2AHRDEP-AC1633USB WiFi Adapter

01. Put in the CD and find windows file “windows (xp,vista,win7,win8,win10)” andSetup.exe. 02. Double click Setup.exe file, Software begin to initialization,then click the “Next”.There shows the installation progress. 03. Do not interrupt installation, Click “finish” to finish the driver installation.The computer automatically restart. Wireless connection (two ways to realize Wireless connection 1 04.Plug the Wireless USB Adapter into the USB port of your PC 05.Click Icon in the Windows system tray, which locates in the bottom-right corner of your computer screen or double click , and pops up a message and click”Available Network” Double-click the utility icon or right click the icon ,and the Wireless Network Connection window appears then double click the SSID you preferred. 12345 USB Wireless Adapter NoteThis Manual based on Windows7 Quick Installation Guide 67 8 9 10111213 Note:if there is no icon , please find it in the on right buttom,it have been hide as following pictures shows: Wireless Connection2. 06. Click Icon which locates in the bottom-right corner of your computer screen,click the wireless network list and choose the SSID you preferred. and double click (Or click “Connect”). Type the encryption key and then click “ok”. Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click “ok”. FCC warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The USB WiFi Adapter EP-AC1633 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC/IC has established detailed SAR requirements and has established that these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin C95.1 and IEC/IEEE 62209-1528 and found to be compliant to RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body (0mm) is 1.463W/kg, IC warning - English: This device complies with Industry Canada licence- exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Operations in the 5.15-5.25GHz band are restricted to indoor usage only Les opérations dans la bande 5.15-5.25GHz sont limitées à une utilisation en intérieur uniquement The WiFi Adapter EP-AC1633 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC/IC has established detailed SAR requirements and has established that these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin C95.1 and IEC/IEEE 62209-1528 and found to be compliant to RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body (0mm) is 1.463W/kg, 14 15

Shenzhen EDUP Electronics Technology Co.,Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china Product Name: USB WiFi Adapter FCC ID: 2AHRDEP-AC1633 Model(s): EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 2.911(d)(5)(i) EquipmentType We, [Shenzhen EDUP Electronics Technology Co.,Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Zhou Chunping Date: 2024/02/03 Title and Company name: / Shenzhen EDUP Electronics Technology Co.,Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen EDUP Electronics Technology Co.,Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china Product Name: USB WiFi Adapter FCC ID: 2AHRDEP-AC1633 Model(s): EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 2.911(d)(5)(ii) Applicant filing We, [Shenzhen EDUP Electronics Technology Co.,Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Zhou Chunping Date: 2024/02/03 Title and Company name: / Shenzhen EDUP Electronics Technology Co.,Ltd. Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen EDUP Electronics Technology Co.,Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: WISE TIGER LLC FRN: 0034753145 Contact Name: Cheng Wang Address: 2827 SHADOWS EDGE COURT, Henderson, USA Henderson, NV 89052 United States Telephone No: (268) 369-5874 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2024-02-05 Signed by (Printed Name/Title): Cheng Wang / Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen EDUP Electronics Technology Co.,Ltd. FRN: 0025412040 FCC ID: 2AHRDEP-AC1633 Contact Name: Zhou Chunping Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china Telephone No: 0755-83648350 Email: [email protected] Applicant Signature: Date: 2024-02-03 Signed by (Printed Name/Title): Zhou Chunping /

Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The difference is only in model names. Production name Trade name Model no. USB WiFi Adapter N/A EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP- AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 Signature: Date: 2024/02/03 Name: Zhou Chunping Title: Company: Shenzhen EDUP Electronics Technology Co.,Ltd.

Shenzhen EDUP Electronics Technology Co.,Ltd. 2024.02.03 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR Product Name: USB WiFi Adapter FCC ID: 2AHRDEP-AC1633 Model(s): EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description - Tune-up Procedure Required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Zhou Chunping / Contact information / address: Shenzhen EDUP Electronics Technology Co.,Ltd. / 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china

Shenzhen EDUP Electronics Technology Co.,Ltd. 2024/02/03 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION Product Name: USB WiFi Adapter FCC ID: 2AHRDEP-AC1633 Model(s): EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Zhou Chunping / Contact information / address: Shenzhen EDUP Electronics Technology Co.,Ltd. / 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china

