2AEEV-OBFTC0152AWIRELESS POWER BANK DIVISION 2, 5K mAh

Otter Products LLC Page 1 of 13 TR2305006-001, Rev 1 POWER BANK Quick Start Guide Fully charge for first use While charging display continually shows (Fig. 1): • 1 flashing LED – < 25% capacity • 1 solid LED, 1 flashing LED – 25-50% capacity • 2 solid LEDs, 1 flashing LED – 50-75% capacity • 3 solid LEDs, 1 flashing LED – 75-99% capacity • 4 solid LEDs – 100% capacity When not charging, press button to view capacity (Fig. 2): • No LEDs – 0% capacity • 1 flashing LED – 0-10% capacity • 1 solid LED – 10-25% capacity • 2 solid LEDs – 25-50% capacity • 3 solid LEDs – 50-75% capacity • 4 solid LEDs – 75-100% capacity WIRELESSLY CHARGE DEVICES (If applicable) Press button and place your device flat on the side of the Power bank featuring the OtterBox logo. An orange light blinks while detecting your device and stops blinking if the device is not detected. The orange light blinks when a device is connected and charging. CHARGE DEVICES Power bank automatically starts charging most devices. Care & Maintenance Cleaning 1. Wipe with a dry cloth. 2. Do not use solvents, chemicals, cleaning solutions, alcohol, ammonia or abrasives. CUSTOMER SERVICE 1-855-688-7269 USA + Canada - Toll Free [email protected] otterbox.com/support This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Otter Products LLC Page 2 of 13 TR2305006-001, Rev 1 CHARGEUR PORTATIF GUIDE DE DÉMARRAGE RAPIDE Charge complète pour une première utilisation Pendant la recharge, l’écran affiche en permanence (illustration nº 1) : • 1 voyant DEL clignotant – < 25 % de capacité • 1 voyant DEL allumé en continu, 1 voyant DEL clignotant – capacité de 25-50 % • 2 voyants DEL allumés en continu, 1 voyant DEL clignotant – capacité de 50-75 % • 3 voyants DEL allumés en continu, 1 voyant DEL clignotant – capacité de 75-99 % • 4 voyants DEL allumés en continu – capacité de 100 % Lorsque la batterie n’est pas en cours de charge, appuyez sur le bouton pour afficher la capacité (illustration n°2) : • Aucun voyant DEL allumé – capacité de 0 % • 1 voyant DEL clignotant – capacité de 0-10 % • 1 voyant DEL allumé en continu – capacité de 10-25 % • 2 voyants DEL allumés en continu – capacité de 25-50 % • 3 voyants DEL allumés en continu – capacité de 50-75 % • 4 voyants DEL allumés en continu – capacité de 75-100 % DISPOSITIFS DE CHARGE SANS FIL (si applicable) Appuyez sur le bouton et placez votre appareil à plat sur le côté du chargeur portatif arborant le logo OtterBox. Un voyant orange clignote pour détecter votre appareil et cesse de clignoter si l’appareil n’est pas détecté. Le voyant orange clignote lorsqu’un appareil est connecté et en cours de charge. APPAREILS CHARGÉS Le chargeur portatif commence automatiquement à charger la plupart des appareils. Entretien Nettoyage 1. Essuyez avec un chiffon sec. 2. N’utilisez pas de solvants, de produits chimiques, de solutions de nettoyage, d’alcool, d’ammoniaque ou de composants abrasifs. SERVICE CLIENT 1-855-688-7269 Numéro gratuit aux États-Unis et au Canada [email protected] otterbox.com/support Cet appareil est conforme à la section 15 des réglementations de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences nuisibles, et (2) cet appareil doit accepter toute autre interférence reçue, notamment les interférences susceptibles d’occasionner un fonctionnement indésirable.. Otter Products LLC Page 3 of 13 TR2305006-001, Rev 1 POWERBANK SCHNELLSTARTANLEITUNG Vor dem ersten Gebrauch vollständig aufladen Während des Ladevorgangs wird auf der Anzeige Folgendes angezeigt (Abb. 1): • 1 blinkende LED – < 25 % Kapazität • 1 durchgehend leuchtende LED, 1 blinkende LED – 25–50 % Kapazität • 2 durchgehend leuchtende LEDs, 1 blinkende LED – 50–75 % Kapazität • 3 durchgehend leuchtende LEDs, 1 blinkende LED – 75–99 % Kapazität • 4 durchgehend leuchtende LEDs – 100 % Kapazität Wenn das Gerät nicht aufgeladen wird, drücken Sie die Taste, um die Kapazität anzuzeigen (Abb. 2): • Keine LEDs – 0 % Kapazität • 1 blinkende LED – 0–10 % Kapazität • 1 durchgehend leuchtende LED – 10–25 % Kapazität • 2 durchgehend leuchtende LEDs – 25–50 % Kapazität • 3 durchgehend leuchtende LEDs – 50–75 % Kapazität • 4 durchgehend leuchtende LEDs – 75–100 % Kapazität GERÄTE DRAHTLOS AUFLADEN (ggf.) Drücken Sie die Taste und legen Sie Ihr Gerät flach auf die Seite der Powerbank mit dem OtterBox-Logo. Ein orangefarbenes Licht blinkt, während Ihr Gerät gesucht wird, und hört auf zu blinken, wenn Ihr Gerät nicht gefunden wurde. Das orangefarbene Licht blinkt, wenn ein Gerät angeschlossen ist und aufgeladen wird. GERÄTE AUFLADEN Die Powerbank startet den Ladevorgang bei den meisten Geräten automatisch. Pflege und Wartung Reinigung 1. Mit einem trockenen Tuch reinigen. 2. Keine Lösungsmittel, Chemikalien, Reinigungslösungen, Alkohol, Ammoniak oder Scheuermittel verwenden. KUNDENSERVICE 1-855-688-7269 USA + Kanada – gebührenfrei [email protected] otterbox.de/support Dieses Gerät entspricht Teil 15 der FCC-Regeln. Der Betrieb unterliegt den folgenden beiden Bedingungen: 1) Das Gerät darf keine gefährlichen Interferenzen verursachen. 2) Das Gerät muss jede empfangene Interferenz akzeptieren, auch solche Interferenzen, die unerwünschten Betrieb verursachen können. Otter Products LLC Page 4 of 13 TR2305006-001, Rev 1 POWER BANK GUIDA RAPIDA Caricare completamente per il primo utilizzo Durante la carica, sul display viene visualizzato quanto segue (fig. 1): • 1 LED lampeggiante – < 25% della capacità • 1 LED illuminato, 1 LED lampeggiante – 25-50% della capacità • 2 LED illuminati, 1 LED lampeggiante – 50-75% della capacità • 3 LED illuminati, 1 LED lampeggiante – 75-99% della capacità • 4 LED illuminati – 100% della capacità Quando il dispositivo non è in car…

