
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
1 STEP/ PASO Check the box contents/ Verificar el contenido Look in the box and make sure you have the following: Confirmar que en la caja vengan los siguientes articulos : QUICK START GUIDE GUÍA DE INICIO RÁPIDO ETHERNET CABLE CABLE ETHERNET QUICK START GUIDE GUÍA DE INICIO RÁPIDO CHITA3.1 Read me first! ¡Léame primero! Connect to the network Conectar a la red Set up your wireless network Configuración de redes Wi-Fi CHITA3.1 POWER ADAPTER ADAPTADOR DE ALIMENTACIÓN 2 STEP/ PASO Connect the cable port/ Conectar el cable coaxial Connect the device’s CABLE connector to a cable outlet in your home. Conectar el cable coaxial al conector del dispositivo y al connector de su hogar. 3 STEP/ PASO Connect the power adapter/ Conectar la fuente de poder Connect the included power adapter from the POWER port to a wall outlet. Conectar la fuente de poder incluida al dispositivo y al conector de electricidad en la pared. 5 STEP/ PASO Access LAN for initial configuration / Configuracion inicial para acceso LAN 0440010343N0 Ethernet Method/ Método EthernetWi-Fi Method/ Método Wi-Fi 4 Para completar la configuración inicial, se puede acceder al CHITA3.1 desde una laptop conectada por cable Ethernet o por algún dispositivo móvil conectado a la red Wi-Fi por defecto descrita en la etiqueta de la parte posterior de su nuevo equipo CHITA3.1. To complete initial setup, you can access CHITA3.1 using a laptop connected by a Ethernet cable or any mobile device with the default Wi-Fi network name found on the back label of your new CHITA3.1. Wireless Devices (Optional) / Dispositivos Wireless (Opcional) Connect your wireless devices with the correct SSID and Passphrase chosen in label. Conecte sus dispositivos con el SSID y contraseña (Passphrase) descritos en la etiqueta. To connect a wireless device with the Wi-Fi Protected Setup button (WPS), You need to first access the GUI with the user “cusadmin” and password as “password”, enter the Wireless page to enable WPS for each band seperately and then save the changes. Press the WPS button on the CHITA3.1 and on the device you wish to connect within 2 minutes of each other while they are in the coverage area. Para conecta un dispositivo con el botón WPS (« Wi-Fi Protected Setup »), se debe acceder a la GUI con el usuario « cusadmin » y la contraseña « password » Habilitar la función WPS para cada banda de forma separada y guarde los cambios realizados. Precionar el botón WPS en CHITA3.1 y en el dispositivo que desea conectar en un tiempo mínimo de 2 minutos entre ambos y teniendo ambos dispositivos en rango de conexión. STEP/ PASO Connect a Telephone Device (Optional)/ Conecte un Teléfono(opcional) 6 STEP/ PASO Connect any LINE port to a telephone. This is required only if you have ordered telephone service. Conecte su teléfono a cualquier puerto telefónico. Realice este paso en caso de que haya contratado servicio telefónico. P/N:0123456789AB Made in XXXXX S/N:AB1234567890 CM MAC:AB9876543210 Model Name: CHITA3.12.4G SSID:YZ1234567890 PassPhrase: 9876543210YZ 5G SSID:YZ1234567890 COPYRIGHT © 2020 HITRON TECHNOLOGIES, INC. Safety warnings/ Advertencia de Seguridad POWER DS US 2.4G 5G STATUS ETHERNET Green-Steady Verde-Estable Off Apagado Green-Blinking Verde-Itermitente Green-Steady Verde-Estable Blue-Steady Azul-Estable Cyan-Steady Cian-Estable Off Apagado Modem is running with AC power. El Modem tiene alimentación eléctrica. Not powered. Sin alimentación eléctrica. The modem is searching for the downstream frequency. El modem está buscando frecuencia de bajada. Downstream frequency is locked. (1 channel only) Frecuencia de bajada sincronizada. (1 solo canal) Downstream frequency is locked. (channel bonding) Frecuencia de bajada sincronizada. (bonding de canales) DOCSIS 3.1 OFDM DOCSIS 3.1 OFDM Not scanning. No se escanea por canales. Green-Blinking Verde-Itermitente Green-Steady Verde-Estable Off Apagado The 2.4GHz wireless network is enabled, and data is being transmitted or received. La red WiFi 2.4GHz está activa y está recibiendo o enviando información. The 2.4GHz wireless network is enabled, and no data is being transmitted or received. La red WiFi 2.4GHz está activa, pero no hay transmisión de información. Not powered. Red apagada. Green-Blinking Verde-Itermitente Green-Steady Verde-Estable Off Apagado The 5GHz wireless network is enabled, and data is being transmitted or received. La red WiFi 5GHz está activa y está recibiendo o enviando información. The 5GHz wireless network is enabled, and no