity environment, lest cause equipment overhea -ting and internal short circuit and damage to equipment. Storage temperature not more than 45 degrees, high tem -perature storage for a long time can affect the service life of the machine. maintenance For a long time do not use the equipment should be the power plug from the outlet of down.At least half a year using a device to ensure the service life of equipment. If the equipment malfunction, please have qualified personnel maintenance, don't disassemble equipment without permission. IMPORTANT SAFETY INSTRUCTIONS: PD 5V 3A 9V 2A 12V 1.5A PD 5V 3A 9V 2A 12V 1.5A 5V 3A 9V 2A 12V 1.5A 3A 10W (Max) g) Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. h) Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. i) Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°C can be replaced by the temperature of 212°F. j) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. k) Switch off the power bank when not in use. SAVE THESE INSTRUCTIONS Made in china Hame Technology Co., Limited Add: 3/F, Plant #1, Huahan Industrial Park,No.16, Jinniu West Rd., Pingshan New District,Shenzhen 518118, China. Website: www.hametech.com Enterprice Standard：Q/HAME 002-2016 Hame Technology Co., Limited Add: 3/F, Plant #1, Huahan Industrial Park,No.16, Jinniu West Rd., Pingshan New District,Shenzhen 518118, China. Website: www.hametech.com WARNING – When using this product, basic precautions should always be followed, including the following: a) Read all the instructions before using the product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. c) Do not put fingers or hands into the product. d) Do not expose power bank to rain or snow. e) Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons. f) Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons. Total max. output Please read this user manual before using the product, then keep it in good condition. Battery indicator button ！ Type-C Wireless charger Type-C Input&Output USB OutputDisplay For charging digital devices. Input Output /Wireless charger Battery indicators Battery indicator button Self-charging LED indicators to show battery status Press to check the battery level Wireless charger Output *Compatible With Wireless Charging Stanard *Blinking light indicates recharging. Solid light indicates fully charged. Frequency band: 136.60 KHz -147.60 KHz H-field: -10.62 dBuA/m @10m OWIM GmbH & Co. KG Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfe…

Text truncated - open the document above for the full version.

HamedataTechnologyCo.,Limited Date:2021-6-22 TO: FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID21046 Regarding:FCCID:2ADOW-P189W10 Towhomitmayconcern: We,theundersigned,herebyauthorizeSGS-CSTCStandardsTechnicalServicesCo.,Ltd.(SGS)ShenzhenBranch andKenyXuinSGS-CSTCStandardsTechnicalServicesCo.,Ltd.(SGS)ShenzhenBranchtoactonourbehalfinall mannersrelatingtoapplicationforequipmentauthorizationwithrespecttotheFCCIDabove,includingsigningof alldocumentsrelatingtothesematters.Anyandallactscarriedoutbytheagentonourbehalfshallhavethesame effectasactsofourown. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,thatincludesFCC benefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.853(a). Whereouragentsignstheapplicationforcertificationonourbehalf,Iacknowledgethatallresponsibilityfor complyingwiththetermsandconditionsforCertification,asspecifiedbySGSNorthAmerica,Inc.,stillresideswith HamedataTechnologyCo.,Limited. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. PrintName:ZuoXinrongTitle: Signature: OnbehalfofCompany:HamedataTechnologyCo.,Limited Telephone:+86-755-28398777-8425 E-mail:[email protected]

HamedataTechnologyCo.,Limited TO: FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID21046 Regarding: ConfidentialityRequestregardingapplicationforFCCID:2ADOW-P189W10 LONGTERMCONFIDENTIALITY Pursuantto47CFRSection0.459and0.457ofthecommission’srules,theapplicantherebyrequestconfidential treatmentofthedocumentslistedbelow,associatedwiththecertificationapplicationreferencedabove. Schematic(s) BlockDiagrams OperationalDescriptions Thedocumentsabovecontainproprietaryinformationnotreleasedtothepublic.Publicdisclosureofthis informationmayproveharmfultothebusinessoftheapplicant. Sincerely, PrintName:ZuoXinrongTitle: Signature: OnbehalfofCompany:HamedataTechnologyCo.,Limited Telephone:+86-755-28398777-8425 E-mail:[email protected]

