2AGGZ003B9ACA4ALi-ion 1.1Nm ARC Motor

Li-ion & DC Motor MOTOR PROGRAMMING INSTRUCTIONS SOFT STOP SOLAR OPTION FAVORITE POSITION SELECTABLE SPEED BATTERY POWERED USB CHARGE (Only for Li-ion Motor) ELECTRONIC LIMIT LEVEL CONTROL BATTERY CHECK433 MHZ BI-DIRECTIONAL AUTOMATE 5V ZERO & WIREFREE V1.0_PRGM_JULY_2022 Fav Position Live Feedback Energy ecient 2 | Automate ™ Programming Instructions | Li-ion & DC Motors ROLLEASE ACMEDA SAFETY INSTRUCTIONS WARNING: Important safety instructions to be read before installation. Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty. WARNING: Important safety instructions to be read before installation and use. It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference. WARNING: Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty. • Read and follow all installation and safety instructions. • This manual is also available on the website. • Do not expose to water, moisture, humid and damp environments or extreme temperatures. • Use or modification outside the scope of this instruction manual will void warranty. • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision. • Do not allow children to play with fixed controls. Keep appliance and remote controls away from children. • Assembly, installation and programming must be performed by a suitably qualified installer. • For use with motorized shading devices. • Frequently inspect the installation for improper operation, signs of wear, imbalance or damage to cables or springs. Do not use if repair or adjustment is necessary. • The appliance must be disconnected from its power source during cleaning, maintenance or when replacing parts. Maintenance and parts replacement should be performed by a suitably qualified installer/technician. • The A-weighted emission sound pressure level of the appliance is less than or equal to 70dB(A). • The appliance is for indoor use only. • Disconnect the appliance from power or switch off automatic controls when maintenance, such as window cleaning, is being carried out in the vicinity. • The appliance must be supplied only the safe, extra-low voltage corresponding to the marking on the appliance. • Keep clear of the appliance when in operation. • There are no user serviceable parts or batteries inside the appliance. • Remote batteries should be replaced with the correctly specified type only. • The mass and dimensions of the driven part must be compatible with the rated torque and rated operating time of the appliance. • The driven part must be compatible with the rated torque and operating time of the appliance as follows: For 0.5Nm motor series (MT01-1320-069001 and similar): Rated torque of 0.5Nm, rated operating time of 12 minutes and minimum tube diameter of ø20mm. For 1.1Nm motor series (MT01-1325-069002, MT01-1225-069002 and similar): Rated torque of 1.1Nm, rated operating time of 12 minutes and minimum tube diameter of ø25mm. For 2.0Nm motor series (MT01-1328-069001, MT01-1228-069002 and similar): Rated torque of 2.0Nm, rated operating time of 12 minutes and minimum tube diameter of ø28mm. • Fixed controls have to be clearly visible after installation. • The appliance is intended to be installed at a height of at least 2.5m above the floor or any other accessible level surface. • Before installing the appliance, remove any unnecessary cords or components and disable any equipment not needed for powered operation. ROLLEASE ACMEDA Automate ™ Programming Instructions | Li-ion & DC Motor s | 3 COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interfer ence, and (2) this device must accept any interfer ence received, including interfer ence that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’e xploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Changes or modifications not expressl y approved by the party responsible for compliance could void the user’s authority to operat e the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prot ection against harmful interfer ence in a residential installation. This equipment generat es uses and can radiate radio frequency energy and, if not installed and used in accor dance with the instructions, may cause harmful interfer ence to radio communications. However, there is no guarantee that interfer ence will not occur in a particular ins tallation. If this equipment does cause harmful interfer ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer ence by one or more of the following measures: - Reorient or rel ocat e the receiving antenna. - Increase the separation between the equipment and receiver . - Connect the equipment into an outlet on a circuit differ ent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC / IC RF exposure requirements, a s…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Rollease Acmeda Inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05- 29-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AGGZ003B9ACA4A Rollease Acmeda Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant signature: Applicant printed name: Jonny.Matuichuk

Rollease Acmeda Inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-29-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AGGZ003B9ACA4A Rollease Acmeda Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant signature: Applicant printed name: Jonny.Matuichuk

Rev 1/26/2023 Rollease Acmeda Inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-29-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AGGZ003B9ACA4A Rollease Acmeda Inc. certifies that, as of the date of the filing of the application, we designate ourselves as the U. S. agent for service of process. Designated U.S. Agent Information: FRN: 0025043381 Name: Rollease Acmeda Inc Address: 7th Floor / 750 East Main Street,Stamford, CT 06902, USA Contact Person: Jonny.Matuichuk Tel.: 2034906191 Email: [email protected] Sincerely, Jonny.Matuichuk

