2AGCDJACSJL003Tablet with NFC, WiFi and Bluetooth

Date: 2022-10-09 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The JACS Solutions, Inc., the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the JACS Solutions, Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AGCDJACSJL003 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the JACS Solutions, Inc. in connection with the Application shall have the same effect as acts of the JACS Solutions, Inc.. JACS Solutions, Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name: Candy Zhang Title: Treasurer Tel: (410) 493-6718 Email: [email protected] Company name: JACS Solutions, Inc. JACS Solutions, Inc. 809 Pinnacle Drive, STE R, Linthicum Heights, MD 21090

JACS Solutions, Inc. 809 Pinnacle Drive, STE R, Linthicum Heights, MD 21090 Date:2022-10-09 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AGCDJACSJL003 To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act, JACS Solutions, Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give JACS Solutions, Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM 5 Tune-up SHORT-TERM 6 External Photos 7 Internal Photos 8 Test-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: JACS Solutions, Inc. 809 Pinnacle Drive, STE R, Linthicum Heights, MD 21090 Contact name : Candy Zhang Title: Treasurer Tel: (410) 493-6718 Email: [email protected] Company name : JACS Solutions, Inc.

JACS Solutions, Inc. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID:2AGCDJACSJL003 (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2452 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Name and surname of applicant (or authorized representative): Wendy Zhan Position: Certification Director

JACS Solutions, Inc. 809 Pinnacle Drive, STE R, Linthicum Heights, MD 21090 Supplier’s Declaration Of Conformity for the FCC SDoC Procedure The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 : Product Name: Tablet Brand Nam: N/A Model Number: TR810 Report Number: SZ22090340E01 FCC ID: 2AGCDJACSJL003 It’s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States: Company Name: JACS Solutions, Inc. Company Address: 809 Pinnacle Drive, Suite R, Linthicum Heights, MD 21090, US Telephone: (410) 493-6718 Fax: 1 866-723-3050 Person is responsible for marking this declaration: Candy Zhang Treasurer ____________________________________ ______________________________________ Name (Full name ) Position / Title 2022-10-09 ____________________________________ ______________________________________ Legal Signature Date

FCC ID: 2AGCDJACSJL003 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

1、 Label 2、 Label location(on the back)

FCC ID: 2AGCDJACSJL003 Internal Photos 1. EUT uncover view 2. Antenna view FM Antenna RFID(RX) TAG Antenna WIFI Antenna1 BT/WIFI Antenna0 WPC(RX) And NFC Antenna