data is being transmitted or received. La red WiFi 5GHz está activada, pero no hay transmisión de información. Not powered. Red apagada. Green-Blinking Verde-Itermitente Green-Steady Verde-Estable Blue-Steady Azul-Estable Cyan-Steady Cian-Estable Off Apagado The modem is searching for the upstream frequency. El modem está buscando frecuencia de subida. Upstream frequency is locked. (1 channel only) Frecuencia de subida sincronizada. (1 solo canal) Upstream frequency is locked. (channel bonding) Frecuencia de subida sincronizada. (bonding de canales) DOCSIS 3.1 DOCSIS 3.1 Not scanning. No se escanea por canales. Green-Blinking Verde-Itermitente Green-Steady Verde-Estable Off Apagado Registration is in progress with cable company’s head-end. Proceso de registro con la compañia de servicios. Modem is operational. El modem esta operacional. Modem is offline. El modem esta offline. Green-Blinking Verde-Itermitente Off Apagado Ethernet is activated. Ethernet activado. Ethernet is disabled. Ethernet desactivado. LED display/ Luces LED Setup complete/ Configuración Exitosa IP addresses/ Adresses IP If your CHITA3.1 is successfully connected to the network (see LED display) but you cannot access the Internet from a connected device, your device’s IP address may be set up incorrectly. Si su CHITA3.1 se ha conectado con éxito a su red (referir la sección Luces LED), pero no tiene acceso a Internet, es posible que la IP de su dispositivo no este configurada correctamente. In y…
Text truncated - open the document above for the full version.
PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 1 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 Brand Name: Hitron Model Name: CHITA3.1 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 2 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 3 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 4 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 5 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 Adapter PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 6 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 7 of 7 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 RJ-45 cable
Label and location (side of the device)
PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 1 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 Brand Name: Hitron Model Name: CHITA3.1 Ant. 1 Ant. 2 Ant. 4 Ant. 3 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 2 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 3 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 4 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 5 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 6 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 7 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 8 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 9 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 10 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 11 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 12 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 13 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 14 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 15 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 16 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 17 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 18 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 19 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 20 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 21 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 22 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 23 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 24 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 25 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 26 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 27 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 28 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 29 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01 PHOTOGRAPHS OF EUT EP2N1823 Sporton International Inc. Page No. : 30 of 30 Report Template No.: SE Ver 1.0_EP Issued Date : Mar. 24, 2023 Report Version : 01
