2AF82-BDG100BLE Dongle

Quick Start Guide BDG-100 BLE Dongle This guide is designed to help you quickly set up the BDG-100. CARE AND WARNING WARNING : Changes or modifica�ons to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. Correct disposal of this product : This marking indicates that this product should not be disposed with other household wastes To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, use the return and collec�on systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. FCC & CE RF radia�on Exposure Statement Cau�on : Pl ace the product at least 20cm from nearby persons. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on.If this equipment does cause harmful interference to radio or tele vision recep�on, which can b e determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : Reorient or relocate the receiving antenna. Increase the separa�on between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/panel PC technician for help. This device complies with Part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons : May not cause harmful interference. Must accept any interference received, including interference that may cause undesired opera�on. Replacement of a ba�ery with an incorrect type that can defeat a safeguard Disposal of a ba�ery into fire or a hot oven, or mechanically crushing or cu�ng of a ba�ery,that can result in an explosion; Leaving a ba�ery in an extremely high temperature surrounding environment that can result in an explosion flammable liquid or gas . Canada, Industry Canada (IC) No�ces This device contains licence-exempt transmi�er(s)/receiver(s) that comply with Innova�on, Science and Economic Development Canada’s licence-exempt RSS(s). Opera�on is subject to the following two condi�ons: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired opera�on of the device. Canada, avis d'Industry Canada (IC) L’éme�eur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innova�on, Sciences et Dévelop- pement économique Canada applicables aux appareils radio exempts de licence. L’exploita�on est autorisée aux deux condi�ons suivantes : 1.L’appareil ne doit pas produire de brouillage; L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscep�ble d’en comprome�re le fonc�onnement. Radio Frequency (RF) Exposure Informa�on The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the poten�al for human contact during normal opera�on is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure condi�ons. (antennas are greater than 20cm from a person's body). Informa�ons concernant l'exposi�on aux fréquences radio (RF) La puissance de sor�e émise par l’appareil de sans fil est inférieure à la limite d'exposi�on aux fréquences radio d'Industry Canada (IC). U�lisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonc�onnement normal. Ce périphérique a également été évalué et démontré conforme aux limites d'exposi�on aux RF d'IC dans des condi�ons d'exposi- �on à des appareils mobiles (antennes sont supérieures à 20 cm à par�r du corps d'une personne). ammable liquid or gas; CAUTION Risk of explosion if the battery is replaced by an incorrect type. Qbic Technology Co.,Ltd.26F.-12,No.99.Sec.1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, Taiwan(R.O.C) TEL:886-2-2697-2000 FAX:886-2-2697-2868 Brand: Qbic Model: BDG-100 Input: 5V20mA Opera�ng Temperature: 0-40°C 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備 之干擾。 INSTRUCTIONS Plug the Adapter directly to the USB port on Qbic Android PC. Then,the user can use Qbic Tool to check the status of Adapter when the Adapter is installed correctly or not.

Rev11/20/07 QbicTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AF82-BDG100 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName (BlockDiagram,Schematics,Operational Description,SoftwareSecurityDescription) (BlockDiagram.pdf,Schematics.pdf, OperationalDescription.pdf,SoftwareSecurity Description.pdf) Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequestthat theinformationattachedtothisapplicationbetemporarilyconfidentialfor180daysasoutlined below: ExhibitTypeFileName UserManual ExternalPhotos InternalPhotos TestSetupPhotos UserManual.pdf ExternalPhotos.pdf InternalPhotos.pdf TestSetupPhotos.pdf Sincerely, Signature: printedname:VincentChen Date:June1,2023

ReportNo.:EED32P80651001Page 35 of 41 10PHOTOGRAPHSOFEUTConstructionalDetails ViewofProduct-1 ViewofProduct-2 ReportNo.:EED32P80651001Page 36 of 41 ViewofProduct-3 ViewofProduct-4 ReportNo.:EED32P80651001Page 37 of 41 ViewofProduct-5 ViewofProduct-6 ReportNo.:EED32P80651001Page 38 of 41 ViewofProduct-7 ViewofProduct-8

