2ANMU-C37Smart phone

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Signed by (Printed Name/Title): Date: Feb 20, 2024 Kenneth Young/ Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Grantee Code: 2ANMU Contact Name: Gaolei Yan Street Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA City/Province/Zip: SHENZHEN,China Telephone No: 0755-61156588 Email: [email protected] FCC ID2ANMU-C37 FRN0026810242 Applicant Signature: Date:2024.2.20 Signed by (Printed Name/Title): Gaolei Yan/ Manager

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) (March 26, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2ANMU-C37) [SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Gaolei Yan (SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) (March 26, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2ANMU-C37) [SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Gaolei Yan

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Model Difference Data：March 26, 2024 Product description: Smart phone Model name: C37, C37 S, C37 Pro, C37 Ultra Trade Name: OUKITEL FCC ID: 2ANMU-C37 All the model are the same circuit and RF module, except model names . Regards Sincerely Client’s signature : Client’s name / title : Gaolei Yan（Manager） Contact information / address： A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZON E, GUANLAN, LONGHUA, SHENZHEN, 518XXX China

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD (2024.03.26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Smart phone / C37, C37 S, C37 Pro, C37 Ultra / FCC ID: 2ANMU-C37) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☒ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Gaolei Yan Title: Manager

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD (2024.03.26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Gaolei Yan Title: Manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 5 Model: C37 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 5

FCC ID LABEL: Label Location:

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 128 TEST REPORT Compiled by: Reviewed by: Approved by: Zhang Mao cheng Martin Feng Rita Xiao / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Smart phone FCC ID: 2ANMU-C37 Trademark: OUKITEL Model Number: C37, C37 S, C37 Pro, C37 Ultra Prepared For: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA, SHENZHEN, 518XXX China Manufacturer: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA, SHENZHEN, 518XXX China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Dec. 05, 2023 Sample tested Date: Dec. 05, 2023 to Mar. 05, 2024 Issue Date: Mar. 05, 2024 Report No.: CTB231215007RHX Test Standards FCC 47 CFR Part2(2.1093), FCC 47 CFR Part1(1.1310) FCC 47 CFR Part1(1.1307), ANSI/IEEE C95.1-2019 IEEE 1528-2013 & Published RF Exposure KDB Procedures Test Results PASS Remark: This is SAR test report. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 128 Contents Page 1 COVER PAGE ......................................................................................................................................... 1 1. VERSION .................................................................................................................................................................. 4 2. PRODUCT INFORMATION AND TEST SETUP............................................................................................... 5 2.1 PRODUCT INFORMATION ................................................................................................................................... 5 3 EQUIPMENT USED DURING TEST ................................................................................................................... 7 3.1 EQUIPMENT LIST ............................................................................................................................................... 7 3.2 TEST EQUIPMENT CALIBRATION ....................................................................................................................... 8 4 SAR INTRODUCTION ........................................................................................................................................... 9 4.1 INTRODUCTION .................................................................................................................................................. 9 4.2 SAR DEFINITION ............................................................................................................................................... 9 5 SAR MEASUREMENT SETUP ........................................................................................................................... 10 5.1 SAR MEASUREMENT SETUP .................................................................................................................... 10 5.2 DASY5 E-FIELD PROBE SYSTEM .................................................................................................................... 11 5.3 PROBE SPECIFICATION ..................................................................................................................................... 11 5.4 ISOTROPIC E-FIELD PROBE .............................................................................................................................. 11 5.5 PHANTOMS ...................................................................................................................................................... 12 5.6 DEVICE HOLDER .............................................................................................................................................. 12 6 SAR TEST PROCEDURE .................................................................................................................................... 14 6.1 SCANNING PROCEDURE ................................................................................................................................... 14 6.2 EXTRAPOLATION ............................................................................................................................................. 17 6.3 EAR REFERENCE POINT ................................................................................................................................... 17 6.4 DEVICE REFERENCE POINTS ............................................................................................................................ 17 6.5 TEST CONFIGURATION – POSITIONING FOR CHEEK / TOUCH ........................................................................... 17 6.6 TEST CONFIGURATION – POSITIONING FOR EAR / 15° TILT ............................................................................. 19 6.7 TEST POSITION – BODY CONFIGURATIONS ...................................................................................................... 19 7 EXPOSURE LIMIT ............................................................................................................................................... 20 7.1 UNCONTROLLED ENVIRONMENT ........................................…

Text truncated - open the document above for the full version.

Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates S Schweizerischer Kalibrierdienst C s Service suisse d'etalonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation No.: SCS 0108 Client CTB Certificate No: D750V3-1088 CALIBRATION CERTIFICATE Object D750V3 - SN:1088 Calibration procedure(s) QA CAL-05.v11 Calibration Procedure for SAR Validation Sources between 0.7-3 GHz Calibration date: September 19, 2022 - . This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22土3) ° C and humidity < 70%. Calibration Equipment used (M& TE critical for calibration) Primary Standards ID# Cal Date (Cert什icateNo.) Scheduled Calibration Power meter NAP SN: 104778 Apr-23 Power sensor NRP-291 SN: 103244 Apr-23 Power sensor NRP-Z91 SN: 103245 Apr-23 Reference 20 dB Attenuator SN: BH9394 (20k) Apr-23 Type-N mismatch combination SN: 310982 / 06327 Apr-23 Reference Probe EX3DV4 SN: 7349 Dec-22 DAE4 SN: 601 Dec-22 Secondary Standards ID# 01-Apr-22 (No. 217-03100/03101) 01-Apr-22 (No. 217-03100) 01-Apr-22(No. 217-03101) 31-Mar-22 (No. 217-03106) 31 -Mar-22 (No. 217-03104) 31-Dec-21 (No. EX3-7349_Dec19) 27- Dec-21(No. DAE4-601_Dec19) Check Date (in house) Scheduled Check Power meter E4419B SN: 8839512475 Power sensor HP 8481A SN: US37292783 Power sensor HP 8481A SN: MY41092317 RF generator R&S SMT-06 SN. 100972 Network Analyzer Agilent E8358A _ SN: US41080477 30-0ct-16 (in house check Feb-21) 07-0ct-17 (in house check Oct-20) 07-0ct-17 (in house check Oct-20) 15-Jun-17 (in house check Oct-20) 31-Mar-15 (in house check Oct-20) In house check: Oct-22 In house c heck. Oct-22 In house check: Oct-22 In house check. Oct-22 In house check: Oct-22 Name Function /己 Calibrated by: Jeffrey Katzman Laboratory Technician Approved by: Katja Pokovic Technical Manager /亥 乡 多 Issued: September 27, 2022 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D750V3-1088 Page 1 of 6 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL ConvF N/A tissue simulating liquid sensitivity in TSL / NORM x,y,z not applicable or not measured Calibration is Performed According to the Following Standards: S Schweizerischer Kalibrierdienst C s Service suisse d'etalonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation No.: SCS 0108 a)IEC/IEEE 62209-1528, "Measurement Procedure for The Assessment of Specific Absorption Rate of Human Exposure to Radio Frequency Fields from Hand-held and Body-mounted Wireless Communication Devices- Part 1528: Human Models, Instrumentation and Procedures (Frequency range of 4 MHz to 10 GHz)", October 2020 b)KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: c) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: • Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. • Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. • Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. • Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required. • SAR measured: SAR measured at the stated antenna input power. • SAR normalized: SAR as measured, normalized to an input power of 1 Wat the antenna connector. • SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: 0750V3-1088 Page 2 of 6 Measurement Conditions DASY svste c 1ven on paqe 1 . DASY Version DASY5 V52.10.4 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center - TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 750 MHz士1MHz f ot · Head TSL parameters T Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 ° C 41.9 0.89 mho/m Measured Head TSL parameters (22.0士0.2) ° C 42.4土6% 0.90 mho/m士6% Head TSL temperature change during test < 0.5 ° C -------- SAR result with Head TSL SAR averaged over 1 cm 3 (1 g) of Head TSL SAR measured SAR for nominal Head TSL parameters Condition ，一，． ． 250 mW input power normalized to 1 W 2.14W/kg 8.51 W/kg士17.0 % (k=2) SAR averaged over 10 cm 3 (10 g) of Head TSL SAR measured SAR for nominal Head TSL parameters condition 250 mW input power normalized to 1 W 1.39 W/kg 5.53 W/kg :t 16.5 % (k=2) Certificate No: D750V3-1088 Page 3 of 6 Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to fee…

Text truncated - open the document above for the full version.

