2AJGM-UVK5Amateur Radio

Amateur Radio BF-K5 SERIES USER‘S MANUAL PREFACE Thank you for purchasing this product. which is a dual band/dual display/dual watch. This easy-to-use radio will deliver you secure, instant and reliable communications at peak efficiency. Please read this manual carefully before use. The information presented herein will help you to derive maximum performance from your radio. WARNING！European Users should note that operation of this unit in Transmit mode requires the operator to have a valid Amateur Radio License from their respective Countries Amateur Radio Licensing Authority for the Frequencies and Transmitter Power levels that this Radio transmits on. Failure to comply may be unlawful and liable for prosecution. At this subject, refer to the “EU” specification guide 2014/53/EU. ATTENTION! When programming the radio, start by reading the factory software data, and then rewrite this data with your frequency etc., to a new saved code plug, otherwise errors may occur. You can use the programming cable with a PC to program the authorized frequency, bandwidth, power, etc. your programming must comply with your FCC (or EU other country) license certification. ATTENTION! Before using this product, read the RF Energy Exposure and Product Safety Guide that ship with the radio which contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation. PMR446, FRS, GMRS, MURS You may be tempted to use PMR446 (in Europe) or FRS, GMRS, MURS (in the USA) frequencies. Do note however that there are restrictions on these bands that make this transceiver illegal for use. Table of Contents Chapter1. Getting Started 5.2 Adjusting the volume 1.1 Regulations and Safety Warnings 5.3 Making a call 1.2 Main features 5.4 Channel selection 1.3 Content of the packaging 5.5 Frequency (VFO) mode Chapter2. Charging the Battery 5.6 Channel (MR) mode 2.1 Charging the Battery Pack Chapter6. Advanced Features 2.2 Charger Supplied 6.1 Frequency scanning 2.3 Use Caution with the Li-ion Battery 6.2 Channel scanning 2.4 How to Charge 6.3 CTCSS scanning 2.5 LED Indicator 6.4 DCS scanning 2.6 How to Store the Battery 6.5 Cursor▼▲Conversion (A/B) 2.7 Using the Type-C USB Charger 6.6 Keypad lock Chapter3. Installation of Accessories 6.7 1000Hz, 1450Hz, 1750Hz Tone-burst 3.1 Installing / Removing the Antenna 6.9 Manual Programming (Channels Memory) 3.2 Installing the belt clip 6.10 Repeaters Programming 3.3 Installing the battery pack 3.4 Additional Speaker/Microphone (Optional) Chapter7. Working the MENU System Chapter4. Radio Overview 7.1 Basic use 4.1 Buttons and controls of the radio 7.2 Using short-cuts 4.2 Main controls and parts of the radio 7.3 Functions and operations 4.3 Status Indications Appendix A. - Trouble shooting guide 4.4 Main keypad controls Appendix B. - Shortcut Menu operations Chapter5. Basic Operations Appendix C. - Technical Specifications 5.1 Power on the radio Chapter1. Getting Started 1.1 Regulations and Safety Warnings ■EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC (2014/53/EU). All applicable EU regulations are regarded (2006/66/EC, 2011/65/EU, 2012/19/EU). Please note that the above information is applicable to EU countries only. ■FCC Part15/IC Compliance FCC Part 15 Compliance Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. IC Compliance ■FCC & RSS RF Exposure WARNING! It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the following: Do not use the radio with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna. SAR tests are conducted using standard operating positions accepted by FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC/ISEDC that is does not exceed the exposure limit established by the FCC/ISEDC. Tests for each product are performed in positions and locations as required by the FCC/ISEDC. For body worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used …

Text truncated - open the document above for the full version.

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY ADD:Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] 202 3-07-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 74 35 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 FCC ID:2AJG M-UVK We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. 5 We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely, Signature: Typed or Printed Name: Title: Manager Peter Wang

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED ADD: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] Attestation Letter Date: 2023-07-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements for Amateur TX Frequencies FCC ID: 2AJGM-UVK5 PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED (“the applicant”) certifies that the equipment for transmitter frequencies can be programmed for only amateur frequencies (144-148MHz,420-450MHz) Also, equipment programming is the responsibility of Authorized Service Personnel, in that the Signature Printed Name: Peter Wang Title: Manager operator cannot directly program the transmit frequencies using the normally accessible Sincerely, external controls.

