2AIB7M6iSteady M6 3-Axis Smartphone Stabilizer with Bluetooth

User Manual V1.1 Contents Mounting the Phone Balancing the Phone Powering on & Standby Installing Magnetic AI Vision Sensor 5 6 8 8 01 Product List 02 Get to Know iSteady M6 03 Battery and Charging 04 Download the App Hohem Joy 05 Mounting, Balancing and Powering on 1 2 3 4 5 On-board Features Modes Description Manual Tilt Adjustment 11 14 15 How to Connect APP Features 17 18 Calibration Reasons and How to Calibrate Firmware Update 19 20 11 Specifications 12 Disclaimer 21 22 Warranty Terms Warranty Card 13 Warranty Terms 23 10 Auto Calibration and Firmware Update 19 08 OLED Display 15 06 How to Enable the AI Tracking 9 07 How to Use the Gimbal 11 09 How to Use the APP 17 23 24 01 01 Product List iSteady M6Fill Light with AI Vision Sensor Tripod USB-C to USB-C CableUSB-C Charging Cable Carrying Case User Manual * Sold separately 02 02 Get to Know iSteady M6 1. Magnetic Fill Light with AI Vision Sensor * Sold separately 2. Magnetic Alignment 3. Phone Clamp 4. 1/4"-20 UNC Port 5. Roll Axis Lock Pin 6. Pan Motor 7. Multifunctional Control Wheel 8. Buttons for A-B Motion 9. Joystick 10. Handle 11. Tripod 12. Tilt Motor 13. OLED Display 14. M (Mode) Button 15. Zoom Lever 16. Shutter Button 17. DC out Port for Phones 18. Roll Axis Arm 19. USB-C Charging Port 20. Power Button 21. 1/4"-20 UNC Port 22. Clamp Rotation Axis 23. Roll Axis Arm Latch 24. Roll Motor 25. Pan Axis Latch 26. Trigger 1 2 16 17 3 4 5 6 7 8 9 10 11 22 21 23 24 12 13 15 14 18 19 20 25 26 03 03 Battery and Charging For smartphone charging when the gimbal is off, please press the power button once to start charging. Charging Method:To charge the iSteady M6, connect a USB adapter (not included, choose 5V-2A for better results) into the charging port with the provided USB-C charging cable. Please fully charge the iSteady M6 before using it for the first time. Power Button Charging Display: The battery is fully charged when the battery levels reach the highest point as shown on the OLED display. Reverse Charging (DC out charging for smartphones) Android: Charging with the provided USB-C to USB-C cable. iOS: Charging with USB-C to Lightning cable (Not Included). 04 04 Download the App Hohem Joy Scan the QR code or search "Hohem Joy" in APP Store or Google Play to download. * The app Hohem Joy requires iOS 10.0 or later, Android 6.0 or later. Download on the Get it on ○ Items marked "*" are optional accessories which are sold separately. ○ Mount your mobile phone before powering on the iSteady M6. ○ If no mobile phone is detected or the motor is overloaded because the phone is not balanced well, the gimbal will shut down after a warning beeping. 05 05 Mounting, Balancing and Powering on Mounting the Phone ❶ Unlock the roll axis and pan axis to ensure movable arms. ❷ Mounting in Landscape Mode: Make sure the camera direction is the same as shown in the image below and keep the phone clinging to the rubber pads. ❸ Mounting in Portrait Mode: Rotate the clamp by 90° to the right as shown in the image below and make sure it is in the middle of the mobile phone. 90° 06 Balancing the Phone ❶ Unlock the roll axis arm latch and push the arm to the left or right until the phone is steady and almost at level with the ground. Then tighten the latch. ❷ For balancing in the portrait mode, keep the phone balanced centrally in the phone clamp. 07 Quick Switch to Portrait Mode Switch to portrait mode by rotating the handle as shown in the image below and then hold the gimbal like a flashlight. * After switching to portrait mode in this way, the joystick will only allow your camera to move left or right. Note that the gimbal should be held horizontally when in quick portrait mode; It is not available in POV mode. 08 Powering On & Standby Power Button Installing Magnetic AI Vision Sensor * Sold separately Magnetic Installation ❶ ❷ 1. Press and hold for 3 seconds - Power on/off 2. When Powered On Press twice: Enter the standby mode Press once: Wake up the gimbal 3. Ultra-Wide-Angle Shot Default mode as shown in the image 1: There's no obstruction in front of phone screen. Ultra-wide-angle shot mode as shown in the image 2: Switch to this mode by pressing trigger four times and the roll motor will be in front of phone screen for capturing unobstructed views. 09 06 How to Enable the AI Tracking 1. Enable the AI vision sensor: Switch to "ON". (Indicator light turns red with fill light flashing twice.) 2. Gesture Control: Show gestures to the AI vision sensor from 0.5~1.5m (1.64ft-4.92ft) away. 3. Gesture " " to start the AI tracking (Indicator light turns green). 4. Gesture " " to stop the AI tracking (Indicator light turns red). 5. AI tracking for front/rear camera: For front camera tracking, align the magnetic AI vision sensor with the phone screen. Place the vision sensor in the opposite direction for rear camera tracking. It is completely normal for the magnetic alignment to become hot when the fill light is in use and hence, it is advisable NOT to make a direct contact with the hot alignment, especially the metallic part. * AI vision sensor sold separately 10 * FAQ: How to make AI vision positioning adjustments? (Customized Composition) If the framed subject cannot be centered on the phone screen, or you want to customize the AI vision position to be tracked: 1. Make sure the gimbal & AI vision sensors are on. 2. Take the gesture " " towards the AI vision sensor and and the indicator light will quickly blink in green color. 3. Move in front of the screen until you find the preferred position to be tracked. 4. Show the gesture " "to lock the position and create the ideal composition (the indicator light will stop flashing). 11 07 How to Use the Gimbal On-board Features Power button Press and hold for 3 seconds: Power on/off * When Powered On Press twice: Enter the standby mode Press once: Wake up the gimbal Joystick Push the joystick up & down: Tilt rotation control Push the joystick left & right: Pan rotation control M button Press once: Switch betwee…

