2ADYL-JPD-BFS300Body Fat Scale

Shenzhen Jumper Medical Equipment Co.,Ltd. D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, China,518103 Web: www.jumper-medical.com E-mail: [email protected] Tel: +86-755-26696279 4 1. T o prevent s lipping, do not place the scale on a slippery f loor, and do not use i t when your f eet or t he scale are wet. 2. Always stand i n the middle of t he scale, t o prevent i t f rom accidentally f lipping over while weighing yourself. 3. Only use the scale i n a dry environment, and do not i mmerse i t i n water. 4. Wipe the surface of t he scale with a damp cloth and mild detergent. Do not use any organic solvents or other chemicals. 5. After t he batteries are depleted, i mmediately remove th em to avoid potential l eaking and corrosion. 6. This scale i s not r ecommended for persons with a pacemake r or other i mplanted medical d evices. The accuracy of t he body composition data may vary when used by professional a thletes, pregnant women, and certain other i ndividuals with special conditions. Precautions 5 1 Before measurement, you can install the batteries according to the correct battery polarity. Please kindly scan below QR code and download “JUMPER Health”to your phone. Remark: Our APP is available for IOS and android device with Wireless. Specifications The following symbol s ignifies t hat t his product has t o be disposed separately from ordinary household wastes at i ts end of l ife. Please kindly be aware that this i s your r esponsibility t o dispose the electronic equipment at r ecycling centers so as t o help conserve the natural r esources. Disposal a nd Recycling Information 2 Open “JUMPER Health” APP, complete the user registration, and login as instructed. Enter your nickname, gender, date of birth and height as instructed. Personal information is used to analyze your body composition. To ensure the accuracy of the results, please enter accurate personal information. Registration Place the scale on a hard, flat floor. Pairing the scale. Open “JUMPER Health” APP, select “Weight” to enter the weight measurement mode. Press the scale to keep it in power on status until the scale and app pair automatically. Please be barefoot as shown in the figure. Ensure feet to touch the four electrodes during measurement. The measurement is completed when the value on the LCD screen flashing, then the measured data will be displayed on the APP. After measurement, you can check the measured data via the “JUMPER Health” App. Note: The body composition data provided by this scale is only for reference and does not constitute medical advice. Weighing and Measuring Body Fat 3 Three default units available: kg/lb/st. The switch between kg/lb/st can be achieved via “JUMPER Health” App and scale. Converting Weight Units Press t he scale and do not measure weight until t he scale turns on and returns t o zero. Moving or bumping the scale may affect t he accuracy, i n which case you should weight again to make sure the measured data i s accurate. Weighing Items When weighing, a flashing "Lo" i ndicates a l ow battery l evel, and you should replace the batteries as soon as possible. When weighing, a flashing "Err" i ndicates the weight being measured exceeds 200 kg, which i s beyond the l imit of t he scale. Alert I ndications JPD-BFS300 Body Fat Sca le User Manual Manual Version: 1.0 Issuing Date:2023.06 Download APP with JUMPER Healt h Read this manual c arefull y before first use the body f at s cale, and keep i t f or f uture reference. Dimensions: 280 × 280 × 23.5 mm Net Weight: 1 .3 kg Weighing Units: kg / lb / st Display: LCD display Auto power off in 10 seconds Weighing Range: 3 k g - 200 kg Division: 0.1 kg / 0.2 lb Operating Temperature: 0 ~ 40°C Power Source: 3 x 1.5 V AAA batteries kg/lb/st kg/lb/st kg/lb/st kg/lb/st kg/lb/st This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. US Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Statement Installing the Batteries Download the APP

ShenZhen Jumper Medical Equipment Co., Ltd Covered Equipment Certification Attestation Letter 4/18/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2ADYL-JPD-BFS300 ShenZhen Jumper Medical Equipment Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. ShenZhen Jumper Medical Equipment Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Tiffany Zhang Title: RA manager Company Name: ShenZhen Jumper Medical Equipment Co., Ltd Date: 4/18/2024

ShenZhen Jumper Medical Equipment Co., Ltd D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China Statement Product: Body Fat Scale Model: JPD-BFS300 Additional Model: JPD-BFS100, JPD-BFS710, JPD-BFS200A, JPD-BFS200B, JPD-BFS200D, JPD-BFS101, JPD-BFS102, JPD-BFS300A Trademark : N/A We hereby state that JPD-BFS300 is tested model, other models are derivative models. The models are identical in circuit and PCB layout, only different on the model names. So the test data of JPD-BFS300 can represent the remaining models. Your assistance on this matter is highly appreciated. Y ours sincerely, S ignature: D ate: 2024/05/09 N ame: Tiffany Zhang Company Name: ShenZhen Jumper Medical Equipment Co., Ltd Address: D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China Tel / Fax: 86-755-26696279/86-755-26852025 E- Mail: [email protected]

ShenZhen Jumper Medical Equipment Co., Ltd 2024-04-18 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADYL-JPD-BFS300 Product Name: Body Fat Scale Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: •S chematics •Block diagram •Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Na me: Tiffany Zhang Title: RA manager Company: ShenZhen Jumper Medical Equipment Co., Ltd

