2AFF6-21YNNADLSPEAKER BOX

Preliminary - For internal use only GENERAL SAFETY AND COMPLIANCE INFORMATION 1 ENGLISH................................................. 1 DEUTSCH................................................ 7 FRANÇAIS............................................... 13 ITALIANO................................................ 20 POLSKI................................................... 26 ESPAÑOL................................................ 32 1 INTRODUCTION 1.1READ THE COMPLETE DOCUMENTATION This document is an abridged version of the documentation. Follow the QR code to the complete user manual. 1.2YOU MADE THE RIGHT CHOICE! This product has been developed and manufactured to the highest quality standards to ensure many years of problem-free operation. Find further information about LD Systems on our website: https://www.ld-systems.com/ 2 PRODUCT COMPLIANCE 2.1MANUFACTURER'S DECLARATION Adam Hall offers a voluntary, EU-wide manufacturer's guarantee of 2 years. The statutory warranty period is not affected by this voluntary guarantee. Visit the Adam Hall Service Portal to access the Download Centre: https://portal.adamhall.com/ Under the Service & Regulations section, you find our current detailed manufacturer's declarations, war- ranty conditions, and limitation of liability. To request warranty for a product, please contact: Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu-Anspach [email protected] 0049 (0)6081 / 9419-1000. 2.2DECLARATION OF CONFORMITY Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable) l Electrical Equipment (Safety) Regulations 2016 l Electromagnetic Compatibility Regulations 2016 (SI 2016/1091) l The Restriction of the Use of Certain Hazardous Sub- stances in Electrical and Electronic Equipment Regu- lation 2012 (SI 2012/3032) l Radio Equipment Regulations 2017 (SI 2016/2015) ANNY® 12 12" PORTABLE BATTERY-POWERED BLUETOOTH® PA SYSTEM WITH MIXER LDANNY12US SPEAKER BOX Preliminary - For internal use only GENERAL SAFETY AND COMPLIANCE INFORMATION 2 Products that are subject to Electrical Equip- ment(Safety)Regulation 2016, EMC Regulation 2016 or RoHS Regulation can be requested at info@adam- hall.com. Products that are subject to the Radio Equip- ments Regulations 2017 (SI2017/1206) can be down- loaded at http://www.adamhall.com/compliance . FCC Statement This device complies with part 15 of the FCC Rules. Op- eration is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference re- ceived, including interference that may cause un- desired operation. CAUTION! RF Exposure Information: This equip- ment complies with FCC radiation exposure lim- its set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radi- ator and your body. CAUTION! Any changes or modifications to this device not explicitly approved by the manufac- turer could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference in a residential installation. This equipment generates, uses and can radiate radio frequency en- ergy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra- dio communications. However, there is no guarantee that interference will not occur in a particular installa- tion. If this equipment does cause harmful interfer- ence to radio or television reception, which can be de- termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connec- ted to. l Consult the dealer or an experienced radio/TV tech- nician for help. ISED Statement This device contains licence-exempt transmitter(s)/re- ceiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two condi- tions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐003 (B)/NMB‐003(B). This equipment complies with IC RSS-102 radiation ex- posure limits set forth for an uncontrolled environ- ment. This equipment should be installed and oper- ated with minimum distance 20cm between the radi- ator and your body. This device meets the exemption from the routine evaluation limits in section 6.6 of RSS 102 and compli- ance with RSS 102 RF exposure, users can obtain Cana- dian information on RF exposure and compliance. 3 SAFETY INSTRUCTIONS 3.1INTENDED USE This device is to be used exclusively for the purpose described in the complete user manual. Any other use not explicitly described in the complete user manual is prohibited and may result in injury or damage to the device. Preliminary - For internal use only GENERAL SAFETY AND COMPLIANCE INFORMATION 3 This product has been developed for the professional use in the field of event technology, studio, TV, and broadcast. The device is intended for mobile applications and not for fixed installations. The device is not suitable for continuous electrical op- eration. The device is intended for indoor use only. It is suitable for domestic use. Do not use the product outside the operating condi- tions as stated in the user manual under Technical Data. Liability for damage and third-party damage to per- sons and property due to inappropriate use is ex- cluded. Use of this device requires full sensory and cognitive abilities to …

Text truncated - open the document above for the full version.