Text truncated - open the document above for the full version.

WIRELESS POWER BANK DIVISION 2, 5K mAh OBFTC-0152-A United States: FCC Compliance: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. FCC RF EXPOSURE COMPLIANCE: This certified solution complies with the FCC portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in the User manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. WIRELESS POWER BANK DIVISION 2, 5K mAh OBFTC-0152-A Canada: ISED COMPLIANCE STATEMENT: This Certified Solution contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation of the Certified Solution is subject to the following two conditions: (1) This Certified Solution may not cause interference; and (2) This Certified Solution must accept any interference, including interference that may cause undesired operation of the Certified Solution. DÉCLARATION DE CONFORMITÉ D’ISDE : Cette solution Certifiée contient un ou des émetteurs/récepteurs exempts de licence conformes aux RSS exempts de licence d'Innovation, Sciences et Développement économique Canada. Le fonctionnement de la Solution certifiée est soumis aux deux conditions suivantes : (1) Cette Solution Certifiée ne doit pas provoquer d'interférences ; et (2) Cette Solution Certifiée doit accepter toute interférence, y compris les interferences susceptibles d'entraîner un fonctionnement indésirable de la Solution Certifiée. IC RF EXPOSURE COMPLIANCE: The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in the user manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans le manuel de l’utilisateur. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. Verified Energy Performance: WIRELESS POWER BANK DIVISION 2, 5K mAh OBFTC-0152-A IMPORTANT SAFETY INSTRUCTIONS 1.Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, submerge in a liquid, or insert foreign objects into the power bank. 2.Keep power banks out of the reach of children. Children should be supervised when a power bank is in use. 3.Do not expose power banks to heat or fire. 4.Do not store in direct sunlight or in a vehicle. 5.Do not use or charge a damaged power bank. 6.In the event of a power bank leaking, keep away from skin and eyes. Wash any affected area with lar ge amounts of water and seek medical attention. 7.Po wer banks need to be charged before use. Always use the correct cable and refer to the power bank manufacturer’s instructions for proper charging instructions. Do not use any cable other than that specifically provided or recommended by the power bank manufacturer. Do not use a damaged cable to charge or discharge a power bank. 8.Do not leave a power bank on prolonged charge when not in use. Disconnect the power bank from t he charging source once full. 9.Ob serve the dedicated input and output ports for receiving and providing power on the power bank and the device to be charged to ensure correct use. 10.Do not use any power bank which is not designed for use with the device you wish to charge. Refer to the device’s manual for proper charging instructions. 11.When possible, detach cable(s) from power bank when not in use. 12.Only use the power bank in the application for which it was intended. 13.Store the power bank in a cool, dry place when not in use. 14.When a power bank is not used for prolonged periods, the power bank should be charged periodically in order to maintain power bank life. 15.Dispose of power bank properly. Keep all instructions provided with the power bank for future reference.

