2AGBW9290029808XLED Lamp

3222 639 03602 0201030405060708 10111213141516 171819202122232425 262728293031323334 353637383940414243 444546474849505152 53 09 2 1 3 APP 4 ? www.meethue.com/bluetooth 5 B 23 1 4 ? www.meethue.com/philipshueapp 5 C 2 < 15cm. sec. 10 4 3x 5 6 3 1 ? www.meethue.com 7 APP A A To connect your new Hue bulb, select the installation instruction (A, B or C) that is applicable to you. C Pour raccorder votre nouvelle ampoule Hue, sélectionnez la consigne d’installation (A, B ou C) qui s’applique à vous. E Para conectar su nueva bombilla Hue, seleccione la instrucción de instalación (A, B o C) que sea aplicable en su caso. © 2019 Signify Holding Please go to www.meethue.com to learn more about Hue and how to use it. This device complies with Part 15 of the FCC Rules and with RSS of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-005. This digital apparatus does not exceed the class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. NOTICE:Changes or modifications made to this device not expressly approved by Signify North America Corporation (“Signify”) may void the U.S. FCC and Canadian authorization to operate this device. The advanced interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The manufacturer is not responsible for any radio orTV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This device generates,uses,and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference to radio or television reception,which can be determined by turning the device off and on,the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the device and receiver - Connect the device into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/television technician for help Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Caution: To maintain compliance with the FCC’s RF exposure guidelines,place the product at least 20cm from nearby persons. WARNINGSAND CAUTIONS: •The bulb is suitable for use in open luminaries (fixtures). •The bulb is not suitable for totally enclosed fixtures. •The bulb is not intended for use with emergency exit fixtures or emergency lights. •The bulb is not compatible with photo controls,occupancy sensors,or timing devices unless specifically designed for Hue. •The bulb is not suitable for use with dimmers. • Risk of electric shock – Do not use device where directly exposed to water. • Before replacing,turn off power and let the bulb cool to avoid electrical shock or burn. •Thedeviceisforindooruseonly. • Do not use the device in wet locations,e.g.bathrooms or outdoors. •This device is not a toy designed to be played with by children. • Do not place the device on hot surfaces. • For safety reasons, do not open device, which will also void the warranty. • Only use the adaptor supplied; using a different adaptor can damage the device. • Use the bulb only in a socket rated for this bulb. • CAUTION - RISK OF ELECTRIC SHOCK. Do not use if outer lamp envelope is damaged or broken. LIMITEDWARRANTY: Signify warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours average usage per day/7 days per week, when used as directed. If this device does not conform to the warranty, Signify will send you, at its election, a replacement device or refund your original purchase price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll-free number 1-800-555-0050, write to Signify (address indicated on the packaging) or send an email at the website www.meethue.com/warranty to find out how to return the device.This limited warranty does not coverdevices subject to accident, neglect, abuse, misuse or acts of God. REPLACEMENT OR REFUND ISYOUR SOLE REMEDY. EXCEPTTOTHE EXTENT PROHIBITED BY APPLICABLE LAW,ANY IMPLIEDWARRANTIESARE LIMITED IN DURATIONTOTHE DURATION OFTHISWARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. CLEANING AND MAINTENANCE: Do not clean the device when it is on and connected to the power supply. Toavoidscratchingthedevice,cleanonlywithasoftdrycloth. Do not use cleaning agents to clean the device. Manage in accordance with disposal laws in your area. “Hue PersonalWireless Lighting” is a trademark owned by Signify Holding B.V. Philips and the Philips shield emblem are registered trademarks of…

Text truncated - open the document above for the full version.