Adam Hall GmbH Adam-Hall-Str.1,61267 Neu-Anspach, Germany 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Dec. 18, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2AFF6-21YNNADL Product Name: SPEAKER BOX This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Michael Roesch Title: QM-Compliance Address: Adam-Hall-Str.1,61267 Neu-Anspach, Germany Tel.: +49 6081 9419753 Email: [email protected] Adam Hall GmbH Adam-Hall-Str.1,61267 Neu-Anspach, Germany 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

Attestation Statements 2025-03-07 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, IJSA RE: Attestation Statements Part 2.911(d}(7} request for {FCC ID: 2AFF6-21VNNADL) � the undersigned, hereby authorize Adam Hall No rth America.to act as our designated U.S. a gent for service of process,� accepts to ma intain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commi�sion-related proceeding involving the equipment. Adam Hall North America accepts the responsibility to act as designated U.S. agent for service o f process. Ap plicant Information: Company name: Adam Hall GmbH Contact Name: Michael Roesch FRN:0024765042 Address: Adam-Hall-Str. 1, 61267 Neu-Anspach, Germany Telephone No: +49 6081 9419753 Email: michaelroesch@adamh乱com ／／ Signature．二了 Michael I U.S. Agent Information: Company Name: Adam Hall North America Address: FRN: 0033445966 Contact Name: Gabrie ， Tel.: Signature: 1 South Corporate Dr Riverdale, NJ 7627 United States (973)335-7888 222 Inc oesch Roesch g

Adam Hall GmbH Declaration Letter of Model Difference Date: 2025-12-15 FCC ID: 2AFF6-21YNNADL Tested Model Number: LDANNY12US Adding Model Number(s): LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 All Adding Model Number(s) is/are same electrically identical as Tested Model Number. All models are the same, but different in appearance only. Yours Sincerely, Applicant: Adam Hall GmbH Address: Adam-Hall-Str.1,61267 Neu-Anspach, Germany Contact Person: Michael Roesch Tel.: +49 6081 9419753 Email: [email protected] Sincerely, Signature:

Page 1 of 6 Report No.: LGT25J182 Appendix - External Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 6 Report No.: LGT25J182 Appendix - External Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 6 Report No.: LGT25J182 Appendix - External Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 6 Report No.: LGT25J182 Appendix - External Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 6 Report No.: LGT25J182 Appendix - External Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 6 Report No.: LGT25J182 Appendix - External Photographs of EUT Constructional Details Photo 11 Photo 12

LD ANNY 12_bottom_sticker_V7_30.06.25 sticker: black matt printing: Pantone 430C Label Size: 125mm*65mm

Page 1 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 5 Photo 6 ANT Page 4 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 11 Photo 12 Page 7 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 13 Photo 14 Page 8 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 15 Photo 16 Page 9 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 17 Photo 18 Page 10 of 10 Report No.: LGT25J182 Appendix - Internal Photographs of EUT Constructional Details Photo 19 Photo 20

