2AGGZMT011145017Electronic Limit-Tubular AC Motor

AUTOMATE ™ AX30/AX50 EXTERNAL SHADE MOTOR 433 MHZ BI-DIRECTIONAL ELECTRONIC LIMIT FAVORITE POSITION IMPACT DETECTION AUTOMATE | AX30/AX50 External Shade Motor combine the simple, intuitive features of ARC “Automate Radio Communication” with the higher lifting capacity of an AC motor for larger shade applications. INSTR.AX30/AX50 v0.6 SEP 2020 2 | Automate ™ Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA CONTENTS 1 ASSEMBLY 6 2 WIRING 7 2.1 EU/AU Motor 7 2.2 US Motor 7 3 P1 BUTTON FUNCTIONS 8 3.1 Motor state test 8 3.2 Motor configuration options 8 4 NONCASSETTE OPEN MODE 9 4.1 Initial Setup 9 4.1.1 Pair motor with controller 9 4.1.2 Check motor direction 9 4.2 Set Limits 10 4.3 Adjust Upper Limit 10 4.4 Adjust lower limit 11 4.5 Delete Upper/Lower Limits 11 5 CASSETTE MODE 12 5.1 Initial Setup 12 5.1.1 Pair motor with controller 12 5.1.2 Check motor direction 12 5.2 Select Motor Mode 13 5.3 Set Limits 13 5.4 Delete Upper/Lower Limits 14 5.4.1 Activate/Deactivate Upper Limit Fabric Tension 14 5.4.2 Activate/Deactivate Lower limit Fabric Tension 15 6 VERTICAL DROP MODE 16 6.1 Initial Setup 16 6.1.1 Pair motor with controller 16 6.1.2 Check motor direction 16 6.2 Select Motor Mode 17 6.3 Set Limits 17 6.3.1 Adjust upper limit 18 6.3.2 Adjust lower limit 18 6.3.3 Delete Upper/Lower Limits 19 6.4 Impact Detection (Only available with Zipscreen) 19 3 | Automate ™ Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA CONTENTS 6.4.1 Active/Deactivate Impact Detection Mode 20 7 ADD CONTROLLER AND CHANNEL 21 7.1 Using P2 Button on existing controller to add a new controller or channel 21 7.2 Using a pre-existing controller to add or delete a controller or channel 21 8 FAVORITE POSITIONING 22 8.1 Set a favorite position 22 8.2 Send shade to favorite position 22 8.3 Delete favorite position 22 9 SLEEP MODE 23 10 WIND SENSOR FUNCTION 23 10.1 Wind Sensor Prioritize Function 23 11 TROUBLE SHOOTING 24 4 | Automate ™ Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA SAFETY INSTRUCTIONS WARNING: Important safety instructions to be read before installation. Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty. • Do not expose to water, moisture, humid and damp environments or extreme temperatures • Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge should not be allowed to use this product. • Keep away from children. • Use or modification outside the scope of this instruction manual will void warranty. • Installation and programming to be performed by a suitably qualified installer. • For use with motorized shading devices. • Ensure correct crown and drive adapters are used for the intended system. • Keep antenna straight and clear from metal objects • Do not cut the antenna. • Follow Rollease Acmeda installation instructions. • Before installation, remove any unnecessary cords and disable any equipment not needed for powered operation. • Ensure torque and operating time is compatible with end application. • Motor is to be installed in horizontal application only. • The routing of cable through walls shall be protected by isolating bushes or grommets. • Ensure power cable and aerial is clear and protected from moving parts. • If cable or power connector is damaged do not use. • Route motor cable to create a drip loop • Frequently inspect for improper operation. Do not use if repair or adjustment is necessary. • Keep motor away from acid and alkali. • Do not force the motor drive. • Keep clear when in operation. It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference Rollease Acmeda declares this equipment is in compliance with the essential requirements and other relevant provisions of R&TT EC Directive 1999/5/EC 5 | Automate ™ Programming Instructions | AX30/AX50 External Shade Motor ROLLEASE ACMEDA SAFETY INSTRUCTIONS Do not dispose of in general waste. Please recycle batteries and damaged electrical products appropriately. Statement Regarding FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Statement Regarding IC Compliance 1. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Chang…

Text truncated - open the document above for the full version.

Model Difference Declaration Letter The difference between MT01-1145-069017 and MT01-1145-069018 is that the rated torque & rated speed and the corresponding motors; other control boards, strokes and internal motor structures are the same. 2020.12.8

FCC ID:2AGGZMT011145017 IC: 21769-MT011145017 External Picture FCC ID:2AGGZMT011145017 IC: 21769-MT011145017 FCC ID:2AGGZMT011145017 IC: 21769-MT011145017

Label & Label Location Label Location

FCC ID:2AGGZMT011145017 IC: 21769-MT011145017 Internal Picture FCC ID:2AGGZMT011145017 IC: 21769-MT011145017 FCC ID:2AGGZMT011145017 IC: 21769-MT011145017 FCC ID:2AGGZMT011145017 IC: 21769-MT011145017 FCC ID:2AGGZMT011145017 IC: 21769-MT011145017