RADIO EXPOSURE TEST REPORT Report No. : FA2N1823 TEL : 886-3-656-9065 Page Number : 2 of 10 FAX : 886-3-656-9085 Issued Date : Mar. 24, 2023 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 EUT General Information ....................................................................................................................... 5 1.2 Antenna Information ............................................................................................................................... 5 1.3 Accessories ............................................................................................................................................ 6 1.4 Applicable Standards ............................................................................................................................. 6 1.5 Testing Location ..................................................................................................................................... 7 2 Maximum Permissible Exposure ........................................................................................................ 8 2.1 Limit of Maximum Permissible Exposure ............................................................................................... 8 2.2 MPE Calculation Method ........................................................................................................................ 8 2.3 MPE Exemption ...................................................................................................................................... 9 2.4 Calculated Result and Limit .................................................................................................................. 10 Photographs of EUT v01 RADIO EXPOSURE TEST REPORT Report No. : FA2N1823 TEL : 886-3-656-9065 Page Number : 3 of 10 FAX : 886-3-656-9085 Issued Date : Mar. 24, 2023 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 History of this test report Report No. Version Description Issued Date FA2N1823 01 Initial issue of report Mar. 24, 2023 RADIO EXPOSURE TEST REPORT Report No. : FA2N1823 TEL : 886-3-656-9065 Page Number : 4 of 10 FAX : 886-3-656-9085 Issued Date : Mar. 24, 2023 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PA SS - Declaration of Conformity: 1. The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. It’s means measurement values may risk exceeding the limit of regulation standards, if measurement uncertainty is include in test results. 2. The measurement uncertainty please refer to report ”Measurement Uncertainty”. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Sam Chen Report Producer: Vicky Huang RADIO EXPOSURE TEST REPORT Report No. : FA2N1823 TEL : 886-3-656-9065 Page Number : 5 of 10 FAX : 886-3-656-9085 Issued Date : Mar. 24, 2023 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 1 General Description 1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 2.4GHz WLAN 2400-2483.5 2412-2462 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) VHT: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 5GHz WLAN 5150-5250 5725-5850 5180-5240 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 1.2 Antenna Information Ant. Port Brand Model Name Antenna Type Connector Gain (dBi) 2.4GHz 5GHz 2.4GHz 5GHz 1 1 1 WIESON GY196HC112-018 PCB Antenna I-PEX 1.99 1.97 2 2 2 WIESON GY196HC112-019 PCB Antenna I-PEX 1.58 1.87 3 3 3 WIESON GY196HC112-020 PCB Antenna I-PEX 1.96 1.96 4 - 4 WIESON GY196HC112-021 PCB Antenna I-PEX - 1.76 Note1: The above information was declared by manufacturer. Note2: For WLAN 2.4GHz function: For IEEE 802.11b/g/n/VHT mode (3TX/3RX): Port 1, Port 2 and Port 3 can be use as transmitting/receiving antenna. Port 1, Port 2 and Port 3 could transmit/receive simultaneously. For WLAN 5GHz function: For IEEE 802.11a/n/ac mode (4TX/4RX): Port 1, Port 2, Port 3 and Port 4 can be use as transmitting/receiving antenna. Port 1, Port 2, Port 3 and Port 4 could transmit/receive simultaneously. RADIO EXPOSURE TEST REPORT Report No. : FA2N1823 TEL : 886-3-656-9065 Page Number : 6 of 10 FAX : 886-3-656-9085 Issued Date : Mar. 24, 2023 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Note3: Directional gain information 1.3 Accessories Accessories Equipment Name Brand Name Model Name Rating Adapter MOSO MSS-V3500WR120-042A0-US Input: 100-240V~50/60Hz, 1.2A max. Output: 12.0V, 3.5A Other RJ-45 cable*1, non-shielded, 1.5m 1.4 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: 47 CFR Part 2.1091 KDB 447498 D04 Interim General RF Exposure Guidance v01 The following reference test guidance is not within the scope of accreditation of TAF. 47 CFR Part 1.1307 47 CFR Part 1.1310 RADIO EXPOSURE TEST REPORT Report No. : FA2N1823 TEL : 886-3-656-9065 Page Number : 7 of 10 FAX : 886-3-656-9085 Issued Date : Mar. 24, 2023 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 1.5 Testing Loc…
Text truncated - open the document above for the full version.