RF_160, Issue 04 Signify (China) Investment Co., Ltd. Declaration of Authorization We Name: Signify (China) Investment Co., Ltd. Address: Building 9, Lane 888,Tianlin Road,Minhang district Shanghai, China City: Shanghai Country: CHINA Declare that: Name Representative of agent: Carlin Qin Agent Company name: DEKRA Testing and Certification (Shanghai) Co., Ltd. Address: 8F, No. 250, Jiangchangsan Road, 200436 City: Shanghai Country CHINA is authorized to apply for Certification of the following product(s): Product description: LED Lamp Type designation: 9290029808 Trademark: PHILIPS Validity/ expiry date on our behalf. Date: 2021.4.9 City: Shanghai Name:  Yefeng Zhang (2) Function: ...Approbation Group Manager... Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY (DoC) Equipment: LED Lamp Trademark(s) and Model(s): PHILIPS/9290029808 Manufacturer: Signify (China) Investment Co., Ltd. FCC ID in case other parts of this equipment are subject to certification: 2AGBW9290029808X This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number: Issue date: 20C0533R-RF-US-P06V01 2021-03-18 20C0533R-RF-US-P06V02 2021-03-18 20C0533R-RF-US-P20V01 2021-03-18 The following manufacturer/importer/entity (located in the USA) is responsible for this declaration: Company name: Signify (China) Investment Co., Ltd. Name/Title (legal representative): Yefeng Zhang Approbation Group Manager Address: Building 9, Lane 888,Tianlin Road,Minhang district Shanghai, China Phone: +86-21-24128779 Fax: E-mail: [email protected] Date: 2021.4.9 Signature: FCC

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Signify (China) Investment Co., Ltd. Address: Building 9, Lane 888, Tianlin Road, Minhang district City: Shanghai Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AGBW9290029808X Reference number: 6092919 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: April 16, 2021 Name and signature of applicant: Yefeng Zhang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-External photo Page 1 / 2 (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-External photo Page 2 / 2 (3) EUT Photo

Signify Classified - Internal Model: 9290029808 FCC ID: 2AGBW9290029808X IC: 20812-29808X

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-Internal photo Page 1 / 3 (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-Internal photo Page 2 / 3 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-Internal photo Page 3 / 3 (5) EUT Photo (6) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 20C0553R-RF-US-P20V01 FCC & ISED Exposure TEST REPORT Product Name LED Lamp Trademark PHILIPS Model and /or type reference 9290024783 9290024784 9290024785 9290029808 9290029809 FCC ID 2AGBW9290024783X 2AGBW9290024784X 2AGBW9290024785X 2AGBW9290029808X 2AGBW9290029809X IC 20812-24783X 20812-24784X 20812-24785X 20812-29808X 20812-29809X Applicant ́s name / address Signify (China) Investment Co., Ltd Building no.9, Lane 888, Tianlin Road, Minhang District, Shanghai, 200233, China Test method requested, standard KDB 447498D01V06 FCC Part1.1310 RSS-102: Issue 5, 2015 Verdict Summary IN COMPLIANCE Test by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/Supervisor Date of issue 2021-03-18 Report template No Template_FCC-MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-CE-P20V01 Page 2 / 11 INDEX page Competences and Guarantees ............................................................................................................................. 3 General conditions ............................................................................................................................................... 3 Environmental conditions ..................................................................................................................................... 3 Possible test case verdicts ................................................................................................................................... 4 Abbreviations ....................................................................................................................................................... 4 Document History ................................................................................................................................................ 5 Remarks and Comments ..................................................................................................................................... 5 1 General Information .................................................................................................................................... 6 1.1 General Description of the Item(s) ..................................................................................................... 6 1.2 Antenna Information .......................................................................................................................... 8 2 RF Exposure Evaluation .............................................................................................................................. 9 2.1 Limits ................................................................................................................................................ 9 2.2 Test Procedure ............................................................................................................................... 10 2.3 Test Result of RF Exposure Evaluation ........................................................................................... 11 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-CE-P20V01 Page 3 / 11 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) Dec. 15, 2020 Date (start test) Dec. 15, 2020 Date (finish test) Jan. 12, 2021 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-…

Text truncated - open the document above for the full version.

