2AEEV-OBFTC-0202A3-in-1 Charging Stand

010101 3-in-1 Charging Stand OBFTC-0202-A 77-000785 / 77-000786 020202 01 3-in-1 Charging Stand OBFTC-0202-A 03 3 Input USB-C Po 1 2 3 0303 04 04 0505 https:/www.otterbox.com 117.0X81.0X139.0mm Wireless Output 1 : 25W (Max) / Qi2 MPP Wireless Output 2 : 5.0W (Max) / Qi BPP Wireless Output 3 : 5.0W (Max) /Apple Watch XXXXg Manufacturer: Company Name: Dongguan Tai Jun Electronics Co. , Ltd Address : Bldg 1, No.1 Jingye Rd, Liaobu Town, Dongguan, Guangdong 6 25 06060606060606060606060606060606 010203 0405 06 0708 WARING – Do not hang any type of accessory or accessory bracket from the plug 010203 040506 0708 FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‡5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD ‡,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU ‡&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKHUHFHLYHULV connected. ‡&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 070707070707 08 ISED Statement This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator & your body. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Déclaration d'exposition aux radiations Cetéquipementestconforme Canada limitesd'exposition aux radiations dans un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé à distance minimum de 10cm entre le radiateur et votre corps. 080808 We Protop International Inc. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http:// www.otterbox.com/ip This product can be used across EU member states without restriction. operating frequency range (the maximum transmitted power) 360KHz: -15.95dBuA/m(@10m) 326.5KHz: -14.16dBuA/m(@10m) 127.7KHz: -1.43dBuA/m(@10m) 1.778MHz: -22.28dBuA/m(@10m) 09 Apple Watch Sport(1st generation) Apple Watch Series 1 Apple Watch Series 2 Apple Watch Series 3 Apple Watch Series 4 Apple Watch Series 5 Apple Watch Series 6 Apple Watch Series 7 Apple Watch Series 8 Apple Watch Series 9 Apple Watch Series 10 Apple Watch Series 11 Apple Watch Ultra Apple Watch Ultra 2 Apple Watch Ultra 3 Apple Watch SE Apple Watch SE 2 Apple Watch SE 3 REMARK: supports fast charging for Apple Watch Ultra 3, Apple Watch Ultra 2,Apple Watc h Ultra, and Apple Watch Series 7 or later. 10 Made for

209 South Meldrum Street • Fort Collins, CO 80521 May 19, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA Re: Attestation Statements Part 2.911(d)(7) Request for (FCC ID: 2AEEV-OBFTC-0202A) To Whom It May Concern: Otter Products, LLC (“Otter”) hereby certifies and confirms that it appoints itself to act as its designated U.S. agent for service of process in connection with the above-referenced equipment authorization. Otter further acknowledges and agrees that it will maintain this designation for a period of no less than one (1) year following the termination of all marketing and importation of the subject equipment, or until the conclusion of any commission-related proceeding involving the equipment, whichever occurs later. Applicant Information: Otter Products, LLC 209 South Meldrum Street Fort Collins, Colorado 80521 Attention: Susan Pfuetze Email: [email protected] Phone: +1 (970) 492-6906 FRN: 0023105224 Product Description: 3-in-1 Charging Stand Grantee Code: 2AEEV FCC ID: 2AEEV-OBFTC-0202A Susan Pfuetze Director, Logistics and Compliance U.S. Agent Information: Otter Products, LLC 209 South Meldrum Street Fort Collins, Colorado 80521 Attention: Susan Pfuetze Email: [email protected] Phone: +1 (970) 492-6906 FRN: 0023105224 Product Description: 3-in-1 Charging Stand Susan Pfuetze Director, Logistics and Compliance Otter Products, LLC 


        