Attestation Statements (2024/6/21) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2AEEV-OBFTC0152A) (Otter Products, LLC.), the undersigned, hereby authorize Otter Products, LLC. to act as our designated U.S. agent for service of process, (Otter Products, LLC.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Otter Products, LLC. accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company Name: Otter Products, LLC. Address: 209 South Meldrum, Fort Collins, Colorado 80521, United States Contact Name: Susan Pfuetze FRN: 0023105224 Telephone No: (970) 980-2092 Email: [email protected] Signature [Susan Pfuetze] U.S. Agent Information: Company Name: Otter Products, LLC. Address: 209 South Meldrum, Fort Collins, Colorado 80521, United States Contact Name: Susan Pfuetze FRN: 0023105224 Telephone No: (970) 980-2092 Email: [email protected] Signature [Susan Pfuetze]

(Otter Products, LLC.) (2024.6.21) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2AEEV-OBFTC0152A) [Otter Products, LLC.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. (Otter Products, LLC.) (2024.6.21) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2AEEV-OBFTC0152A) [Otter Products, LLC.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment.

June 27, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: Letter of Agent Authorization To Whom It May Concern: The undersigned, on behalf of Otter Products, LLC (“Company”), hereby authorizes Shenzhen BCTC Testing Co., Ltd (“Supplier”) to act on Company’s behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. The undersigned, on behalf of Company, also hereby certifies that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). The authorization granted in this letter is subject to revocation, cancellation, and termination by Company upon written notice at any time to Supplier. This letter will expire on August 15, 2024, unless earlier revoked, cancelled, or terminated by Company. Sincerely, Susan Pfuetze Senior Manager Compliance Otter Products, LLC 209 South Meldrum Street Fort Collins, CO 80521 Phone: +1 (970) 492-6906 Email: [email protected] DocuSign Envelope ID: 602DB998-645D-4341-A87D-5B2446385329

June 14, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: Confidentiality Request for EUT NAME: WIRELESS POWER BANK DIVISION 2, 5K mAh, Trademark: OTTERBOX; MODEL: OBFTC-0152-A; FCC ID: 2AEEV- OBFTC0152A To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the block diagram, schematics, and operational description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Susan Pfuetze Senior Manager Compliance Otter Products, LLC 209 South Meldrum Street Fort Collins, CO 80521 Phone: +1 (970) 492-6906 Email: [email protected] DocuSign Envelope ID: 78638646-BE95-4BD6-A0FA-E62089E6CAB7

External Photos

IC: 20048-OBFTC0152A FCC ID: 2AEEV-OBFTC0152A CAN ICES-003(B)/nmb-003(B) Model No.: OBFTC-0152-A Lithium Cell Rated:5000mAh, 3.8Vdc, 19Wh SN:XXXXXXX Patents:www.otterbox.com/ip Made in China Input Wireless: 5W Max, Output Wireless: 7.5W Max. LPS 1ICP8/57/72 CI D2 Grps ABCD CII D2 Grps FG CIII D1 -20°C ≤ Tamb ≤ 45°C Temperature Code: T5 Wireless Power Bank Division 2, 5K mAh TESSERACT laser marking

