2AGBW9290031348XLED light

Project Manager: Trident Artist: PHILIPS HUE White and Color Ambiance N/A Trident UK As Previous 440402911712 N/A Margarita Papoutsi ARTWORK PHL502304 Trident UK, Connaught House, Connaught Road, Kingswood Business Park, Hull, HU7 3AP, England. T:+44 (0) 01482 828100 Please note that any low resolution paper Canon colour copies associated with this job should be referred to for content, layout and colour separation only. UNDER NO CIRCUMSTANCES SHOULD THIS ARTWORK BE ALTERED WITHOUT PRIOR PERMISSION FROM TRIDENT. Dieline Guides Technical & Non Printing Items TR2355768 17/01/2022 B Samantha Reilly Colours: Master Ref: TR Ref: Brand: Brand execution: Product name: Article Number: Region: Template Ref: Artwork 12NC: Die cut 12NC: Barcode: CRC Number: Action: Date: 1 Black LTH A User manual Notice d’emploi Manual de usuario 5/6” Retrofit Recessed Downlight HUE serial number 120 mm 100 mm Project Manager: Trident Artist: PHILIPS HUE White and Color Ambiance N/A Trident UK As Previous 440402911712 N/A Margarita Papoutsi ARTWORK PHL502304 Trident UK, Connaught House, Connaught Road, Kingswood Business Park, Hull, HU7 3AP, England. T:+44 (0) 01482 828100 Please note that any low resolution paper Canon colour copies associated with this job should be referred to for content, layout and colour separation only. UNDER NO CIRCUMSTANCES SHOULD THIS ARTWORK BE ALTERED WITHOUT PRIOR PERMISSION FROM TRIDENT. Dieline Guides Technical & Non Printing Items TR2355768 17/01/2022 B Samantha Reilly Colours: Master Ref: TR Ref: Brand: Brand execution: Product name: Article Number: Region: Template Ref: Artwork 12NC: Die cut 12NC: Barcode: CRC Number: Action: Date: 1 Black LTH D Service label 2 A A Incl. B B Excl. B B 120 mm 100 mm Project Manager: Trident Artist: PHILIPS HUE White and Color Ambiance N/A Trident UK As Previous 440402911712 N/A Margarita Papoutsi ARTWORK PHL502304 Trident UK, Connaught House, Connaught Road, Kingswood Business Park, Hull, HU7 3AP, England. T:+44 (0) 01482 828100 Please note that any low resolution paper Canon colour copies associated with this job should be referred to for content, layout and colour separation only. UNDER NO CIRCUMSTANCES SHOULD THIS ARTWORK BE ALTERED WITHOUT PRIOR PERMISSION FROM TRIDENT. Dieline Guides Technical & Non Printing Items TR2355768 17/01/2022 B Samantha Reilly Colours: Master Ref: TR Ref: Brand: Brand execution: Product name: Article Number: Region: Template Ref: Artwork 12NC: Die cut 12NC: Barcode: CRC Number: Action: Date: 1 Black LTH 3 WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. WARNING – Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input ratings of the luminaire. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation. WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE AND APPROPRIATE ELECTRICAL CODES. THE INSTALLATION GUIDE DOES NOT SUPERSEDE LOCAL OR NATIONAL REGULATIONS FOR ELECTRICAL INSTALLATIONS. Installers should examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any damaged parts prior to installation of the retrofit kit. THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS or NOT FOR EMERGENCY LIGHTING SUITABLE FOR TYPE IC OR NON-IC LUMINAIRES This lamp is only compatible with provided or other specified controls listed in these instructions for proper functionality. This lamp will not operate properly when connected to a standard incandescent dimmer or other off-shelf dimming controls. The Hue Retrofit Recessed Downlight is designed to install into most recessed can fixtures. However, please be aware that it may not be compatible with some models. Always ensure a secure fit into the can and ensure that the Hue Retrofit Recessed Downlight fits firmly against the ceiling and does not sag out of the fixture. The retrofit down light should be used only with metal housing, and the metal housing should be grounded A 120 mm 100 mm Project Manager: Trident Artist: PHILIPS HUE White and Color Ambiance N/A Trident UK As Previous 440402911712 N/A Margarita Papoutsi ARTWORK PHL502304 Trident UK, Connaught House, Connaught Road, Kingswood Business Park, Hull, HU7 3AP, England. T:+44 (0) 01482 828100 Please note that any low resolution paper Canon colour copies associated with this job should be referred to for content, layout and colour separation only. UNDER NO CIRCUMSTANCES SHOULD THIS ARTWORK BE ALTERED WITHOUT PRIOR PERMISSION FROM TRIDENT. Dieline Guides Technical & Non Printing Items TR2355768 17/01/2022 B Samantha Reilly Colours: Master Ref: TR Ref: Brand: Brand execution: Product name: Article Number: Region: Template Ref: Artwork 12NC: Die cut 12NC: Barcode: CRC Number: Action: Date: 1 Black LTH 4 AVERTISSEMENT – Risques d’incendie ou de décharge électrique. L’ensemble de modernisation DEL requiert une connaissance des systèmes de luminaires électriques. Ne pas procéder à l’installation à moins de disposer des compétences appropriées. Communiquez avec un électricien qualifié. AVERTISSEMENT – Risques d’incendie ou de décharge électrique. Cet ensemble ne doit être installé que sur les luminaires possédant les caractéristiques de constructions et les dimensions indiquées sur les photos ou les dessins. La tension d’entrée de l’ensemble de modernisation ne doit pas surpasser celle du luminaire. Ne pas …