209 South Meldrum Street • Fort Collins, CO 80521 ATTESTATION STATEMENT March 23, 2026 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Re: Attestation Statements 47 C.F.R. § 2.911(d)(5)(i) Request for FCC ID: 2AEEV-OBFTC-0202A To Whom It May Concern: Otter Products, LLC (the “Applicant”) hereby certifies that the equipment for which authorization is sought is not “covered” equipment that is prohibited from receiving an equipment authorization pursuant to Section 2.903 of the Federal Communications Commission’s (“Commission”) rules. The Applicant further certifies that, as of the date of submission of the application, the equipment does not include, incorporate, or utilize any cybersecurity or anti-virus software, firmware, or services provided by Kaspersky Lab, Inc., or any of its successors or assignees, which entities are identified on the Commission’s Covered List. These certifications are made in good faith based on the Applicant’s reasonable diligence and knowledge as of the filing date. Regards, Signature: ____________________________________ Name: Susan Pfuetze Title: Director, Logistics and Compliance Date: _______________________________________ Address: 209 Meldrum Street Fort Collins, CO 80521 US Docusign Envelope ID: 3C6BB1CE-F373-8CDF-80D6-2D382AC026E4 6/11/2026 209 South Meldrum Street • Fort Collins, CO 80521 ATTESTATION STATEMENT March 23, 2026 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Re: Attestation Statements 47 C.F.R. § 2.911(d)(5)(ii) Request for FCC ID: 2AEEV-OBFTC- 0202A To Whom It May Concern: Otter Products, LLC (the “Applicant”) hereby certifies that, as of the date of filing, the Applicant is not identified on the Federal Communications Commission’s Covered List as an entity producing “covered” equipment. This certification is made in good faith based on the Applicant’s reasonable diligence and knowledge as of the filing date. Regards, Signature: ____________________________________ Name: Susan Pfuetze Title: Director, Logistics and Compliance Date: _______________________________________ Address: 209 Meldrum Street Fort Collins, CO 80521 US Docusign Envelope ID: 3C6BB1CE-F373-8CDF-80D6-2D382AC026E4 6/11/2026

209 South Meldrum Street • Fort Collins, CO 80521 May 12, 2026 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Re: Confidentiality Request For (3-in-1 Charging Stand, Model: OBFTC-0202-A, 77- 000785, 77-000786 / FCC ID: 2AEEV-OBFTC-0202A) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block diagram, Operational description, Schematics) required to be submitted with this application be withheld from public review permanently. These documents contain detailed system and equipment description and related information about the product which Otter Products, LLC (“Otter”) considers to be proprietary, confidential, and a custom design that would not be released to the general public. Furthermore, the related information is a basis from which future technological products will evolve, and Otter considers this information beneficial to its competitors. Disclosure of the information in these documents would give competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Susan Pfuetze Director, Logistics and Compliance 


        

209 South Meldrum Street • Fort Collins, CO 80521 AUTHORIZATION LETTER March 23, 2026 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Re: Product Name: 3-in-1 Charging Stand Trademark: OTTERBOX Model Number(s): OBFTC-0202-A, 77-000785, 77-000786 To Whom It May Concern: We, the undersigned, hereby authorize Cerpass Technology Corporation Test Laboratory (“Cerpass”) to represent Otter Products, LLC (“Otter Products”) solely for the purposes of testing, certification, and obtaining regulatory approval for the product referenced above. This authorization is limited to submitting information and documentation, and communicating with applicable regulatory agencies, based exclusively on information provided or expressly approved in writing by Otter Products. Cerpass is authorized to discuss technical or procedural issues arising in connection with such certification or approval applications, as required by the applicable regulatory authorities. Cerpass shall perform all activities pursuant to this authorization in full compliance with all applicable laws, regulations, and regulatory agency requirements. Cerpass will not make any representations, certifications, or commitments on Otter Products’s behalf that are inaccurate, misleading, unauthorized, or inconsistent with information approved by Otter Products. Any actions taken by Cerpass within the scope of this authorization shall have the same effect as actions taken by Otter Products; provided, however, nothing in this letter shall be deemed to create a general agency, partnership, or joint venture relationship, nor shall Cerpass have authority to bind Otter Products except as expressly set forth in this letter. This authorization shall remain valid unless and until revoked in writing by Otter Products. Regards, Signature: ____________________________________ Name: Susan Pfuetze Title: Director, Logistics and Compliance Date: _______________________________________ Address: 209 Meldrum Street Fort Collins, CO 80521 USA Docusign Envelope ID: CE164147-4C51-8DC0-8299-2F3436150EC4 6/11/2026