Text truncated - open the document above for the full version.

FCC ID: 2AIB7M6 External Photos Stabilizer 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view Magnetic AI Vision Sensor 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

1、 Label 2、 Label location

FCC ID: 2AIB7M6 Internal Photos 1. EUT uncover view 2. Antenna view Bluetooth Antenna

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 9 REPORT No.：SZ22110217S01 RF EXPOSURE EXEMPT REPORT APPLICANT : Shenzhen Hohem Technology Co., Ltd. PRODUCT NAME : iSteady M6 3-Axis Smartphone Stabilizer MODEL NAME : iSM6K, iSM6, iSteady M6 Kit, iSteady M6 BRAND NAME : hohem FCC ID : 2AIB7M6 STANDARD(S) : 47 CFR Part 2(2.1093) RECEIPT DATE : 2022-11-22 TEST DATE :2023-02-16 to 2023-02-28 ISSUE DATE :2023-03-28 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 9 REPORT No.：SZ22110217S01 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2 Equipment Under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 3. RF Output Power ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 4. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Annex A Testing Laboratory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 Change History Version Date Reason for change 1.0 2023-03-28 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 9 REPORT No.：SZ22110217S01 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Shenzhen Hohem Technology Co., Ltd. Applicant Address: B106,University Creative Park,Xili,Nanshan,Shenzhen,China Manufacturer: Shenzhen Hohem Technology Co., Ltd. Manufacturer Address: B106,University Creative Park,Xili,Nanshan,Shenzhen,China 1.2 Equipment Under Test (EUT) Description Product Name: iSteady M6 3-Axis Smartphone Stabilizer Sample No.: 5# Hardware Version: V1.00 Software Version: V1.001 Equipment Type: Bluetooth LE Bluetooth Version: 5.3 Operating Frequency Range: 2402MHz-2480MHz Modulation Type: GFSK(1Mbps, 2Mbps) Antenna Type: PCB Antenna Antenna Gain: -2.16dBi Note 1: According to the certificate holder, they declared that the models iSM6K, iSM6, iSteady M6 Kit and iSteady M6 have the same hardware and software, only different in model name and iSM6K, iSteady M6 Kit have Magnetic AI Vision Sensor, iSM6, iSteady M6 doesn’t have the Magnetic AI Vision Sensor, all RF parameters remain the same. The main measuring model is iSM6K, only the results for iSM6K were recorded in this report. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 9 REPORT No.：SZ22110217S01 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Method Determination /Remark 47 CFR Part 2(2.1093) Radio Frequency Radiation Exposure Assessment: Portable devices No deviation KDB 447498 D04v01 RF Exposure Procedures and Equipment Authorization Policies for Mobile and Portable Devices No deviation Note 1: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 2: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 9 REPORT No.：SZ22110217S01 2. Device Category and RF Exposure Limit Per user manual, based on 47 CFR 2.1093, this device belongs to portable device category with General Population/Uncontrolled exposure. Portable Devices: 47 CFR 2.1093(b) For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. General Population/Uncontrolled Exposure: 47 CFR 2.1093(d) (2) Limits for General Population/Uncontrolled exposure: 0.08 W/kg as averaged over the whole-body and spatial peak SAR not exceeding 1.6 W/kg as averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are …