Text truncated - open the document above for the full version.

Project Manager: Trident Artist: PHILIPS Non Connected Indoor N/A Trident UK As Previous 440402911882 N/A Nina Broeren-Daemen ARTWORK PHL433250 Trident UK, Connaught House, Connaught Road, Kingswood Business Park, Hull, HU7 3AP, England. T:+44 (0) 01482 828100 Please note that any low resolution paper Canon colour copies associated with this job should be referred to for content, layout and colour separation only. UNDER NO CIRCUMSTANCES SHOULD THIS ARTWORK BE ALTERED WITHOUT PRIOR PERMISSION FROM TRIDENT. Dieline Guides Technical & Non Printing Items TR1953076 17/08/2020 G Michelle Hays Colours: Master Ref: TR Ref: Brand: Brand execution: Product name: Article Number: Region: Template Ref: Artwork 12NC: Die cut 12NC: Barcode: CRC Number: Action: Date: 1 Black LTH 27 0102 03 05 04 10 11 060708 09 16 17 1213 14 15 22 23 18 19 20 21 28 29 24 2526 30 35 36 31 3233 34 4404 029 11882 www.philips.com/lighting www.philips-hue.com Last update: 08/2020 © 2020 Signify Holding EN - SAFETY INSTRUCTIONS - PART B Safety instructions Consignes des sécurité Instrucciones de seguridad HO ² FR - CONSIGNES DES SÉCURITÉ - PARTIE B Signify North America Corporation 200 Franklin Square Drive Somerset, NJ 08873, USA Signify Canada Ltd./Signify Canada Ltée. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Questions or Comments Questions ou commentaires 1-800-555-0050 Importado y/o distribuido en México por: Signify Mexico S.A. de C.V. Av. La Palma N° 6-Col. San Fernando, La Herradura Huixquilucan Edo. De México, C.P. 52784 - R.F.C. PME-620620-E84 Centro de contacto 01-800-508-9000 The manufacturer advises the correct use of Luminaires (lighting fixtures)! Therefore always follow these instructions to ensure correct and safe installation and functioning of the luminaire and keep it for future reference.Turn off electrical power at main fuse or circuit breaker box before commencing installation, maintenance or repair. If in doubt, consult a qualified electrician or contact your retail outlet. Ensure that you always install the luminaire to the local electrical code. Certain regulations indicate that luminaires should be installed by a qualified electrician. Observe the correct color of the wiring before installation: white (N), black (L) and green or bare copper wire (Ground). Do not connect this luminaire to a non-grounded electrical system.WARNING:Installing this fixture in a non-grounded electrical system could allow metal parts of the luminaire to carry electrical current if any wires or wire connections become broken or loose. Under this condition, anyone coming in contact with the luminaire is subject to electric shock which could cause injury or death. Always use wire nuts/connectors rated for the correct gauge and number of wires used.CAUTION:Be certain that no bare wire strands are exposed outside of the wire nuts/connections (if applicable). Be careful not to damage or cut the wire insulation (covering) during installation. Do not permit wires to contact any sharp edges. Do not remove thermal insulation pad(s). Doing so will result in increased temperatures and possible risk of fire. Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents.Avoid liquid on all electrical parts. Always consider all the technical specifications of the luminaire.Verify the stated icons on the identification label on the luminaire and the icons that are shown in part A of your safety instructions.ATTENTION :Below you will find all the explanations with numeric reference to the icons respectively in front of these PART-B safety instructions. Applicable icons to your fixture are shown in PART-A safety instructions. 