209 South Meldrum Street • Fort Collins, CO 80521 DECLARATION OF SIMILARITY FOR 3-IN-1 CHARGING STAND April 1, 2026 To Whom It May Concern: To the best of our knowledge as of the date of this letter, Otter Products, LLC confirms the Otter SKU Number(s) and the device Regulatory Model Number (RMN) listed in Table 1 below are identical with respect to electrical safety, battery, and electromagnetic characteristics. The devices listed below are manufactured using identical materials and manufacturing processes. Product name: 3-in-1 Charging Stand Model name: OBFTC-0202-A, 77-000785, 77-000786 FCC ID: 2AEEV-OBFTC-0202A Table 1: Product Description Otter SKU Number RMN 3-in-1 CHARGING STAND BLACK 77-000785 OBFTC-0202-A 3-in-1 CHARGING STAND WHITE 77-000786 OBFTC-0202-A Regards, ____________________________________ Susan Pfuetze Director, Logistics and Compliance Otter Products, LLC Docusign Envelope ID: DC11DE19-137D-82C1-8118-EB824A1DE7C1

CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 1 of 10 EXTERNAL PHOTOGRAPHS OF EUT 1) EUT Photo White 2) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 2 of 10 3) EUT Photo 4) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 3 of 10 5) EUT Photo 6) EUT Photo Label Location CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 4 of 10 7) EUT Photo 8) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 5 of 10 9) EUT Photo 10) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 6 of 10 11) EUT Photo Black 12) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 7 of 10 13) EUT Photo 14) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 8 of 10 15) EUT Photo 16) EUT Photo Label Location CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 9 of 10 17) EUT Photo 18) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 10 of 10 19) EUT Photo 20) EUT Photo

2026/03/18 OBFTC-0202-A OBFTC-0202-A_Laser_A0_20260318 6.2 3.3 35.40 50.40 81.3 113.9 2 05 205 3-in-1 Charging Stand Model Number:OBFTC-0202-A Power Input: 15.0V 3.0A, 45.0W MAX Wireless Output 1: 25.0W (MAX)/ Qi2 MPP Wireless Output 2: 5.0W (MAX)/ Qi BPP Wireless Output 3: 5.0W (MAX)/ Apple Watch Made in Vietnam FCC ID:2AEEV-OBFTC-0202A IC:20048-0202A HVIN: OBFTC0202A Patents: www.otterbox/ip 6.2 XX X XX X CONFORMS TO UL STD 62368-1 CERTIFIED TO CSA STD C22.2 NO. 62368-1

CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 1 of 8 INTERNAL PHOTOGRAPHS OF EUT 1) EUT Photo 2) EUT Photo WPC Coil for Wireless Output 2 WPC Coil for Wireless Output 3 WPC Coil for Wireless Output 1 CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 2 of 8 3) EUT Photo 4) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 3 of 8 5) EUT Photo 6) EUT Photo RF Chip for Wireless Output 2 CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 4 of 8 7) EUT Photo 8) EUT Photo RF Chip for Wireless Output 1 CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 5 of 8 9) EUT Photo 10) EUT Photo RF Chip for Wireless Output 3 CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 6 of 8 11) EUT Photo 12) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 7 of 8 13) EUT Photo 14) EUT Photo CERPASS TECHNOLOGY CORP. Report No.: 25040556 CERPASS TECHNOLOGY CORP. Issued date : Mar. 05, 2026 Page No. : 8 of 8 15) EUT Photo 16) EUT Photo