規格承認書 Specification for Approval 客 戶: 仲琦 Customer: 品 名: WIFI ANTENNA Part name 料 號: GY196HC112-018 Part No. 客戶料號: 3930000251B8 Customer Part No. REV: 02 客戶承認印 CUSTOMER APPROVED BY APPROVAL CHIEF SUPERVISOR Approval No. Model Part No. CHIEF SALES R&D DESIGN ROX Grant Fountain MARS Date:2023/2/21 Date:2023/2/21 驊 陞 科 技 股 份 有 限 公 司 WIESON TECHNOLOGIES CO., LTD. 表格編號:324012 版本: 第四版 The details of the antenna are as follows: 1. Model: 2. Quantity:10 3. Results: Name Failure Rate MTBF GY196HC112-XXX 3678.2 31.0353 Years *Fits (Failure Unit)=Failure Per Hour(10^9) Failure Rate( λ )=1x10^9 Hours (FITs) MTBF=1/ λ Bellcore Method I – Case 1 Equations Device Steady – State Failure rate = λSSi Wher e: λSSi=λGiπQiπSiπTi λGi=Generic steady-state failure rate for the ith device πTi=Temperature Factor based on 40°C temperature(value of 1.0) πSi=Stress Factor =based on 50% stress(value of 1.0) πQi=Quality Factor for the ith device Part N umber Description Q’ty λGi πTi πSi πQi λSSi MTBF GY196HC112-XXX 1 3678.2 1 1 1 3678.2 31.0353 Years 㚸ೊઝݾैٝڶૻֆ WIESON TECHNOLOGES CO.,LTD ՠʳ ࿓ʳ ຝ ֮ٙᒳᇆ ขᒳᇆᒤ ठء A ᑇ 1/1 GY196 ٨ߓ ټ: RF ANTENNA GY196 HC112 – XXX RF Antenna ٨ߓᒘʳʳʳʳʳʳʳʳʳᅶ᠊ҷ⺐⌕∈⺐ Features ●●●●●●●●●●●●●●●●●●●●●●●○○ Structure ●●●●●●●●●●●●●●●●●●●●●●●○○ Suitable use ●●●●●●●●●●●●●●●●●●●●●●●○○ Product name G9000-SY Main component Acrylic Carrier Nonwoven fabric Color Translucent Adhesive thickness (μm) About 150 Release paper thickness (μm) About 120 Bonding strength (N/20mm) *1 11.77 Bonding strength (N/20mm) *2 8.00 St'd size (width & length) 500mm×50m 1020mm×50m ■ It is suitable for the material bonding usage of plastic such as nameplates and front panels of electricity and an electronic equipment (ABS, PS, and acrylic resin, etc.) and the metals (aluminum and stainless steel plate, etc.). ■ Adhesive tape with lower environmental impact with UV curable manufacturing method (non solvent adhesive coating process). ■ G9000-SY clears The VOC guideline of Japanese Health, Labor and Welfare. ■ High adhesive quality (heat resistance and weather resistance) for wide ranging applications. ■ Excellent holding power even at elevated temperature of 100°C. G9000-SY TDSー198 *1 180°peeling strength / substrate : stainless steel SUS304 (surface is polished by #280 sandpaper) *2 180°peeling strength / substrate : stainless steel SUS304BA General-purpose double coated tapes G9000-SY <Holding power test> Measurement temperature 40°C 60°C 80°C 100°C Creep length (mm) 0.2 0.3 0.3 0.6 2. Holding power at different temperatures <Test piece condition> Substrate: Stainless steel SUS304 (surface is polished by #280 sandpaper) Bonding area: 25mm×25mm Bonding condition: One stroke with 2-kg roller [Left at RT for one hour and then at each temperature for 30 minutes before measurement] [Creep length after one hour application of 1-kg load] <Results> <Results> 3. Bonding strength at different temperatures (180°peeling) <Test piece condition> Substrate: Stainless steel SUS304 (surface is polished by #280 sandpaper) Tape width : 20mm Bonding condition: One stroke with 2-kg roller Peeling speed: 300mm/min Backing material: 100μm Aluminum foil (-20°C to 5°C), 25μmPET (10°C to 100°C) [Left at RT for one day and then at each temperature for 30 minutes before measurement] (N/20mm) Measurement temperature -20°C 0°C 5°C 10°C 23°C 40°C 60°C 80°C 100°C 180°peeling strength * 32.4 28.3 25.5 17.4 14.4 11.9 10.8 9.3 * AF from backing material 1. Bonding strength on various type of substrate (180°peeling) <Test piece condition> Tape width: 20mm Bonding condition: One stroke with 2-kg roller Measuring condition: 23°C±5°C 60%±20%RH Peeling speed: 300mm/min Backing material: 25μmPET [Left at RT for one hour before measurement] <180°peeling strength test> <test data> Slip and stick Substrate AL ABS Acrylic PS PC PP 180°peeling strength 8.8 11.6 12.4 11.5 11.9 5.1 Substrate Soft PVC Hard PVC Glass CR NR 180°peeling strength 12.6 13.2 12.9 3.4 4.0 <Results> (N/20mm) TDSー198 G9000-SY [Remarks] *The above values are sample observed values, not the guaranteed performance. Technical data ●●●●●●●●●●●●●●●●●●●●●●●○○ URL:http://www.dexerials.jp/en/ Head Office: Gate City Osaki, East Tower 8 th floor,1-11-2 Osaki, Shinagawa-ku, Tokyo, JAPAN 141-0032 Chemical Products Sales Dept. TEL : +81-3-5435-3946 Note on the characteristic data given― Data on the characteristics of the products described in this catalog are based on the results of evaluations carried out by the company. This does not guarantee that the characteristics of the product conform with your usage environment. Before use, review the usage conditions based on evaluation data obtained from the equipment and substrates actually used. 5. Amount of VOC diffusion <Methods of analysis> JIS A-1901:Small chamber method ※ The indoor density indicator value that the Ministry of Health, Labour and Welfare in Japan sets <Results> ( Volatile organic compound ) The indoor density indicator value ※ G9000-SY formaldehyde 100μ g /m3 <2.5 toluene 260μ g /m3 <0.5 Xylene 870μ g /m3 <0.5 para-dichlorobenzene 240μ g /m3 <0.5 Ethylbenzene 3800μ g /m3 <0.5 styrene 220μ g /m3 <0.5 Chlorpyrifos 1μ g /m3 <0.02 Dibutyl phthalate 220μ g /m3 <0.02 tetradecane 330μ g /m3 0.7 Bis-(2-ethylhexyl)phthalate 120μ g /m3 <0.02 DIAZINON 0.29μ g /m3 <0.02 acetaldehyde 48μ g /m3 <2.5 FENOBUCARB 33μ g /m3 <0.02 4. Stable weight peeling <Test piece condition> Tape width: 20mm Bonding condition: One stroke with 2-kg roller Measurement condition: 23°C±5°C 60%±20%RH [Left at RT for one hour, measure the peeled off distance by 100-g load] SUS AL ABS PS Acrylic PP Peel off distance (mm) 1 hour 1.0 2.0 2.0 2.5 2.0 3.5 3 hours 1.3 3.0 3.5 5.0 3.3 7.8 5 hours 1.3 2.8 4.5 7.5 4.5 11.0 24 hours 1.5 9.5 18.5 34.0 16.0 59.0 <Results> <Stable weight peeling test> TDSー198 G9000-SY Revision in Apr., 2015 WIESON TECHNOLOGIES CO., LTD. SPECIFICATION LIST TYPE OF PRODUCT RF ANTENNA ITEM INDEX PAGE 1. THE PRODUCT SPECIFICATION LIST.......................…
Text truncated - open the document above for the full version.