Model：BDG-100 FCC ID：2AF82-BDG100 IC：23322-BDG100 Qbic Technology Co., Ltd Made in China BDG-100

ReportNo.:EED32P80651001Page 39 of 41 ViewofProduct-9 ViewofProduct-10 ReportNo.:EED32P80651001Page 40 of 41 ViewofProduct-11 ViewofProduct-12 ReportNo.:EED32P80651001Page 41 of 41 ViewofProduct-13 ViewofProduct-14 Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthis reportreferonlytothesample(s)tested.WithoutwrittenapprovalofCTI,thisreportcan’tbereproduced exceptinfull. ***EndofReport***

ReportNo.:EED32P80651002Page1of7 1COVERPAGE RFExposureEvaluationReport Product:BLEDongle Trademark:Qbic Model/Typereference:BDG-100,BDG-10X(whereX=0-9, a-z,A-Z,"-",orblankformarketing purpose) SerialNumber:N/A ReportNumber:EED32P80651002 FCCID: 2AF82-BDG100 DateofIssue:May30,2023 TestStandards: 47CFRPart1.1307 47CFRPart1.1310 47CFRPart2.1091 47CFRPart2.1093 447498D04InterimGeneralRF ExposureGuidancev01 Testresult:PASS Preparedfor: QbicTechnologyCo.,Ltd. 26F.-12,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipei City221416,Taiwan,China Preparedby : CentreTestingInternationalGroupCo.,Ltd. HongweiIndustrialZone,Bao’an70District, Shenzhen,Guangdong,China TEL:+86-755-33683668 FAX:+86-755-33683385 Compiledby:Reviewedby: MarkChen TomChen Approvedby:Date:May30,2023 AaronMa CheckNo.:1638060523 ReportNo.:EED32P80651002Page2of7 2Version VersionNo.DateDescription 00 May30,2023 Original ReportNo.:EED32P80651002Page3of7 3Contents Page 1COVERPAGE....................................................................................................................................................................1 2VERSION............................................................................................................................................................................2 3CONTENTS........................................................................................................................................................................3 4GENERALINFORMATION..............................................................................................................................................4 4.1C LIENT I NFORMATION ...................................................................................................................................................4 4.2G ENERAL D ESCRIPTIONOF EUT...................................................................................................................................4 4.3P RODUCT S PECIFICATIONSUBJECTIVETOTHISSTANDARD ...........................................................................................4 4.4T EST L OCATION .............................................................................................................................................................5 4.5D EVIATIONFROM S TANDARDS ......................................................................................................................................5 4.6A BNORMALITIESFROM S TANDARD C ONDITIONS ..........................................................................................................5 4.7O THER I NFORMATION R EQUESTEDBYTHE C USTOMER ................................................................................................5 