1) This product should only be installed indoors. 2) The product is suitable for outdoor usage. 3) Only suitable for dry locations. 4) Suitable for damp locations. 5) Suitable for wet locations. 6) Luminaire is suitable for base up mounting. 7) Luminaire is suitable for base down mounting. 8) Luminaire is suitable for horizontal mounting. 9) The luminaire is only suitable for fixing to the ceiling. 10) The luminaire is only suitable for fixing to the wall. 11) The luminaire is suitable for fixing to the wall and to the ceiling. 12) Always observe the minimum distance between the lamp and the surface being lit as indicated on the icon. 13) Free air space of at least 4 inches must be kept between top of shade and bottom of canopy. 14) Immediately replace a cracked or broken safety glass and use only manufacturer approved parts. 15) Strip the wire as indicated in the diagram. 16) Use heat-resistant cable for wiring the luminaire into the mains. 17) MAX. ... W: only use lamps suitable for this luminaire and keep within the maximum specified wattage. 18) This product is not suitable for children under 14 years. 19) The Luminaire has a ground conductor identified with green insulation or bare copper wire. 20) The luminaire is only suitable for a lamp with built-in safety or a low pressure lamp. An extra safety glass is not necessary. 21) The luminaire is equipped with a fuse. If the luminaire is out of order after the bulb has been replaced, the internal fuse has to be replaced. If contact with the internal wiring can be made during this operation, this should be done by a competent electrician. 22) The luminaire can be used with a dimming circuit. Consult a qualified electrician for choosing the right type (especially important for low voltage luminaires). 23) The Luminaire cannot be used with a dimming circuit. 24) The luminaire is dimmable with the supplied dimmer ONLY. Do not connect to an additional dimmer. 25) The dimmability features depend on the chosen lamp. More information on the dimmability features is available in the information pack provided with the bulb. 26) Luminaire with time and light setting options. Minimum and maximum will be shown in the icon in part A. 27) The luminaire can be placed at a maximum of 20ft height. 28) To reach an optimal working, you have to place the lumin…

Text truncated - open the document above for the full version.

Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 1 of 2 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X Model: 9290031348 Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 2 of 2 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X

The label is added on edge of metal heat diffuser. Classified Label Position Model name: 9290031345 FCC ID: 2AGBW9290031345X IC: 20812-31345X Made in China Model name: 9290031346 FCC ID: 2AGBW9290031346X IC: 20812-31346X Made in China Classified Label : Position Model name: 9290031347 FCC ID: 2AGBW9290031347X IC: 20812-31347X Made in China Model name: 9290031348 FCC ID: 2AGBW9290031348X IC: 20812-31348X Made in China

Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 1 of 5 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X Model: 9290031348 Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 2 of 5 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 3 of 5 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 4 of 5 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X Photos Documentation Application: Signify (China) Investment Co., Ltd. Page 5 of 5 Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X Bluetooth and Zigbee Antenna position