Rollease Acmeda Inc SAR COMPLIANCE REPORT Report Type: IC SAR assessment report Model: MT01-1145-069017、MT01-1145-069018 REPORT NUMBER: 200800934SHA-002 ISSUE DATE: Sep 27, 2020 DOCUMENT CONTROL NUMBER: TTRFICSAR-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFICSAR-01_V1© 2018 Intertek Page 2 of 6 Report no.: 200800934SHA-002 Applicant: Rollease Acmeda Inc 750 East Main Street,7th Floor,Stamford Connecticut United States 06902 Manufacturer: Rollease Acmeda Inc 750 East Main Street,7th Floor,Stamford Connecticut United States 06902 Manufacturing site: Ningbo Dooya Mechanic&Electronic Technology Co.,Ltd NO.168 shengguang road Luotuo street Zhenhai District Ningbo,P.R.China IC: 21769-MT011145017 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: RSS-102: Issue 5 (March 2015) PREPARED BY: REVIEWED BY: Project Engineer Stephanie Zhang Reviewer Wakeyou Wang Report No.: 200800934SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 3 of 6 Revision History Report No. Version Description Issued Date 200800934SHA-002 Rev. 01 Initial issue of report Sep 27, 2020 Report No.: 200800934SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 4 of 6 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Electronic Limit-Tubular AC Motor Type/Model: MT01-1145-069017、MT01-1145-069018 Description of EUT: There are two models, they have different rated torque & rated speed, and the corresponding motors are different. Other control boards, strokes and internal motor structures are the same. MT01-1145-069017 was evaluated as representative in this report. Rating: 120Vac，60Hz,269W,2.4A;120Vac,60Hz185W,1.60A Category of EUT: Class B EUT type: Table top Floor standing Software Version: / Hardware Version: / Sample received date: 2020.9.01 Date of test: 2020.09.01~2020.09.25 1.2 Technical Specification Operation Frequency: 433.92MHz Type of Modulation: FSK Product Type: Mobile Portable Fix Location Channel Number: 1 Report No.: 200800934SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 5 of 6 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab Registration code No.: 2042B-1 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 NVLAP Accreditation Lab NVLAP LAB CODE: 200849-0 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 200800934SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 6 of 6 2 SAR Assessment Test result: Pass 2.1 SAR Test Exclusion Limit 2.2 Assessment Results The highest EIRP adjusted with tune-up tolerance is 97.90 dBuV/m, which is equivalent to 2.7dBm = 1.86mW < 52mW (Test Exclusion Thresholds of 450MHz at 5mm). Therefore, the SAR requirement is deemed to be satisfied without test.

Rollease Acmeda Inc RF TEST REPORT Report Type: FCC Part 15.231 & ISED RSS-210 RF report Model: MT01-1145-069017、MT01-1145-069018 REPORT NUMBER: 200800934SHA-001 ISSUE DATE: Sep 27, 2020 DOCUMENT CONTROL NUMBER: TTRF15.231_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.231_V1 © 2018 Intertek Page 2 of 29 Report no.: 200800934SHA-001 Applicant: Rollease Acmeda Inc 750 East Main Street,7th Floor,Stamford Connecticut United States 06902 Manufacturer: Rollease Acmeda Inc 750 East Main Street,7th Floor,Stamford Connecticut United States 06902 Manufacturing site: Ningbo Dooya Mechanic&Electronic Technology Co.,Ltd NO.168 shengguang road Luotuo street Zhenhai District Ningbo,P.R.China FCC ID: 2AGGZMT011145017 IC: 21769-MT011145017 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2019): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-210 Issue 10 (December 2019): Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS-Gen Issue 5 (April 2018): General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Stephanie Zhang Reviewer Wakeyou Wang Report No.: 200800934SHA-001 TEST REPORT TTRF15.231_V1 © 2018 Intertek Page 3 of 29 Content REVISION HISTORY................................................................................................................................................ 4 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 5 1 GENERAL INFORMATION ............................................................................................................................. 6 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 6 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 6 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 7 2 TEST SPECIFICATIONS ................................................................................................................................... 8 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 8 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 8 2.3 TEST SOFTWARE LIST ............................................................................................................................................ 8 2.4 TEST PERIPHERALS LIST ......................................................................................................................................... 8 2.5 TEST ENVIRONMENT CONDITION: ............................................................................................................................ 9 2.6 INSTRUMENT LIST .............................................................................................................................................. 10 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 11 3 FUNDAMENTAL & SPURIOUS EMISSION & RESTRICT BAND RADIATED EMISSION ...................................... 12 3.1 LIMIT .............................................................................................................................................................. 12 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 13 3.3 TEST CONFIGURATION ........................................................................................................................................ 14 3.4 TEST RESULTS OF RADIATED EMISSIONS ................................................................................................................. 16 4 POWER LINE CONDUCTED EMISSION ......................................................................................................... 21 4.1 LIMIT .............................................................................................................................................................. 21 4.2 TEST CONFIGURATION ........................................................................................................................................ 21 4.3 MEASUREMENT PROCEDURE ..............................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AGGZMT011145017 IC: 21769-MT011145017 Test Setup Radiated Emission 30M-1G FCC ID: 2AGGZMT011145017 IC: 21769-MT011145017 >1GHz FCC ID: 2AGGZMT011145017 IC: 21769-MT011145017 Conducted Emission FCC ID: 2AGGZMT011145017 IC: 21769-MT011145017 RF conducted emission test