1/12 有力 ® 深圳有力科技有限公司 ShenzhenPowerfulTechnologyCo.,Ltd. Acknowledgementofantenna Customername ShenzhenJianyidaElectronicTechnologyCo., Ltd. Material name 2.4G/5GWiFi antenna Customeritem number 424-00007-0351 Material number YL1157-A0 Material type SolderPCBcoaxial line project HL003 version number V2.0 Material color black Sampling quantity 1PCS date 2022-1009 Isit environmenta llyfriendly yes Material description WIFIantenna,coaxialweldedPCBhardboard,sharedby2.4Gand5G,IPEX-1L=50MMwire diameter1.13black Supplierconfirmation organizationcompileconfirmapprove sign date Customerconfirmation organizationmanagerqualityapprove sign date Provideaname:ShenzhenPowerfulTechnologyCo.,Ltd. Provideaddress:ShenzhenNanshanDistrictHigh-techMiddleRoadWanheMedicinePark BuildingA Telephone:0755-86717102 2/12 深圳有力科技有限公司 ShenzhenPowerfulTechnologyCo.,Ltd. catalogue 1、frontcover 2、catalogue 3、drawing 4、 Antennamountingposition 5、Descriptionofelectricalandmechanicalproperties 6、Full-sizemeasurementreport 7、Saltspraytest 8、package 3/12 4/12 深圳有力科技有限公司 ShenzhenPowerfulTechnologyCo.,Ltd. Descriptionofantennamountingposition Description: 1.ThepositionshowninthefigurebelowisthemountingpositionofYL1157 2.4G/5GWiFiantenna. 5/12 5.1electricalperformance 5.1-1Specifications:YL1157-WiFiantenna:2.4G/5GWiFiantenna, 1stgenerationRFterminalweldedPCBantennaboard,IPEX-IL=50MM wirediameter.1.13. 5.2-2Testsettings: Standingwaveratio(SWR)testingdevicesareconnectedasfollows: E5071Bnetworkanalyzer→50ohmcoaxialCable→150mmlongcopper pipe→testfixture.Treatmentoftestfixture:leadSMA-Jconnector fromthe50ohmtestpointofantennaontheequipmentwithahard cable,connectitwiththecoppertubewithchokecoil,andthen connectitwithotherdevicesinturn.。 5.2-3Technicalspecifications: 频率范围 FrequencyRange （MHz） 2400-2500MHz 5150-5850MHz 最大增益 MaxGain [email protected] [email protected] 驻波比 VSWR/500hms ≤2.0 输入阻抗 Impedance 50Ω 接头 Termination 1generationterminal1.13blacklineL=50mm Workingtemperature （°C） -30~+65 6 / 12 5.2-4Testphysicaldrawingof equipment: Please refer to 'Antenna set up photo' for details. 7/12 5.2-5-Trp&tistestresult： 2.4GTRP TestWifi2.4GTRP Result1713 Frequency(MHz)241224422472 TRP(dBm)12.2614.4414.2 2.4GTis TestWifi2.4GTIS Result1713 Frequency(MHz)241224422472 TIS(dBm)-79.42-78.23-78.79 5GTRP TestWifi5GTRP Result3064161 Frequency(MHz)518053205805 TRP(dBm)16.658.0312.6 5GTIS TestWifi5GTIS Result3664161 Frequency(MHz)518053205805 TIS(dBm)-88.72-84.9-84.72 8/12 5.2-6-Passivetestresults： PassiveTestFor2.4G FreqEffiGain (MHz)(%)(dBi) 240072.363.25 240578.683.31 241063.323.2 241563.492.66 242064.223.12 242563.373.22 243053.013.14 243562.083.34 244065.613.12 244559.22.95 245051.912.73 245561.213.01 246063.423.17 246560.793.29 247049.542.5 247558.123.66 248063.132.65 248557.672.66 2490502.84 249555.232.74 250067.433.3 9/12 PassiveTestFor5G FreqEffiGain (MHz)(%)(dBi) 515060.782.61 520064.063.92 525068.913.56 530061.543.81 535060.513.56 540050.962.95 545049.252.65 550044.272.92 555056.733.89 560060.983.75 565072.684.38 570066.064.33 575075.863.07 580071.234.43 585075.034.22 10/12 深圳有力科技有限公司 ShenzhenPowerfulTechnologyCo.,Ltd. Samplesizetestreport client ShenzhenJianyida ElectronicTechnology Co.,Ltd. productname 2.4G/5GWiFitype supplier/ProductnumberYL1157-A0 versionA0unitmm project standard measure resul t instrum ent 12345 1 exterior Bad phenomenon OKOKOKOKOKOK visual figure ★10.00±0.1510.0510.1010.0210.0310.02OKPM ★36.60±0.1536.6236.6536.5836.6736.60OKPM ★50.00±2.0050.2050.3050.1550.0550.15OKPM Thefollowingblanks decide:OK■NG□ Briefdescriptionofappearancedefects: A—copperleakage,B—wrinkle,C—scratch,D—colormixing,E—adhesivebacking,F—color difference,G—virtualwelding,H—dirt,I—holepositionskew,J—flaring,K—indentation,L— deformation,L—shrinkage,N—brokenfoot,O—whitetop,P—corrosion,Q—poorelectroplating, R—nobump.Testinginstrumentabbreviation:PG-plug(roundhole)gauge,RG-Rgauge,SG-blockgauge, LG-ringgaugeDC—-digitalcaliperPM—-secondarycoordinateprojectorversion:A.0. Inspection:ZhaoXuanxuanAudit:QiuXing 11/12 深圳有力科技有限公司 ShenzhenPowerfulTechnologyCo.,Ltd. Saltspraytest Date:August19th,2020 name YL11572.4G/5GWiFi Customername ShenzhenJianyidaElectronic TechnologyCo.,Ltd. supplier ShenzhenPowerful TechnologyCo.,Ltd. national standard GB/T2423.2-2008 Samplesituation Samplequantity：5PCS Basematerial:FR4black Surfacetreatment:osp Testduration 24h Testtype: ■NSS□ASS□CASS testcondition Salt:5% PH:7.0 Temperatureinthecabinet:35° Relativehumidity: 85% Spraymode:■continuously□intermissionCompressedairpressure: 1kg/cm² Saltspraysedimentationrate:1-2ml/80cm2/h Liquidcollection: 1.4ml/80cm2/h Testperiod:1cycle.Spraytime:24h testresult Appearanceafterthetest:theappearanceisintactandhasno obviouschange. Nopeelingandcorrosiononthesurface. Surfacesprayingandsilkscreenprinting:nopeelingandno bubbles. Description: 1.thesaltspraytestoperationstandardisinaccordancewithPeople'sRepublicofChina(PRC)nationalstandard GB/T2423.17-2008. 2.2.ThejudgmentstandardoftestpieceresultsshallbeinaccordancewiththenationalstandardGB/T6461-02of People'sRepublicofChina(PRC). ester/Date:ZhaoXuanxuanAudit/Date:QiuXing 12/12 深圳有力科技有限公司 ShenzhenPowerfulTechnologyCo.,Ltd. Package Generalrequirements: 1.Statethecustomername,projectnameandmodel. 2.Thepictureshowstheinnerandouterboxes,thepackingmethodwhen shipping,thenumberoflayers,thenumberofsinglelayers,etc. 3.Fillinthenameandquantityofpackingmaterialsintheremarkscolumn. 1:PEself-sealingbagpacks2:Putapartitionatthebottom abagof100PCS/200pcs.ofthecartoonboxfirst. 3:Shapeofouterpackingbox4.Labeling Material number: YL1157-WIFI Name:2.4G/5.8G-WiFi version： A1 PEbag+outerbox outsideinside 4000PCS