Report 1 Conducted output power Band Bandwidth (MHz) UL Channel RB Size RB Position Modulation Power (dBm) high Limit (dBm) Verdict Band12 1.4 23017 1 #0 QPSK 23.35 37 PASS Band12 1.4 23017 1 #Mid QPSK 23.60 37 PASS Band12 1.4 23017 1 #Max QPSK 23.36 37 PASS Band12 1.4 23017 3 #0 QPSK 23.36 37 PASS Band12 1.4 23017 3 #Max QPSK 23.38 37 PASS Band12 1.4 23017 6 #0 QPSK 22.34 37 PASS Band12 1.4 23017 1 #0 QAM16 22.34 37 PASS Band12 1.4 23017 1 #Mid QAM16 22.57 37 PASS Band12 1.4 23017 1 #Max QAM16 22.35 37 PASS Band12 1.4 23017 3 #0 QAM16 22.51 37 PASS Band12 1.4 23017 3 #Max QAM16 22.57 37 PASS Band12 1.4 23017 6 #0 QAM16 21.36 37 PASS Band12 1.4 23095 1 #0 QPSK 23.31 37 PASS Band12 1.4 23095 1 #Mid QPSK 23.52 37 PASS Band12 1.4 23095 1 #Max QPSK 23.29 37 PASS Band12 1.4 23095 3 #0 QPSK 23.41 37 PASS Band12 1.4 23095 3 #Max QPSK 23.38 37 PASS Band12 1.4 23095 6 #0 QPSK 22.43 37 PASS Band12 1.4 23095 1 #0 QAM16 22.49 37 PASS Band12 1.4 23095 1 #Mid QAM16 22.63 37 PASS Band12 1.4 23095 1 #Max QAM16 22.50 37 PASS Band12 1.4 23095 3 #0 QAM16 22.42 37 PASS Band12 1.4 23095 3 #Max QAM16 22.43 37 PASS Band12 1.4 23095 6 #0 QAM16 21.38 37 PASS Band12 1.4 23173 1 #0 QPSK 23.51 37 PASS Band12 1.4 23173 1 #Mid QPSK 23.75 37 PASS Band12 1.4 23173 1 #Max QPSK 23.57 37 PASS Band12 1.4 23173 3 #0 QPSK 23.61 37 PASS Band12 1.4 23173 3 #Max QPSK 23.58 37 PASS Band12 1.4 23173 6 #0 QPSK 22.60 37 PASS Band12 1.4 23173 1 #0 QAM16 22.41 37 PASS Band12 1.4 23173 1 #Mid QAM16 22.60 37 PASS Band12 1.4 23173 1 #Max QAM16 22.43 37 PASS Band12 1.4 23173 3 #0 QAM16 22.53 37 PASS Band12 1.4 23173 3 #Max QAM16 22.55 37 PASS Band12 1.4 23173 6 #0 QAM16 21.55 37 PASS Band12 3 23025 1 #0 QPSK 23.25 37 PASS Band12 3 23025 1 #Mid QPSK 23.23 37 PASS Band12 3 23025 1 #Max QPSK 23.18 37 PASS Band12 3 23025 8 #0 QPSK 22.29 37 PASS Band12 3 23025 8 #Max QPSK 22.31 37 PASS Report Band12 3 23025 15 #0 QPSK 22.30 37 PASS Band12 3 23025 1 #0 QAM16 22.58 37 PASS Band12 3 23025 1 #Mid QAM16 22.59 37 PASS Band12 3 