1 1 2 2 3 3 4 4 DD CC BB AA Title NumberRevisionSize A4 Date:2020/9/7Sheet of File:\\..\4422 951 90491_02.schdocDrawn By: VLED+ 5k1 0805 R1 4 4 A 1 3 3 K 2 ABS10 DB1 F1 N1 N 1mH L1 PGND Filament BP i PCB Rule i PCB Rule i PCB Rule i PCB Rule 320VAC MOV1 C11 5.6uF/400V 21 L31 Dia7.7 C31 0603/1UF C33 6.3V/220UF R33 0603/1.5k 3.3V PGND D11 E1J D13 E1J VIN 8 NC 7 OUT1 6 OUT2 5 DIM2 3 CS2 4 CS1 2 DIM1 1 G N D 9 U2 BP5778EJ PGND R25 56 R21 N.CR23 200R24 N.C FW CW LED-CW- LED-FW- PGND R22 56 R26 200 R12 1206/27 R13 1206/27 C32 220nF/400V 1 WW- 1 CW- 1 LED+ VRECT VRECT VIN 8 NC 7 OUT1 6 OUT2 5 DIM2 3 CS2 4 CS1 2 DIM1 1 G N D 9 U1 BP5778EJ D12 E1J 3.3V PGND R15 10K R14 1K R16 1K Q11 2N7002/SOT23 R17 1K R14~R17: 0402 8X16 0406 VCC 8 NC 7 SEL 6 IC GND 5 NC 3 DRA 4 GND 2 VOUT 1 U3 BP8501CH PGND PGND 12 34 56 RF Header 3X2 FW PGND3.3V PGND CW Antenna i PCB Rule i PCB Rule iPCB Rule 1 2 3D14 BAV70WT FW CW i PCB rule iPCB rule i PCB rule + - i PCB rule i PCB rule 1 TP1 1 TP2 1 TP4 1 TP5 1 TP3 1 FM1 1 FM2 PIC1101 PIC1102 COC11 PIC3101 PIC3102 COC31 PIC3201 PIC3202 COC32 PIC3301 PIC3302 COC33 PICW001 COCW0 PID1101 PID1102 COD11 PID1201 PID1202 COD12 PID1301 PID1302 COD13 PID1401 PID1402 PID1403 COD14 PIDB101 PIDB102 PIDB103 PIDB104 CODB1 PIF101 PIF102 COF1 PIFM101 COFM1 PIFM201 COFM2 PIL101 PIL102 COL1 PIL3101 PIL3102 COL31 PILED001 COLED0 PIMOV101 PIMOV102 COMOV1 PIN01 CON PIQ1101 PIQ1102 PIQ1103 COQ11 PIR101 PIR102 COR1 PIR1201 PIR1202 COR12 PIR1301 PIR1302 COR13 PIR1401 PIR1402 COR14 PIR1501 PIR1502 COR15 PIR1601 PIR1602 COR16 PIR1701 PIR1702 COR17 PIR2101 PIR2102 COR21 PIR2201 PIR2202 COR22 PIR2301 PIR2302 COR23 PIR2401 PIR2402 COR24 PIR2501 PIR2502 COR25 PIR2601 PIR2602 COR26 PIR3301 PIR3302 COR33 PIRF01 PIRF02 PIRF03 PIRF04 PIRF05 PIRF06 CORF PITP101 COTP1 PITP201 COTP2 PITP301 COTP3 PITP401 COTP4 PITP501 COTP5 PIU101 PIU102 PIU103 PIU104 PIU105 PIU106 PIU107 PIU108 PIU109 COU1 PIU201 PIU202 PIU203 PIU204 PIU205 PIU206 PIU207 PIU208 PIU209 COU2 PIU301 PIU302 PIU303 PIU304 PIU305 PIU306 PIU307 PIU308 COU3 PIWW001 COWW0 PIC3301 PIL3101 PIR1401 PIR3302 PIRF04 PIU301 NL303V PIRF06 NLAntenna PID1402 PIR2101 PIRF01 PIU201 NLCW PID1401 PIR2401 PIRF02 PIU203 NLFW PICW001 PITP401 PIU206 PITP501 PIU205 PIWW001 PIDB104 PIN01 PITP201 NLN PIC1102 PID1201 PID1302 PIC3101 PIU306 PIU308 PIC3102 PIL3102 PIU305 PID1202 PIU105 PIU106 PIU108 PID1403 PIQ1101 PIR1702 PIDB101 PIL102 PIR102 PIDB103 PIF101 PITP101 PIF102 PIFM101 PIFM201 PIQ1103 PIR1601 PIR1201 PIU102 PIR1301 PIU104 PIR1402 PIR1501 PIR1602 PIU101 PIU103 PIR2201 PIR2301 PIU202 PIR2501 PIR2601 PIU204 PIU107 PIU207 PIU303 PIU307 PIC3202 PIC3302 PID1301 PIDB102 PIMOV101 PIQ1102 PIR1202 PIR1302 PIR1502 PIR1701 PIR2102 PIR2202 PIR2302 PIR2402 PIR2502 PIR2602 PIR3301 PIRF03 PIRF05 PIU109 PIU209 PIU302 NLPGND PIC1101 PID1102 PILED001 PITP301 PIU208 PIC3201 PID1101 PIL101 PIMOV102 PIR101 PIU304