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 24 REPORT No.：SZ22090340W05 TEST REPORT APPLICANT : JACS Solutions, Inc. PRODUCT NAME : Tablet MODEL NAME :TR810 BRAND NAME : N/A FCC ID :2AGCDJACSJL003 STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2022-10-13 TEST DATE :2022-10-19 to 2022-11-08 ISSUE DATE :2022-11-15 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 24 REPORT No.：SZ22090340W05 DIRECTORY 1. Technical Information ····················································································· 3 1.1. Applicant and Manufacturer Information ························································ 3 1.2. Equipment Under Test (EUT) Description ······················································· 3 1.3. Test Standards and Results ·········································································· 5 1.4. Environmental Conditions ············································································ 5 2. 47 CFR Part 15C Requirements ······································································· 6 2.1. Antenna Requirement ·················································································· 6 2.2. Conducted Emission ··················································································· 7 2.3. Radiated Emission ····················································································· 11 2.4. Frequency Tolerance ·················································································· 18 2.5. 20 dB Bandwidth ························································································ 20 Annex A Test Uncertainty ················································································ 22 Annex B Testing Laboratory Information ··························································· 23 Change History Version Date Reason for change 1.0 2022-11-15 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 24 REPORT No.：SZ22090340W05 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: JACS Solutions, Inc. Applicant Address: 809 Pinnacle Drive, Suite R, Linthicum Heights, MD 21090, United States Manufacturer: JACS Solutions, Inc. Manufacturer Address: 809 Pinnacle Drive, Suite R, Linthicum Heights, MD 21090, United States 1.2. Equipment Under Test (EUT) Description Product Name: Tablet Sample No.: 1# Hardware Version: TR810 JACS V1.0.0 Software Version: TR810 JACS V1.0.0 Operating Frequency: 13.56MHz Modulation Type: ASK Antenna Type: FPC Antenna Accessory Information: Battery Brand Name: DONGGUAN ENCORE ENERGY CO.,LTD Model No.: 72104114 Serial No.: N/A Capacity: 8000mAh Rated Voltage: 3.7V Charge Limit: 4.2V Manufacturer: DONGGUAN ENCORE ENERGY CO.,LTD MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 24 REPORT No.：SZ22090340W05 Accessory Information: AC Adapter Brand Name: Shenzhen Candour Co.,Ltd Model No.: BCT050200-078ED Serial No.: N/A Rated Output: 5V2A Rated Input: 100-240V50/60Hz, 0.3A Manufacturer: Shenzhen Candour Co.,Ltd Note 1: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 24 REPORT No.：SZ22090340W05 1.3. Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart C for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 15 (10-1-15 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 15.207 Conducted Emission Nov. 07, 2022 Wu Zhaoling PASS No deviation 3 15.209 15.225(a) (b) (c)(d) Radiated Emission Nov. 08, 2022 Gao Jianrou PASS No deviation 4 15.225(e) Frequency Tolerance Oct. 19, 2022 Zhong Yanshan PASS No deviation 5 15.215(c) 20dB Bandwidth Nov. 08, 2022 Gao Jianrou PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2013. The EUT has been tested under continuous operating condition. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific…

Text truncated - open the document above for the full version.

FCC ID: 2AGCDJACSJL003 Test Setup Photos 1. Conducted emission main’s port front view 2. Conducted emission main’s port side view 3. Radiated emission (9KHz-30MHz) 4. Radiated emission (30MHz-1GHz) 5. Radiated emission (above 1GHz) 6. RF measurement setup (NFC)

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22090340S01 Annex B Test Setup Photos  Antenna Location MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22090340S01  Body Bottom Surface (Test Distance 0mm) Edge 1 (Test Distance 0mm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22090340S01 Edge 4 (Test Distance 0mm)

Test physical drawing of equipment