23025 1 #Max QAM16 22.54 37 PASS Band12 3 23025 8 #0 QAM16 21.32 37 PASS Band12 3 23025 8 #Max QAM16 21.33 37 PASS Band12 3 23025 15 #0 QAM16 21.28 37 PASS Band12 3 23095 1 #0 QPSK 23.30 37 PASS Band12 3 23095 1 #Mid QPSK 23.30 37 PASS Band12 3 23095 1 #Max QPSK 23.33 37 PASS Band12 3 23095 8 #0 QPSK 22.33 37 PASS Band12 3 23095 8 #Max QPSK 22.40 37 PASS Band12 3 23095 15 #0 QPSK 22.35 37 PASS Band12 3 23095 1 #0 QAM16 22.50 37 PASS Band12 3 23095 1 #Mid QAM16 22.48 37 PASS Band12 3 23095 1 #Max QAM16 22.45 37 PASS Band12 3 23095 8 #0 QAM16 21.33 37 PASS Band12 3 23095 8 #Max QAM16 21.39 37 PASS Band12 3 23095 15 #0 QAM16 21.25 37 PASS Band12 3 23165 1 #0 QPSK 23.51 37 PASS Band12 3 23165 1 #Mid QPSK 23.53 37 PASS Band12 3 23165 1 #Max QPSK 23.60 37 PASS Band12 3 23165 8 #0 QPSK 22.51 37 PASS Band12 3 23165 8 #Max QPSK 22.57 37 PASS Band12 3 23165 15 #0 QPSK 22.48 37 PASS Band12 3 23165 1 #0 QAM16 22.36 37 PASS Band12 3 23165 1 #Mid QAM16 22.42 37 PASS Band12 3 23165 1 #Max QAM16 22.43 37 PASS Band12 3 23165 8 #0 QAM16 21.50 37 PASS Band12 3 23165 8 #Max QAM16 21.58 37 PASS Band12 3 23165 15 #0 QAM16 21.51 37 PASS Band12 5 23035 1 #0 QPSK 23.12 37 PASS Band12 5 23035 1 #Mid QPSK 23.25 37 PASS Band12 5 23035 1 #Max QPSK 23.16 37 PASS Band12 5 23035 12 #0 QPSK 22.33 37 PASS Band12 5 23035 12 #Max QPSK 22.31 37 PASS Band12 5 23035 25 #0 QPSK 22.33 37 PASS Band12 5 23035 1 #0 QAM16 22.44 37 PASS Band12 5 23035 1 #Mid QAM16 22.56 37 PASS Band12 5 23035 1 #Max QAM16 22.51 37 PASS Band12 5 23035 12 #0 QAM16 21.36 37 PASS Band12 5 23035 12 #Max QAM16 21.36 37 PASS Band12 5 23035 25 #0 QAM16 21.35 37 PASS Band12 5 23095 1 #0 QPSK 23.19 37 PASS Report Band12 5 23095 1 #Mid QPSK 23.34 37 PASS Band12 5 23095 1 #Max QPSK 23.25 37 PASS Band12 5 23095 12 #0 QPSK 22.30 37 PASS Band12 5 23095 12 #Max QPSK 22.36 37 PASS Band12 5 23095 25 #0 QPSK 22.37 37 PASS Band12 5 23095 1 #0 QAM16 22.48 37 PASS Band12 5 23095 1 #Mid QAM16 22.66 37 PASS Band12 5 23095 1 #Max QAM16 22.57 37 PASS