2ALJJP40Mobile phone

12 12 Thank you for purchasing this innovative PCD device. The specifications in this document are subject to change without notice. To download the full user ́s manual visit us at: www.pcdlatam.com PCD and the PCD logo are registered trademarks of PCD,LLC. Other trademark are the property of their respective owners. Gracias por haber adquirido este producto de PCD. Las especificaciones en este manual están sujetas a cambios sin previo aviso. Lo invitamos a descargar el manual completo de usuario visitando nuestro sitio web: www.pcdlatam.com PCD y el logotipo de PCD son marcas registradas de PCD, LLC. El resto de las marcas comerciales son propiedad de sus respectivos dueños. TM POWERED BY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Specific Absorption Rate (SAR) information: This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: the mobile phone has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 10mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021/7/21 Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2ALJJP40 P40 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Mauricio Velasco / CTO LATAM Company: PCD, LLC Address: 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Phone: +1.631.495.7537 Fax: E-Mail: [email protected]

PCD, LLC 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2021/7/21 To whom it may concern: We, PCD, LLC the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ALJJP40 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Mauricio Velasco / CTO LATAM Company: PCD, LLC Address: 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Phone: +1.631.495.7537 Fax: E-Mail: [email protected]

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This reportshall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 4 EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This reportshall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 4 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This reportshall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 4 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This reportshall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 4 Fig.7

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 5 INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Bluetooth/ WIFI/GPS Antenna GSM/WCDMA /LTE Antenna LTE Diversity antenna Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 5 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 5 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 5 Fig.7 Fig.8 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 5 of 5 Fig.9 Fig.10

CALIBRATION DATA PROBE CALIBRATION DATA DIPOLE CALIBRATION DATA

SN 29/15 DIP 0G835-383; 835Head Calibrated impedance: 56.3Ω+0.8JΩ; Measurement impedance: 57.1Ω-5.0jΩ(within 5Ω) Calibrated return loss: -24.51dB; Measurement return loss: -22.89 dB(within 20%) SN 46/11 DIP 1G800-186; 1800Head Calibrated impedance: 46.7Ω+3.0JΩ; Measurement impedance: 48.5Ω+2.3jΩ(within 5Ω) Calibrated return loss: -26.66dB; Measurement return loss: -27.3 dB(within 20%) SN 46/11 DIP 1G900-187; 1900Head Calibrated impedance: 50.7Ω+4.1JΩ; Measurement impedance: 48.6Ω+2.9jΩ(within 5Ω) Calibrated return loss: -27.75dB; Measurement return loss: -28.54 dB(within 20%) SN 46/11 DIP 2G450-189; 2450Head Calibrated impedance: 49.8Ω+3.3JΩ; Measurement impedance: 50.9Ω-2.1jΩ(within 5Ω) Calibrated return loss: -29.54dB; Measurement return loss: -31.08 dB(within 20%)