Rollease Acmeda Inc Date: 2023-05-29 To: Federal Communications Commission 7435 Oakland Mills Road Columbia MD FCC ID: 2AGGZ003B9ACA4A To Whom It May Concern: This letter is to ascertain that Rollease Acmeda Inc Product name: Li-ion 1.1 ARC Motor, Model: MT01-1325-069001-S, MT01-1325-069002-S, MT01-1325-069003-S, MT01-1325-069005-S,MT01-1325-069015-S, MT01-1325-069018-S, MT01-1325-069019-S and MT01-1325-069020-S have been the units used for conducting FCC compliance testing, the SDoC part will be tested by FCC recognized test lab. If you have any question or concerns, please contact us. Sincerely, Signature Company name: Rollease Acmeda Inc Address: 7th Floor / 750 East Main Street,Stamford, CT 06902, USA E- mail: [email protected] Tel: 2034906191 Printed Name: Jonny.Matuichuk

Rev 11/20/07 Rollease Acmeda Inc Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AGGZ003B9ACA4A . Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operation description) (Block Diagram, Schematics, Operation description.pdf”) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Internal Photos, Test Setup Photos, User manual) (Internal Photos, Test Setup Photos, User manual.pdf”) Number of days: 180 days Sincerely, (signature) (printed name) Jonny.Matuichuk

C:\Users\jonny.matuichuk\Downloads\Certification\1325\FCC POA _Letter.docx Rollease Acmeda Inc Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: May 29,2023 SUBJECT: FCC Application for FCC ID: 2AGGZ003B9ACA4A To Whom It May Concern: We, the undersigned, hereby authorize Yu Anlu at TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Printed Name: Jonny.Matuichuk Signature：

1 of 1 To whom it may concern, Letter of Declaration We, Rollease Acmeda Inc, hereby declare the models below: Model(S): MT01-1325-069001-S, MT01-1325-069002-S, MT01-1325-069003-S, MT01-1325-069005-S, MT01-1325-069015-S, MT01-1325-069018-S, MT01-1325-069019-S, MT01-1325-069020-S FCC ID: 2AGGZ003B9ACA4A IC ID: 21769-003B9ACA4A are identical in electrical and mechanical construction except for the model number, length, number of batteries, and end-cap adaptor as per the below table: For the end cap adaptor, the only change is the adaptor’s profile as shown in the below photos: Print name: Jonny Matuichuk Title: Product Manager Signature /Date: Item no RA Code Description #of Battery Speed Length 1 MT01-1325-069001-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/20rpm (Skyl i ne-SHORT) 2 Battery 20-28 rpm 479mm 2 MT01-1325-069005-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/20rpm (S45-SHORT) 2 Battery 20-28 rpm 479mm 3 MT01-1325-069002-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/20rpm (Skyl i ne) 3 Battery 20-28 rpm 552 mm 4 MT01-1325-069003-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/20rpm (S45) 3 Battery 20-28 rpm 552 mm 5 MT01-1325-069015-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/28rpm] (Skyl i ne) 3 Battery 28 rpm 552 mm 6 MT01-1325-069018-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/28rpm] (Louvol i te) 3 Battery 28 rpm 552 mm 7 MT01-1325-069019-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/28rpm] (S45) 3 Battery 28 rpm 552 mm 8 MT01-1325-069020-S AUTOMATE | LI-ION 1.1Nm ARC Motor [Ø25/5V/28rpm (UNV) 3 Battery 28 rpm 552 mm 25mm Li-ion Motor Adaptor 25/05/2023

External Photos Documentation Applicant: Rollease Acmeda Inc Page 1 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069001-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 2 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 3 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069005-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 4 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 5 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069003-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 6 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 7 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 8 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069002-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 9 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 10 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069019-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 11 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 12 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 13 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069015-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 14 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 15 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069018-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 16 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 17 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Model: MT01-1325-069020-S External Photos Documentation Applicant: Rollease Acmeda Inc Page 18 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A External Photos Documentation Applicant: Rollease Acmeda Inc Page 19 of 19 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A

Label & Location Label position Label

Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 1 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A MT01-1325-069001-S Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 2 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 3 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 4 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 5 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 6 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 7 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 8 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 9 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A MT01-1325-069002-S Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 10 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 11 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 12 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 13 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 14 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 15 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 16 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 17 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A MT01-1325-069003-S Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 18 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 19 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 20 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 21 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 22 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 23 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 24 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 25 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A MT01-1325-069005-S Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 26 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 27 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 28 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 29 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 30 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 31 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 32 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 33 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A MT01-1325-069015-S Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 34 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 35 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Antenna for 433.92MHz Length:13cm±10mm Internal Photos Documentation Applicant: Rollease Acmeda Inc Page 36 of 64 Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A Internal Phot…

Text truncated - open the document above for the full version.

