2AEPJ-TR2410ATLCAR ALARM

2022-03-23 © Automotive Data Solutions Inc. 1/11 OWNER’S MANUAL TERMS OF USE INSTALLER TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. Purchasers sole contractual remedy is refund of the purchase price of the ADS product(s). ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users. END USER TERMS OF USE ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system meets all safety regulations and operates as intended by the manufacturer, please follow the usage recommendations below: • DO NOT use this product for any purpose other than its intended usage. • DO NOT remote start a vehicle in an indoor or enclosed area (i.e. garage). Exhaust fumes are extremely dangerous and can cause personal injury or death. Install carbon monoxide detectors in every living area that can be exposed to vehicle exhaust fumes. • DO NOT remote start a vehicle while it is being serviced. Follow the Valet Mode procedure as outlined in your Owner’s Manual. • DO NOT remote start a vehicle in gear. • DO NOT remote start a vehicle with the key in the ignition. • DO NOT remote start a vehicle left unattended with open windows, unlocked doors or open convertible top. • DO NOT allow children handle or operate long range remotes. • ALWAYS engage your emergency brake prior to exiting your vehicle. This may limit motion if the vehicle is accidentally started in gear. • AVOID remote starting your vehicle while passengers or pets are on board. This may increase the risk of 2022-03-23 © Automotive Data Solutions Inc. 2/11 shifter being put in gear after vehicle has been remote started. • AVOID parking your vehicle on an inclined surface or an area surrounded by obstacles. For manual vehicles, ALWAYS ensure the Reservation Mode sequence, as outlined in your Owner’s Manual, is correctly engaged prior to the next remote start. • AVOID delaying the inspection of your iDatastart system in the event of malfunction. Immediately contact a Certified Technician to ensure that installation or defective equipment is properly addressed. REMOTE OVERVIEW Your iDatastart remote start system may include one or both long-range remotes listed below. Please take a moment to familiarize yourself with their general features. 2022-03-23 © Automotive Data Solutions Inc. 3/11 REMOTE COMMANDS & CONFIRMATIONS Your iDatastart remotes contain multiplexing technology which allows for multiple functions using the same button. Please take a moment to get acquainted with the following functions below: NOTES: 1. Non-highlighted icons = Press & release button 2. Highlighted (grey) icons = Press & hold button for 2.5 seconds 3. Coma (,) between icons = Press buttons one after the other 4. Timeout between each button press = 3 seconds LOCK AND ARM COMMANDLock & Arm BUTTON DESCRIPTION Secures your vehicle by locking the doors and arming the alarm. CONFIRMATION1 chime + 1 flash UNLOCK AND DISARM COMMANDUnlock & Disarm BUTTON DESCRIPTION Accesses your vehicle by unlocking the doors and disarming the alarm. CONFIRMATION2 chimes + 2 flashes ENGINE START COMMANDEngine Start BUTTON DESCRIPTIONStarts the engine. CONFIRMATION 4 chimes + 4 flashes (Button LEDs will also flash intermittently while engine is running) 2022-03-23 © Automotive Data Solutions Inc. 4/11 ENGINE STOP COMMANDEngine Stop BUTTON DESCRIPTIONStops the engine. CONFIRMATION3 chimes + 3 flashes PROGRAMMING A NEW REMOTE Are you replacing a lost or damaged remote or simply adding an extra remote to your iDatastart system? Please take note of the following: 1. A functional iDatastart system must already be installed in your vehicle. 2. All new remotes must be installed by an iDatastart Authorized Dealer. 3. A maximum of 4 remotes can be programmed to your iDatastart system. REPLACING REMOTE BATTERIES Follow the steps below to replace the batteries in your iDatastart remotes*. 1. Insert a 25 cent coin into the hollow corner of your iDatastart remote. 2. Gently twist the coin until the casing pops open. 3. Use your coin to pry open the rest of the case perimeter. 4. Carefully remove the circuit board from the case. 5. Slide the old battery out of its enclosure and replace with the new battery. 6. Carefully replace the circuit board into bottom half of the casing. 7. Snap top and bottom casings back together using your hands. 2022-03-23 © Automotive Data Solutions Inc. 5/11 REMOTE STARTING FROM FACTORY KEY FOB Your iDatastart system may enable remote engine start by performing one of the following button sequences on your factory key fob: BUTTONFUNCTION Press on Start engine Press on Stop engine OR BUTTONFUNCTION Press on Start engine Press on Stop engine NOTE: This feature may not be supported on some vehicles. If supported, the chosen button sequence will be communicated to you by your iDatastart Authorized Dealer at the time of installation. The remote start range will be equal to your factory key fob’s door lock range. ADJUSTING ENGINE RUNTIME SETTINGS Once remote started from your factory key fob or long-range remote, your vehicle will run for the programmed ‘runtim…

Text truncated - open the document above for the full version.