Band12 5 23095 12 #0 QAM16 21.24 37 PASS Band12 5 23095 12 #Max QAM16 21.39 37 PASS Band12 5 23095 25 #0 QAM16 21.41 37 PASS Band12 5 23155 1 #0 QPSK 23.31 37 PASS Band12 5 23155 1 #Mid QPSK 23.50 37 PASS Band12 5 23155 1 #Max QPSK 23.45 37 PASS Band12 5 23155 12 #0 QPSK 22.56 37 PASS Band12 5 23155 12 #Max QPSK 22.50 37 PASS Band12 5 23155 25 #0 QPSK 22.53 37 PASS Band12 5 23155 1 #0 QAM16 22.54 37 PASS Band12 5 23155 1 #Mid QAM16 22.71 37 PASS Band12 5 23155 1 #Max QAM16 22.63 37 PASS Band12 5 23155 12 #0 QAM16 21.49 37 PASS Band12 5 23155 12 #Max QAM16 21.41 37 PASS Band12 5 23155 25 #0 QAM16 21.52 37 PASS Band12 10 23060 1 #0 QPSK 23.21 37 PASS Band12 10 23060 1 #Mid QPSK 23.45 37 PASS Band12 10 23060 1 #Max QPSK 23.30 37 PASS Band12 10 23060 25 #0 QPSK 22.39 37 PASS Band12 10 23060 25 #Max QPSK 22.54 37 PASS Band12 10 23060 50 #0 QPSK 22.48 37 PASS Band12 10 23060 1 #0 QAM16 22.51 37 PASS Band12 10 23060 1 #Mid QAM16 22.74 37 PASS Band12 10 23060 1 #Max QAM16 22.60 37 PASS Band12 10 23060 25 #0 QAM16 21.45 37 PASS Band12 10 23060 25 #Max QAM16 21.60 37 PASS Band12 10 23060 50 #0 QAM16 21.47 37 PASS Band12 10 23095 1 #0 QPSK 23.26 37 PASS Band12 10 23095 1 #Mid QPSK 23.46 37 PASS Band12 10 23095 1 #Max QPSK 23.43 37 PASS Band12 10 23095 25 #0 QPSK 22.29 37 PASS Band12 10 23095 25 #Max QPSK 22.53 37 PASS Band12 10 23095 50 #0 QPSK 22.42 37 PASS Band12 10 23095 1 #0 QAM16 22.41 37 PASS Band12 10 23095 1 #Mid QAM16 22.69 37 PASS Band12 10 23095 1 #Max QAM16 22.62 37 PASS Report Band12 10 23095 25 #0 QAM16 21.32 37 PASS Band12 10 23095 25 #Max QAM16 21.55 37 PASS Band12 10 23095 50 #0 QAM16 21.39 37 PASS Band12 10 23130 1 #0 QPSK 23.37 37 PASS Band12 10 23130 1 #Mid QPSK 23.67 37 PASS Band12 10 23130 1 #Max QPSK 23.52 37 PASS Band12 10 23130 25 #0 QPSK 22.40 37 PASS Band12 10 23130 25 #Max QPSK 22.48 37 PASS Band12 10 23130 50 #0 QPSK 22.43 37 PASS Band12 10 23130 1 #0 QAM16 22.20 37 PASS Band12 10 23130 1 #Mid QAM16 22.48 37 PASS Band12 10 23130 1 #Max QAM16 22.42 3…

