2AJGM-UV9GGMRS Two way radio

USER’S MANUAL Model: UV-9G ___________________________ ___ PREFACE Thank you for purchasing P52UV GMRS Radio, which is a dual band/dual display radio/dual watch. This easy-to-use radio will deliver you secure, instant and reliable communications at peak efficiency. Please read this manual carefully before use. The information presented herein will help you to derive maximum performance from your radio. This manual is applicable to the following product: UV-9G, GMRS-9R, GM-56, GM-57WP, P52UV GMRS Radio. Table of Contents 1. GETTING STARTED 1.1 Regulations and Safety Warnings 1.2 Main features 1.3 Maintenance 1.4 Programming software (optional) 1.5 Content of the packaging 2. BATTERY INFORMATION 2.1 Charging the Battery Pack 2.2 Charger Supplied 2.3 Use Caution with the Li-ion Battery 2.4 How to Charge 2.5 LED Indicator 2.6 How to Store the Battery 3. INSTALLATION OF ACCESSORIES 3.1 Installing / Removing the Antenna 3.2 Installing the belt clip 3.3 Installing the battery pack 3.4 Additional Speaker/Microphone (Optional) 4. RADIO OVERVIEW 4.1 Buttons and controls of the radio 4.2 Main controls and parts of the radio 4.3 Status Indications 4.4 Main keypad controls 5. BASIC OPERATIONS 5.1 Power on the radio 5.2 Adjusting the volume 5.3 Making a call 5.4 Channel selection 5.5 Frequency (VFO) mode 5.6 Channel (MR) mode 6. ADVANCED FEATURES 6.1 Frequency scanning 6.2 Channel scanning 6.3 Search CTCSS/DCS Code 6.4 Cursor▼▲Conversion (A/B) 6.5 High/low power fast selection 6.6 Keypad lock 6.7 FM Radio (FM) 6.8 Flashlight 6.9 1000Hz, 1450Hz, 1750Hz Tone-burst 6.10 Manual Programming (Channels Memory) 6.11 Repeaters Programming 7. WORKING THE MENU SYSTEM 7.1 Basic use 7.2 Using short-cuts 7.3 Functions and operations (1) Squelch level (SQL) - MENU No.0 (2) Step frequency (STEP) - MENU No.1 (3) Output power (TXP) - MENU No.2 (4) Battery save (SAVE) - MENU No.3 (5) VOX Function (VOX) - MENU No.4 (6) Wide/Narrow bandwidth (WN) - MENU No.5 (7) Backlight (ABR) - MENU No. 6 (8) Dual Watch Operation (TDR) - MENU No. 7 (9) Keypad beep (BEEP) - MENU No. 8 (10) Time-Out-Timer (TOT) - MENU No.9 (11) Receiving DCS (R-DCS) - MENU No.10 (12) Receiving CTCSS (R-CTCSS) - MENU No.11 (13) Transmitting DCS - (T-DCS) - MENU No.12 (14) Transmitting CTCSS (T-CTCSS) - MENU No.13 (15) Voice function (VOICE) - MENU No. 14 (16) ANI-ID (ANI-ID) - MENU No.15 (17) DTMFST (DTMFST) - MENU No.16 (18) Signal code (S-CODE) - MENU No.17 (19) SCAN Resume Mode (SC-REV) - MENU No.18 (20) PTT-ID (PTT-ID) - MENU No.19 (21) PTT ID delay (PTT-LT) - MENU No.20 (22) Channel A Display Mode (MDF-A) - MENU No.21 (23) Channel B Display Mode (MDF-B) - MENU No.22 (24) Busy Channel Lock (BCL) - MENU No. 23 (25) Auto Keypad Lock (AUTOLK) - MENU No.24 (26) Frequency offset direction (SFT-D) - MENU No.25 (27) Frequency offset (OFFSET) - MENU No. 26 (28) Channel store - (MEM-CH) - MENU No. 27 (29) Channel Delete (DEL-CH) - MENU No.28 (30) Standby backlight (WT-LED) - MENU No.29 (31) RX backlight (RX-LED) - MENU No. 30 (32) TX backlight (TX-LED) - MENU No.31 (33) Alarm Mode (AL-MOD) - MENU No.32 (34) Dual Watch (TDR-AB) - Menu No.34 (35) Side tone elimination (STE) - Menu No. 35 (36) Side tone elimination in communication through repeater (RP-STE) - Menu No. 36 (37) Delay time of side tone elimination in communication through repeater (RPT-RL) - Menu No.37 (38) Display mode at the turning on (PONMSG) Menu No.38 (39) Roger beep (ROGER) - Menu No. 39 (40) Reset (RESET) - Menu No.40 (41) Repeater Tone (R-TONE) - Menu No.41 8. ON-LINE SERVICE AND SUPPORT Appendix A. – Trouble shooting guide Appendix B. - Technical Specifications Appendix D. - GMRS Frequency Chart (MHz) Appendix D. - Weather Channel Assignments Appendix C. - Shortcut Menu operations 1. GETTING STARTED 1.1 Regulations and Safety Warnings ATTENTION! To help you ward off bodily injury or property loss that may arise from improper operation, please read all the information carefully before using our products. This contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Verification of harmful interference by this equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBIITED UNDER FCC RULES AND FEDERRAL LAW. WARNING! Read this information before using the radio. In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both …

Text truncated - open the document above for the full version.