Text truncated - open the document above for the full version.

NOTE:ThisdocumentisissuedbyShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,thetestreportshallnotbereproducedexceptin fullwithoutpriorwrittenpermissionofthecompany.Thetestresultsapplyonlytotheparticularsample(s)testedandtothespecifictestscarried outwhichisavailableonrequestforvalidationandinformationconfirmedatourwebsite. MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page1of 13 REPORTNo.：SZ21080442E10A TESTREPORT APPLICANT:HohemTechnologyCo.,Ltd. PRODUCTNAME:Splashproof3-AxisActionCameraGimbal MODELNAME:iSteadyPro4 TRADENAME: hohem BRANDNAME:hohem STANDARD(S):ANSI/IEEEStd149-2008 RECEIPTDATE:2021-10-14 TESTDATE:2021-10-18 ISSUEDATE:2023-03-13 Editedby: : KeZhiqing(Rapporteur) Approvedby: : ChiShide(Supervisor) Testedby MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page2of13 REPORTNo.：SZ21080442E10A DIRECTORY 1.TechnicalInformation ........................................................................................................3 1.1.ApplicantandManufacturerInformation ....................................................................3 1.2.EquipmentUnderTest(EUT)Description...................................................................3 2.TestResults........................................................................................................................4 2.1.AppliedReferenceDocuments.....................................................................................4 2.2.TestConditions...............................................................................................................4 2.3.MeasurementUncertainty.............................................................................................4 2.4.TestResultslists.............................................................................................................5 AnnexATestSetupPhotos..................................................................................................6 AnnexBFigures .....................................................................................................................7 1.2DRadiationPattern .........................................................................................................7 2.3DRadiationPattern .........................................................................................................9 AnnexCEUTPhotos ...........................................................................................................11 AnnexDGeneralInformation .............................................................................................13 1.1IdentificationoftheResponsibleTestingLaboratory..............................................13 1.2IdentificationoftheResponsibleTestingLocation..................................................13 1.3TestEquipmentsUtilized..............................................................................................13 ChangeHistory VersionDateReasonforchange 1.0 2023-03-13 Firstedition MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page3of13 REPORTNo.：SZ21080442E10A 1.TechnicalInformation Note:Providebymanufacturer. 1.1.ApplicantandManufacturerInformation Applicant:HohemTechnologyCo.,Ltd. ApplicantAddress:B106,UniversityCreativePark,Xili,Nanshan,Shenzhen,China Manufacturer:HohemTechnologyCo.,Ltd. ManufacturerAddress:B106,UniversityCreativePark,Xili,Nanshan,Shenzhen,China 1.2.EquipmentUnderTest(EUT)Description WirelessTypeBluetooth Testfrequencyband2400MHz-2500MHz Brandnamehohem AntennamodeliSteadyPro4 HardwareVersionV1.00 SoftwareVersionV1.001 IMEIN/A Samplenumber2# Dimensions: Note1:TheoriginalreportSZ21080442E10hasbeenreplacedbytheSZ21080442E10A. Note2:ThesamplephotosshallbeprovidedseparatelyinAnnexCaccordingtocustomer requirements. MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page4of13 REPORTNo.：SZ21080442E10A 2.TestResults 2.1.AppliedReferenceDocuments Leadingreferencedocumentsfortesting: No.IdentityDocumentTitle 1 ANSI/IEEEStd149-2008 IEEEStandardTestProceduresforAntennas 2.2.TestConditions TestEnvironmentConditions： RelativeHumidity:25...75% Temperature:+10°Cto+30°C 2.3.MeasurementUncertainty Theuncertaintyiscalculatedusingthemethodssuggestedinthe"GuidetotheExpressionof UncertaintyinMeasurement"(GUM)publishedbyISO. ItemMeasurementUncertainty(dB) Gain±0.5 VSWR±0.2 MeasurementUncertainty(95%ConfidenceInterval)K=2 MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page5of13 REPORTNo.：SZ21080442E10A 2.4.TestResultslists 2.4.1. Gain FrequencyGain(dBi) 2400MHz-6.22 2410MHz -5.42 2420MHz-5.27 2430MHz -4.57 2440MHz-4.49 2450MHz -3.82 2460MHz-4.17 2470MHz -4.08 2480MHz-3.94 2490MHz -2.92 2500MHz-2.16 MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page6of13 REPORTNo.：SZ21080442E10A AnnexATestSetupPhotos MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA…