Text truncated - open the document above for the full version.

Report Band17 QPSK BW=10MHz Channel=23790 RB Size=50 Position=#0 Band17 QAM16 BW=10MHz Channel=23790 RB Size=50 Position=#0 Report Band2 QPSK BW=1.4MHz Channel=18900 RB Size=6 Position=#0 Band2 QAM16 BW=1.4MHz Channel=18900 RB Size=6 Position=#0 Report Band2 QPSK BW=3MHz Channel=18900 RB Size=15 Position=#0 Band2 QAM16 BW=3MHz Channel=18900 RB Size=15 Position=#0 Report Band2 QPSK BW=5MHz Channel=18900 RB Size=25 Position=#0 Band2 QAM16 BW=5MHz Channel=18900 RB Size=25 Position=#0 Report Band2 QPSK BW=10MHz Channel=18900 RB Size=50 Position=#0 Band2 QAM16 BW=10MHz Channel=18900 RB Size=50 Position=#0 Report Band2 QPSK BW=15MHz Channel=18900 RB Size=75 Position=#0 Band2 QAM16 BW=15MHz Channel=18900 RB Size=75 Position=#0 Report Band2 QPSK BW=20MHz Channel=18900 RB Size=100 Position=#0 Band2 QAM16 BW=20MHz Channel=18900 RB Size=100 Position=#0 Report Band4 QPSK BW=1.4MHz Channel=20175 RB Size=6 Position=#0 Band4 QAM16 BW=1.4MHz Channel=20175 RB Size=6 Position=#0 Report Band4 QPSK BW=3MHz Channel=20175 RB Size=15 Position=#0 Band4 QAM16 BW=3MHz Channel=20175 RB Size=15 Position=#0 Report Band4 QPSK BW=5MHz Channel=20175 RB Size=25 Position=#0 Band4 QAM16 BW=5MHz Channel=20175 RB Size=25 Position=#0 Report Band4 QPSK BW=10MHz Channel=20175 RB Size=50 Position=#0 Band4 QAM16 BW=10MHz Channel=20175 RB Size=50 Position=#0 Report Band4 QPSK BW=15MHz Channel=20175 RB Size=75 Position=#0 Band4 QAM16 BW=15MHz Channel=20175 RB Size=75 Position=#0 Report Band4 QPSK BW=20MHz Channel=20175 RB Size=100 Position=#0 Band4 QAM16 BW=20MHz Channel=20175 RB Size=100 Position=#0 Report Band5 QPSK BW=1.4MHz Channel=20525 RB Size=6 Position=#0 Band5 QAM16 BW=1.4MHz Channel=20525 RB Size=6 Position=#0 Report Band5 QPSK BW=3MHz Channel=20525 RB Size=15 Position=#0 Band5 QAM16 BW=3MHz Channel=20525 RB Size=15 Position=#0 Report Band5 QPSK BW=5MHz Channel=20525 RB Size=25 Position=#0 Band5 QAM16 BW=5MHz Channel=20525 RB Size=25 Position=#0 Report Band5 QPSK BW=10MHz Channel=20525 RB Size=50 Position=#0 Band5 QAM16 BW=10MHz Channel=20525 RB Size=50 Position=#0 Report Band7 QPSK BW=5MHz Channel=21100 RB Size=25 Position=#0 Band7 QAM16 BW=5MHz Channel=21100 RB Size=25 Position=#0 Report Band7 QPSK BW=10MHz Channel=21100 RB Size=50 Position=#0 Band7 QAM16 BW=10MHz Channel=21100 RB Size=50 Position=#0 Report Band7 QPSK BW=15MHz Channel=21100 RB Size=75 Position=#0 Band7 QAM16 BW=15MHz Channel=21100 RB Size=75 Position=#0 Report Band7 QPSK BW=20MHz Channel=21100 RB Size=100 Position=#0 Band7 QAM16 BW=20MHz Channel=21100 RB Size=100 Position=#0 Report 5 Band edge Band Bandwidth (MHz) UL Channel RB Size RB Position Modulation Spur Freq (MHz) Spur Level (dBm) Limit (dBm) Verdict Band12 1.4 23017 6 #0 QPSK 699.00 -27.91 -13 PASS Band12 1.4 23017 6 #0 QAM16 699.00 -29.35 -13 PASS Band12 1.4 23173 6 #0 QPSK 716.00 -27.83 -13 PASS Band12 1.4 23173 6 #0 QAM16 716.26 -30.39 -13 PASS Band12 3 23025 15 #0 QPSK 699.00 -33.18 -13 PASS Band12 3 23025 15 #0 QAM16 699.00 -33.83 -13 PASS Band12 3 23165 15 #0 QPSK 716.00 -32.75 -13 PASS Band12 3 23165 15 #0 QAM16 716.11 -34.12 -13 PASS