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2023-07-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2AJGM-UVK5 PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Peter Wang Title: Manager Company Name: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong

U.S. AGENT LETTER OF ATTESTATION Date: 2023-07-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AJGM-UVK5 PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED (“the Applicant”) certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong FRN: 0025809377 Tel: 00852-90831684 Email: [email protected] Signed by (printed name): Peter Wang Signature:

QA-FR-170-B PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED ADD: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] FCC Authorization Date: 2023-07-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Peter Wang Title: Manager

QA-FR-171-A PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED ADD: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong TEL: 00852-90831684 FAX: 00852-90831684 E-mail: [email protected] FCC Confidential Authorization Date: 2023-07-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AJGM-UVK5 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Peter Wang Title: Manager  Internal Photo  BOM  Tune up procedure

PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Add: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong Tel: 00852-90831684 Fax: 00852-90831684 Email: [email protected] DECLARATION OF SIMILARITY Date: 2023-07-11 To whom it may concern Dear Sir or Madam: We, PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED, hereby declare that the product: Amateur Radio, model: BF-K5Pro, AR-K5, RT-K5,TH-K5, CN-K5, GT-K5, RD-K5, UV-K5R, BF-K5R, UV-K5+, AR13F, AT999, THK5J, CF13B, A15, UVK5 are electrically identical with the model: BF-K5Plus which was tested by China Certification ICT Co., Ltd (Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between these models and that are declared similar are as follows: The detail information, please check the reports. Tested Model Series Model Difference BF-K5Plus BF-K5Pro, AR-K5, RT-K5, TH-K5, CN-K5, GT-K5, RD-K5, Model Name AT999, AR13F, A15, CF13B 1.Model Name 2. Color 3. Appearance outside speaker UV-K5+, THK5J, BF-K5R, UVK5, UV-K5R 1.Model Name 2. Appearance outside speaker Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Peter Wang Title: Manager

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP BF-K5Plus China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP EUT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP Port EUT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP Port Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-EXP

TEST REPORT Applicant: PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hon g Kong FCC ID: 2AJGM-UVK5 Product Name: Amateur Radio Standard(s): 47 CFR Part 15 Subpart B ANSI C63.4-2014 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230526870-00AM1 Date Of Issue: 2023/11/7 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00AM1 Page 2 of 138 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00AM1 Page 3 of 138 CONTENTS DOCUMENT REVISION HISTORY ............................................................................................................................ 4 1. GENERAL INFORMATION ..................................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ................................................................................ 5 1.2 DESCRIPTION OF TEST CONFIGURATION ................................................................................................................... 6 1.2.1 EUT Operation Condition: ............................................................................................................................... 6 1.2.2 Support Equipment List and Details ................................................................................................................ 6 1.2.3 Support Cable List and Details ......................................................................................................................... 6 1.2.4 Block Diagram of Test Setup ........................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY ................................................................................................................................ 9 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES ................................................................................................... 11 3.1 AC LINE CONDUCTED EMISSIONS .......................................................................................................................... 11 3.1.1 EUT Setup ...................................................................................................................................................... 11 3.1.2 EMI Test Receiver Setup ............................................................................................................................... 11 3.1.3 Test Procedure ................................................................................................................................................ 12 3.1.4 Corrected Amplitude & Margin Calculation ................................................................................................. 12 3.2 RADIATION SPURIOUS EMISSIONS .......................................................................................................................... 13 3.2.1 EUT Setup ...................................................................................................................................................... 13 3.2.2 Equipment Setup ............................................................................................................................................. 14 3.2.3 Test Procedure ................................................................................................................................................ 14 3.2.4 Corrected Amplitude & Margin Calculation ................................................................................................. 14 3.3 ANTENNA POWER CONDUCTION LIMITS FOR RECEIVERS ...................................................................................... 15 3.3.1 Applicable Standard ....................................................................................................................................... 15 Test Procedure ..............................................................................................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00A-TSP EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View M2,M3,M4 Conducted Emissions Side View M2,M3,M4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00A-TSP Conducted Emissions Front View M1 Conducted Emissions Side View M1 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00A-TSP Radiated Emission Below 1GHz Front View M2,M3,M4 Radiated Emission Below 1GHz Rear View M2,M3,M4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00A-TSP Radiated Emission Below 1GHz Front View M1 Radiated Emission Below 1GHz Rear View M1 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00A-TSP Radiated Emission Above 1GHz Front View M2,M3,M4 Radiated Emission Above 1GHz Rear View M2,M3,M4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526870-00A-TSP Radiated Emission Above 1GHz Front View M1 Radiated Emission Above 1GHz Rear View M1