2AHJMMUAEJJWalkie Talkie Two-way Radio

Owner’s Manual Printed in China Part No. AL-ML English TWO-WAY RADIO MODEL Nothing Comes Close to a Cobra ® MU1500 Owner’s Manual Nothing Comes Close to a Cobra ® MU1500MU1500 Staying in touch is convenient and easy when using your radio. Some of the many uses you will discover include: Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions; connecting with neighbors; arranging meeting spots with others while shopping at the mall; talking with your colleagues in warehouse or jobsite. Introduction Making Life Easier and Safer Customer Assistance Product Service & Support For any questions about operating this new Cobra branded product, PLEASE CONTACT US FIRST...do not return this product to the retail store. The contact information for support will vary depending on the country in which you purchased and utilize the product. To obtain warranty service or other information for products purchased from Altis itself or through its authorized reseller or agent and utilized in the U.S.A., please call our consumer support line at (866) 721-3805, or email us at [email protected]. You will receive instructions on how to ship the products at your expense to an Altis Global Limited Authorized Service Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; and, most importantly; (c) your address and telephone number. For warranty and customer service information outside the US, please contact your local dealer. For further information needed on its features, please visit www.cobrawalkietalkie.com for frequently asked questions and the electronic manual. A-1A-2 ©2021 Altis Global Limited, Atlanta, GA USA. www.cobrawalkietalkie.com WARNING: Important Safety Instructions for Battery Read All Instructions • Do not incinerate the battery even if it is severely damaged or is completely worn out. • Do not discard battery in a re. The battery pack can explode in a re. • Do not replace battery in any area labeled “Hazardous Atmosphere”. Any sparks created in a potentially explosive atmosphere can cause an explosion or re. • Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. • Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. • A small leakage of liquid from the battery cells may occur under extreme usage or temperature conditions. This does not indicate a failure. Do not open, deform or mutilate the battery as there may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. However, if the outer seal is broken and this leakage gets on your skin: a. Wash quickly with soap and water. b. Neutralize with a mild acid such as lemon juice or vinegar. c. If battery liquid gets into your eyes, ush them with clean water for a minimum of 10 minutes and seek immediate medical attention. This product uses Lithium Polymer Battery. Do not transport package if damaged, a re hazard could exist. Recycle Battery Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. 1. Only accessories included in this package or specied by the manufacturer should be used with the radio. The 5V micro-USB charging input is compatible with most high quality micro-USB chargers that fully conform to the USB standards. 2. Do not use cleaners or solvents to clean the exterior of the radio. Use only a damp or dry cloth. 3. Do not expose this product to splashing or dripping water. 4. Do not attempt to service the receiver yourself. Removing the cover will void the warranty. Changes or modications not expressly approved by Cobra may void the user’s authority granted by the FCC to operate this device and should not be made. 5. Do not plug the wall adaptor into the power outlet if the outlet is wet. 6. Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. WARNING: Important Safety Instructions Before operating the radio, please read all safety and operating instructions. Save all instructions in a safe place for future reference. 1 2 109 8 7 6 5 3 4 1. Antenna 2. Push-to-Talk Button 3. PF1 key 4. PF2 key 5. Microphone 6. MIC-SP Jack Reading/Writing Frequency Jack 7. Speaker 8. LED indicator 9. Power On/Off / Volume Knob 10. Channel / Privacy Code Selection Knob A-31 Introduction Product Features Customer Assistance Operational Cautions Exposure to high volume sound levels may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your radio with the volume set at low level and avoid prolonged exposure to high volume sound levels. 1. Set the volume control in a low position and use as low volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possble, use your radio in a quiet environment with low background noise. 3. Limit the amount of time you use headsets or earpiece at high volume levels. 4. When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear. 5. Observe all signs and instructions that require an electrical device or RF radio product to be switched off in designated areas, such as gas/refueling stations, hospitals, blasting areas, potentially explosive atmospheres, or aircraft. 6. If you experience a skin irritation after using this product, discontinue to use and seek medical attention. 7. If the product or charger: overheats; has a damaged cord or plug; has been dropped or damaged; has been dropped into water, disconnect any charger from its power supply, discontinue use of the produ…

Text truncated - open the document above for the full version.

