2AJGM-P52UVGMRS Two way radio

USER’S MANUAL Model: P52UV ______________________________ PREFACE Thank you for purchasing P52UV GMRS Radio, which is a dual band/dual display radio/dual watch. This easy-to-use radio will deliver you secure, instant and reliable communications at peak efficiency. Please read this manual carefully before use. The information presented herein will help you to derive maximum performance from your radio. This manual is applicable to the following product: P52UV,P52IC,BF-A58,UV-9R,GT-3WP, UV82WP,GMRS-9R and UV58X GMRS Radio. Table of Contents 1. GETTING STARTED 1.1 Regulations and Safety Warnings 1.2 Main features 1.3 Maintenance 1.4 Programming software (optional) 1.5 Content of the packaging 2. BATTERY INFORMATION 2.1 Charging the Battery Pack 2.2 Charger Supplied 2.3 Use Caution with the Li-ion Battery 2.4 How to Charge 2.5 LED Indicator 2.6 How to Store the Battery 3. INSTALLATION OF ACCESSORIES 3.1 Installing / Removing the Antenna 3.2 Installing the belt clip 3.3 Installing the battery pack 3.4 Additional Speaker/Microphone (Optional) 4. RADIO OVERVIEW 4.1 Buttons and controls of the radio 4.2 Main controls and parts of the radio 4.3 Status Indications 4.4 Main keypad controls 5. BASIC OPERATIONS 5.1 Power on the radio 5.2 Adjusting the volume 5.3 Making a call 5.4 Channel selection 5.5 Frequency (VFO) mode 5.6 Channel (MR) mode 6. ADVANCED FEATURES 6.1 Frequency scanning 6.2 Channel scanning 6.3 Search CTCSS/DCS Code 6.4 Cursor▼▲Conversion (A/B) 6.5 High/low power fast selection 6.6 Keypad lock 6.7 FM Radio (FM) 6.8 Flashlight 6.9 1000Hz, 1450Hz, 1750Hz Tone-burst 6.10 Manual Programming (Channels Memory) 6.11 Repeaters Programming 7. WORKING THE MENU SYSTEM 7.1 Basic use 7.2 Using short-cuts 7.3 Functions and operations (1) Squelch level (SQL) - MENU No.0 (2) Step frequency (STEP) - MENU No.1 (3) Output power (TXP) - MENU No.2 (4) Battery save (SAVE) - MENU No.3 (5) VOX Function (VOX) - MENU No.4 (6) Wide/Narrow bandwidth (WN) - MENU No.5 (7) Backlight (ABR) - MENU No. 6 (8) Dual Watch Operation (TDR) - MENU No. 7 (9) Keypad beep (BEEP) - MENU No. 8 (10) Time-Out-Timer (TOT) - MENU No.9 (11) Receiving DCS (R-DCS) - MENU No.10 (12) Receiving CTCSS (R-CTCSS) - MENU No.11 (13) Transmitting DCS - (T-DCS) - MENU No.12 (14) Transmitting CTCSS (T-CTCSS) - MENU No.13 (15) Voice function (VOICE) - MENU No. 14 (16) ANI-ID (ANI-ID) - MENU No.15 (17) DTMFST (DTMFST) - MENU No.16 (18) Signal code (S-CODE) - MENU No.17 (19) SCAN Resume Mode (SC-REV) - MENU No.18 (20) PTT-ID (PTT-ID) - MENU No.19 (21) PTT ID delay (PTT-LT) - MENU No.20 (22) Channel A Display Mode (MDF-A) - MENU No.21 (23) Channel B Display Mode (MDF-B) - MENU No.22 (24) Busy Channel Lock (BCL) - MENU No. 23 (25) Auto Keypad Lock (AUTOLK) - MENU No.24 (26) Frequency offset direction (SFT-D) - MENU No.25 (27) Frequency offset (OFFSET) - MENU No. 26 (28) Channel store - (MEM-CH) - MENU No. 27 (29) Channel Delete (DEL-CH) - MENU No.28 (30) Standby backlight (WT-LED) - MENU No.29 (31) RX backlight (RX-LED) - MENU No. 30 (32) TX backlight (TX-LED) - MENU No.31 (33) Alarm Mode (AL-MOD) - MENU No.32 (34) Dual Watch (TDR-AB) - Menu No.34 (35) Side tone elimination (STE) - Menu No. 35 (36) Side tone elimination in communication through repeater (RP-STE) - Menu No. 36 (37) Delay time of side tone elimination in communication through repeater (RPT-RL) - Menu No.37 (38) Display mode at the turning on (PONMSG) Menu No.38 (39) Roger beep (ROGER) - Menu No. 39 (40) Reset (RESET) - Menu No.40 (41) Repeater Tone (R-TONE) - Menu No.41 8. ON-LINE SERVICE AND SUPPORT Appendix A. – Trouble shooting guide Appendix B. - Technical Specifications Appendix D. - GMRS Frequency Chart (MHz) Appendix D. - Weather Channel Assignments Appendix C. - Shortcut Menu operations 1. GETTING STARTED 1.1 Regulations and Safety Warnings ATTENTION! To help you ward off bodily injury or property loss that may arise from improper operation, please read all the information carefully before using our products. This contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Verification of harmful interference by this equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBIITED UNDER FCC RULES AND FEDERRAL LAW. WARNING! Read this information before using the radio. In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard prev…