Page 1 of 137 SAR Test Report Report No.: AGC10211210605FH01 FCC ID : 2ALJJP40 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Mobile phone BRAND NAME : PCD MODEL NAME : P40 APPLICANT : PCD, LLC DATE OF ISSUE : Jul. 19, 2021 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093:2013 IEEE Std C95.1 ™-2005 IEC 62209-1: 2016 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC10211210605FH01 Page 2 of 137 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 19, 2021 Valid Initial Release Report No.: AGC10211210605FH01 Page 3 of 137 Test Report Applicant Name PCD, LLC Applicant Address 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Manufacturer Name SHENZHEN HUAYUE WORLDCOM SOFTWARE TECHNOLOGY CO.,LTD Manufacturer Address Room 703-704, Building B, Phase 1, Wanke Yuncheng Innovation Valley, Xili Street, Nanshan District, Shenzhen Factory Name SHENZHEN HUAYUE WORLDCOM SOFTWARE TECHNOLOGY CO.,LTD Factory Address Room 703-704, Building B, Phase 1, Wanke Yuncheng Innovation Valley, Xili Street, Nanshan District, Shenzhen Product Designation Mobile phone Brand Name PCD Model Name P40 EUT Voltage DC3.7V by battery Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093:2013 IEEE Std C95.1 ™-2005 IEC 62209-1: 2016 Test Date Jul. 01, 2021 to Jul. 05, 2021 Report Template AGCRT-US-4G/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Jack Gui (Project Engineer) Jul. 05, 2021 Reviewed By Angela Li (Reviewer) Jul. 19, 2021 Approved By Forrest Lei (Authorized Officer) Jul. 19, 2021 Report No.: AGC10211210605FH01 Page 4 of 137 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 8 3.1. THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 8 3.2. COMOSAR E-FIELD PROBE .......................................................................................................................... 9 3.3. ROBOT .......................................................................................................................................................... 9 3.4. VIDEO POSITIONING SYSTEM ........................................................................................................................ 10 3.5. DEVICE HOLDER .......................................................................................................................................... 10 3.6. SAM TWIN PHANTOM ................................................................................................................................... 11 4. SAR MEASUREMENT PROCEDURE .............................................................................................................. 12 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 13 4.3. RF EXPOSURE CONDITIONS ......................................................................................................................... 15 5. TISSUE SIMULATING LIQUID ......................................................................................................................... 17 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 17 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 18 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 19 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 20 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 20 6.2. SAR SYSTEM CHECK ................................................................................................................................... 21 7. EUT TEST POSITION ...................................................................................................................................... 23 7.1. DEFINE TWO IMAGINARY LINES ON THE HANDSET ........................................................................................... 23 7.2. CHEEK POSITION ......................................................................................................................................... 24 7.3. TILT POSITION .............................................................................................................................................. 24 7.4. BODY WORN POSITION ................................................................................................................................ 25 8. SAR EXPOSURE LIMITS ............................................................................................................................... 26 9. TEST FACILITY .............................................................................................................................................. 27 10. TEST EQUIPMENT LIST ............…

Text truncated - open the document above for the full version.

Report No.: TZ210602336-E4 Page 1 of 94 FCC TEST REPORT Test report On Behalf of PCD, LLC For Mobile phone Model No.: P40 FCC ID: 2ALJJP40 Prepared for : PCD, LLC 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Prepared By : Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Date of Test: 2021/6/29 ~ 2021/7/12 Date of Report: 2021/7/13 Report Number: TZ210602336-E4 The test report apply only to the specific sample(s) tested under stated test conditions It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TZ210602336-E4 Page 2 of 94 TEST RESULT CERTIFICATION Applicant’s name ................. : PCD, LLC Address .................................. : 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Manufacture's Name ............ : SHENZHEN HUAYUE WORLDCOM SOFTWARE TECHNOLOGY CO.,LTD Address .................................. : Room 703-704, Building B, Phase 1, Wanke Yuncheng Innovation V alley, Xili Street, Nanshan District, Shenzhen,China Product description Trade Mark ................................ : PCD Product name ............................ : Mobile phone Model and/or type reference . : P40 Standards ............................. : FCC Rules and Regulations Part 22, Part 24 & Part 27 ANSI C63.26:2015 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ........................................... : Date (s) of performance of tests ............. : 2021/6/29 ~ 2021/7/12 Date of Issue .......................................... : 2021/7/13 Test Result .............................................. : Pass Testing Engineer : (Anna Hu) Technical Manager : (Hugo Chen) Authorized Signatory : (Andy Zhang) Report No.: TZ210602336-E4 Page 3 of 94 Revision History Revision Issue Date Revisions Revised By 000 2021/7/13 Initial Issue Andy Zhang Report No.: TZ210602336-E4 Page 4 of 94 Contents 1 TEST STANDARDS ........................................................................................................................................ 5 2 SUMMARY ...................................................................................................................................................... 6 2.1 PRODUCT DESCRIPTION .............................................................................................................................................. 6 2.2 HOST SYSTEM CONFIGURATION LIST AND DETAILS ...................................................................................................... 9 2.3 SHORT DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) ...................................................................................... 9 2.4 NORMAL ACCESSORY SETTING .................................................................................................................................... 9 2.5 EUT CONFIGURATION ................................................................................................................................................. 9 2.6 RELATED SUBMITTAL(S) / GRANT (S) ........................................................................................................................... 9 2.7 MODIFICATIONS .......................................................................................................................................................... 9 3 TEST ENVIRONMENT .................................................................................................................................. 10 3.1 TEST FACILITY .......................................................................................................................................................... 10 3.2 ENVIRONMENTAL CONDITIONS ................................................................................................................................... 10 3.3 TEST DESCRIPTION ................................................................................................................................................... 11 3.4 EQUIPMENT USED DURING THE TEST ......................................................................................................................... 12 3.5 MEASUREMENT UNCERTAINTY ................................................................................................................................... 13 4 DESCRIPTION OF TEST MODES ................................................................................................................ 14 5 TEST CONDITIONS AND RESULTS............................................................................................................ 14 5.1 OUTPUT POWER................................................................................................................................................... 14 5.1.1 CONDUCTED OUTPUT POWER ..................................................................................................................... 14 5.1.2 RADIATED OUTPUT POWER .......................................................................................................................... 20 5.2 PEAK-TO-AVERAGE RATIO ................................................................................................................................. 24 5.2.1 MEASUREMENT METHOD ............................................................................................................................ 24 5.2.2 PROVISIONS APPLICABLE .............................................................................................…