Altis Technology (Hong Kong) Ltd. Address: 26/F,Rykadan Capital Tower,135 Hoi Bun Road,Kwun Tong Tel: +852-27971111 E-Mail: [email protected] Date: 2021-1-3 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Altis Technology (Hong Kong) Ltd. Walkie Talkie Two-way Radio BACL. Meanwhile, for our marketing purpose,we would like to list a series model 2,MU1500-BCH6) on reportsand certificate. option(as Charger Base ,Power cable, and the artwork of Packing, enclosure(dimensions and material), We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature: Altis Technology (Hong Kong) Ltd. Address: 26/F,Rykadan Capital Tower,135 Hoi Bun Road,Kwun Tong,HongKong 27971111 Mail: [email protected] Declaration letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division Altis Technology (Hong Kong) Ltd. hereby declare that we have a way Radio, (model:MU1500, FCC ID: 2AHJMMUAEJJ Meanwhile, for our marketing purpose,we would like to list a series model on reportsand certificate. The difference of only with color, rger Base ,Power cable ), number of Radio in one pack, the packing method and the artwork of Packing, all the other characteristic like PCB Layout, circuits, material), are exactly same. mation above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. HongKong,China hereby declare that we have a product named as MUAEJJ)were tested by Meanwhile, for our marketing purpose,we would like to list a series model (MU1500- e difference of only with color, accessories number of Radio in one pack, the packing method all the other characteristic like PCB Layout, circuits, mation above is true, and we’ll be responsible for all the consequences. Vincent Kwok Title: Senior Manager

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 1 of 9 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 2 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 3 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 4 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 5 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 6 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 7 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 8 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 9 of 9

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200902016-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 1 of 5 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 4 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF Page 5 of 5

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. SAR EVALUATION REPORT For Altis Technology (Hong Kong) Ltd. 26/F, Rykadan Capital Tower, 135 Hoi Bun Road, Kwun Tong, Hong Kong, China FCC ID: 2AHJMMUAEJJ Report Type: Original Report Product Type: Walkie Talkie Two-way Radio Report Number: RSZ200910001-20 Report Date: 2020-10-16 Reviewed By: Brave Lu SAR Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSZ200910001-20 SAR Evaluation Report 2 of 31 Attestation of Test Results EUT Information EUT Description Walkie Talkie Two-way Radio Tested Model MU1500 Multiple Models MU1500-2, MU1500-BCH6 FCC ID 2AHJMMUAEJJ Serial Number RSZ200910001-SA-S1 Test Date 2020-9-11 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) PTT 1g Head SAR (Face Up) 0.47 1.6 1g Body SAR (Body Back) 0.50 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 643646 D01 SAR Test for PTT Radios v01r03 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSZ200910001-20 SAR Evaluation Report 3 of 31 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 6 SAR LIMITS ................................................................................................................................................................. 7 FACILITIES .................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 13 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 13 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 14 LIQUID VERIFICATION ............................................................................................................................................... 14 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 15 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 16 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 18 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 18 CHEEK/TOUCH POSITION ........................................................................................................................................... 19 EAR/TILT POSITION ................................................................................................................................................... 19 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 20 TEST DISTANCE FOR SAR EVALUATION .................................................................................................................... 20 SAR EVALUATION PROCEDURE ................................................................................................................................. 21 OUTPUT POWER MEASUREMENT...........................................................…

Text truncated - open the document above for the full version.