Report No: 709502203708-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 3 Rev. 171.00 MPE Calculation Applicant:Signify (China) Investment Co., Ltd. Address:Building no.9, Lane 888, Tianlin Road, Minhang District Shanghai, 200233 China Product: LED light FCC ID: 2AGBW9290031348X Model No.: 9290031348 Reference RF report # 709502203708-00A, 709502203708-00B According to subpart 15.247(i), KDB 447498 D01 General RF Exposure Guidance v06 and subpart §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1,500 / / f/1500 30 1,500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Report No: 709502203708-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 3 Rev. 171.00 Calculated Data: Integral PCB Antenna for Bluetooth 5.0 LE and Zigbee, there only one Antenna ports, so it is not necessary consider simultaneous transmission. For BT 5.0 LE Maximum peak output power at antenna input terminal (dBm): 8.06 Maximum peak output power at antenna input terminal (mW): 6.40 tune-up conducted power(dBm):9.06 tune-up conducted power(mW):8.05 Prediction distance (cm): 20 Antenna Gain, typical (dBi): 0.59 Maximum Antenna Gain (numeric): 1.15 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.002 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 Note: The tune-up tolerance is 1dB was declared by the manufacturer. The max power density 0.002 (mW/cm 2 ) < 1.0 (mW/cm 2 ) Result: Compliant Report No: 709502203708-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 3 Rev. 171.00 For Zigbee Maximum peak output power at antenna input terminal (dBm): 8.15 Maximum peak output power at antenna input terminal (mW): 6.53 tune-up conducted power(dBm):9.15 tune-up conducted power(mW):8.22 Prediction distance (cm): 20 Antenna Gain, typical (dBi): 0.59 Maximum Antenna Gain (numeric): 1.15 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.002 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 Note: The tune-up tolerance is 1dB was declared by the manufacturer. The max power density 0.002 (mW/cm 2 ) < 1.0 (mW/cm 2 ) Result: Compliant - TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reviewed by: Prepared by:Tested by: _____________________ ___________________________________________ Hui TONGZhining ZHANGChengjie GUO EMC Section ManagerEMC Project EngineerEMC Test Engineer Date: Jan. 26, 2022 Date: Jan. 26, 2022 Date: Jan. 26, 2022

Report Number: 709502203708-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 70 Rev. 20.00 FCC/ISED - TEST REPORT Report Number:709502203708-00ADate of Issue:January 26, 2022 Model:9290031348 Product Type:LED light Trademark:PHILIPS FCC ID::2AGBW9290031348X IC::20812-31348X Applicant:Signify (China) Investment Co., Ltd. Address: Building no.9, Lane 888, Tianlin Road, Minhang District Shanghai, 200233 China Production Facility:Ningbo Klite Electric Manufacture Co., Ltd Address: No.5 Dapu River, Beilun, 315800 Ningbo PEOPLE'S REPUBLIC OF CHINA Test Result: Positive Negative Total pages including Appendices:70 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 709502203708-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 70 Rev. 20.00 1 Table of Contents 1Table of Contents....................................................................................................................2 2Details about the Test Laboratory ...........................................................................................3 3Description of the Equipment under Test................................................................................4 4Summary of Test Standards ...................................................................................................6 5Summary of Test Results........................................................................................................7 6General Remarks ....................................................................................................................8 7Test Setups .............................................................................................................................9 8Systems test configuration ....................................................................................................12 9Technical Requirement .........................................................................................................13 9.1Conducted Emission ......................................................................................................13 9.2Conducted peak output power .......................................................................................16 9.36dB bandwidth and 99% Occupied Bandwidth ..............................................................22 9.4Power spectral density ...................................................................................................32 9.5Spurious RF conducted emissions .................................................................................37 9.6Band edge ......................................................................................................................55 9.7Spurious radiated emissions for transmitter ...................................................................59 10Test Equipment List ...........................................................................................................67 11System Measurement Uncertainty.....................................................................................68 12Photographs of Test Set-ups .............................................................................................69 13Photographs of EUT ..........................................................................................................70 Report Number: 709502203708-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 70 Rev. 20.00 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name:TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch No.16 Lane, 1951 Du Hui Road, Shanghai 201108, P.R. China Telephone:+86 21 6141 0123 Fax:+86 21 6140 8600 FCC Registration No.: 820234 FCC Designation Number: CN1183 ISED#:25988 CAB identifierCN0101 Report Number: 709502203708-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 4 of 70 Rev. 20.00 3 Description of the Equipment under Test Description of the Equipment Under Test Product:LED light Model no.:9290031348 FCC ID:2AGBW9290031348X IC:20812-31348X Options and accessories: metal can Rating:120 Vac, 60Hz RF Transmission Frequency:2402~2480MHz for BT 5.0 LE No. of Operated Channel:40 for Bluetooth Bluetooth Working Frequency of Each C…

