2AEPJ1150ACAR ALARM (ONE WAY)

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against in a residential installation. This equipment generates uses and can radiate radio frequency energy and, accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Class B digital device, harmful interference if not installed and used in no guarantee equipment does cause harmful IC Statement This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.

Automotive Data Solutions Inc. 2015-05-20 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Shenzhen Zhongjian Nanfang Testing Co.,Ltd.; 1st Floor, Block No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China；Bruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Automotive Data Solutions Inc. 8400 Bougainville ,Montreal ,Quebec H4P 2G1 Canada Dated this：2015-05-20 Signature ： Name/Title: Thanh Liem Trinh/ Product Development Director Tel. No.: 5148072888 Fax No.: 5148072999 E-Mail: [email protected] Company Name: Automotive Data Solutions Inc.

Automotive Data Solutions Inc. DATE :2015-05-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:_2AEPJ1150A___ ______ Product Name: :_ CAR ALARM(ONEWAY)___________ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operation Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature ˖˖ Name/Title: Thanh Liem Trinh/ Product Development Director Tel. No.: 5148072888 Fax No.: 5148072999 E-Mail: [email protected] Company Name: Automotive Data Solutions Inc. FCC ID: 2AEPJ1150A CAR ALARM (ONE WAY CAR ALARM(ONE WAY)

Report No: CCIS15050030201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150500302RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 22 Interior photo Report No: CCIS15050030201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150500302RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 22 ------End of report------

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Field strength = 97.51dBuV/m @3m Ant gain -0.71dBi; so Ant numeric gain=0.85 So pt={[10 (97.51/20) /10 6 x3] 2 /(30x0.85)}x1000mW = 2mW So (2mW/5mm)x √0.43392GHz = 0.2 6<3 Then SAR evaluation is not required

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS15050030201 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT Applicant: Automotive Data Solutions Inc. Address of Applicant: 8400 Bougainville, Montreal, Quebec H4P 2G1 Canada Equipment Under Test (EUT) Product Name: CAR ALARM(ONE WAY) Model No.: TR1150A FCC ID: 2AEPJ1150A Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231(a) Date of sample receipt: 11 May 2015 Date of Test: 12 May to 29 May 2015 Date of report issue: 29 May 2015 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS15050030201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150500302RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 22 2 Version Version No. Date Description 00 29 May 2015 Original Prepared By: Date: 29 May 2015 Report Clerk Check By: Date: 29 May 2015 Project Engineer Report No: CCIS15050030201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150500302RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 22 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODE ............................................................................................................................................................ 5 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5 5.5 LABORATORY FACILITY .......................................................................................................................................... 6 5.6 LABORATORY LOCATION ....................................................................................................................................... 6 5.7 TEST INSTRUMENTS LIST ....................................................................................................................................... 6 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 7 6.1 ANTENNA REQUIREMENT ....................................................................................................................................... 7 6.2 RADIATED EMISSION ............................................................................................................................................. 8 6.2.1 Field Strength Of The Fundamental Signal .............................................................................................. 10 6.2.2 Spurious Emissions ..................................................................................................................................... 11 6.3 20DB BANDWIDTH ............................................................................................................................................... 13 6.4 DURATION TIME ................................................................................................................................................... 15 7 TEST SETUP PHOTOS...................................................................................................................................... 17 8 EUT CONSTRUCTIONAL PHOTOS ................................................................................................................. 18 Report No: CCIS15050030201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150500302RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, G…

Text truncated - open the document above for the full version.

Report No: CCIS15050030201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150500302RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 22 7 Test Setup Photos Radiated Emission(below 1G) Radiated Emission(above 1G)