2AE77DGU7T45A161SACar Infotainment

MOVON CORPORATION Report Number: MOV-15-RF-I063 Page : (1) of (56) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. FCC Part 15 Subpart B&C §15.247 Test Report Equipment Under Test Car Infotainment Model Name DGU-7T45-A161SA Applicant DIGEN FCC ID 2AE77DGU7T45A161SA Manufacturer DIGEN Date of Test(s) 2015. 07. 13 ~ 2015. 07. 28 Date of Issue 2015. 07. 29 In the configuration tested, the EUT complied with the standards specified above. Issue to Issue by DIGEN 89, Seongseo4chacheomdan-ro, Dalseo-gu, Daegu, 704-801, Korea Tel.: +82-70-4850-3322 Fax: +82-2-532-8811 MOVON Corporation 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea, 449-812 Tel.: +82-31-338-8837 Fax: +82-31-338-8847 MOVON CORPORATION Report Number: MOV-15-RF-I063 Page : (2) of (56) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Revision history Revision Date of issue Description Revised by -- July 29, 2015 Initial -- MOVON CORPORATION Report Number: MOV-15-RF-I063 Page : (3) of (56) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Table of contents 1. ATTESTATION OF TEST RESULTS ............................................................................. 4 2. EUT DESCRIPTION ........................................................................................................ 6 3. FREQUENCY HOPPING SYSTEM REQUIREMENTS ................................................... 7 4. TRANSMITTER RADIATED SPURIOUS EMISSIONS AND CONDUCTED SPURIOUS EMISSIONS ................................................................................................................ 10 5. 20 ㏈ BANDWIDTH MEASUREMENT ........................................................................ 34 6. MAXIMUM PEAK OUTPUT POWER MEASUREMENT ............................................... 39 7. HOPPING CHANNEL SEPARATION ........................................................................... 44 8. NUMBER OF HOPPING FREQUENCY ........................................................................ 46 9. TIME OF OCCUPANCY (DWELL TIME) ...................................................................... 48 10. ANTENNA REQUIREMENT ....................................................................................... 54 11. RF EXPOSURE EVALUATION .................................................................................. 55 MOVON CORPORATION Report Number: MOV-15-RF-I063 Page : (4) of (56) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 1. Attestation of test results 1.1. Details of applicant and manufacturer Applicant : DIGEN Address : 89, Seongseo4chacheomdan-ro, Dalseo-gu, Daegu, 704-801, Korea Contact Person : Jong-Sun, Park Telephone : +82-70-4850-3322 Fax : +82-2-532-8811 MOVON CORPORATION Report Number: MOV-15-RF-I063 Page : (6) of (56) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 2. EUT Description Kind of product Car Infotainment Model Name DGU-7T45-A161SA FCC ID 2AE77DGU7T45A161SA Serial Number N/A Power supply DC 13.5V Frequency range 2 402 ㎒ ~ 2 480 ㎒ Modulation technique GFSK, Pi/4DQPSK, 8DPSK Number of channels 79 Antenna gain -0.09㏈i (Max.) TEST SITE REGISTRATION NUMBER FCC(670686), FCC(287786) 2.1. Declarations by the manufacturer None 2.2. Details of modification None MOVON CORPORATION Report Number: MOV-15-RF-I063 Page : (7) of (56) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 3. Frequency Hopping System Requirements 3.1. Standard Applicable According to FCC Part 15.247(a)(1), The system shall hop to channel frequencies that are selected at the system hopping rate from a pseudo randomly ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. (g) Frequency hopping spread spectrum systems are not required to employ all available hopping channels during each transmission. However, the system, consisting of both the transmitter and the receiver, must be designed to comply with all of the regulations in this section should the transmitter be presented with a continuous data (or information) stream. In addition, a system employing short transmission bursts must comply with the definition of a frequency hopping system and must distribute its transmissions over the minimum number of hopping channels specified in this section. (h) The incorporation of intelligence within a frequency hopping spread spectrum system that permits the system to recognize other users within the spectrum band so that it individually and independently chooses and adapts its hopsets to avoid hopping on occupied channels is permitted. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. 3.2. EUT Pseudorandom Frequency Hopping Sequence The pseudorandom sequence may be generated in a nine-stage shift register whose 5th and 9th…

Text truncated - open the document above for the full version.