2AHCR-S539V1Door Phone

2 About This Manual Thank you for choosing the Akuvox S539 series door phone. This manual is intended for administrators who need to properly configure the door phone. This manual applies to version 539.30.1.7, and it provides all the configurations for the functions and features of the S539 series door phone. Please visit the Akuvox forum or consult technical support for any new information or the latest firmware. 3 Introduction of Icons and Symbols Note:  Informative information and advice from the efficient use of the device. 4 Related Documentation You are advised to refer to the related documents for more technical information via the link below: https://knowledge.akuvox.com 5 Content 1. Product Overview .................................................................................................................. 12 2. Change Log........................................................................................................................... 13 3. Model Specification ............................................................................................................... 14 4. Introduction to Configuration Menu ........................................................................................ 17 5. Access the Device ................................................................................................................. 21 5.1. Access the Device Setting on the device ................................................................................ 21 5.2. Access the Device Setting on the Web Interface .................................................................... 23 6. Language and Time Setting ................................................................................................... 25 6.1. Language Setting .................................................................................................................... 25 6.1.1. Language Setting on the Device ............................................................................ 25 6.1.2. Language Setting on the Device Web Interface ..................................................... 25 6.2. Time Setting ............................................................................................................................ 29 6.2.1. Time Setting on the Device .................................................................................... 31 6.2.2. Time Setting on the Device Web Interface ............................................................ 33 7. LED&LCD Setting .................................................................................................................. 34 7.1. Infrared LED Setting................................................................................................................ 34 7.1.1. Infrared LED Setting on the Device ....................................................................... 34 7.1.2. Infrared LED Setting on the Web Interface ............................................................ 37 7.2. LED Setting on Card Reader Area .......................................................................................... 38 7.3. LCD Screen Brightness Setting .............................................................................................. 40 7.3.1. LCD Screen Brightness Setting on the Web Interface ........................................... 40 7.3.2. LCD Screen Brightness Setting on the Device ...................................................... 42 7.4. LED White Light Setting .......................................................................................................... 42 8. Screen Display Configuration ................................................................................................. 44 6 8.1. Screensaver Configuration ...................................................................................................... 44 8.1.1. Configure Screensaver on the Device ................................................................... 44 8.1.2. Configure Screensaver on the Web Interface ........................................................ 46 8.2. Upload Screensaver ............................................................................................................... 48 8.3. Upload Device Booting Image ................................................................................................. 50 8.4. Upload Device Contact List Background Image ...................................................................... 50 8.5. Home Screen Configuration .................................................................................................... 52 8.6. Configuration for Scenario-based Screen Display Mode ........................................................ 52 8.7. Villa Mode Home Screen Display ............................................................................................ 53 8.8. Building Mode Home Screen Display ...................................................................................... 55 8.9. Two-factor Authentication Mode Screen Display .................................................................... 57 8.10. Dial Key Order ...................................................................................................................... 57 8.10.1. Prompt Display .................................................................................................... 59 8.10.2. Open Door Text Prompt Display .......................................................................... 59 9. Volume and Tone Configuration ............................................................................................. 62 9.1. Volume Configuration.............................................................................................................. 62 9.1.1. Configure Volume on the Device ........................................................................... 62 9.1.2. Configure Volume on the Web Interface ...........…

Text truncated - open the document above for the full version.

AKUVOX (XIAMEN) NETWORKS CO., LTD. Add: 10/F, No.56 Guanri Road, Software Park II, Xiamen 361009, China Tel: 086-0591-83057798 Fax: 086-0591-83057798 Email: [email protected] Date:2023-06-28 Attestation To: FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, AKUVOX (XIAMEN) NETWORKS CO., LTD., hereby authorize China Certification ICT Co., Ltd (Dongguan) to act as a laboratory for testing and test report generation for the following project(s): (Product Name:Door Phone, Model Name:S539 FCC ID:2AHCR-S539V1) The RF chipset supports WiFi, BT,BLE 1M and BLE 2M proprietary technology, but for this device, WiFi and BLE 2M proprietary technology was disabled by software, the end user has no capability to ac tivate it. Please contact me if you have any question. Signature: Printed Name: Bo Yang Title: Manager