N/A

HamedataTechnologyCo.,Limited CoverLetter-WirelessChargerApproval Date:2021-06-22 Gentlemen: There’saPowerBankthatwouldliketohaveyourauthorizationasanInductivewirelesspower transferapplicationsapproval. Thespecificproductasbelow,PowerBank,withitsdesignedfeaturesandspecifieddescription, meetsspecialrequirementsforKDB680106D01section5.2requirements. Company: HamedataTechnologyCo.,Limited ProductName: PowerBank ModelNumber: P189W10, HG08292A-US, HG08292B-US FCCID: 2ADOW-P189W10 KDB680106D01Section5.2RequirementsProductTechnicalSpecificationResult a)Powertransferfrequencyislessthat1MHz136.60KHzto147.60KHzComplied b)Outputpowerfromeachprimarycoilislessthan orequalto15watts. 5watts,7.5watts,10wattsComplied c)Thetransfersystemincludesonlysingleprimary andsecondarycoils.Thisincludeschargingsystems thatmayhavemultipleprimarycoilsandclients thatareabletodetectandallowcouplingonly betweenindividualpairsofcoils Complied d)Clientdeviceisplaceddirectlyincontactwith thetransmitter. Complied e)MobileexposureconditionsonlyForinductiveapplicationswherethe primarydoesnotphysicallyattachto theclient,anditisintendedfor desktopuse,thedesktopguidancein KDB680106D01maybeapplied Complied f)TheaggregateH-fieldstrengthsat15cm surroundingthedeviceand20cmabovethetop surfacefromallsimultaneoustransmittingcoilsare demonstratedtobelessthan50%oftheMPElimit. PleaserefertoRFexposurereportComplied Sincerely, PrintName:ZuoXinrongTitle: Signature: OnbehalfofCompany:HamedataTechnologyCo.,Limited Telephone:+86-755-28398777-8425 E-mail:[email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZCR2106021515AT FCC ID: 2ADOW-P189W10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