5SAREVALUATION...........................................................................................................................................................6 5.1RFE XPOSURE C OMPLIANCE R EQUIREMENT .................................................................................................................6 5.1.1Limits....................................................................................................................................................................6 5.1.2TestProcedure....................................................................................................................................................6 5.1.3EUTRFExposureEvaluation..........................................................................................................................7 ReportNo.:EED32P80651002Page4of7 4GeneralInformation 4.1ClientInformation Applicant:QbicTechnologyCo.,Ltd. AddressofApplicant:26F.-12,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipeiCity221416, Taiwan,China Manufacturer:QbicTechnologyCo.,Ltd. AddressofManufacturer:26F.-12,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipeiCity221416, Taiwan,China Factory1: JiangxiXingtaiTechnologyInc. AddressofFactory1: JizhouDistrictindustrialpark,Ji'an,Jiangxi,China Factory2: QbicTechnologyCo.,Ltd. AddressofFactory2: 26F.-10,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipeiCity221416, Taiwan,China Factory3: LihRongElectronicEnterpriseCo.,Ltd. AddressofFactory3: No.486,Sec.1,WanshouRd.,GuishanDist.,TaoyuanCity333026,Taiwan, China Factory4: LihRongElectronicEnterpriseCo.,Ltd AddressofFactory4: No.1,GaoxiaRd.,ZhongliDist.,TaoyuanCity320030,Taiwan,China 4.2GeneralDescriptionofEUT ProductName: BLEDongle ModelNo.(EUT): BDG-100,BDG-10X(whereX=0-9,a-z,A-Z,"-",orblankformarketingpurpose) TestModelNo.:BDG-100 TradeMark: Qbic 4.3 ProductSpecificationsubjectivetothisstandard FrequencyRange:BTSinglemode,2402MHz~2480MHz ModulationType:GFSK TestPowerGrade:Default TestSoftwareofEUT:DirectTestMode AntennaType: ExternalAntenna AntennaGain: 3dBi PowerSupply: DC5V MaxConductedPeak OutputPower: 6.48dBm TheMaxConductedPeakOutputPowerdatarefertothereportEED32P80651001 SampleReceivedDate: May06,2023 SampletestedDate: May06,2023toMay15,2023 CompanyNameandAddressshownonReport,thesample(s)andsampleInformationwas/wereprovided bytheapplicantwhoshouldberesponsiblefortheauthenticitywhichCTIhasn’tverified. Model:BDG-100,BDG-10X(whereX=0-9,a-z,A-Z,"-",orblankformarketingpurpose) OnlythemodelBDG-100wastested.Theyhavesameelectrical,PCBandlayout,onlythemodelnamesare differentformarketingrequirements. ReportNo.:EED32P80651002Page5of7 4.4TestLocation Alltestswereperformedat: CentreTestingInternationalGroupCo.,Ltd BuildingC,HongweiIndustrialParkBlock70,Bao'anDistrict,Shenzhen,China Telephone:+86(0)75533683668Fax:+86(0)75533683385 Notestsweresub-contracted. FCCDesignationNo.:CN1164 4.5DeviationfromStandards None. 4.6AbnormalitiesfromStandardConditions None. 4.7OtherInformationRequestedbytheCustomer None. ReportNo.:EED32P80651002Page6of7 5SAREvaluation 5.1RFExposureComplianceRequirement 5.1.1Limits TheSAR-basedexemptionformulaof§1.1307(b)(3)(i)(B),repeatedhereasFormula(B.2),appliesfor singlefixed,mobile,andportableRFsourceswithavailablemaximumtime-av…