ShenZhen Jumper Medical Equipment Co., Ltd 2024-04-18 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint SHENZHEN TONGCE TESTING LAB / 2101 & 2201, Zhenchang Factory Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China (Name of Agent company name andaddress) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonourbehalf,Iack nowledgethatallresponsibilityforcomplyingwiththetermsandconditionsforcertification,stillres ideswith ShenZhen Jumper Medical Equipment Co., Ltd / D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China (Applicant Nameandaddress) <Signature> Name: Tiffany Zhang Title: RA manager Applicant Company: ShenZhen Jumper Medical Equipment Co., Ltd

Page 1 of 3 Appendix C: Photographs of EUT Product: Body Fat Scale Model: JPD-BFS300 External Photos Page 2 of 3 Page 3 of 3

Label Artwork and Location Model: JPD-BFS300 Label: Size: L*W=60*25mm Location

Page 1 of 2 Appendix C: Photographs of EUT Product: Body Fat Scale Model: JPD-BFS300 Internal Photos Page 2 of 2 Antenna

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID. ............................ : 2ADYL-JPD-BFS300 Test Report No. ............... : TCT240110E039 Date of issue ................... : Apr. 17, 2024 Testing laboratory .......... : SHENZHEN TONGCE TESTING LAB Testing location/ address: 2101 & 2201, Zhenchang Factory Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China Applicant's name ............ : ShenZhen Jumper Medical Equipment Co., Ltd Address ........................... : D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China Manufacturer's name ... : ShenZhen Jumper Medical Equipment Co., Ltd Address ........................... : D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China Standard(s) ..................... : KDB 447498 D01 General RF Exposure Guidance v06 Product Name ................. : Body Fat Scale Trade Mark ...................... : N/A Model/Type reference..... : JPD-BFS300, JPD-BFS100, JPD-BFS710, JPD-BFS200A, JPD-BFS200B, JPD-BFS200D, JPD-BFS101, JPD-BFS102, JPD-BFS300A Rating(s).......................... : DC 4.5V (3*AAA Battery) Date of receipt of test item ......................................... : Jan. 10, 2024 Date (s) of performance of test ................................... : Jan. 10, 2024 ~ Apr. 17, 2024 Tested by (+signature) ... : Onnado YE Check by (+signature) .... : Beryl ZHAO Approved by (+signature): Tomsin General disclaimer: This report shall not be reproduced except in full, without the written approval of SHENZHEN TONGCE TESTING LAB. This document may be altered or revised by SHENZHEN TONGCE TESTING LAB personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT240110E039 Page 2 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Table of Contents 1. General Product Information .................................................................. 3 1.1. EUT description ..................................................................................................... 3 1.2. Model(s) list ............................................................................................................ 3 2. General Information ................................................................................. 4 2.1. Test environment and mode ................................................................................. 4 2.2. Description of Support Units ................................................................................ 4 3. Facilities and Accreditations .................................................................. 5 3.1. Facilities ................................................................................................................. 5 3.2. Location ................................................................................................................. 5 4. Test Results and Measurement Data ..................................................... 6 Report No.: TCT240110E039 Page 3 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. General Product Information 1.1. EUT description Product Name ....................... : Body Fat Scale Model/Type reference........... : JPD-BFS300 Sample Number....................: TCT240110E038-0101 Operation Frequency ........... : 2402MHz~2480MHz Modulation Type ................... : GFSK Antenna Type ........................ : PCB Antenna Antenna Gain ........................ : 2.6dBi Rating(s)................................ : DC 4.5V (3*AAA Battery) Note: The antenna gain listed in this report is provided by applicant, and the test laboratory is not responsible for this parameter. 1.2. Model(s) list No. Model No. Tested with 1 JPD-BFS300 Other models JPD-BFS100, JPD-BFS710, JPD-BFS200A, JPD-BFS200B, JPD-BFS200D, JPD-BFS101, JPD-BFS102, JPD-BFS300A Note: JPD-BFS300 is tested model, other models are derivative models. The models are identical in circuit and PCB layout, only different on the model names. So the test data of JPD-BFS300 can represent the remaining models. Report No.: TCT240110E039 Page 4 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 2. General Information 2.1. Test environment and mode Item Normal condition Temperature +25ºC Voltage DC 4.5V Humidity 56% Atmospheric Pressure: 1008 mbar Test Mode: Engineering mode: Keep the EUT in continuous transmitting by select channel 2.2. Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Equipment Model No. Serial No. FCC ID Trade Name / / / / / Note: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 3. For conducted measurements (Output Power, 20dB Occupied Bandwidth, Carrier Frequencies Separation, Hopping Channel Number, Dwell Time, Spurious Emissions), the antenna of EUT is connected to the test equipment via temporary antenna connector, the antenna connector is soldered on the antenna port of EUT, and the temporary antenna connector is listed in the Test Instruments. Report No.: TCT240110E039 Page 5 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 3. Facilities and Accreditations 3.1. Facilities The test facility is recognized, certified, or accredited by the following organizations: ● FCC - Registration No.: 645098 SHENZHEN TONGCE TESTING LAB Designation Number: CN1205 The testing lab has been registere…

Text truncated - open the document above for the full version.