Internal Photos TX Antenna RX Antenna

No.：BCTC/RF-EMC-005 Page 1 of 14 Edition：B.1 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2403276489-2E Applicant: Otter Products, LLC. Product Name: WIRELESS POWER BANK DIVISION 2, 5K mAh Test Model: OBFTC-0152-A Tested Date: 2024-03-14 to 2024-04-01 Issued Date: 2024-04-01 Report No.: BCTC2403276489-2E No.：BCTC/RF-EMC-005 Page 2 of 14 Edition：B.1 FCC ID: 2AEEV-OBFTC0152A The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: WIRELESS POWER BANK DIVISION 2, 5K mAh Trademark: OTTERBOX Model/Type Reference: OBFTC-0152-A Prepared For: Otter Products, LLC. Address: 209 South Meldrum, Fort Collins, Colorado 80521, United States Manufacturer: Otter Products, LLC. Address: 209 South Meldrum, Fort Collins, Colorado 80521, United States Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-03-14 Sample Tested Date: 2024-03-14 to 2024-04-01 Issue Date: 2024-04-01 Report No.: BCTC2403276489-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2403276489-2E No.：BCTC/RF-EMC-005 Page 3 of 14 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 5 3. Test Facility And Test Instrument Used ................................................................. 6 3.1 Test Facility ........................................................................................................... 6 3.2 Test Instrument Used ............................................................................................ 6 4. Method Of Measurement ....................................................................................... 7 4.1 Applicable Standard .............................................................................................. 7 4.2 Block Diagram Of Test Setup ................................................................................ 7 4.3 Limit ...................................................................................................................... 8 4.4 Test procedure ...................................................................................................... 8 4.5 Equipment Approval Considerations ..................................................................... 9 4.6 E and H field Strength ......................................................................................... 10 5. Photographs Of Test Set-Up ............................................................................... 13 (Note: N/A Means Not Applicable) Report No.: BCTC2403276489-2E No.：BCTC/RF-EMC-005 Page 4 of 14 Edition：B.1 1. Version Report No. Issue Date Description Approved BCTC2403276489-2E 2024-04-01 Original Valid Report No.: BCTC2403276489-2E No.：BCTC/RF-EMC-005 Page 5 of 14 Edition：B.1 2. Product Information 2.1 Product Information Model/Type Reference: OBFTC-0152-A Model Differences: N/A Hardware Version: N/A Software Version: N/A Operation Frequency: 111kHz-148kHz Modulation: ASK Antenna installation: coil antenna Ratings: Battery: DC 3.8V Wireless charging Output: 5W/7.5W 2.2 Support Equipment No. Device Type Brand Model Series No. Note E-1 WIRELESS POWER BANK DIVISION 2, 5K mAh OTTERBOX OBFTC-0152-A N/A EUT E-2 Dummy load N/A DL01 N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 2.3 Test Mode DC Mode Mode 1 Wireless Charging (Full load) Mode 2 Wireless Charging (Half load) Mode 3 Wireless Charging (Null load) Note: All test mode were tested and passed, only shows the worst case mode which were recorded in this report. Report No.: BCTC2403276489-2E No.：BCTC/RF-EMC-005 Page 6 of 14 Edition：B.1 3. Test Facility And Test Instrument Used 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address:1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. The site and apparatus are constructed in conformance with the requirements of ANSI C63.4 and CISPR 16-1-1 other equivalent standards. FCC Test Firm Registration Number: 712850 A2LA certificate registration number is: CN1212 ISED Registered No.: 23583 ISED CAB identifier: CN0017 3.2 Test Instrument Used EMF Test Equipment Manufacturer Model# Serial# Last Cal. Next Cal. Electromagnet -ic radiation tester Wavecontrol SMP160 19SN0980 May 15, 2023 May 14, 2024 Electromagnet -ic field probe Wavecontrol WP400-3 20WP120082 Sept. 26, 2023 Sept. 25, 2024 Software Frad EZ-EMC EMC-CON 3A1 \ \ Report No.: BCTC2403276489-2E No.：BCTC/RF-EMC-005 Page 7 of 14 Edition：B.1 4. Method Of Measurement 4.1 Applicable Standard According to §1.1307(b)(1), systems opera…

Text truncated - open the document above for the full version.