Text truncated - open the document above for the full version.

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Agent Authorization Company: PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address: 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Product Name: Two way radio Model Number(s): P52UV, P52IC, BF-A58, UV-9R, GT-3WP, UV82WP, GMRS-9R, UV58X Product Description: GMRS Two way radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jan. 12, 2021 Name: Peter Wang Title: General Manager Company: PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Jan. 12, 2021 To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation statement regarding the Mobile Radio frequency Applicant: PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: 2AJGM-P52UV Dear Sir or Madam I attest that the product has one antenna, one battery capacity, one body-worn and audio accessory. And that the product could program the frequency on computer through interface by manufacturer, is incapable of tuning, or readily being altered, by the end-user. Please contact the undersigned if you have any questions or need any further information. Regards Signature: Name, Job Title and Dept.: Peter Wang / General Manager

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Jan. 12, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2AJGM-P52UV Models: P52UV, P52IC, BF-A58, UV-9R, GT-3WP, UV82WP, GMRS- 9R, UV58X To Whom It May Concern: We, The PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY hereby declare that the model : P52IC, BF-A58, UV-9R, GT- 3WP, UV82WP, GMRS-9R, UV58X is identical with the model : P52UV, except the model name & front shell design. Except for the different above, no other modification is performed. Sincerely, PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Signature: [Peter Wang, General Manager]

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 12, 2021 Subject; Request for Confidentiality FCC ID: 2AJGM-P52UV To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Peter Wang Title: General Manager

External Photos ALL VIEW OF SERIAES MODEL ALL VIEW OF SERIES MODEL-BACK VIEW ALL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location 15mm*15mm FCC ID: 2AJGM-P52UV

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT Antenna INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT INTERNAL VIEW-6 OF EUT