Automotive Data Solutions Inc. DATE :2022-3-29 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AEPJ-TR2410ATL Product Name: CAR ALARM Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description  BOM  TUNEUP These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2022-3-29 By: Thanh Liem Trinh Signature Printed Title: Product Development Director. On the behalf of: Automotive Data Solutions Inc. Telephone: 514-807-2888

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 3 EUT External Photos JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 3 JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 3 ------End------

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 4 EUT Internal Photos JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 4 JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 4 JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 4 of 4 ------End------

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZ-R14-2200055 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of theJYTproduct certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery orfalsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: Automotive Data Solutions Inc. Address of Applicant: 8400 Bougainville Montreal Quebec Canada H4P 2G1 Equipment Under Test (EUT) Product Name: CAR ALARM Model No.: TR2410ATL FCC ID: 2AEPJ-TR2410ATL Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 23 Mar., 2022 Test Result: Maximum Reported 1-g SAR (W/kg) Body: 0.639 Report No: JYTSZ-R14-2200055 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203054 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail:[email protected] Page 2 of 58 2 Version Version No. Date Description 00 12 Apr., 2022 Original Tested by: Date: 12 Apr., 2022 Test Engineer Reviewed by: Date: 12 Apr., 2022 Project Engineer Report No: JYTSZ-R14-2200055 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203054 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail:[email protected] Page 3 of 58 3 Contents 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 5 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 6 5.4 ENVIRONMENT OF TEST SITE ......................................................................................................................................................... 7 5.5 TEST SAMPLE PLAN ....................................................................................................................................................................... 7 5.6 TEST LOCATION ............................................................................................................................................................................. 7 6 INTRODUCTION ................................................................................................................................................... 8 6.1 INTRODUCTION ............................................................................................................................................................................... 8 6.2 SAR DEFINITION ............................................................................................................................................................................ 8 7 RF EXPOSURE LIMITS ....................................................................................................................................... 9 7.1 UNCONTROLLED ENVIRONMENT ..................................................................................................................................................... 9 7.2 CONTROLLED ENVIRONMENT ......................................................................................................................................................... 9 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................... 9 8 SAR MEASUREMENT SYSTEM ....................................................................................................................... 10 8.1 E-FIELD PROBE............................................................................................................................................................................ 11 8.2 ROBOT ...........................…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R12-2200484 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in above the application standard version. Test results reported herein relate only to the item(s) tested. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC RF Test Report (DTS) Applicant: Automotive Data Solutions Inc. Address of Applicant: 8400 Bougainville Montreal Quebec Canada H4P 2G1 Equipment Under Test (EUT) Product Name: CAR ALARM Model No.: TR2410ATL FCC ID: 2AEPJ-TR2410ATL Applicable Standards: FCC CFR Title 47 Part 15C (§15.247) Date of Sample Receipt: 10 Mar., 2022 Date of Test: 11 Mar., to 02 Apr., 2022 Date of Report Issued: 02 Apr., 2022 Test Result: PASS Tested by: Date: 02 Apr., 2022 Test Engineer Reviewed by: Date: 02 Apr., 2022 Project Engineer Approved by: Date: 02 Apr., 2022 Manager Report No.: JYTSZ-R12-2200484 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-168-C Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 24 2 Version Version No. Date Description 00 02 Apr., 2022 Original Report No.: JYTSZ-R12-2200484 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-168-C Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 24 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 CLIENT INFORMATION ............................................................................................................................................ 4 4.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 4 4.3 TEST MODE AND TEST ENVIRONMENT ................................................................................................................. 5 4.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5 4.5 MEASUREMENT UNCERTAINTY .............................................................................................................................. 5 4.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ..................................................................... 5 4.7 LABORATORY FACILITY .......................................................................................................................................... 5 4.8 LABORATORY LOCATION ....................................................................................................................................... 5 4.9 TEST INSTRUMENTS LIST ...................................................................................................................................... 6 5 MEASUREMENT SETUP AND PROCEDURE .................................................................................................. 7 5.1 TEST CHANNEL ...................................................................................................................................................... 7 5.2 TEST SETUP .......................................................................................................................................................... 7 5.3 TEST PROCEDURE ................................................................................................................................................. 9 6 TEST RESULTS.................................................................................................................................................. 10 6.1 SUMMARY ............................................................................................................................................................ 10 6.1.1 Clause and Data Summary ......................................................................................................................... 10 6.1.2 Test Limit ....................................................................................................................................................... 11 6.2 ANTENNA REQUIREMENT ..................................................................................................................................... 12 6.3 CONDUCTED OUTPUT POWER ............................................................................................................................ 13 6.4 EMISSION BANDWIDTH .......................................................................................................…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZ-R14-2200055 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203054 Page 1 of 3 EUT Photos (Model:TR2410ATL) JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZ-R14-2200055 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203054 Page 2 of 3 EUT Antenna Locations JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZ-R14-2200055 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203054 Page 3 of 3 SAR Test Setup Photos Body Front side (0mm) Back side(0mm)

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2203053 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 1 Setup Photos Radiated Spurious Emission Below 1GHz Above 1GHz ------End------