CERPASS TECHNOLOGY CORP. Report No.: 25040556-DRFCC01 Cerpass Technology Corp. Issued Date : Mar. 05, 2026 D-FD-514-0 V1.1 Page No. : 1 of 14 RF Exposure Report Applicant : Otter Products, LLC. Address : 209 South Meldrum, Fort Collins, Colorado, CO 80521, United States Manufacturer : Protop International Inc. Address : 10F-8, No.237, Sec.,1, Datong Rd.,Xizhi Dist., New Taipei City 22161, Taiwan Factory : SOHAN VIETNAM TECHNOLOGY CO.,LTD Address : Lot No. 17 A-2 Que Vo 3industrial Park-Phu Luong Commune – Que Vo District Bac Ninh Province, Vietnam Equipment : 3-in-1 Charging Stand Model No. : OBFTC-0202-A, 77-000785, 77-000786 Trade Name : OTTERBOX Date of Sample Receipt : Feb. 06, 2026 Date(s) of Test : Mar. 02, 2026~Mar. 03, 2026 FCC ID : 2AEEV-OBFTC-0202A Standard : FCC CFR 47 part1, 1.1310 KDB680106 D01v04 I HEREBY CERTIFY THAT: The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Leevin Li / Supervisor CERPASS TECHNOLOGY CORP. Report No.: 25040556-DRFCC01 Cerpass Technology Corp. Issued Date : Mar. 05, 2026 D-FD-514-0 V1.1 Page No. : 2 of 14 CONTENTS 1. Test Configuration of Equipment under Test ........................................................................................... 4 1.1. Feature of Equipment under Test .............................................................................................................. 4 1.2. Test Mode and Test Software .................................................................................................................... 4 1.3. Description of Test System........................................................................................................................ 6 1.4. General Information of Test ....................................................................................................................... 7 1.5. Measurement Uncertainty ......................................................................................................................... 7 2. Summary Of Standards And Results ........................................................................................................ 8 2.1. Measuring Standard .................................................................................................................................. 8 2.2. Duty cycle .................................................................................................................................................. 8 2.3. Typical test Setup .................................................................................................................................... 10 2.4. Specification Limits ................................................................................................................................. 10 2.5. Test Equipment List and Details .............................................................................................................. 11 2.6. Test Result .............................................................................................................................................. 11 2.7. Photographs of test setup ....................................................................................................................... 14 CERPASS TECHNOLOGY CORP. Report No.: 25040556-DRFCC01 Cerpass Technology Corp. Issued Date : Mar. 05, 2026 D-FD-514-0 V1.1 Page No. : 3 of 14 History of this test report Version No. Report No Date Description Rev.01 25040556-DRFCC01 Mar. 05, 2026 Initial Issue CERPASS TECHNOLOGY CORP. Report No.: 25040556-DRFCC01 Cerpass Technology Corp. Issued Date : Mar. 05, 2026 D-FD-514-0 V1.1 Page No. : 4 of 14 1. Test Configuration of Equipment under Test 1.1. Feature of Equipment under Test Product 3-in-1 Charging Stand Model No. OBFTC-0202-A, 77-000785, 77-000786 Model Discrepancy All models are identical to each other except the model name and appearance color. OBFTC-0202-A is the representative for the final test. Frequency Range Wireless Output 1: BPP: 120~148.5kHz; MPP: 360kHz Wireless Output 2: 111~147kHz Wireless Output 3 (Apple Watch): 326.5kHz and 1.778MHz Modulation Type Wireless Output 1: ASK Wireless Output 2: ASK Wireless Output 3: ASK Antenna Type Coil Antenna Power Rating Power Input: 15.0V3.0A, 45.0W MAX Wireless Output 1: 10.0W (MAX)/BPP; 25.0W (MAX)/MPP Wireless Output 2: 5.0W (MAX)/Qi BPP Wireless Output 3: 5.0W (MAX)/Apple Watch Temperature Operating Temp: 0°C~+25°C Storage Temp: -20°C~+60°C Note: For more details, please refer to the User’s manual of the EUT. 1.2. Test Mode and Test Software Test Mode Operating Description Mode 1 Wireless Charging for Wireless 1(Standby mode) +Wireless 2(Standby mode) + Wireless 3(Standby mode) Mode 2 Wireless Charging for Wireless 1(25W for Wireless Load, Operating @360kHz) +Wireless 2(5W for Wireless Load, Operating @111~147kHz) +Wireless 3(5W for Apple watch 3, Operating @326.5kHz) Mode 3 Wireless Charging for Wireless 1(25W for Wireless Load, Operating @360kHz) +Wireless 2(5W for Wireless Load, Operating @111~147kHz) +Wireless 3(5W for Apple watch 7, Operating @1.778MHz) Mode 4 Wireless Charging for Wireless 1(10W for Wireless Load, Operating @120~148.5kHz) +Wireless 2(5W for Wireless Load, Operating @111~147kHz) +Wireless 3(5W for Apple watch 3, Operating @326.5kHz) Mode 5 Wireless Charging for Wireless 1(25W for Wireless Load, Operating @360kHz) +Wireless 2(5W for Wireless Load, Operating @111~147kHz) +Wireless 3(5W for Apple watch 3, Operating @326.5kHz) Worst test Mode Mode 1 Wireless Charging for Wireless 1(Standby mode) +Wireless 2(Standby mode) + Wireless 3(Standby mode) Mode 2 Wireless Charging for Wireless 1(25W for Wireless Load, Operating @360kHz) +Wireless 2(5W for Wireless Load, Operating @111~147kHz) +Wireless 3(5W for Apple watch 3, Operating @326.5kHz) Mode 4 Wireless Charging for Wireless 1(10W for Wireless Load,…

Text truncated - open the document above for the full version.