Text truncated - open the document above for the full version.

Report No.: TZ210602336-E5 Page 1 of 25 FCC TEST REPORT Test report On Behalf of PCD, LLC For Mobile phone Model No.: P40 FCC ID: 2ALJJP40 Prepared for : PCD, LLC 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Prepared By : Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Date of Test: 2021/6/29 ~ 2021/7/12 Date of Report: 2021/7/13 Report Number: TZ210602336-E5 The test report apply only to the specific sample(s) tested under stated test conditions It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TZ210602336-E5 Page 2 of 25 TEST RESULT CERTIFICATION Applicant’s name ................. : PCD, LLC Address .................................. : 1500 Tradeport Drive, Suite A, Orlando, Florida, United States Manufacture's Name ............ : SHENZHEN HUAYUE WORLDCOM SOFTWARE TECHNOLOGY CO.,LTD Address .................................. : Room 703-704, Building B, Phase 1, Wanke Yuncheng Innovation V alley, Xili Street, Nanshan District, Shenzhen,China Product description Trade Mark ................................ : PCD Product name ............................ : Mobile phone Model and/or type reference . : P40 Standards ............................. : FCC Rules and Regulations Part 22 & Part 24 & Part 27& Part 90 ANSI C63.26:2015 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Shenzhen Tongzhou Testing Co.,Ltd Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Shenzhen Tongzhou Testing Co.,Ltd Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : 2021/6/29 ~ 2021/7/12 Date of Issue ........................................... : 2021/7/13 Test Result .............................................. : Pass Testing Engineer : (Anna Hu) Technical Manager : (Hugo Chen) Authorized Signatory : (Andy Zhang) Report No.: TZ210602336-E5 Page 3 of 25 Revision History Revision Issue Date Revisions Revised By 000 2021/7/13 Initial Issue Andy Zhang Report No.: TZ210602336-E5 Page 4 of 25 Contents 1 TEST STANDARDS ......................................................................................................................................... 5 2 SUMMARY ........................................................................................................................................................ 6 2.1 Product Description ................................................................................................................................... 6 2.2 Host System Configuration List and Details .............................................................................................. 8 2.3 Short description of the Equipment under Test (EUT) .............................................................................. 8 2.5 Normal Accessory setting .......................................................................................................................... 8 2.6 EUT configuration ...................................................................................................................................... 8 2.7 Related Submittal(s) / Grant (s) ................................................................................................................. 8 2.8 Modifications ............................................................................................................................................. 8 3 TEST E N V IRONMENT .............................................................................................................................. 9 3.1 Test Facility ............................................................................................................................................... 9 3.2 Environmental conditions .......................................................................................................................... 9 3.3 Test Description......................................................................................................................................... 9 3.4 Equipments Used during the Test ........................................................................................................... 11 3.5 Measurement uncertainty ........................................................................................................................ 12 4 TEST CON D ITIONS AND RESULTS .................................................................................................... 13 4.1 Conducted Output Power / E.I.R.P / E.R.P / Peak-to-Average Ratio (PAR) .......................................... 13 4.2 Occupied Bandwidth and Emission Bandwidth ....................................................................................... 15 4.3 Band Edge compliance ........................................................................................................................... 16 4.4 Spurious Emssion on Antenna Port ........................................................................................................ 17 4.5 Radiated Spurious Emssion .................................................................................................................... 18 4.6 Frequency Stability under Temperature & Voltage Variations ................................................................ 23 5 Tes t Se t up Photo s of the E UT ............................................................................................................... 25 6 E x t e r nal Photos of the EUT ........................................................................…