Antenna specification Chipsea Technologies(Shenzhen)Corp.,Ltd. 1：Antenna Description Antenna Type Microtrip Antenna Antenna peak gain 2.6dBi Frequency range 2.402GHz～2.480GHz Connect type Direct Connect 2：Antenna picture on the PCB borad 3：Antenna radiation of 3D polar Solution frequency at 2.44G 3：Antenne radiation pattern Z-X plan Z-Y plan XY plan E plan

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID. ............................ : 2ADYL-JPD-BFS300 Test Report No. ............... : TCT240110E038 Date of issue ................... : Apr. 17, 2024 Testing laboratory .......... : SHENZHEN TONGCE TESTING LAB Testing location/ address: 2101 & 2201, Zhenchang Factory Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China Applicant's name ............ : ShenZhen Jumper Medical Equipment Co., Ltd Address ........................... : D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China Manufacturer's name ... : ShenZhen Jumper Medical Equipment Co., Ltd Address ........................... : D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, 518103 China Standard(s) ..................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 Product Name ................. : Body Fat Scale Trade Mark ...................... : N/A Model/Type reference..... : JPD-BFS300, JPD-BFS100, JPD-BFS710, JPD-BFS200A, JPD-BFS200B, JPD-BFS200D, JPD-BFS101, JPD-BFS102, JPD-BFS300A Rating(s).......................... : DC 4.5V (3*AAA Battery) Date of receipt of test item ......................................... : Jan. 10, 2024 Date (s) of performance of test ................................... : Jan. 10, 2024 ~ Apr. 17, 2024 Tested by (+signature) ... : Onnado YE Check by (+signature) .... : Beryl ZHAO Approved by (+signature): Tomsin General disclaimer: This report shall not be reproduced except in full, without the written approval of SHENZHEN TONGCE TESTING LAB. This document may be altered or revised by SHENZHEN TONGCE TESTING LAB personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT240110E038 Page 2 of 49 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Table of Contents 1. General Product Information .................................................................. 3 1.1. EUT description ..................................................................................................... 3 1.2. Model(s) list ............................................................................................................ 3 1.3. Operation Frequency ............................................................................................ 3 2. Test Result Summary .............................................................................. 4 3. General Information ................................................................................. 5 3.1. Test environment and mode ................................................................................. 5 3.2. Description of Support Units ................................................................................ 5 4. Facilities and Accreditations .................................................................. 6 4.1. Facilities ................................................................................................................. 6 4.2. Location ................................................................................................................. 6 4.3. Measurement Uncertainty ..................................................................................... 6 5. Test Results and Measurement Data ..................................................... 7 5.1. Antenna requirement ............................................................................................ 7 5.2. Conducted Emission ............................................................................................. 8 5.3. Conducted Output Power ..................................................................................... 9 5.4. Emission Bandwidth ........................................................................................... 10 5.5. Power Spectral Density ....................................................................................... 11 5.6. Conducted Band Edge and Spurious Emission Measurement ....................... 12 5.7. Radiated Spurious Emission Measurement ...................................................... 14 Appendix A: Test Result of Conducted Test Appendix B: Photographs of Test Setup Appendix C: Photographs of EUT Report No.: TCT240110E038 Page 3 of 49 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. General Product Information 1.1. EUT description Product Name ....................... : Body Fat Scale Model/Type reference........... : JPD-BFS300 Sample Number....................: TCT240110E038-0101 Operation Frequency ........... : 2402MHz~2480MHz Number of Channel .............. : 3 Modulation Type ................... : GFSK Antenna Type ........................ : PCB Antenna Antenna Gain ........................ : 2.6dBi Rating(s)................................ : DC 4.5V (3*AAA Battery) Note: The antenna gain listed in this report is provided by applicant, and the test laboratory is not responsible for this parameter. 1.2. Model(s) list No. Model No. Tested with 1 JPD-BFS300 Other models JPD-BFS100, JPD-BFS710, JPD-BFS200A, JPD-BFS200B, JPD-BFS200D, JPD-BFS101, JPD-BFS102, JPD-BFS300A Note: JPD-BFS300 is tested model, other models are derivative models. The models are identical in circuit and PCB layout, only different on the model names. So the test data of JPD-BFS300 can represent the remaining models. 1.3. Operation Frequency Channel Frequency Channel Frequency Channel Frequency 0 2402MHz 1 2426MHz 2 2480MHz Remark: Only the three Broadcast channel of BLE used by EUT. Report No.: TCT240110E038 Page 4 of 49 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 2. Test Result Summary Requirement CFR 47 Section…

Text truncated - open the document above for the full version.

Page 1 of 1 Appendix B: Photographs of Test Setup Product: Body Fat Scale Model: JPD-BFS300 Radiated Emission