Text truncated - open the document above for the full version.

ReportNo.:EED32P80651001Page1of41 1 COVERPAGE TESTREPORT Product:BLEDongle Trademark:Qbic Model/Typereference:BDG-100,BDG-10X(whereX=0-9, a-z,A-Z,"-",orblankformarketing purpose) SerialNumber:N/A ReportNumber:EED32P80651001 FCCID: 2AF82-BDG100 DateofIssue:May30,2023 TestStandards:47CFRPart15SubpartC Testresult:PASS Preparedfor: QbicTechnologyCo.,Ltd. 26F.-12,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipei City221416,Taiwan,China Preparedby : CentreTestingInternationalGroupCo.,Ltd. HongweiIndustrialZone,Bao’an70District, Shenzhen,Guangdong,China TEL:+86-755-33683668 FAX:+86-755-33683385 Compiledby:Reviewedby: MarkChen TomChen Approvedby:Date:May30,2023 AaronMa CheckNo.:1638060523 ReportNo.:EED32P80651001Page 2 of 41 2Content 1COVERPAGE.....................................................................................................................................................................1 2CONTENT............................................................................................................................................................................2 3VERSION.............................................................................................................................................................................3 4TESTSUMMARY...............................................................................................................................................................4 5GENERALINFORMATION...............................................................................................................................................5 5.1C LIENT I NFORMATION ....................................................................................................................................................5 5.2G ENERAL D ESCRIPTIONOF EUT.................................................................................................................................5 5.3T EST C ONFIGURATION ..................................................................................................................................................7 5.4T EST E NVIRONMENT .....................................................................................................................................................7 5.5D ESCRIPTIONOF S UPPORT U NITS ...............................................................................................................................8 5.6T EST L OCATION .............................................................................................................................................................8 5.7M EASUREMENT U NCERTAINTY (95% CONFIDENCELEVELS , K =2).............................................................................8 6EQUIPMENTLIST..............................................................................................................................................................9 7TESTRESULTSANDMEASUREMENTDATA.........................................................................................................12 7.1A NTENNA R EQUIREMENT ............................................................................................................................................12 7.2M AXIMUM C ONDUCTED O UTPUT P OWER ..................................................................................................................13 7.3DTSB ANDWIDTH ........................................................................................................................................................14 7.4M AXIMUM P OWER S PECTRAL D ENSITY .....................................................................................................................15 7.5B AND E DGEMEASUREMENTSAND C ONDUCTED S PURIOUS E MISSION ...................................................................16 7.6R ADIATED S PURIOUS E MISSION &R ESTRICTEDBANDS ...........................................................................................17 8APPENDIXBLE................................................................................................................................................................32 9PHOTOGRAPHSOFTESTSETUP..............................................................................................................................33 10PHOTOGRAPHSOFEUTCONSTRUCTIONALDETAILS...................................................................................35 ReportNo.:EED32P80651001Page 3 of 41 3Version VersionNo.DateDescription 00May30,2023Original ReportNo.:EED32P80651001Page 4 of 41 4TestSummary TestItemTestRequirementResult AntennaRequirement 47CFRPart15SubpartCSection 15.203/15.247(c) PASS ACPowerLineConducted Emission 47CFRPart15SubpartCSection 15.207 N/A DTSBandwidth 47CFRPart15SubpartCSection 15.247(a)(2) PASS MaximumConductedOutput Power 47CFRPart15SubpartCSection 15.247(b)(3) PASS MaximumPowerSpectral Density 47CFRPart15SubpartCSection15.247(e)PASS BandEdgeMeasurements 47CFRPart15SubpartCSection 15.247(d) PASS ConductedSpurious Emissions 47CFRPart15SubpartCSection 15.247(d) PASS RadiatedSpuriousEmission& Restrictedbands 47CFRPart15SubpartCSection 15.205/15.209 PASS N/A:WhentheEUTcharging,BTwillnotwork,SoNotApplicable. Remark: CompanyNameandAddressshownonReport,thesample(s)andsampleInformationwereprovidedbythe applicantwhoshouldberesponsiblefortheauthenticitywhichCTIhasn’tverified. Model:BDG-100,BDG-10X(whereX=0-9,a-z,A-Z,"-",orblankformarketingpurpose) OnlythemodelBDG-100wastested.Theyhavesameelectrical,PCBandlayout,onlythemodelnamesare differentformarketingrequirements. ReportNo.:EED32P80651001Page 5 of 41 5GeneralInformation 5.1ClientInformation Applicant: QbicTechnologyCo.,Ltd. AddressofApplicant: 26F.-12,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipeiCity 221416,Taiwan,China Manufacturer: QbicTechnologyCo.,Ltd. AddressofManufacturer: 26F.-12,No.99,Sec.1,Xintai5thRd.,XizhiDist.,NewTaipeiCity 221416,Taiwan,China Factory1: JiangxiXingtaiTechnologyInc. Addres…

Text truncated - open the document above for the full version.