Band12 5 23035 25 #0 QPSK 699.00 -27.03 -13 PASS Band12 5 23035 25 #0 QAM16 699.00 -28.52 -13 PASS Band12 5 23155 25 #0 QPSK 716.02 -26.91 -13 PASS Band12 5 23155 25 #0 QAM16 716.11 -27.68 -13 PASS Band12 10 23060 50 #0 QPSK 698.83 -31.41 -13 PASS Band12 10 23060 50 #0 QAM16 698.90 -34.52 -13 PASS Band12 10 23130 50 #0 QPSK 716.22 -35.37 -13 PASS Band12 10 23130 50 #0 QAM16 716.11 -34.64 -13 PASS Band17 5 23755 25 #0 QPSK 704.00 -25.73 -13 PASS Band17 5 23755 25 #0 QAM16 703.97 -27.31 -13 PASS Band17 5 23825 25 #0 QPSK 716.00 -25.80 -13 PASS Band17 5 23825 25 #0 QAM16 716.01 -28.32 -13 PASS Report Band17 10 23780 50 #0 QPSK 703.92 -32.59 -13 PASS Band17 10 23780 50 #0 QAM16 704.00 -32.54 -13 PASS Band17 10 23800 50 #0 QPSK 716.00 -30.35 -13 PASS Band17 10 23800 50 #0 QAM16 716.04 -30.97 -13 PASS Band2 1.4 18607 6 #0 QPSK 1850.00 -27.22 -13 PASS Band2 1.4 18607 6 #0 QAM16 1849.99 -27.33 -13 PASS Band2 1.4 19193 6 #0 QPSK 1910.00 -23.69 -13 PASS Band2 1.4 19193 6 #0 QAM16 1910.00 -25.57 -13 PASS Band2 3 18615 15 #0 QPSK 1850.00 -28.53 -13 PASS Band2 3 18615 15 #0 QAM16 1849.98 -30.66 -13 PASS Band2 3 19185 15 #0 QPSK 1910.00 -26.13 -13 PASS Band2 3 19185 15 #0 QAM16 1910.00 -26.59 -13 PASS Band2 5 18625 25 #0 QPSK 1850.00 -21.11 -13 PASS Band2 5 18625 25 #0 QAM16 1849.98 -20.37 -13 PASS Band2 5 19175 25 #0 QPSK 1910.02 -19.36 -13 PASS Band2 5 19175 25 #0 QAM16 1910.02 -18.80 -13 PASS Band2 10 18650 50 #0 QPSK 1849.98 -23.68 -13 PASS Band2 10 18650 50 #0 QAM16 1849.86 -25.71 -13 PASS Band2 10 19150 50 #0 QPSK 1910.06 -22.39 -13 PASS Band2 10 19150 50 #0 QAM16 1910.00 -24.67 -13 PASS Band2 15 18675 75 #0 QPSK 1849.97 -23.63 -13 PASS Band2 15 18675 75 #0 QAM16 1849.97 -26.32 -13 PASS Band2 15 19125 75 #0 QPSK 1910.15 -23.21 -13 PASS Band2 15 19125 75 #0 QAM16 1910.00 -24.06 -13 PASS Band2 20 18700 100 #0 QPSK 1850.00 -26.06 -13 PASS Band2 20 18700 100 #0 QAM16 1850.00 -26.84 -13 PASS Band2 20 19100 100 #0 QPSK 1910.00 -24.65 -13 PASS Band2 20 19100 100 #0 QAM16 1910.08 -26.64 -13 PASS Band4 1.4 19957 6 #0 QPSK 1710.00 -29.33 -13 PASS Band4 1.4 19957 6 #0 QAM16 1710.00 -30.05 -13 PASS Band4 1.4 20393 6 #0 QPSK 1755.00 -30.87 -13 PASS Band4 1.4 20393 6 #0 QAM16 1755.00 -31.25 -13 PASS Band4 3 19965 15 #0 QPSK 1710.00 -30.64 -13 PASS Band4 3 19965 15 #0 QAM16 1710.00 -31.62 -13 PASS Band4 3 20385 15 #0 QPSK 1755.00 -32.14 -13 PASS Band4 3 20385 15 #0 QAM16 1755.01 -31.79 -13 PASS Band4 5 19975 25 #0 QPSK 1709.98 -24.43 -13 PASS Band4 5 19975 25 #0 QAM16 1710.00 -27.21 -13 PASS Band4 5 20375 25 #0 QPSK 1755.00 -24.65 -13 PASS Band4 5 20375 25 #0 QAM16 1755.00 -25.86 -13 PASS Band4 10 20000 50 #0 QPSK 1709.98 -27.66 -13 PASS Band4 10 20000 50 #0 QAM16 1709.94 -28.40 -13 PASS Band4 10 20350 50 #0 QPSK 1755.02 -29.53 -13 PASS Band4 10 20350 50 #0 QAM16 1755.00 -30.31 -13 PASS Report Band4 15 20025 75 #0 QPSK 1709.94 -29.60 -13 PASS Band4 15 20025 75 #0 QAM16 1710.00 -3…

Text truncated - open the document above for the full version.

Report Band12 QPSK BW=5MHz Channel=23155 RB Size=25 Position=#0 Band12 QAM16 BW=5MHz Channel=23155 RB Size=25 Position=#0…

Text truncated - open the document above for the full version.