External Photos

Internal Photos TNA

No.：BCTC/RF-EMC-005 Page 1 of 102 Edition：B.0 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2401584963-6E Applicant: Shenzhen EDUP Electronics Technology Co.,Ltd. Product Name: USB WiFi Adapter Model/Type reference: EP-AC1633 Tested Date: 2024-01-22 to 2024-01-24 Issued Date: 2024-02-22 Report No：BCTC2401584963-6E No.：BCTC/RF-EMC-005 Page 2 of 102 Edition：B.0 FCC ID:2AHRDEP-AC1633 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: USB WiFi Adapter Trademark: EDUP,EDUP HOME,EDUP LOVE,WISE TIGER Model/Type Ref.: EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 Applicant: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town,Shenzhen,china Manufacturer: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town,Shenzhen,china Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhanche ng , Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-01-22 Sample tested Date: 2024-01-22 to 2024-01-24 Issue Date: 2024-02-22 SAR Max. Values is： 1.463 W/kg (1g) for Body Test Standards: IEEE Std C95.1, 2019/ IEEE Std 1528™-2013/FCC Part 2.1093 Test Results: PASS Remark: This is SAR test report Tested by: Approved by: Min Zhi Cheng/ Project Handler Zero Zhou/Reviewer Report No：BCTC2401584963-6E No.：BCTC/RF-EMC-005 Page 3 of 102 Edition：B.0 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Standards ...................................................................................................... 6 3. Test Summary ....................................................................................................... 7 4. SAR Limits............................................................................................................. 8 5. Measurement Uncertainty ..................................................................................... 9 6. Product Information and Test Setup .................................................................... 10 6.1 Product Information ............................................................................................... 10 6.2 Test Setup Configuration ....................................................................................... 12 6.3 Support Equipment ................................................................................................ 12 6.4 Test Environment .................................................................................................. 12 7. Test Facility and Test Instrument Used ............................................................... 13 7.1 Test Facility ........................................................................................................... 13 7.2 Test Instrument Used ............................................................................................ 14 8. Specific Absorption Rate (SAR) .......................................................................... 15 8.1 Introduction ............................................................................................................ 15 8.2 SAR Definition ....................................................................................................... 15 9. SAR Measurement System ................................................................................. 16 9.1 The Measurement System ..................................................................................... 16 9.2 Probe ..................................................................................................................... 16 9.3 Probe Calibration Process ..................................................................................... 18 9.4 Phantom ................................................................................................................ 19 9.5 Device Holder ........................................................................................................ 19 10. Tissue Simulating Liquids .................................................................................... 20 10.1 Composition of Tissue Simulating Liquid ............................................................. 20 10.2 Limit ..................................................................................................................... 21 10.3 Tissue Calibration Result ..................................................................................... 22 11. System Check ..................................................................................................... 23 11.1 Purpose of System Performance Check .............................................................. 23 11.2 System Setup ...................................................................................................... 23 11.3 Validation Results ................................................................................................ 24 12. EUT Testing Position ........................................................................................... 25 13. SAR Measurement Procedures ........................................................................... 26 13.1 Measurement Procedures ................................................................................... 26 13.2 Spatial Peak SAR Evaluation .............................................................................. 26 13.3 A…

Text truncated - open the document above for the full version.

东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 1 页 共 9 页 开发案号(case number)：Y2024012201 日 期(Date)：2024.01.22 版 本(Version)：A1 承 认 书 出厂签章(Factory seal)： 编写Write 审核Review 批准Approval 客户承认签章(Customer seal)： 检查Check 审核Review 批准Approval 联系方式(Contact information) Manufacturer: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town,Shenzhen,china 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 2 页 共 9 页 文件制定/修订/废止履历表(Revision/Abolition) 版本Ver 日期 Date 制定/修订内容Develop/revise content 制定 Formulate 核准 Approval A1 2024.01.22 首次制定 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 3 页 共 9 页 目录 1、封面(Cover) ······························································· 1 2、目录(Directory) ··························································· 3 3、产品图面(Product drawings) ··········································· 4 4、性能参数表(Performance parameter table) ··························· 5 5、电气性能测试报告(Electrical performance test report) ············ 6-8 6、材料成份及有害物质表(Material Composition and Hazardous Substances Table) ························································· 9 7、包装规范(Packaging specifications) ··································· 10 3、产品图面(Product drawings) 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 4 页 共 9 页 4、性能参数(Performance parameter table) 电气参数( Electrical parameters) 频率范围 ( Frequency range) 2400~5800MHz 输入阻抗 ( Impedance) 50Ω 驻波比(SWR) <2.0 增益( Gain) 2.4G≤1.5dBi 5.8G≤2.0dBi 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 5 页 共 9 页 5、电气性能测试报告(整机） (Electrical performance test report (complete machine)) 功率容量 ( Power Capacity) <10w 极化方式 ( Polarization mode) 线极化( linear polarization) 辐射方向 ( Radiation direction) 全向( Omnidirectional) 接头型号 ( Connection method) 插脚(DIP) 机械参数( mechanical parameters) 线长( Line length) 端子维持力 ( Connector strength) 同轴电缆 ( coaxial cable) 盐雾测试 ( Salt spray test) 24H 环境参数( Environmental parameters) 工作温度 ( operation temperature) -30°C~65°C 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 6 页 共 9 页  天线暗室测试数据 (Antenna darkroom test data) Freq(MHz) Gain(dBi) Efficiency(%) Freq(MHz) Gain(dBi) Efficiency(%) 2400 0.75 48.2 5150 1.46 46.24 2410 0.93 48.01 5200 1.96 49.21 2420 0.85 41.23 5250 1.05 53.42 2430 1.02 55.5 5300 1.39 46.3 2440 0.71 47.22 5350 1.32 51.61 2450 0.58 59.02 5400 1.3 54.23 2460 0.93 60.89 5450 1.12 51.78 2470 1.04 47.1 5600 1.93 55.73 2480 0.8 53.57 5700 1.75 57.63 2490 1.26 49.52 5800 1.14 53.25 2500 1.47 58.13 5850 1.25 51.71  Antenna VSWR/S11 2.4G SWR/S11 5.8G SWR/S11 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 7 页 共 9 页  天线方向图(Antenna pattern) 2.4G 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 8 页 共 9 页 5.8G 6、材料成分及有害物质表 (List of Material Composition and Hazardous Substances) 项次 item 规 格 spec 材质 material RoHS 检 验结果 (Rohs Inspection results) （PPM） ICP 检测编号 ICP Detection number 检测时间 Detection time Cd Pb Hg Cr+6 PBB PBDE 1 铁件 Iron 洋白铜 Brass ND ND ND ND ND ND NGBMR23000169901 2023/2/6 东莞市腾晨电子科技有限公司 表单编号：TENCHE-QR-EN-001 版本：B1 第 9 页 共 9 页 产品包装规范 PACKING CRITERION 产品料号(Part number)：NB03-136510 产品规格(Specifications)：内置天线-2.4G/5.8G 铁件天线 0.3mm 厚 Built in antenna -2.4G/5.8G-0.3mm thick - white copper 一、标签要求(Label requirements) （根据客户名称参考对应的成品标签制作要求，无要求即按普通标签要求） 内标签 长 50mm 宽60mm左右 外标签 长 50mm 宽60mm左右 需方 ************* 需方 ************* 供方 电子科技有限公司 供方 电子科技有限公司 物料编码 ************* 物料编码 ************* 生产单号 ***************** 生产单号 ***************** 品名规格 ******** 检验员 ** 品名规格 ******** 检验员 ** 数量/单位 ***** 日期 ****.**.* 数量/单位 ***** 日期 ****.**.* 追溯码 ******** 流水号 ** 追溯码 ******** 流水号 ** 二、装箱要求(Encasement requirements) 作业说明(Description)： 外包装： 1．内包装：吸塑盒 产品 100 PCS/层 2．外包装： 根据实际包装定数量/箱 注意事项： 1．是否要增设隔板、珍珠棉； 2．标签的贴附，如 ROHS 等；