SpecificationForApproval CustomerName： SpecificationDescription：SmallFoldingAntenna-2.4G-RP-SMA InnerNutPin manufacturer：ShenzhenYimingyuanTechnologyCo.,Ltd Manufacturer'spartnumber：YMY2023JB108-2400 Customerconfirmation ConfirmationcheckApprover Manufacturerrecognition SalesDrafterscheckApprover LiChaoJiangXiaopingZhangBinMaFeng 一.ProductDimensionalDrawing 二：Antennaperformance： 1Electricalperformanceparameters 2S11testdata Electricalperformanceparameters Frequencyrange（MHz） 2400-2500 standing-waveratio（dB）≤2.0 gain（dBi）3 Polarizationmodevertical impedance（Ω）50 maximumpower（W）25 Environmentalparameters operationtemperature（°C） -40～+70 storagetemperature（°C） -45～+75 三.Cableheadspecifications,materials,andcoatings Serial Number PartNamematerialqualitycladdingmaterialnotes 1InnerConductorbrassgold-plating 2insulatorTeflonPTFE 3housingbrassgold-plating 4 Plating thickness gold-plating1～1.2u" Electricalperformance Serial Number TestingitemsTECHNICALINDEXnotes 1 Characteristic impedance 50Ω 2temperaturerange-55～+155°C 3Frequencyrange0～3GHZ 4 dielectricwithstand voltage 1000V(rms) 5contactresistance InnerConductor≤3mΩ OUTERCONDUCTOR≤2mΩ 6insulationresistance≥5000MΩ 7vswr≤1.25(flexiblecable) 三.EnvironmentalExperimentReport： 1Highandlowtemperatureconstanthumiditytest ItemnumberProductnameand specifications TestitemsHightemperature,lowtemperature,constanthumiditytest test equipment HumidityChamberNumberoftests Inspection standards 1.Themetalsurfacecoatingisfreeofdefectssuchasdetachment, cracks,wrinkling,etc;Nonmetallicpartsshouldnothave discoloration,cracks,deformation,degumming,orotherphenomena. TestNameTestitemsasktestmethodResult determina tion High Temperature Test temperature（°C） Testsample temperaturetime （h） Testduration（h） recoverytime（h） 75±3 1 2 1 Teststeps： a)Placethetestpieceintothe testchamber,andthenadjust thetemperatureofthe high-temperaturechamberto 75°C±3°Ctomonitorthe time. b)Aftertheexperiment,place atroomtemperaturefor1hour andconductroutineinspection. qualified Low Temperature temperature（°C） Testsample temperaturetime （h） Testduration（h） recoverytime（h） -40± 3 1 2 1 Teststeps： a)Placethetestpieceintothe testchamber,thenadjustthe temperatureofthe low-temperaturechamberto -40°C±3°C,andmonitorthe time。 b)Aftertheexperiment,place atroomtemperaturefor1hour andconductroutineinspection. qualified Constant dampheat test temperature（°C） relativehumidity （%） Testduration（h） recoverytime（h） +40± 3 90-95 21 1 a)Placethetestpieceintothe testchamber,andthenadjust thetemperatureofthechamber to+40°C±3°C,witha humidityof90-95%.Monitorthe time. b)Aftertheexperiment,place atroomtemperaturefor1hour andconductroutineinspection. qualified inspector：LuXiaojuntoexamine：WangHongkunratify：XiaoTianfang 2Freefalltest ItemnumberProductnameand specifications TestitemsFreefalltest testequipment1meterhighdesktopNumberoftests Inspection standards 1.Whendroppedataheightof1meter,theproducthasnopeeling, cracking,orotherdefects,andtheappearancehasnodeformation orotherphenomena. TestNameTestitemsasktestmethodResult determination FreefalltestDropheight 1000mm Falling twiceon bothsides Teststeps： a)Dropthetestedpiece fromaheightof1000mm andconductroutine inspectionafterthe test. qualified inspector：LuXiaojuntoexamine：WangHongkunratify：XiaoTianfang 3Saltspraytest ItemnumberProductnameandspecifications TestitemsFogtest test equipment FogtestingmachineNumberoftests Inspection standards 1.Nopeelingofthemetalsurfacecoating;Theappearanceshallbefree fromrust,corrosion,oxidationandotheradversephenomena. TestNameTestitemsasktestmethodResult determination Saltspray test 1.nacl concentration： 2.airpressure： 3.phvalue： 4.Sprayamount： 5.Saltwater testing temperature setting a.Laboratory temperature： b.Pressure barrel temperature： 6.Testtime： 40-60g/1kg 1.0±0.01kgf㎡ 6.5-7.2 1.0-2.0ml/80c/h。 35±1°C 47±1°C 24H Teststeps： a)Adjustthe saltspray testing machineto therelevant testing conditions. b)Placethe testedpiece inasalt spraytesting machineand letitstand for24hours. Afterthe test,rinse withclean water, visually inspectthe appearanceof thetested piece,and conduct routine inspections. qualified inspector：LuXiaojuntoexamine：WangHongkunratify：XiaoTianfang 、 四Productimage