PP PP Display ON/OFF PP PP Model A (black) 曂株䦚剋䉀Ⓟ Battery Capacity: 10000mAh/3.7V 37Wh Type-C Input: 5V 3A, 9V 2A , 12V 1.5A Type-C Output: 5V 3A, 9V 2A , 12V 1.5A Output: 5V 3A, 9V 2A , 12V 1.5A Output: Wireless charger 10W Max Total max. output:3A 1IMP11/60/100 FCC-ID2ADOW-P189W10 OWIM GmbH & Co. KG yymmdd Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY Made in China Power Bank Model: P189W10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 Internal Photos for SZCR2106021515AT FCC ID: 2ADOW-P189W10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151503 Page: 1 of 9 Keny Xu EMC Laboratory Manager 1 COVER PAGE Human Exposure Report Application No.: SZCR2106021515AT Applicant: Hamedata Technology Co., Limited Address of Applicant: 1st Zone, 3F, Plant#1, Huahan Industrial Park, No.16, Jinniu West Rd., Pingshan New District, Shenzhen, 518118 China Manufacturer: Hamedata Technology Co., Limited Address of Manufacturer: 3F, Building 1, Huahan Industrial Park, No 16, Jinniu West Rd., Pingshan New District., Shenzhen Factory: 1. Hamedata Technology Co., Limited 2. Hunan Hametech Technology co., Limited Address of Factory: 1. 3F, Building 1, Huahan Industrial Park, No 16, Jinniu West Rd., Pingshan New District., Shenzhen 2. 1~5 Building, Innovation Science Park, High Tech, Industrial Development District, Wuxi Town, Luxi County, Hunan Province, P.R.China Equipment Under Test (EUT): EUT Name: Power Bank Model No.: P189W10, HG08292A-US, HG08292B-US   Please refer to section 3.1 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: HAME FCC ID: 2ADOW-P189W10 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 Date of Receipt: 2021-06-11 Date of Test: 2021-06-16 to 2021-07-05 Date of Issue: 2021-07-06 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151503 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2021-07-06 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151503 Page: 3 of 9 2 Contents 1 COVER PAGE ..................................................................................................................................... 1 1 COVER PAGE ..................................................................................................................................... 1 2 CONTENTS ......................................................................................................................................... 3 3 GENERAL INFORMATION .................................................................................................................. 4 3.1 DETAILS OF E.U.T. ............................................................................................................................. 4 3.2 DESCRIPTION OF SUPPORT UNITS ........................................................................................................ 4 3.3 TEST LOCATION ................................................................................................................................. 5 3.4 TEST FACILITY ................................................................................................................................... 5 3.5 DEVIATION FROM STANDARDS .............................................................................................................. 5 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 5 4 EQUIPMENTS USED DURING TEST .................................................................................................. 6 5 TEST RESULTS .................................................................................................................................. 7 5.1 RF EXPOSURE TEST ........................................................................................................................... 7 5.1.1 E.U.T. Operation ...................................................................................................................... 7 5.1.2 Measurement Data ................................................................................................................. 8 6 PHOTOGRAPHS- RF EXPOSURE SETUP .......................................................................................... 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151503 Page: 4 of 9 3 General Information 3.1 Details of E.U.T. Power Supply: Lithium-ion rechargeable battery (DC 3.7V 10000mAh) which can be charged from Type-C port. Type-C Input: 5V/3A, 9V/2A, 12V/1.5A Type-C Output: 5V/3A, 9V/2A, 12V/1.5A USB-A Output: 5V/3A, 9V/2A, 12V/1.5A Wireless charger output: 10W Max. Cable(s): USB Cable 15cm Unshielded Operation frequency: 136.60kHz to 147.60kHz Modulation type: Load modulation Antenna type: Loop Antenna Remark: This device has been tested the worst status of full load and the device has been tested with load at 5W, 7.5W and 10W, the worst case 10W is reported only. Declaration of EUT Family Grouping: Model No.: P189W10, HG08292A-US, HG08292B-US Only the model P189W10 was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on trade mark and model No. 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Load Resistor SGS N/A REF. No.SEA06A00 Mobile Phone SAMSUNG SM-G9500 REF. No.SEA16J00 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151503 Page: 5 of 9 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch E&E Lab, No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong,China 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accr…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151502 Page: 1 of 23 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2106021515AT Applicant: Hamedata Technology Co., Limited Address of Applicant: 1st Zone, 3F, Plant#1, Huahan Industrial Park, No.16, Jinniu West Rd., Pingshan New District, Shenzhen, 518118 China Manufacturer: Hamedata Technology Co., Limited Address of Manufacturer: 3F, Building 1, Huahan Industrial Park, No 16, Jinniu West Rd., Pingshan New District., Shenzhen Factory: 1. Hamedata Technology Co., Limited 2. Hunan Hametech Technology co., Limited Address of Factory: 1. 3F, Building 1, Huahan Industrial Park, No 16, Jinniu West Rd., Pingshan New District., Shenzhen 2. 1~5 Building, Innovation Science Park, High Tech, Industrial Development District, Wuxi Town, Luxi County, Hunan Province, P.R.China Equipment Under Test (EUT): EUT Name: Power Bank Model No.: P189W10, HG08292A-US, HG08292B-US ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: HAME FCC ID: 2ADOW-P189W10 Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2021-06-11 Date of Test: 2021-06-16 to 2021-07-05 Date of Issue: 2021-07-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151502 Page: 2 of 23 Revision Record Version Chapter Date Modifier Remark 01 2021-07-06 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151502 Page: 3 of 23 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass 20dB Bandwidth ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Declaration of EUT Family Grouping: Model No.: P189W10, HG08292A-US, HG08292B-US Only the model P189W10 was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on trade mark and model No. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210602151502 Page: 4 of 23 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 DETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 4.4 TEST LOCATION ............................................................................................................................. 6 4.5 TEST FACILITY ............................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 6 5 EQUIPMENT LIST ............................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................. 9 6.1 ANTENNA REQUIREMENT ................................................................................................................. 9 6.1.1 Test Requirement: ................................................................................................................... 9 6.1.2 Conclusion ............................................................................................................................... 9 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................10 7.1 RADIATED EMISSIONS (30MHZ-1GHZ) ............................................................................................10 7.1.1 E.U.T. Operation .....................................................................................................................10 7.1.2 Test Mode Description ............................................................................................................10 7.1.3 Test Setup Diagram ................................................................................................................11 7.1.4 Measurement Procedure and Data .........................................................................................11 7.2 RADIATED EMISSIONS (9KHZ-30MHZ) ...................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 Setup Photos for SZCR2106021515AT FCC ID: 2ADOW-P189W10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 Photographs Radiated Emissions (30MHz-1GHz) Radiated Emissions (9kHz-30MHz)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 RF Exposure Setup Photos for SZCR2106021515AT FCC ID: 2ADOW-P189W10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 Photographs Top Side 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 Side 2 Side 3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4 Side 4