No.：BCTC/RF-EMC-005 Page: 1 of 44 Edition：B.1 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2401584963-1E Applicant: Shenzhen EDUP Electronics Technology Co.,Ltd. Product Name: USB WiFi Adapter Test Model: EP-AC1633 Tested Date: 2024-01-02 to 2024-01-24 Issued Date: 2024-02-26 Report No.: BCTC2401584963-1E No.：BCTC/RF-EMC-005 Page: 2 of 44 Edition：B.1 FCC ID:2AHRDEP-AC1633 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: USB WiFi Adapter Trademark: EDUP,EDUP HOME,EDUP LOVE,WISE TIGER Model/Type Reference: EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 Prepared For: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china Manufacturer: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road, Liantang Industrial Area, Buji Town, Shenzhen,china Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-01-02 Sample Tested Date: 2024-01-02 to 2024-01-24 Issue Date: 2024-02-26 Report No.: BCTC2401584963-1E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2401584963-1E No.：BCTC/RF-EMC-005 Page: 3 of 44 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table of parameters of text software setting ....................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT Operating Conditions .................................................................................. 13 6.5 Test Result .......................................................................................................... 14 7. Radiated Emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 23 8.1 Block Diagram Of Test Setup .............................................................................. 23 8.2 Limit .................................................................................................................... 23 8.3 Test Procedure ................................................................................................... 24 8.4 EUT Operating Conditions .................................................................................. 25 8.5 Test Result .......................................................................................................... 25 9. Power Spectral Density Test ............................................................................... 26 9.1 Block Diagram Of Test Setup .............................................................................. 26 9.2 Limit .................................................................................................................... 26 9.3 Test procedure ....................................................…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page: 1 of 79 Edition：B.1 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2401584963-3E Applicant: Shenzhen EDUP Electronics Technology Co.,Ltd. Product Name: USB WiFi Adapter Test Model: EP-AC1633 Tested Date: 2024-01-02 to 2024-01-24 Issued Date: 2024-02-22 Report No.: BCTC2401584963-3E No.：BCTC/RF-EMC-005 Page: 2 of 79 Edition：B.1 FCC ID:2AHRDEP-AC1633 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: USB WiFi Adapter Trademark: EDUP,EDUP HOME,EDUP LOVE,WISE TIGER Model/Type Reference: EP-AC1633,EP-AC1661ES,EP-AC1661Pro,EP-AC1661S,EP-AC1661GS, EP-AC1633S,EP-AC1662,EP-AC1661 Prepared For: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town,Shenzhen,china Manufacturer: Shenzhen EDUP Electronics Technology Co.,Ltd. Address: 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town,Shenzhen,china Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-01-02 Sample Tested Date: 2024-01-02 to 2024-01-24 Issue Date: 2024-02-22 Report No.: BCTC2401584963-3E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is WIFI-2.4GHz band radio test report. Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2401584963-3E No.：BCTC/RF-EMC-005 Page: 3 of 79 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ......................................................................................................…

Text truncated - open the document above for the full version.