Text truncated - open the document above for the full version.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 1 of 166 RF Test Data for LTE (Conducted Measurement) Product Name: Mobile phone Trade Mark: PCD Test Model: P40 Sample ID: TZ210602336-1# FCC ID: 2ALJJP40 Environmental Conditions Temperature: 23.8°C Relative Humidity: 56% ATM Pressure: 100.0 kPa Test Engineer: Anna Hu Supervised by: Hugo Chen Remark: For LTE Band2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 2 of 166 Band Edge and Emission Mask Band Bandwidth(MHz) UL Frequency(MHz) Modulation RB Size RB Offset Conclusion Band2 1.4 1850.7 QPSK 6 LOW Pass Band2 1.4 1850.7 QPSK 1 LOW Pass Band2 1.4 1850.7 16QAM 6 LOW Pass Band2 1.4 1850.7 16QAM 1 LOW Pass Band2 1.4 1909.3 QPSK 6 LOW Pass Band2 1.4 1909.3 QPSK 1 HIGH Pass Band2 1.4 1909.3 16QAM 6 LOW Pass Band2 1.4 1909.3 16QAM 1 HIGH Pass Band2 3 1851.5 QPSK 15 LOW Pass Band2 3 1851.5 QPSK 1 LOW Pass Band2 3 1851.5 16QAM 15 LOW Pass Band2 3 1851.5 16QAM 1 LOW Pass Band2 3 1908.5 QPSK 15 LOW Pass Band2 3 1908.5 QPSK 1 HIGH Pass Band2 3 1908.5 16QAM 15 LOW Pass Band2 3 1908.5 16QAM 1 HIGH Pass Band2 5 1852.5 QPSK 25 LOW Pass Band2 5 1852.5 QPSK 1 LOW Pass Band2 5 1852.5 16QAM 25 LOW Pass Band2 5 1852.5 16QAM 1 LOW Pass Band2 5 1907.5 QPSK 25 LOW Pass Band2 5 1907.5 QPSK 1 HIGH Pass Band2 5 1907.5 16QAM 25 LOW Pass Band2 5 1907.5 16QAM 1 HIGH Pass Band2 10 1855 QPSK 50 LOW Pass Band2 10 1855 QPSK 1 LOW Pass Band2 10 1855 16QAM 50 LOW Pass Band2 10 1855 16QAM 1 LOW Pass Band2 10 1905 QPSK 50 LOW Pass Band2 10 1905 QPSK 1 HIGH Pass Band2 10 1905 16QAM 50 LOW Pass Band2 10 1905 16QAM 1 HIGH Pass Band2 15 1857.5 QPSK 75 LOW Pass Band2 15 1857.5 QPSK 1 LOW Pass Band2 15 1857.5 16QAM 75 LOW Pass Band2 15 1857.5 16QAM 1 LOW Pass Band2 15 1902.5 QPSK 75 LOW Pass Band2 15 1902.5 QPSK 1 HIGH Pass Band2 15 1902.5 16QAM 75 LOW Pass Band2 15 1902.5 16QAM 1 HIGH Pass Band2 20 1860 QPSK 100 LOW Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 3 of 166 Band2 20 1860 QPSK 1 LOW Pass Band2 20 1860 16QAM 100 LOW Pass Band2 20 1860 16QAM 1 LOW Pass Band2 20 1900 QPSK 100 LOW Pass Band2 20 1900 QPSK 1 HIGH Pass Band2 20 1900 16QAM 100 LOW Pass Band2 20 1900 16QAM 1 HIGH Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 4 of 166 Band2-1.4-1850.7-QPSK-6#LOW@Pass Band2-1.4-1850.7-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 5 of 166 Band2-1.4-1850.7-16QAM-6#LOW@Pass Band2-1.4-1850.7-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 6 of 166 Band2-1.4-1909.3-QPSK-6#LOW@Pass Band2-1.4-1909.3-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 7 of 166 Band2-1.4-1909.3-16QAM-6#LOW@Pass Band2-1.4-1909.3-16QAM-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 8 of 166 Band2-3-1851.5-QPSK-15#LOW@Pass Band2-3-1851.5-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 9 of 166 Band2-3-1851.5-16QAM-15#LOW@Pass Band2-3-1851.5-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 10 of 166 Band2-3-1908.5-QPSK-15#LOW@Pass Band2-3-1908.5-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2ALJJP40 Report No.: TZ210602336-E5 Page 11 of 166 Band2-3-1908.5-16QAM-15#LOW@Pass Band2-3-1…

Text truncated - open the document above for the full version.