ReportNo.: EED32P80651001 Page1of34 Appendix:BluetoothLE ReportNo.: EED32P80651001 Page2of34 Contents Contents.....................................................................................................................................................................................................2 DutyCycle..................................................................................................................................................................................................3 MaximumPeakConductedOutputPower..................................................................................................................................................7 -6dBBandwidth........................................................................................................................................................................................11 OccupiedChannelBandwidth..................................................................................................................................................................15 MaximumPowerSpectralDensityLevel..................................................................................................................................................19 BandEdge................................................................................................................................................................................................23 ConductedRFSpuriousEmission............................................................................................................................................................28 ReportNo.: EED32P80651001 Page3of34 DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTBLE1M2402Ant161.442.122.6 NVNTBLE1M2440Ant161.442.122.6 NVNTBLE1M2480Ant161.62.12.6 NVNTBLE2M2402Ant138.724.124.13 NVNTBLE2M2440Ant138.724.124.13 NVNTBLE2M2480Ant138.724.124.13 ReportNo.: EED32P80651001 Page4of34 TestGraphs DutyCycleNVNTBLE1M2402MHzAnt1 DutyCycleNVNTBLE1M2440MHzAnt1 ReportNo.: EED32P80651001 Page5of34 DutyCycleNVNTBLE1M2480MHzAnt1 DutyCycleNVNTBLE2M2402MHzAnt1 ReportNo.: EED32P80651001 Page6of34 DutyCycleNVNTBLE2M2440MHzAnt1 DutyCycleNVNTBLE2M2480MHzAnt1 ReportNo.: EED32P80651001 Page7of34 MaximumPeakConductedOutputPower ConditionModeFrequency (MHz) AntennaConductedPower (dBm) Limit (dBm) Verdict NVNTBLE1M2402Ant15.7530Pass NVNTBLE1M2440Ant15.9830Pass NVNTBLE1M2480Ant16.4830Pass NVNTBLE2M2402Ant15.6730Pass NVNTBLE2M2440Ant15.9830Pass NVNTBLE2M2480Ant16.4630Pass ReportNo.: EED32P80651001 Page8of34 TestGraphs PeakPowerNVNTBLE1M2402MHzAnt1 PeakPowerNVNTBLE1M2440MHzAnt1 ReportNo.: EED32P80651001 Page9of34 PeakPowerNVNTBLE1M2480MHzAnt1 PeakPowerNVNTBLE2M2402MHzAnt1 ReportNo.: EED32P80651001 Page10of34 PeakPowerNVNTBLE2M2440MHzAnt1 PeakPowerNVNTBLE2M2480MHzAnt1 ReportNo.: EED32P80651001 Page11of34 -6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTBLE1M2402Ant10.7740.5Pass NVNTBLE1M2440Ant10.7790.5Pass NVNTBLE1M2480Ant10.7810.5Pass NVNTBLE2M2402Ant11.2260.5Pass NVNTBLE2M2440Ant11.2180.5Pass