东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD1 规格承认书 SpecificationforApproval 供应商确认 SupplierApprove 客户确认 CustomerApprove 拟制 Preparedby 审核 Checkedby 批准 Approvalby 杨茂新罗杰罗银宾 客户： Customer： 客户料号： CustomerPartNo.： TNU328MPPCOIL 供应商： Supplier： 东莞市吉欧电子科技有限公司 规格描述： Specdescription： Φ42.9*5.2*0.8/Φ19.5*0.720.08*65*11TS8.4uh 供应商料号： SupplierPartNo.： J-FDTNU328MPPCOIL 日期： Date： 2026/3/4 版本： Version： A.0 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD2 版本变更履历 VersionChangeHistory 版本记录 Revision 变更前 Beforechange 变更后 Afterchange 变更日期 Date 批准 Approvalby A.0—— 新发行（ InitialRelease ） 2026/3/4 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD3 1.尺寸规格Dimensionspecification 制程要求： 1.线圈引线不贴高温胶带平行出线； 2.隔磁片的规格为：Φ42.9*5.2*0.72双槽/Φ19.5*0.72; 3.隔磁片背面贴PET+导电布：Φ41.3*0.15带手撕位; 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD4 2.原理图Schematicdiagram 3.电器特性Electroniccharacter 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 项目 TIEM 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS IND8.1UH±5%100KHZ/1.0V LCRMETRTH2830N DCR70mΩMax\ PH2511S Q60Min100KHZ/1.0V LCRMETRTH2830N OperatingTemperatureandHumindity/工 作温度和湿度 -30°C~80°C/30%~90% StorageTemperatureandHumindity/存储 温度和湿度 -40°C~90°C/30%~90% 4.线圈参数Coilspecification 圈数 Turns 线径 WireDia. 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/Anti Paste 11T S 0.08*65P 热风绞线 (Hot-Wire) 密绕 （Close） 逆时针 (C.C.W.) 相交 （Yes） 反贴 (Anti/-Paste) 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD5 5.材料清单Billofmaterials 6.包装PACKONG 序号 number 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 1 线材 0.08*65P自粘热风绞线 2 硬磁片 大：Φ42.9*5.2*0.72H(槽) 小：Φ19.5*0.72直槽 3 粘和剂JS-E103（加稠）白胶 4 双面胶 PET+导电布：Φ41.3*0.15 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD6 6.1 包装图片 Packingpicture 6.2 包装数量及规格 Packingquantity 项目Item数量Quantity材料规格Material 盒Box 320PCS37*27*5.0CM 箱子BigCarton 1280PCS39.5*28*25.5CM 6.3包装以现有包装盒为参照标准，以实际出货包装为准，如有特殊需求可以定 制。 Thepackagingshallbebasedontheexistingpackingplateandtheactual deliverypackageshallprevail.Ifthereisanyrequirement,wecancustomizeit.