      !"#$%&# ''()*+$,#-./01  ,'$!,2314516$ 748.())9$":  4 );.<)-9(<;8)-==9; 7 >?@60A,B#,7  &4C)C8<).<C;  +& %"" !" !! 0:,1 D ,'A 0 ,& A E , =F8-6 ' E ,' ", 07G $&C()F.  42 4E ,!474E51C#9(('- $ + ? +""&C H" <!-89(      !"#$%&#I:4 J41 2 4E::4 4K0 742,13: :0:,1 D , EE,0?: E,I,A414'J4K0 74 1,: G 4'21,7 144 A ?4K0 740:,1 D , 01E0,E4 ,C#9)8,2:4+""10 4E#  '   !"#$%&#I:4 J41 2 4E:$E,2 :4'4,2:42 ?,2:4  ,$:4  E, '4 2 4',:4",A414'% EE 4  > 1,'0 ?I,A414'J4K0 74#  ! 414 >$     ! ?4' G> 1 4'74L,M?  ! ?014?41 

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-28 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:2AHCR-S539V1 AKUVOX ( XIAMEN) NETWORKS CO., LTD. (“the Applicant”) certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. AKUVOX (XIAMEN) NETWORKS CO., LTD. (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. D esignated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant:AKUVOX (XIAMEN) NETWORKS CO., LTD. Address:10/F, No.56 Guanri Road, Software Park II, Xiamen 361009, China FRN:0025226762 Tel:086-0591-83057798 Email:[email protected] Signed by (printed name): Bo Yang Signature:

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

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS NFC Antenna(13.56MHz) 125kHz Antenna

5.8G Antenna Bulethooth Antenna

RF EXPOSURE EVALUATION Applicant: AKUVOX (XIAMEN) NETWORKS CO., LTD. Address: 10/F, No.56 Guanri Road, Software Park II, Xiamen 361009, China FCC ID: 2AHCR-S539V1 Product Name: Door Phone Standard(s): 47 CFR §1.1310, 47 CFR §2.1091 447498 D01 General RF Ex posure Guidance v06 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230630917-00E Date Of Issue: 2023/8/7 Reviewed By: Julie Tan Title: RF Engineer Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230630917-00E Page 2 of 5 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230630917-00E Page 3 of 5 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 CR230630917-00E Original Report 2023/8/7 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230630917-00E Page 4 of 5 1.1 Applicable Standard According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. 1.2 Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: China Certification ICT Co., Ltd (Dongguan) Report No.: CR230630917-00E Page 5 of 5 1.3 EUT Information▲: Operation Modes Operation Frequency (MHz) Max Conducted output power including Tune-up Tolerance (dBm) Maximum Antenna Gain (dBi) Bluetooth BDR/EDR 2402-248011-0.8 Bluetooth LE 2402-24809-0.8 5.8G 5866.5-11.340 NFC(13.56MHz) 13.56-31.36/ 125kHz 0.125-23.22/ Note: 1. The Above Parameters were provided by the manufacturer. 2. *NFC field strength is 63.84dBμV/m @ 3m = -31.36 dBm(0.0007mW) EIRP. That equal to antenna gain is 0dBi and used the EIRP value as conducted power. 3. *125kHz field strength is 71.98dBμV/m @ 3m = -23.22 dBm(0.005mW) EIRP. That equal to antenna gain is 0dBi and used the EIRP value as conducted power. 4. *5.8G field strength is 83.86dBμV/m @ 3m = -11.34 dBm(0.073mW) EIRP. That equal to antenna gain is 0dBi and used the EIRP value as conducted power. 1.4 Calculated Data: Operation Modes Frequency (MHz) Antenna Gain Conducted output power including Tune-up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) Bluetooth BDR/EDR 2402-2480 -0.8 0.83 11 12.59 20.00 0.002 1.0 Bluetooth LE 2402-2480 -0.8 0.83 97.94 20.00 0.001 1.0 5.8G 5866.50 1.00 -11.340.07 20.00 0.000015 1.0 NFC(13.56MHz) 13.560 1.00-31.36 0.000720<<0.0001 0.98 125kHz 0.1250 1.00-23.22 0.00520<<0.0001 / The Bluetooth and 5.8G can transmit simultaneously: (BDR/EDR can`t transmission simultaneously with BLE) =S BT /S limit- BT + S 5.8 /S limit- 5.8 =0.002/1+ 0.000015/1 =0.002 < 1.0 Note: the power Density of 13.56MHz and 125 kHz too low to calculate the MPE Result: The device meet FCC MPE at 20 cm distance ===== END OF REPORT =====