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 8 EMF TEST REPORT Product Name: SPEAKER BOX Model Number: LDANNY12US, LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 FCC ID: 2AFF6-21YNNADL Issued For : Adam Hall GmbH Adam-Hall-Str.1,61267 Neu-Anspach, Germany Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25J182HA01 Sample Received Date: Oct. 29, 2025 Date of Test: Oct. 29, 2025 ~ Nov. 06, 2025 Date of Issue: Nov. 06, 2025 Report No.: LGT25J182HA01 Page 2 of 8 TEST REPORT CERTIFICATION Applicant: Adam Hall GmbH Address: Adam-Hall-Str.1,61267 Neu-Anspach, Germany Manufacturer: Ningbo Tonwel Audio Co.,Ltd. Address: 499 YinDong North Road,ZhanQi Town, Ningbo, China Product Name: SPEAKER BOX Trademark: , LD SYSTEMS Model Number: LDANNY12US, LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR §2.1091 KDB 447498 D01 General RF Exposure Guidance v06 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25J182HA01 Page 3 of 8 TABLE OF CONTENTS 1 . GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST LABORATORY 5 2 . FCC 47CFR §2.1093 REQUIREMENT 错误!未定义书签。 2.1 TEST STANDARDS 错误!未定义书签。 2.2 LIMIT 错误!未定义书签。 2.3 TEST RESULT 8 Report No.: LGT25J182HA01 Page 4 of 8 Revision History Rev. Issue Date Revisions 00 Nov. 06, 2025 Initial Issue Report No.: LGT25J182HA01 Page 5 of 8 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name: SPEAKER BOX Test Model Number: LDANNY12US Series Number: LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 Model Difference: All models are the same, but different in appearance only. Frequency Bands: Bluetooth 2402-2480MHz Rating: Input: AC 100-240V~ 50/60Hz 250W Hardware Version: N/A Software Version: N/A Software Version: N/A 1.2 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 Report No.: LGT25J182HA01 Page 6 of 8 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 0.3-3.0 614 1.63 *(100) 3.0-30 1842/f 4.89/f *(900/f 2 ) 30-300 61.4 0.163 1.0 300 - 1500 -- -- F/300 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 1.34-30 824/f 2.19/f *(180/f 2 ) 30-300 27.5 0.073 0.2 300 - 1500 -- -- F/1500 1500 – 100000 -- -- 1.0 F= Frequency in MHz * = Plane-wave equivalent power density. Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Report No.: LGT25J182HA01 Page 7 of 8 2.3 EUT OPERATION CONDITION EUT was enabled to transmit and receive at lowest, middle and highest channels. 2.4 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance from the antenna should be included in the User manual. So, this device is classified as Mobile device. Report No.: LGT25J182HA01 Page 8 of 8 2.5 TEST RESULT Turn up Result Mode Turn up Power BT-GFSK -1.5±1dBm BT-π/4-DQPSK -1±1dBm BT-8DPSK -0.5±1dBm BLE 1M-GFSK 1.5±1dBm The MPE result of worst mode: RF Function Frequency (MHz) Max Turn up Power (dBm) Max Turn up Power (mW) ANT Gain (dBi) ANT Gain (gain of antenna in linear scale) Power Density (mW/cm²) Limit (mW/ cm²) Ratio Resul t BT 2402 0.5 1.12 -0.68 0.86 0.000 1 0.0002 Pass BLE 2402 2.5 1.78 -0.68 0.86 0.000 1 0.0003 Pass Note: 1. The Maximum Power Density is less than the limit, complies with the exem…

Text truncated - open the document above for the full version.

1. Antenna Description Antenna plate FPC antenna Market name/Model name BR1001 Manufacture Iton Technology Corp Antenna Max. Gain -0.68dBi Frequency Range 2400.0-2480.0MHz VSWR 1.1 Manufacturer Shenzhen Shenchao Communication Technology Co., LTD Address West 531C, Decorative Building, Building 10, Bagualing Industrial Zone, No.8 Bagualing 1st Road, Pengsheng Community, Yuanling Street, Futian District, Shenzhen 2. Picture of antenna Width=10mm Length=38mm 3. Antenna Radiation Pattern Radiation pattern--2.402GHz Total Average Gain: -0.68dBi Phi 0 45 90 135 180 235 270 315 Gain -1.12 -0.70 -0.82 -0.91 -0.97 -0.68 -11.32 -1.21 Radiation pattern--2.441GHz Total Average Gain: -0.87dBi Phi 0 45 90 135 180 235 270 315 Gain -1.15 -1 -0.96 -1.13 -0.98 -0.87 -0.92 -0.95 Radiation pattern--2.480GHz Total Average Gain: -1.09dBi Phi 0 45 90 135 180 235 270 315 Gain -1.14 -1.25 -1.10 -1.12 -1.09 -1.11 -1.30 -1.18