Page1 of 4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATIONFORAPPROVAL CUSTOMER: SZ003 CUSTP/N:1031.00285 FINEP/N: DESC: FYSZ00312024010901S DATE:2024/01/09 Version:A.0 PREPAREDBYCHECKEDBYAPPROVEDBYCUSTOMERAPPROVE IVYCAIjyu DingBaoyuan DongguanFANYAElectronicsCo.,LTD Factoryaddress:No.194,LiuwuTechnologyEastRoad,ShijieTown, DongguanCity. TEL ： 0769-22490287/22452492 FAX ： 0769-22499451 E-mail ： [email protected] Page2 of 4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 VersionChangeHistory Rev.BeforeChangeAfterChangeChangeDate ApprovedBy A.0 newissue ----2024/01/09 CAIjyu Page3 of 4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION DESC FYSZ00312024010901S Rev：A.0 CUST: SZ003 FineP/N: FYS003088 CUSTP/N: 1031.00285 一、DIMENSION:(mm) 二、SCHEMATICDIAGRAM: A 40±1.5 B 16±0.5 C 1.2+0.05/-0.1 D 25±1.5 E 2±1.5 F 43.9±0.5 G 5ref H 2.3Max (Excludingshapedpaper) I 2±1 J 38±0.5 pour: 1.Thecoilcrossline,the startinglineneedstobe flattened； 2.Backcoilhardmagneticsheet, magneticsheetsizeφ43.9± 0.5mm,openholeφ5mmref, thickness0.7±0.1mm,openL doublelineslot； 3.Attachφ46*0.05mmwith handtear3M55256glue(green 3Mglue)onthebackofthe magneticpiece,andattachφ 38*18*0.05mmwithhandtear green3Mglueonthefrontof thecoil. 三、WindingSpecification: NO.TERMINALWIRETurns WindingDirection 1SFsilk-coveredwire0.08*10511Ts CCW 四、ELECTRICALCHARACTERISTICS:TEMPERATURE:25±10°C,RELATIVEHUMIDITY:65±20% NO.ITEMTERMINALSPECIFICATIONTESTFREQUENCYTESTEQUIPMENTS 1IND.S-F6.5uH±10%Addmagneticsheet 100KHz/1.0VTH2829LX 2DCRS-F ≤50 mΩ @25°CTH2829LX PREPAREDBY/DATECHECKEDBY/DATE IVY2024/01/09CAIjyu2024/01/09 Page4 of 4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION DESC FYSZ00312024010901S Rev：A.0 CUST: SZ003 FineP/N： FYS003088 CUSTP/N: 1031.00285 五、PACKING: 5.1Packingpictures: 5.2PackingQuantity: 5.3Thepackagingshallbebasedontheexistingpackingplateandtheactualdeliverypackageshallprevail.If thereisanyrequirement,wecancustomizeit. 六、Materiallist: numberMaterialname Description Manufacturer 1silk-coveredwire0.08*1050.08*105 2 NoleadtinstripNoleadtinstrip 3 magneticsheet Magneticsheetsizeφ43.9±0.5mm,openhole φ5mmref,thickness0.7±0.1mm,openL doublelinegroove 43M55256ofglue φ46*0.05mmwith3M55256tape 53M55256ofglue φ38*18*0.05mmRemove3M55256gluewithhand 6 ItemQuantityMaterial Box200Pcs370*265*55mm BigCarton 1000Pcs420*270*310mm PREPAREDBY/DATECHECKEDBY/DATE IVY2024/01/09CAIjyu2024/01/09

No.：BCTC/RF-EMC-005 Page 1 of 21 Edition：B.1 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2403276489-1E Applicant: Otter Products, LLC. Product Name: WIRELESS POWER BANK DIVISION 2, 5K mAh Test Model: OBFTC-0152-A Tested Date: 2024-03-14 to 2024-04-01 Issued Date: 2024-04-01 Report No.: BCTC2403276489-1E No.：BCTC/RF-EMC-005 Page 2 of 21 Edition：B.1 FCC ID: 2AEEV-OBFTC0152A The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: WIRELESS POWER BANK DIVISION 2, 5K mAh Trademark: OTTERBOX Model/Type Reference: OBFTC-0152-A Prepared For: Otter Products, LLC. Address: 209 South Meldrum, Fort Collins, Colorado 80521, United States Manufacturer: Otter Products, LLC. Address: 209 South Meldrum, Fort Collins, Colorado 80521, United States Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-03-14 Sample Tested Date: 2024-03-14 to 2024-04-01 Issue Date: 2024-04-01 Report No.: BCTC2403276489-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2403276489-1E No.：BCTC/RF-EMC-005 Page 3 of 21 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Support Equipment ............................................................................................... 7 4.3 Test Setup Configuration ...................................................................................... 8 4.4 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup .............................................................................. 11 6.2 Limit .................................................................................................................... 11 6.3 Test procedure .................................................................................................... 11 6.4 EUT operating Conditions ................................................................................... 11 6.5 Test Result .......................................................................................................... 11 7. Radiated Emissions ............................................................................................. 12 7.1 Block Diagram Of Test Setup .............................................................................. 12 7.2 Limit .................................................................................................................... 13 7.3 Test procedure .................................................................................................... 13 7.4 Test Result .......................................................................................................... 14 8. Bandwidth Test .................................................................................................... 17 8.1 Test Procedure ................................................................................................... 17 8.2 Test Setup ........................................................................................................... 17 8.3 Test Result ...........................................................…

Text truncated - open the document above for the full version.