Page: 1 of 28 TEST REPORT Report No. ...................................... : CHTEW21010030 Report verificaiton: Project No. ...................................... : SHT2101000401EW FCC ID ............................................. : 2AJGM-P52UV Applicant’s name ........................... : PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address ............................................. : 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Test item description .................... : Two way radio Trade Mark ....................................... : BAOFENG,POFUNG Model/Type reference ....................... : P52UV Listed Model(s) ................................. : P52IC,BF-A58,UV-9R,GT-3WP,UV82WP, GMRS-9R,UV58X Standard ......................................... : FCC 47 CFR Part2.1093 IEEE Std C95.1, 1999 Edition IEEE 1528: 2013 Date of receipt of test sample.........: Jan.04, 2021 Date of testing.............................: Jan.05, 2021- Jan.11, 2021 Date of issue...............................: Jan.12, 2021 Result .................. ........................: PASS Compiled by ( position+printed name+signature) .. : File administrators: Fanghui Zhu Supervised by ( position+printed name+signature) .. : Test Engineer: Patrick Qiu Approved by ( position+printed name+signature) .. : Manager: Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely correspond to the test sample. Report No.: CHTEW21010030 Page: 2 of 28 Issued: 2021-01-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Contents 1. Statement of Compliance 3 2. Test Standards and Report version 4 2.1. Test Standards 4 2.2. Report version 4 3. Summary 5 3.1. Client Information 5 3.2. Product Description 5 3.3. Radio Specification Description 5 3.4. Test frequency list 6 3.5. Testing Laboratory Information 7 3.6. Environmental conditions 7 4. Equipments Used during the Test 8 5. Measurement Uncertainty 9 6. SAR Measurements System Configuration 10 6.1. SAR Measurement Set-up 10 6.2. DASY5 E-field Probe System 11 6.3. Phantoms 12 6.4. Device Holder 12 7. SAR Test Procedure 13 7.1. Scanning Procedure 13 7.2. Data Storage and Evaluation 15 8. Position of the wireless device in relation to the phantom 17 8.1. Front-of-face 17 8.2. Body Position 17 9. Dielectric Property Measurements & System Check 18 9.1. Tissue Dielectric Parameters 18 9.2. SAR System Validation 19 9.3. System Check 20 10. SAR Exposure Limits 23 11. Radiated Power Measurement Results 23 12. Maximum Tune-up Limit 23 13. SAR Measurement Results 24 14. Test Setup Photos 25 15. External Photos of the EUT 26 Report No.: CHTEW21010030 Page: 3 of 28 Issued: 2021-01-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 1. Statement of Compliance Maximum Reported SAR (W/kg @1g) RF Exposure Conditions TNF Front of face(Dist.= 25mm) 1.595 Body-worn(Dist.= 0mm) 1.589 This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6 W/kg) specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992, and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and FCC KDB publications. Report No.: CHTEW21010030 Page: 4 of 28 Issued: 2021-01-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 2. Test Standards and Report version 2.1. Test Standards The tests were performed according to following standards: FCC 47 Part 2.1093: Radiofrequency Radiation Exposure Evaluation:Portable Devices IEEE Std C95.1, 1999 Edition: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE Std 1528™-2013: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. FCC published RF exposure KDB procedures: KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04: SAR Measurement Requirements for 100 MHz to 6 GHz KDB 865664 D02 RF Exposure Reporting v01r02: RF Exposure Compliance Reporting and Documentation Considerations KDB 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies TCB workshop: April, 2019; Page 19, Tissue Simulating Liquids (TSL) 2.2. Report version Revision No. Date of issue Description N/A 2021-01-12 Original Report No.: CHTEW21010030 Page: 5 of 28 Issued: 2021-01-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 3. Summary 3.1. Client Information Applicant: PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address: 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Manufacturer: PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address: 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Factory: PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address: 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong 3.2. Product Description Main unit Name of EUT: Two way radio Trade mark: BAOFENG,POFUNG Model/Type reference: P52UV Listed model(s): P52IC,BF-A58,UV-9R,GT-3WP,UV82WP, GMRS-9R,UV58…

Text truncated - open the document above for the full version.

Appendix B: DAE and Probe Calibration Certificate 11 of 12 Appendix B: DAE and Probe Calibration Certificate 12 of 12 Appendix C: Dipole Calibration Certificate 1 of 9 1.1. D450V3 Dipole Calibration Certificate Appendix C: Dipole Calibration Certificate 2 of 9 Appendix C: Dipole Calibration Certificate 3 of 9 Appendix C: Dipole Calibration Certificate 4 of 9 Appendix C: Dipole Calibration Certificate 5 of 9 Appendix C: Dipole Calibration Certificate 6 of 9 Appendix C: Dipole Calibration Certificate 7 of 9 Appendix C: Dipole Calibration Certificate 8 of 9 Appendix C: Dipole Calibration Certificate 9 of 9 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Head Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-23 -21.1 59.6 -0.2 2019-02-15 -21.8 -3.32 59.1 0.5 -0.8 0.6 2020-01-22 -21.8 -3.32 58.8 0.8 -0.5 0.3 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5ohm of prior calibration. Therefore the verification result should support extended calibration.