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 DD CC BB AA Title NumberRevisionSize A3 Date:2020/8/28Sheet of File:\\..\4422 951 90501_01.schdocDrawn By: 1 3 2 4 2016 38.4MHz Y700 0402 2.0nH L700 0402 1.5pF C706 0402 3.3nH L701 0402 1.5pF C704 0402 100nF C703 0402 47nF C700 0402 18nH L702 0402 12pF C707 C W F W R X D T X D S W C L K S W D I O RESETn 0402 1uF C710 VCC_3V3 VCC_3V3 0402 10nF C712 VCC_3V3 0402 2.5pF C706A 0402 47nF C701 P C 0 0 1 P C 0 1 2 P C 0 2 3 P C 0 3 4 P C 0 4 5 P C 0 5 6 H F X T A L _ P 7 H F X T A L _ N 8 RESETn 9 RFVDD 10 RFGND 11 2G4RF2 12 2G4RF1 13 PB01 15 PAVDD 14 PB00 16 P A 0 0 1 7 P A 0 1 1 8 P A 0 2 1 9 P A 0 3 2 0 P A 0 4 2 1 P A 0 5 2 2 P A 0 6 2 3 D E C O U P L E 2 4 DVDD 25 AVDD 26 IOVDD 27 PD04 28 PD03 29 PD02 30 PD01 31 PD00 32 V S S 0 U701 EFR32MG21-QFN32 0402 12pF C717 0402 18nH L704 0603 2.2uF C718 0402 1uF C719 0402 100nF C720 Filament RF module PAVDD RFVDD TXD RXD SWCLK SWDIO VCC_3V3 TP701 TP702 TP703 TP705 TP707 TP708 RESETn SWCLK SWDIO TP704 RXD TXD RESETn R X D T X D A n t e n n a 0402 1k R701 0402 1k R704 12 34 56 J701 Header 3X2 CWFW VCC_3V3GND GNDAntenna FWCW PIC70001 PIC70002 COC700 PIC70101 PIC70102 COC701 PIC70301 PIC70302 COC703 PIC70401 PIC70402 COC704 PIC70601 PIC70602 COC706 PIC706A01 PIC706A02 COC706A PIC70701 PIC70702 COC707 PIC71001 PIC71002 COC710 PIC71201 PIC71202 COC712 PIC71701 PIC71702 COC717 PIC71801 PIC71802 COC718 PIC71901 PIC71902 COC719 PIC72001 PIC72002 COC720 PIJ70101 PIJ70102 PIJ70103 PIJ70104 PIJ70105 PIJ70106 COJ701 PIL70001 PIL70002 COL700 PIL70101 PIL70102 COL701 PIL70201 PIL70202 COL702 PIL70401 PIL70402 COL704 PIR70101 PIR70102 COR701 PIR70401 PIR70402 COR704 PITP70101 COTP701 PITP70201 COTP702 PITP70301 COTP703 PITP70401 COTP704 PITP70501 COTP705 PITP70701 COTP707 PITP70801 COTP708 PIU70100 PIU70101 PIU70102 PIU70103 PIU70104 PIU70105 PIU70106 PIU70107 PIU70108 PIU70109 PIU701010 PIU701011 PIU701012 PIU701013 PIU701014 PIU701015 PIU701016 PIU701017 PIU701018 PIU701019 PIU701020 PIU701021 PIU701022 PIU701023 PIU701024 PIU701025 PIU701026 PIU701027 PIU701028 PIU701029 PIU701030 PIU701031 PIU701032 COU701 PIY70001 PIY70002 PIY70003 PIY70004 COY700 PIC70401 PIJ70106 PIL70101 NLAntenna PIJ70101 PIU701020 NLCW POCW PIJ70102 PIU701021 NLFW POFW PIC70001 PIC70101 PIC70301 PIC70601 PIC706A01 PIC70702 PIC71002 PIC71201 PIC71702 PIC71802 PIC71902 PIC72001 PIJ70103 PIJ70105 PIL70102 PIR70101 PIR70401 PITP70801 PIU70100 PIU701011 PIU701013 PIY70002 PIY70004 NLGND PIC70302 PITP70501 PIU70109 NLRESETn PORESETn PIC70402 PIC70602 PIL70002 PIC706A02 PIL70001 PIU701012 PIC71001 PIU701024 PIR70102 PIU701032 PIR70402 PIU70102 PIU70101 PIU70103 PIU70104 PIU70105 PIU70106 PIU70107 PIY70003 PIU70108 PIY70001 PIU701017 PITP70101 PIU701018 NLSWCLK POSWCLK PITP70201 PIU701019 NLSWDIO POSWDIO PIU701022 PIU701023 PIU701028 PIU701029 PIU701030 PIU701031 PIC70102 PIC70701 PIL70201 PIU701014 NLPAVDD PIC70002 PIC71701 PIL70401 PIU701010 NLRFVDD PITP70401 PIU701015 NLRXD PORXD PITP70301 PIU701016 NLTXD POTXD PIC71202 PIC71801 PIC71901 PIC72002 PIJ70104 PIL70202 PIL70402 PITP70701 PIU701025 PIU701026 PIU701027 NLVCC03V3 POCW POFW PORESETn PORXD POSWCLK POSWDIO POTXD