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED ADD: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] DECLARATION OF SIMILARITY Date: 2022-09-13 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED, hereby declare that the product: GMRS Two way radio, FCC ID: 2AJGM-UV9G. Model name: UV-9G, GMRS-9R, GM-56, GM-57WP, P52UV are electrically identical with the model name: UV-9G which was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows: They are the same product, UV-9G, GMRS-9R, GM-56, GM-57WP, P52UV are just different model name & appearance outside speaker, the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: __________________________ Printed Name: Peter Wang Title: Manager

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Agent Authorization Company: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong Product Name: GMRS Two way radio Model Number(s): UV-9G, GMRS-9R, GM-56, GM-57WP, P52UV Product Description: GMRS Two way radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-09-14 Name: Peter Wang Company: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED ADD: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-09-13 Subject; Request for Confidentiality FCC ID: 2AJGM-UV9G To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely ___________________ Contact person: Peter Wang

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED ADD: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] Date: 2022-09-13 Declaration Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 FCC ID: 2AJGM-UV9G Dear Sir/Madam, We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely Yours, Signature: ___________________________ Contact person: Peter Wang

Report No.: AGC02294220803AP02 Page 1 of 6 EXTERNAL PHOTOS SERIES MODEL(S): UV-9G and P52UV have the same appearance) Report No.: AGC02294220803AP02 Page 2 of 6 MAIN TEST MODEL TOP VIEW OF EUT Antenna Report No.: AGC02294220803AP02 Page 3 of 6 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC02294220803AP02 Page 4 of 6 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC02294220803AP02 Page 5 of 6 RIGHT VIEW OF EUT ADAPTER OF EUT ****************************************End of Report**************************************** Report No.: AGC02294220803AP02 Page 6 of 6

FCC ID Label Location 30MM&40MM FCC ID: 2AJGM-UV9G

Report No.: AGC02294220803AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC02294220803AP02 Page 2 of 4 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC02294220803AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC02294220803AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) ****************************************End of Report****************************************

Page 1 of 25 FCC Test Report Report No.: AGC02294220803FE08 FCC ID : 2AJGM-UV9G APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : GMRS Two way radio BRAND NAME : BAOFENG, POFUNG MODEL NAME : UV-9G, GMRS-9R, GM-56, GM-57WP, P52UV APPLICANT : PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED DATE OF ISSUE : Sep. 07, 2022 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02294220803FE08 Page 2 of 25 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 07, 2022 Valid Initial Release Report No.: AGC02294220803FE08 Page 3 of 25 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 3. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ............................................................... 6 4. SUPPORT EQUIPMENT LIST ......................................................................................................................... 7 5. SYSTEM DESCRIPTION .................................................................................................................................. 7 6. MEASUREMENT UNCERTAINTY ................................................................................................................... 8 7. SUMMARY OF TEST RESULTS ..................................................................................................................... 8 8. FCC RADIATED EMISSION TEST .................................................................................................................. 9 8.1 PROVISIONS APPLICABLE ................................................................................................................... 9 8.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................... 9 8.3 TEST PROCEDURE .............................................................................................................................. 11 8.4 TEST RESULT ....................................................................................................................................... 12 9. FCC CONDUCTED EMISSION TEST ............................................................................................................ 16 9.1 PROVISIONS APPLICABLE ................................................................................................................. 16 9.2 TEST SETUP BLOCK DIAGRAM ......................................................................................................... 16 9.4 TEST RESULT ................................................................................................................................... 18 10. ANTENNA CONDUCTED POWER FOR RECEIVERS ............................................................................... 20 10.1 PROVISIONS APPLICABLE ............................................................................................................... 20 10.2 TEST SETUP BLOCK DIAGRAM ....................................................................................................... 20 10.3 TEST PROCEDURE ............................................................................................................................ 20 10.4 TEST RESULT ..................................................................................................................................... 21 11. SCANNING RECEIVERS AND FREQUENCY CONVERTERS USED WITH SCANNING RECEIVERS .. 23 11.1 PROVISIONS APPLICABLE ............................................................................................................... 23 11.2 TEST SETUP BLOCK DIAGRAM ....................................................................................................... 23 11.3 TEST PROCEDURE ............................................................................................................................ 23 11.4 TEST RESULT ..................................................................................................................................... 24 APPENDIX I PHOTOGRAPHS OF TEST SETUP ............................................................................................. 25 APPENDIX II: PHOTOGRAPHS OF TEST EUT................................................................................................ 25 Report No.: AGC02294220803FE08 Page 4 of 25 1. VERIFICATION OF COMPLIANCE Applicant: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong Manufacturer: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong Factory: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong Product Designation GMRS Two way radio Brand Name BAOFENG, POFUNG Test Model UV-9G Series Model(s) GMRS-9R, GM-56, GM-57WP, P52UV Difference Description The same electromagnetic emissions and electromagnetic compatibility characteristics. UV-9G, GMRS-9R, GM-56, GM-57WP, P52UV are just different model name &Brand name & appearance outside speaker, the rest are the same. Measurement Procedure: ANSI C63.4: 2014 Deviation: No any deviation from the test method. Date of Test: Aug. 09, 2022~Sep. 06, 2022 Condition of Test Sample: Normal Test Result: Pass Report Template； AGCRT-US-PTT/EMC The above equipment was tested by Attestation Of Global Compliance (Shenzhen) Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure acc…

Text truncated - open the document above for the full version.

Report No.: AGC02294220803AP03 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC02294220803AP03 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP ****************************************End of Report*************************************