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 52 RF TEST REPORT Product Name: SPEAKER BOX Model Number: LDANNY12US, LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 FCC ID: 2AFF6-21YNNADL Issued For : Adam Hall GmbH Adam-Hall-Str.1,61267 Neu-Anspach, Germany Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25J182RF02 Sample Received Date: Oct. 29, 2025 Date of Test: Oct. 29, 2025 ~ Nov. 06, 2025 Date of Issue: Nov. 06, 2025 Report No.: LGT25J182RF02 Page 2 of 52 TEST REPORT CERTIFICATION Applicant: Adam Hall GmbH Address: Adam-Hall-Str.1,61267 Neu-Anspach, Germany Manufacturer: Ningbo Tonwel Audio Co.,Ltd. Address: 499 YinDong North Road,ZhanQi Town, Ningbo, China Product Name: SPEAKER BOX Trademark: , LD SYSTEMS Model Number: LDANNY12US, LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 Sample Status: Normal Serial Number: LGT2510225-1 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2020 + COR.1-2023 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25J182RF02 Page 3 of 52 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST LABORATORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 9 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 10 2.5 EQUIPMENTS LIST 11 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 20 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 21 4.6 TEST RESULTS 22 4.7 TEST RESULTS (BAND EDGE REQUIREMENTS) 30 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 34 5.1 LIMIT 34 5.2 TEST PROCEDURE 34 5.3 TEST SETUP 34 5.4 EUT OPERATION CONDITIONS 34 5.5 TEST RESULTS 34 6. POWER SPECTRAL DENSITY TEST 35 6.1 LIMIT 35 6.2 TEST PROCEDURE 35 6.3 TEST SETUP 35 Report No.: LGT25J182RF02 Page 4 of 52 6.4 EUT OPERATION CONDITIONS 35 6.5 TEST RESULTS 35 7. BANDWIDTH TEST 36 7.1 LIMIT 36 7.2 TEST PROCEDURE 36 7.3 TEST SETUP 36 7.4 EUT OPERATION CONDITIONS 36 7.5 TEST RESULTS 36 8. PEAK OUTPUT POWER TEST 37 8.1 LIMIT 37 8.2 TEST PROCEDURE 37 8.3 TEST SETUP 37 8.4 EUT OPERATION CONDITIONS 37 8.5 TEST RESULTS 37 9. ANTENNA REQUIREMENT 38 9.1 STANDARD REQUIREMENT 38 9.2 EUT ANTENNA 38 APPENDIX I - TEST RESULTS 39 1. DUTY CYCLE 39 2. BANDWIDTH 41 3. MAXIMUM CONDUCTED OUTPUT POWER 44 4. MAXIMUM POWER SPECTRAL DENSITY 46 5. UNWANTED EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS 48 APPENDIX II - MEASUREMENT PHOTOS 52 Report No.: LGT25J182RF02 Page 5 of 52 Revision History Rev. Issue Date Contents 00 Nov. 06, 2025 Initial Issue Report No.: LGT25J182RF02 Page 6 of 52 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247, Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB&99% Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020 + COR.1-2023. Report No.: LGT25J182RF02 Page 7 of 52 1.1 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 Company Number: 28858 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Occupied Channel Bandwidth ±0.46% 2 RF Output Power, Conducted ±0.71dB 3 Power Spectral Density, Conducted ±1.57dB 4 Unwanted Emission, Conducted ±0.63dB 5 Conducted emission ±2.80dB 6 All Emissions, Radiated (0.009-30MHz) ±2.16dB 7 All Emissions, Radiated (30MHz-1GHz) ±4.61dB 8 All Emissions, Radiated (1GHz-18GHz) ±5.49dB 9 Temperature ±0.5°C 10 Humidity ±2% 11 Duty Cycle ±2.3% Note: The measurement uncertainty is not included in the test result. Report No.: LGT25J182RF02 Page 8 of 52 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name: SPEAKER BOX Test Model Number: LDANNY12US Series Number: LDANNY12HHDB47, LDANNY12HHD2B47, LDANNY12BPHB47, LDANNY12BPH2B47, LDANNY12HBH2B47, LDANNY12HHDB51, LDANNY12HHD2B51, LDANNY12BPHB51, LDANNY12BPH2B51, LDANNY12HBH2B51 Model Difference: All models are the same, but different in appearance only. Product Description: Operation Frequency: 2402~2480 MHz Modulation Type: GFSK Radio Technology: BLE Bluetooth Configuratio…

Text truncated - open the document above for the full version.

Page 1 of 2 Report No.: LGT25J182 Appendix - Test Setup photos Set-up for Radiated Spurious Emission, Below 1GHz Set-up for Radiated Spurious Emission, Above 1GHz Page 2 of 2 Report No.: LGT25J182 Set-up for Conducted Emission Set-up for Radio Spectrum