Report No: 709502303612-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 2 Rev. 20.00 MPE Calculation Applicant: Rollease Acmeda Inc Address: 7th Floor / 750 East Main Street,Stamford, CT 06902, USA Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A Model No.: MT01-1325-069001-S, MT01-1325-069002-S, MT01-1325-069003-S, MT01-1325-069005-S, MT01-1325-069015-S, MT01-1325-069018-S, MT01-1325-069019-S, MT01-1325-069020-S Reference RF report # 709502303612-00B Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1,500 / / f/1500 30 1,500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; Calculation method for 433.92MHz Report No: 709502303612-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 2 Rev. 20.00 For 433.92MHz. Field Strength (EMeas): 72.38(dBuV/m)=0.0042V/m (f=433.92 MHz) Measurement Distance(dMeas): 3 (m) Equivalent Isotropically Radiated Power(EIRP): 0.000005292W=0.005292mW According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); PG =0.005292mW (in appropriate units, e.g., mW); R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Calculated Data: The max power density 0.031827mW/4πR²= 1.0533*10 -6 (mW/cm 2 ) < 0.28928 (mW/cm 2 ) Result: Compliant - TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reviewed by: Prepared by: Tested by: _____________________ _____________________ ______________________ Hui TONG Jiaxi XU Cheng Huali EMC Section Manager EMC Project Engineer EMC Test Engineer Date: 2023-06-14 Date: 2023-06-14 Date: 2023-06-14

Report Number: 709502303612-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 24 Rev. 171.00 FCC/ISED TEST REPORT Report Number : 709502303612-00B Date of Issue: June 14, 2023 Model : MT01-1325-069001-S, MT01-1325-069002-S, MT01-1325-069003-S, MT01-1325-069005-S,MT01-1325-069015-S, MT01-1325-069018-S, MT01-1325-069019-S, MT01-1325-069020-S Product Type : Li-ion 1.1Nm ARC Motor Applicant : Rollease Acmeda Inc Address : 7th Floor / 750 East Main Street,Stamford, CT 06902, USA Production Facility : Ningbo Dooya Mechanic & Electronic Technology Co.,Ltd Address : No.168 Shengguang Road,Luotuo,Zhenhai,315202 Ningbo,Zhejiang Province, P.R. China. Test Result : ◼ Positive  Negative Total pages including Appendices : 24 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 709502303612-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 24 Rev. 171.00 1 Table of Contents 1 Table of Contents ................................................................................................................................................................... 2 2 Details about the Test Laboratory .......................................................................................................................................... 3 3 Description of the Equipment Under Test ............................................................................................................................. 4 4 Summary of Test Standards ................................................................................................................................................... 5 5 Summary of Test Results ....................................................................................................................................................... 6 6 General Remarks .................................................................................................................................................................... 7 7 Systems test configuration ..................................................................................................................................................... 8 8 Test Setups ............................................................................................................................................................................. 9 9 Test Methodology ................................................................................................................................................................ 11 9.1 Conducted Emission.................................................................................................................................................... 11 9.2 Radiated Emission ....................................................................................................................................................... 16 9.3 Bandwidth Measurement ............................................................................................................................................ 20 9.4 Deactivation Time ....................................................................................................................................................... 22 10 Test Equipment List ............................................................................................................................................................. 23 11 System Measurement Uncertainty ....................................................................................................................................... 24 Report Number: 709502303612-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 24 Rev. 171.00 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch No.16 Lane, 1951 Du Hui Road, Shanghai 201108, P.R. China Test Firm FCC Registration Number: Designation number: 820234 CN1183 IC Company Number: CAB identifier: 25988 CN0101 Telephone: +86 21 6141 0123 Fax: +86 21 6140 8600 Report Number: 709502303612-00B EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 4 of 24 Rev. 171.00 3 Description of the Equipment Under Test Product: Li-ion 1.1Nm ARC Mot…

Text truncated - open the document above for the full version.

Applicant: Rollease Acmeda Inc Product: Li-ion 1.1Nm ARC Motor FCC ID: 2AGGZ003B9ACA4A IC: 21769-003B9ACA4A ©2023 Not to be reproduced, except in its entirety, Page 1 …

Text truncated - open the document above for the full version.