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 72 REPORT No.：SZ22110217W01 TEST REPORT APPLICANT : Shenzhen Hohem Technology Co., Ltd. PRODUCT NAME : iSteady M6 3-Axis Smartphone Stabilizer MODEL NAME : iSM6K, iSM6, iSteady M6 Kit, iSteady M6 BRAND NAME :hohem FCC ID :2AIB7M6 STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2022-11-22 TEST DATE :2023-02-16 to 2023-02-28 ISSUE DATE :2023-03-28 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 72 REPORT No.：SZ22110217W01 DIRECTORY 1. Summary of Test Result ················································································ 4 1.1. Testing Applied Standards ·········································································· 5 1.2. Test Equipment List ··················································································· 6 1.3. Measurement Uncertainty ··········································································· 8 1.4. Testing Laboratory ····················································································· 8 2. General Description ····················································································· 9 2.1. Information of Applicant and Manufacturer ··················································· 9 2.2. Information of EUT ····················································································· 9 2.3. Channel List of EUT ·················································································· 10 2.4. Test Configuration of EUT ·········································································· 11 2.5. Test Conditions ························································································ 11 2.6. Test Setup Layout Diagram ········································································ 11 3. Test Results ······························································································· 14 3.1. Antenna Requirement ··············································································· 14 3.2. Duty Cycle of Test Signal ··········································································· 15 3.3. Maximum Peak Conducted Output Power ···················································· 16 3.4. Maximum Average Conducted Output Power ··············································· 17 3.5. 6 dB Bandwidth ························································································ 18 3.6. Conducted Spurious Emissions and Band Edge ··········································· 19 3.7. Power Spectral Density ············································································· 20 3.8. Conducted Emission ················································································· 21 3.9. Restricted Frequency Bands ······································································ 22 3.10. Radiated Emission ···················································································· 23 Annex A Test Data and Result ·········································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 72 REPORT No.：SZ22110217W01 Change History Version Date Reason for change 1.0 2023-03-28 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 72 REPORT No.：SZ22110217W01 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Feb. 16, 2023 He Yuyang PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Feb. 16, 2023 He Yuyang PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Feb. 16, 2023 He Yuyang PASS No deviation 5 15.247(a) Bandwidth Feb. 16, 2023 He Yuyang PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Feb. 16, 2023 He Yuyang PASS No deviation 7 15.247(e) Power Spectral Density Feb. 16, 2023 He Yuyang PASS No deviation 8 15.207 Conducted Emission Feb. 13, 2023 Fan Zehang PASS No deviation 9 15.247(d) Restricted Frequency Bands Feb. 22, 2023 Su Zhan PASS No deviation 10 15.209, 15.247(d) Radiated Emission Feb. 22, 2023 Su Zhan PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSIC63.10-2013 and KDB558074 D01 v05r02. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 3: When the test result is a critical val…

Text truncated - open the document above for the full version.

FCC ID: 2AIB7M6 Test Setup Photos 1. Conducted emission main’s port front view 2. Conducted emission main’s port side view 3. Radiated emission (9KHz-30MHz) 4. Radiated emission (30MHz-1GHz) 5. Radiated emission (above 1GHz) 6. RF measurement setup (Bluetooth LE)