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 20C0553R-RF-US-P06V02 FCC & ISED TEST REPORT Product Name LED Lamp Trademark PHILIPS Model and /or type reference 9290024783 9290024784 9290024785 9290029808 9290029809 FCC ID 2AGBW9290024783X 2AGBW9290024784X 2AGBW9290024785X 2AGBW9290029808X 2AGBW9290029809X IC 20812-24783X 20812-24784X 20812-24785X 20812-29808X 20812-29809X Applicant ́s name / address Signify (China) Investment Co., Ltd Building no.9, Lane 888, Tianlin Road, Minhang District, Shanghai, 200233, China Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10: 2013 RSS-Gen Issue 5 RSS-247 Issue 2 Verdict Summary IN COMPLIANCE Test by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/Supervisor Date of issue 2021-03-18 Report template No Template_FCC 15.247-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20C0553R-RF-US-P06V02 Page 2 / 96 INDEX page General conditions ...................................................................................................................................................... 4 Environmental conditions ............................................................................................................................................ 4 Possible test case verdicts .......................................................................................................................................... 5 Abbreviations .............................................................................................................................................................. 5 Document History ....................................................................................................................................................... 6 Remarks and Comments ............................................................................................................................................. 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty ................................................................................................................................................................. 9 1 General Information.......................................................................................................................................... 10 1.1 General Description of the Item(s) .......................................................................................................... 10 1.2 Antenna Information ............................................................................................................................... 11 1.3 Channel List ........................................................................................................................................... 12 2 Description of Test Setup ................................................................................................................................. 13 2.1 Operating mode(s) used for tests ............................................................................................................ 13 2.2 Test Configuration / Block diagram used for tests ................................................................................... 14 2.3 Testing process ...................................................................................................................................... 15 3 Verdict summary section .................................................................................................................................. 16 3.1 Standards............................................................................................................................................... 16 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ......................................................................... 16 3.3 Overview of results ................................................................................................................................. 17 3.4 Test Facility ............................................................................................................................................ 18 4 Test Results ..................................................................................................................................................... 19 4.1 AC Power Line Conducted Emission ...................................................................................................... 19 4.1.1 Limit ............................................................................................................................................. 19 4.1.2 Test Setup .................................................................................................................................... 19 4.1.3 Test Procedure ............................................................................................................................. 19 4.1.4 Test Data ..................................................................................................................................... 20 4.2 Emissions in restricted frequency bands ................................................................................................. 22 4.2.1 Limit ............................................................................................................................................. 22 4.2.2 Test Setup ............................................................................................................................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 20C0553R-RF-US-P06V01 FCC & ISED TEST REPORT Product Name LED Lamp Trademark PHILIPS Model and /or type reference 9290024783 9290024784 9290024785 9290029808 9290029809 FCC ID 2AGBW9290024783X 2AGBW9290024784X 2AGBW9290024785X 2AGBW9290029808X 2AGBW9290029809X IC 20812-24783X 20812-…

Text truncated - open the document above for the full version.