客 户 星网 CUSTOMER: 客户料号 S539 CUSTOMER NO: 品 名 Antenna L=120mm MHF PART NAME: 供方料号 WE007N.F0124.V01 SUPPLIER NO : 送样日期 Date: 送样数量 Q“TY: 福州市瀚宇正达电子有限公司 Word Easy Electronics Co.,Ltd. 供方确认 SUPPLIER SIGNATURE APPROVAL CHECK DESIGN Hunter Zhou Hongtao Fang 客户确认CUSTOMER APPROVED BY APPROVAL CHIEF SUPERVISOR 日 期 2022/09/06 Date 编 号 22090601 File No 版 本 1.0 Revision 规 格 承 认 书 SPECIFICATION FOR APPROVAL WE-RD-F01-A 承认书项目表 NO. 内 容 （Contents） 页 数 （Number of Page） 页 码 （Page Code） 1 承认书封面 （Spec Cover） 1 1 2 承认书项目表（Spec Item ） 1 2 3 工程成品图 （Drawing） 2 3 ~4 4 天线规格（Antenna Specification） 1 5 5 S参数测试 （S Parameter ） 1 6 6 无源测试 （Passive Test ） 2 7 ~ 8 7 天线装配图（Antenna Profile） 2 9 ~ 10 8 RoHS报告（ RoHS Test Report ） ** ** 9 N/A N/A N/A 10 - - - 11 - - - 12 - - - 天 线 规 格 An te n n a S p e c ific ation Electrical Properties Frequency 2400-2500MHz I m pedance 50 O hm N om i nal V .S .W .R <1 .6 R et ur n Loss <- 15dB R adi at i on Om n i - di r ect i onal G ai n ( P eak) -0.8dBi Polarization Linear C onnect or 1代I-PEX Physical Properties A nt enna M at er i al FPC Cable Type O.D.1.13//L=120mm O per at i ng T em p. -30 ~ +60 ̊C Storage Temp. -30 ~ +70 ̊C Cable Color Gray Agilent E5071C S Para meter Test Antenna Performance Test Antenna Passive Test Passive Test For WIFI Freq (MHz) Effi (%) Effi (dB) Gain ( dBi) 240012.8 -9.5 -1.3 241013.1 -9.0 -0.8 242012.7 -9.7 -1.7 243013.6 -8.4 -0.8 244012.8 -9.6 -2.5 245013.5 -8.6 -1.8 246013.0 -9.2 -2.3 247013.5 -8.6 -1.9 248013.2 -8.9 -2.6 249013.4 -8.7 -2.9 250014.4 -7.6 -2.1 Device Antenna Antenna Profile Assembly Drawing Ant enna

TEST REPORT Applicant: AKUVOX (XIAMEN) NETWORKS CO., LTD. Address: 10/F, No.56 Guanri Road, Software Park II, Xiamen 361009, China FCC ID: 2AHCR-S539V1 Product Name: Door Phone Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230630917-00A Date Of Issue: 2023/6/26 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230630917-00A Page 2 of 38 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230630917-00A Page 3 of 38 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.3 6 DB EMISSION BANDWIDTH: ...........................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View-Adapter Conducted Emissions Side View- Adapter Conducted Emissions Front View—POE Conducted Emissions Side View- POE Radiated Emission Below 1GHz View- Adapter Radiated Emission Below 1GHz View-POE Radiated Emission Above 1GHz View-POE