NVNTBLE2M2480Ant11.2210.5Pass ReportNo.: EED32P80651001 Page12of34 TestGraphs -6dBBandwidthNVNTBLE1M2402MHzAnt1 -6dBBandwidthNVNTBLE1M2440MHzAnt1 ReportNo.: EED32P80651001 Page13of34 -6dBBandwidthNVNTBLE1M2480MHzAnt1 -6dBBandwidthNVNTBLE2M2402MHzAnt1 ReportNo.: EED32P80651001 Page14of34 -6dBBandwidthNVNTBLE2M2440MHzAnt1 -6dBBandwidthNVNTBLE2M2480MHzAnt1 ReportNo.: EED32P80651001 Page15of34 OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTBLE1M2402Ant11.056 NVNTBLE1M2440Ant11.056 NVNTBLE1M2480Ant11.05 NVNTBLE2M2402Ant12.134 NVNTBLE2M2440Ant12.124 NVNTBLE2M2480Ant12.106 ReportNo.: EED32P80651001 Page16of34 TestGraphs OBWNVNTBLE1M2402MHzAnt1 OBWNVNTBLE1M2440MHzAnt1 ReportNo.: EED32P80651001 Page17of34 OBWNVNTBLE1M2480MHzAnt1 OBWNVNTBLE2M2402MHzAnt1 ReportNo.: EED32P80651001 Page18of34 OBWNVNTBLE2M2440MHzAnt1 OBWNVNTBLE2M2480MHzAnt1 ReportNo.: EED32P80651001 Page19of34 MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) DutyFactor (dB) TotalPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTBLE 1M 2402Ant1-9.330-9.338Pass NVNTBLE 1M 2440Ant1-9.060-9.068Pass NVNTBLE 1M 2480Ant1-8.450-8.458Pass NVNTBLE 2M 2402Ant1-8.240-8.248Pass NVNTBLE 2M 2440Ant1-7.920-7.928Pass NVNTBLE 2M 2480Ant1-7.390-7.398Pass ReportNo.: EED32P80651001 Page20of34 TestGraphs PSDNVNTBLE1M2402MHzAnt1 PSDNVNTBLE1M2440MHzAnt1 ReportNo.: EED32P80651001 Page21of34 PSDNVNTBLE1M2480MHzAnt1 PSDNVNTBLE2M2402MHzAnt1 ReportNo.: EED32P80651001 Page22of34 PSDNVNTBLE2M2440MHzAnt1 PSDNVNTBLE2M2480MHzAnt1 ReportNo.: EED32P80651001 Page23of34 BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-46.75-20Pass NVNTBLE1M2480Ant1-50.6-20Pass NVNTBLE2M2402Ant1-30.07-20Pass NVNTBLE2M2480Ant1-50.91-20Pass ReportNo.: EED32P80651001 Page24of34 TestGraphs BandEdgeNVNTBLE1M2402MHzAnt1Ref BandEdgeNVNTBLE1M2402MHzAnt1Emission ReportNo.: EED32P80651001 Page25of34 BandEdgeNVNTBLE1M2480MHzAnt1Ref BandEdgeNVNTBLE1M2480MHzAnt1Emission ReportNo.: EED32P80651001 Page26of34 BandEdgeNVNTBLE2M2402MHzAnt1Ref BandEdgeNVNTBLE2M2402MHzAnt1Emission ReportNo.: EED32P80651001 Page27of34 BandEdgeNVNTBLE2M2480MHzAnt1Ref BandEdgeNVNTBLE2M2480MHzAnt1Emission ReportNo.: EED32P80651001 Page28of34 ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-36.33-20Pass NVNTBLE1M2440Ant1-37.49-20Pass NVNTBLE1M2480Ant1-40.05-20Pass NVNTBLE2M2402Ant1-35.8-20Pass NVNTBLE2M2440Ant1-37.77-20Pass NVNTBLE2M2480Ant1-39.86-20Pass ReportNo.: EED32P80651001 Page29of34 TestGraphs Tx.SpuriousNVNTBLE1M2402MHzAnt1Ref Tx.SpuriousNVNTBLE1M2402MHzAnt1Emission ReportNo.: EED32P80651001 Page30of34 Tx.SpuriousNVNTBLE1M2440MHzAnt1Ref Tx.SpuriousNVNTBLE1M2440MHzAnt1Emission ReportNo.: EED32P80651001 Page31of34 Tx.SpuriousNVNTBLE1M2480MHzAnt1Ref Tx.SpuriousNVNTBLE1…

Text truncated - open the document above for the full version.

ReportNo.:EED32P80651001Page 33 of 41 9PHOTOGRAPHSOFTESTSETUP RadiatedspuriousemissionTestSetup-1 (Below1GHz) RadiatedspuriousemissionTestSetup-2( Above1GHz) ReportNo.:EED32P80651001Page 34 of 41 RadiatedspuriousemissionTestSetup-3(Above1GHz) Thereareabsorbingmaterialsundertheground.