APPENDIX C PROBE CALIBRATION CERTIFICATES APPENDIX C PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: RSZ200910001-20 Page 1 of 10 Test Plot 1#:FM_11.25kHz_151.82MHz_Face Up DUT: Walkie Two-way Radio; Type: MU1500; Serial: RSZ200910001-SA-S1 Communication System: FM; Frequency: 151.82 MHz;Duty Cycle: 1:1 Medium parameters used: f = 151.82 MHz; σ = 0.756 S/m; ε r = 52.235; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: ES3DV2 - SN3019; ConvF(7.59, 7.59, 7.59) @ 151.82 MHz; Calibrated: 2019/9/25  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE3 Sn471; Calibrated: 2019/12/25  Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x191x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.912 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.67 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.859 W/kg; SAR(10 g) = 0.681 W/kg Maximum value of SAR (measured) = 0.892 W/kg 0 dB = 0.892 W/kg = -0.50 dBW/kg Report No.: RSZ200910001-20 Page 2 of 10 Test Plot 2#: FM_11.25kHz_151.88MHz_Face Up DUT: Walkie Two-way Radio; Type: MU1500; Serial: RSZ200910001-SA-S1 Communication System: FM; Frequency: 151.88 MHz;Duty Cycle: 1:1 Medium parameters used: f = 151.88 MHz; σ = 0.759 S/m; ε r = 52.224; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: ES3DV2 - SN3019; ConvF(7.59, 7.59, 7.59) @ 151.88 MHz; Calibrated: 2019/9/25  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE3 Sn471; Calibrated: 2019/12/25  Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x191x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.851 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.36 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.04 W/kg SAR(1 g) = 0.803 W/kg; SAR(10 g) = 0.637 W/kg Maximum value of SAR (measured) = 0.833 W/kg 0 dB = 0.833 W/kg = -0.79 dBW/kg Report No.: RSZ200910001-20 Page 3 of 10 Test Plot 3#: FM_11.25kHz_151.94MHz_Face Up DUT: Walkie Two-way Radio; Type: MU1500; Serial: RSZ200910001-SA-S1 Communication System: FM; Frequency: 151.94 MHz;Duty Cycle: 1:1 Medium parameters used: f = 151.94 MHz; σ = 0.762 S/m; ε r = 52.213; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: ES3DV2 - SN3019; ConvF(7.59, 7.59, 7.59) @ 151.94 MHz; Calibrated: 2019/9/25  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE3 Sn471; Calibrated: 2019/12/25  Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x191x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.925 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.60 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.15 W/kg SAR(1 g) = 0.873 W/kg; SAR(10 g) = 0.687 W/kg Maximum value of SAR (measured) = 0.906 W/kg 0 dB = 0.906 W/kg = -0.43 dBW/kg Report No.: RSZ200910001-20 Page 4 of 10 Test Plot 4#: FM_20kHz_154.57MHz_Face Up DUT: Walkie Two-way Radio; Type: MU1500; Serial: RSZ200910001-SA-S1 Communication System: FM; Frequency: 154.57 MHz;Duty Cycle: 1:1 Medium parameters used: f = 154.57 MHz; σ = 0.765 S/m; ε r = 52.081; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: ES3DV2 - SN3019; ConvF(7.59, 7.59, 7.59) @ 154.57 MHz; Calibrated: 2019/9/25  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE3 Sn471; Calibrated: 2019/12/25  Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x191x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.678 W/kg Zoom Scan (5x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.91 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.824 W/kg SAR(1 g) = 0.643 W/kg; SAR(10 g) = 0.514 W/kg Maximum value of SAR (measured) = 0.668 W/kg 0 dB = 0.668 W/kg = -1.75 dBW/kg Report No.: RSZ200910001-20 Page 5 of 10 Test Plot 5#: FM_20kHz_154.6MHz_Face Up DUT: Walkie Two-way Radio; Type: MU1500; Serial: RSZ200910001-SA-S1 Communication System: FM; Frequency: 154.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 154.6 MHz; σ = 0.768 S/m; ε r = 52.069; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: ES3DV2 - SN3019; ConvF(7.59, 7.59, 7.59) @ 154.6 MHz; Calibrated: 2019/9/25  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE3 Sn471; Calibrated: 2019/12/25  Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x191x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.652 W/kg Zoom Scan (5x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.45 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.801 W/kg SAR(1 g) = 0.622 W/kg; SAR(10 g) = 0.498 W/kg Maximum value of SAR (measured) = 0.646 W/kg 0 dB = 0.646 W/kg = -1.90 dBW/kg Report No.: RSZ200910001-20 Page 6 of 10 Test Plot 6#: FM_11.25kHz_151.82MHz_Body Back DUT: Walkie Two-way Radio; Type: MU1500; Serial: RSZ200910001-SA-S1 Communication System: FM; Frequency: 151.82 MHz;Duty Cycle: 1:1 Medium parameters used: f = 151.82 MHz; σ = 0.791 S/m; ε r = 61.875; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: ES3DV2 - SN3019; ConvF(7.43, 7.43, 7.43) @ 151.82 MHz; Calibrated: 2020/2/24  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE3 Sn471; Calibrated: 2019/12/25  Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (6…

Text truncated - open the document above for the full version.

Report No.: RSZ200910001-20 Page 1 of 2 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Report No.: RSZ200910001-20 Page 2 of 2 Face Up Setup Photo(25mm) Body Back Setup Photo(0mm) 38mm 28mm 25mm

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 95 MEASUREMENT AND TEST REPORT For Altis Technology (Hong Kong) Ltd. 26/F, Rykadan Capital Tower, 135 Hoi Bun Road, Kwun Tong, Hong Kong, China FCC ID: 2AHJMMUAEJJ Report Type: Original Report Product Type: Walkie Talkie Two-way Radio Report Number: RSZ200910001-00A Report Date: 2020-10-22 Reviewed By: Jacob Kong RF Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200910001-00A FCC Part 95 Page 2 of 26 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 EXTERNAL I/O CABLE .................................................................................................................................................. 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 TEST EQUIPMENT LIST ........................................................................................................................................... 7 FCC §1.1307(b) & §2.1093 - RF EXPOSURE ............................................................................................................. 8 APPLICABLE STANDARD .............................................................................................................................................. 8 FCC §2.1046, §95.2767 - RF OUTPUT POWER ........................................................................................................ 9 APPLICABLE STANDARD .............................................................................................................................................. 9 TEST PROCEDURE ........................................................................................................................................................ 9 TEST DATA .................................................................................................................................................................. 9 FCC §2.1049, §95.2773 & §95.2779(a) - OCCUPIED BANDWIDTH AND EMISSION MASK ......................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §2.1051 & §95.2779 - SPURIOUS EMISSIONS AT ANTENNA TERMINALS .......................................... 15 APPLICABLE STANDARD ............................................................................................................................................ 15 TEST PROCEDURE ...................................................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 15 FCC §2.1053 & §95.2779 - RADIATED SPURIOUS EMISSION .......................................................................... 18 APPLICABL…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200910001-RF EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)