Text truncated - open the document above for the full version.

Report Number: 709502203708-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 38 Rev. 20.00 FCC/ISED - TEST REPORT Report Number:709502203708-00BDate of Issue:January 26, 2022 Model :9290031348 Product Type:LED light Trademark:PHILIPS FCC ID::2AGBW9290031348X IC::20812-31348X Applicant:Signify (China) Investment Co., Ltd. Address:Building no.9, Lane 888, Tianlin Road, Minhang District Shanghai, 200233 China Production Facility:Ningbo Klite Electric Manufacture Co., Ltd Address:No.5 Dapu River, Beilun, 315800 Ningbo PEOPLE'S REPUBLIC OF CHINA Test Result: Positive Negative Total pages including Appendices :38 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 709502203708-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 38 Rev. 20.00 1 Table of Contents 1Table of Contents....................................................................................................................2 2Details about the Test Laboratory ...........................................................................................3 3Description of the Equipment under Test................................................................................4 4Summary of Test Standards ...................................................................................................5 5Summary of Test Results........................................................................................................6 6General Remarks ....................................................................................................................7 7Test Setups .............................................................................................................................8 8Systems test configuration ....................................................................................................11 9Technical Requirement .........................................................................................................12 9.1Conducted Emission ......................................................................................................12 9.2Conducted peak output power .......................................................................................15 9.36dB bandwidth and 99% Occupied Bandwidth ..............................................................17 9.4Power spectral density ...................................................................................................21 9.5Spurious RF conducted emissions .................................................................................23 9.6Band edge ......................................................................................................................28 9.7Spurious radiated emissions for transmitter ...................................................................30 10Test Equipment List ...........................................................................................................35 11System Measurement Uncertainty.....................................................................................36 12Photographs of Test Set-ups .............................................................................................37 13Photographs of EUT ..........................................................................................................38 Report Number: 709502203708-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 38 Rev. 20.00 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name:TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch No.16 Lane, 1951 Du Hui Road, Shanghai 201108, P.R. China Telephone:+86 21 6141 0123 Fax:+86 21 6140 8600 FCC Registration No.: 820234 FCC Designation Number: CN1183 ISED#:25988 CAB identifierCN0101 Report Number: 709502203708-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 4 of 38 Rev. 20.00 3 Description of the Equipment under Test Description of the Equipment Under Test Product:LED light Model no.:9290031348 FCC ID:2AGBW9290031348X IC:20812-31348X Options and accessories:6′′ metal can Rating:120 Vac, 60Hz RF Transmission Frequency: 2405-2480MHz for Zigbee No. of Operated Channel:16 Zigbee Working Frequency of Each Channel: Channe…

Text truncated - open the document above for the full version.

Application: Signify (China) Investment Co., Ltd. Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X 2022 Not to be reproduced, except in its entirety,Page 1 of 3 without the Permission of TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch PHOTOGRAPHS OF TEST SET UP AC Power Line Conducted Emission Test Setup Field Strength and Harmonics Test Setup Radiated Emission Setup 9kHz ~ 30MHz Application: Signify (China) Investment Co., Ltd. Product: LED light FCC ID: 2AGBW9290031348X IC: 20812-31348X 2022 Not t…

Text truncated - open the document above for the full version.