Page 1 of 53 FCC Test Report Report No.:AGC02294200804FE10 FCC ID : 2AJGM-P52UV PRODUCT DESIGNATION : Two way radio BRAND NAME : BAOFENG, POFUNG MODEL NAME : P52UV, P52IC, BF-A58, UV-9R, GT-3WP, UV82WP, GMRS-9R, UV58X APPLICANT : PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY DATE OF ISSUE : Jan. 28, 2021 STANDARD(S) : FCC Part 95 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.:AGC02294200804FE10 Page 2 of 53 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 28, 2021 Valid Initial release Report No.:AGC02294200804FE10 Page 3 of 53 VERIFICATION OF COMPLIANCE Applicant PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong manufacturer PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Factory PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY Address 3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong Product Designation Two way radio Brand Name BAOFENG, POFUNG Test Model P52UV Series Model P52IC, BF-A58, UV-9R, GT-3WP, UV82WP, GMRS-9R, UV58X Difference Description Only model & front shell design are different Deviation No any deviation from the test method Condition of Test Sample Normal Date of Test Nov. 01, 2020~Jan. 28, 2021 Test Result PASS Report Template AGCRT-US-PTT/RF WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in TIA/EIA 603-E. The sample tested as described in this report is in compliance with the FCC Rules Part 95 requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Donjon Huang (Project Engineer) Jan. 28, 2021 Reviewed By Calvin Liu (Reviewer) Jan. 28, 2021 Approved By Forrest Lei Authorized Officer Jan. 28, 2021 Report No.:AGC02294200804FE10 Page 4 of 53 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 6 1.1 PRODUCT DESCRIPTION ........................................................................................................................ 6 1.2 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 1.3 TEST METHODOLOGY............................................................................................................................... 8 1.4 ADDRESS OF THE TEST LABORATORY .................................................................................................. 8 1.5 TEST FACILITY ........................................................................................................................................... 8 1.6 SPECIAL ACCESSORIES ........................................................................................................................... 9 1.7 EQUIPMENT MODIFICATIONS .................................................................................................................. 9 1.8 ANTENNA REQUIREMENT ........................................................................................................................ 9 2. SYSTEM TEST CONFIGURATION ................................................................................................................ 10 2.1 EUT CONFIGURATION ........................................................................................................................... 10 2.2 EUT EXERCISE ........................................................................................................................................ 10 2.3 CONFIGURATION OF TESTED SYSTEM .............................................................................................. 10 2.4 MEASUREMENT UNCERTAINTY ............................................................................................................ 11 3. SUMMARY OF TEST RESULTS .................................................................................................................... 12 4. DESCRIPTION OF TEST MODES ................................................................................................................. 14 5. FREQUENCY TOLERANCE .......................................................................................................................... 15 5.1 PROVISIONS APPLICABLE ..................................................................................................................... 15 5.2 MEASUREMENT PROCEDURE .............................................................................................................. 15 5.3 TEST SETUP BLOCK DIAGRAM ............................................................................................................. 16 5.4TEST RESULT ............................................................................................................................................ 17 6. EMISSION BANDWIDTH ............................................................................................................................... 19 6.1 PROVISIONS APPLICABLE ..................................................................................................................... 19 6.2 MEASUREMENT PROCEDURE .............................................................................................................. 19 6.3 TEST SETUP BLOCK DIAGRAM ............................................................................................................. 19 6.4 MEASUREMENT RESULT ........................................................................................................................ 21 7. UNWANTED RADIATION ...............................................................…

Text truncated - open the document above for the full version.

Page 1 of 11 Report No.: AGC02294200804AP01 PRODUCT DESIGNATION : Two way radio BRAND NAME : BAOFENG, POFUNG MODEL NAME : P52UV, P52IC, BF-A58, UV-9R, GT-3WP, UV82WP, GMRS-9R, UV58X APPLICANT : PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY DATE OF ISSUE : Dec. 12, 2020 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd EUT PHOTO Report No.: AGC02294200804AP01 Page 2 of 11 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 12, 2020 Valid Initial Release Report No.: AGC02294200804AP01 Page 3 of 11 PHOTO GRAPHS OF EUT ALL VIEW OF SERIAES MODEL ALL VIEW OF SERIES MODEL-BACK VIEW Report No.: AGC02294200804AP01 Page 4 of 11 ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC02294200804AP01 Page 5 of 11 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC02294200804AP01 Page 6 of 11 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC02294200804AP01 Page 7 of 11 RIGHT VIEW OF EUT OPEN VIEW-1 OF EUT Report No.: AGC02294200804AP01 Page 8 of 11 OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT Report No.: AGC02294200804AP01 Page 9 of 11 INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT Antenna Report No.: AGC02294200804AP01 Page 10 of 11 INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT Report No.: AGC02294200804AP01 Page 11 of 11 INTERNAL VIEW-6 OF EUT ---END OF REPORT--- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. The non-CMA report issued by AGC is only permitted to be used by the client as internal reference use and shall not be used for public demonstration purpose. 5. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 6. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 7. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 8.Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 9. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 10. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

Test Setup Photos RADIATED EMISSION TEST SETUP RADIATED EMISSION ABOVE 1G TEST SETUP

Test Setup Photos Liquid depth in the ELI Phantom Front-of-face(25mm) Body-worn(0mm)