东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD1 规格承认书 SpecificationforApproval 供应商确认 SupplierApprove 客户确认 CustomerApprove 拟制 Preparedby 审核 Checkedby 批准 Approvalby 杨茂新罗杰罗银宾 客户： Customer： 客户料号： CustomerPartNo.： TOT3IN1OTCL 供应商： Supplier： 东莞市吉欧电子科技有限公司 规格描述： Specdescription： Φ50*5.3*1.00.08*105P10TS6.3UH 供应商料号： SupplierPartNo.： J-FDTOT3IN1OTCL 日期： Date： 2026/3/4 版本： Version： A.0 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD2 版本变更履历 VersionChangeHistory 版本记录 Revision 变更前 Beforechange 变更后 Afterchange 变更日期 Date 批准 Approvalby A.0—— 新发行（ InitialRelease ） 2026/3/4 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD3 1.尺寸规格Dimensionspecification 制程要求： 1.线圈引线贴8MM高温胶带交叉出线， 2.隔磁片的规格为：Φ50*5.3*1.0, 3.隔磁片背面贴泡棉双面胶Φ48*0.2带手撕位. 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD4 2.原理图Schematicdiagram 3.电器特性Electroniccharacter 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 项目 TIEM 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS IND6.3UH±5%100KHZ/1.0V LCRMETRTH2830N DCR45mΩMax\ PH2511S Q80Min100KHZ/1.0V LCRMETRTH2830N OperatingTemperatureandHumindity/工 作温度和湿度 -30°C~80°C/30%~90% StorageTemperatureandHumindity/存储 温度和湿度 -40°C~90°C/30%~90% 4.线圈参数Coilspecification 圈数 Turns 线径 WireDia. 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/Anti Paste 10T S 0.08*105P 丝包绞线 (Ustc-Wire) 密绕 （Close） 逆时针 (C.C.W.) 相交 （Yes） 反贴 (Anti/-Paste) 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD5 5.材料清单Billofmaterials 6.包装PACKONG 序号 number 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 1 线材 0.08*105P丝包线 2 隔磁片 Φ50*5.3*1.0H(双槽) 3 粘和剂JS-E103（加稠）白胶 4 泡棉双面胶 Φ48*0.2 东莞市吉欧电子科技有限公司 DongGuanJiouElectronicTechnologyco.,LTD6 6.1 包装图片 Packingpicture 6.2 包装数量及规格 Packingquantity 项目Item数量Quantity材料规格Material 盒Box 320PCS37*27*5.0CM 箱子BigCarton 1280PCS39.5*28*25.5CM 6.3包装以现有包装盒为参照标准，以实际出货包装为准，如有特殊需求可以定 制。 Thepackagingshallbebasedontheexistingpackingplateandtheactual deliverypackageshallprevail.Ifthereisanyrequirement,wecancustomizeit.

CERPASS TECHNOLOGY CORP. Report No.: 25040556-DRFCC02 Cerpass Technology Corp. Issued Date : Mar. 05, 2026 D-FD-514-0 V1.1 Page No. : 1 of 32 FCC RADIO TEST REPORT Applicant : Otter Products, LLC. Address : 209 South Meldrum, Fort Collins, Colorado, CO 80521, United States Manufacturer : Protop International Inc. Address : 10F-8, No.237, Sec.,1, Datong Rd.,Xizhi Dist., New Taipei City 22161, Taiwan Factory : SOHAN VIETNAM TECHNOLOGY CO.,LTD Address : Lot No. 17 A-2 Que Vo 3industrial Park-Phu Luong Commune – Que Vo District Bac Ninh Province, Vietnam Equipment : 3-in-1 Charging Stand Model No. : OBFTC-0202-A, 77-000785, 77-000786 Trademark : OTTERBOX Date of Sample Receipt : Feb. 06, 2026 Date(s) of Test : Mar. 02, 2026~Mar. 03, 2026 FCC ID : 2AEEV-OBFTC-0202A I HEREBY CERTIFY THAT: The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Leevin Li / Supervisor CERPASS TECHNOLOGY CORP. Report No.: 25040556-DRFCC02 Cerpass Technology Corp. Issued Date : Mar. 05, 2026 D-FD-514-0 V1.1 Page No. : 2 of 32 Contents 1. Report of Measurements and Examinations .................................................................................... 4 1.1 List of Measurements and Examinations ................................................................................... 4 2. Test Configuration of Equipment under Test ................................................................................... 5 2.1 Feature of Equipment under Test ............................................................................................... 5 2.2 Description of the test mode ...................................................................................................... 6 2.3 Description of Test System ......................................................................................................... 8 2.4 General Information of Test ........................................................................................................ 9 2.5 Measurement Uncertainty .......................................................................................................... 9 3. Test Equipment and Ancillaries Used for Tests ............................................................................. 10 4. Antenna Requirements ..................................................................................................................... 11 4.1 Standard Applicable ................................................................................................................. 11 4.2 Antenna Construction ............................................................................................................... 11 4.3 Result ....................................................................................................................................... 11 5. Test of Conducted Emission ............................................................................................................ 12 5.1 Test Limit .................................................................................................................................. 12 5.2 Test Procedures ....................................................................................................................... 12 5.3 Typical Test Setup .................................................................................................................... 13 5.4 Test Result and Data ...............................................................…

Text truncated - open the document above for the full version.