2ANMU-C90PROSmart Phone

C90 Pro 10 4800 C90 Pro Sub microphone receiver Sense of distanceLight sense TPYE - C interface Horn hole      1DQR 6,0 1DQR 6,0 SIM2CardSIM1Card The flash Sub camera Volume+ Volume- Main camera Macro CAM Fingerprint 1DQR 6,0 1DQR 6,0 oukitel.com oukitel.com Sub microphone receiver Sense of distanceLight sense TPYE - C interface Horn hole 10 4800 C90 Pro The flash Sub camera Volume+ Volume- Main camera Macro CAM Fingerprint      1DQR 6,0 1DQR 6,0 SIM2Card SIM1Card 1DQR 6,0 1DQR 6,0 oukitel.com 10 4800 C31 Pro ɜɬɨɪɢɱɧɵɣɦɢɤɪɨɮɨɧ ɩɪɢɺɦɧɢɤ ɩɪɟɞɜɚɪɢɬɟɥɶɧɵɣɤɚɦɟɪɚ ɱɭɜɫɬɜɨɞɚɥɶɧɨɫɬɢɱɭɜɫɬɜɨɫɜɟɬɚ ɢɧɬɟɪɮɟɣɫ73<(& ɦɢɤɪɨɮɨɧ ɪɭɩɨɪ    чемодан зарядное  устройство ɦɟɪɰɚɧɢɟ ɤɚɦɟɪɚ ɡɚɤɚɬɵɜɚɬɶ ɨɛɴɺɦ ɤɥɸɱɩɢɬɚɧɢɹ ɝɥɚɜɧɚɹɤɚɦɟɪɚ ɦɚɤɪɨ&$1 ɨɬɩɟɱɚɬɨɤɩɚɥɶɰɚ 1DQR 6,0 1DQR 6,0 SIM2Card SIM1Card 1DQR 6,0 1DQR 6,0 oukitel.com Sub microphone receiver Sense of distanceLight sense TPYE - C interface Horn hole 10 4800 C90 Pro The flash Sub camera Volume+ Volume- Main camera Macro CAM Fingerprint      1DQR 6,0 1DQR 6,0 SIM2CardSIM1Card 1DQR 6,0 1DQR 6,0 oukitel.com 10 4800 C90 Pro TPYE C  + - 1DQR 6,0 1DQR 6,0 SIM2Card SIM1Card 1DQR 6,0 1DQR 6,0 oukitel.com Sub microphone receiver Sense of distanceLight sense TPYE - C interface Horn hole 10 4800 C90 Pro The flash Sub camera Volume+ Volume- Main camera Macro CAM Fingerprint      1DQR 6,0 1DQR 6,0 SIM2Card SIM1Card 1DQR 6,0 1DQR 6,0 10 4800 C90 Pro Sub microphone receiver Sense of distanceLight sense TPYE - C interface Horn hole      The flash Sub camera Volume+ Volume- Main camera Macro CAM Fingerprint 1DQR 6,0 1DQR 6,0 SIM2CardSIM1Card 1DQR 6,0 1DQR 6,0 ϡρϙέϭθϭϥΙ΍ϥϭρ ΍αΕϝϡ ΃ϡ΍ϡ΍ϝϙ΍ϡρέ΍ ΏωΩ΍ϝεωϭέ νϭ˯΍ϝεωϭέ WS\HFϭ΍ΝϩΓ ϡρϙέϭθϭϥ ΙφΏ΍ϝφέϥ 10 4800 C90 Pro ϝφΩΕϭϡν ϙ΍ϡρέ΍ϡα΍ωΩΓ ϝθΓ ΡΝϡ ϡθΕ΍Ρ΍ϝρ΍φΓ ΍ϝϙ΍ϡρέ΍΍ϝέΉραρΓ ΍ϝϡ΍ϙέϭϙ΍ϡ ΏιϡΓ لقانلا  يلسلستلا  ماعلا  عون  ج ةبيقح  ةيدلج نحاش 1DQR 6,0 1DQR 6,0 SIM2Card SIM1Card 1DQR 6,0 1DQR 6,0 FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Smart Phone (FCC ID: 2ANMU-C90PRO) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical operations 10mm from the body. To maintain compliance with FCC RF exposure requirements, 10mm separation distance should. maintained to the user's bodies NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is c onnected. -- Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2ANMU-C90PRO RF Specification: FunctionOperation Frequency Max RF output power: Limit BLE2402MHz–2480MHz-5.6 dBm20 dBm. BT(BR+EDR)2402MHz–2480MHz 6.23dBm 20 dBm. WIFI 802.11b/g/ n(HT20/40) 802.11b/g/n(20MHz): 2412~2472MHz; 802.11n(40MHz):2422~2462MHz 16.2dBm 20 dBm. Wi-Fi 5.2G(802.11a/n20/n40/ ac20/ac40/ac80) 802.11a/ n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz 802.11 ac80:5210MHz 10.2 dBm 23 dBm. Wi-Fi 5.8G(802.11a/n20/n40/ ac20/ac40/ac80) 802.11a/ n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz 802.11 ac80:5210MHz 10.91 dBm 23 dBm. GSM/GPRS/EGPRS 900 TX(Uplink):880M-915MHZ; RX(Downlink):925M-960MHZ 32.41 dBm class 4 (33±3dBm) GSM/GPRS/EGPRS 1800 TX(Uplink):1710M-1785MHZ; RX(Downlink):1805M-1880MHZ 29.43 dBm class 1 (30±3dBm) WCDMA B1 TX(Uplink):1920-1980MHz; RX(Downlink):2110-2170MHz 23.54 dBm 24 (dBm) +1,7/-3,7 (dB) WCDMA B8 TX(Uplink): 880-915MHz; RX(Downlink):925-960MHz 22.43 dBm 24 (dBm) +1,7/-3,7 (dB) LTE FDD B1 TX(Uplink):1920-1980MHz; RX(Downlink):2110-2170MHz 24.29dBm 23(dBm) ±2,7(dB) LTE FDD B3 TX(Uplink) :1710-1785MHz; RX(Downlink):1805-1880MHz 24.35 dBm 23(dBm) ±2,7(dB) LTE FDD B7 TX(Uplink) :2500-2570MHz; RX(Downlink):2620-2690MHz 24.06 dBm 23(dBm) ±2,7(dB) LTE FDD B8 TX(Uplink): 880MHz to 915 MHz RX(Downlink): 925 MHz to 960 MHz 23.67 dBm 23(dBm) ±2,7(dB) LTE FDD B20 TX(Uplink) 832MHz~862MHz; RX(Downlink)791MHz~821MHz 23.32dBm23(dBm) ±2,7(dB) NR TDD n78 Uplink & Downlink:3300 MHz to 3800 MHz 23.34 dBm23(dBm) +3,0/-4.0 (dB) EN DC_20A_n78A Band 20: TX(Uplink) 832MHz~862MHz; RX(Downlink)791MHz~821…

Text truncated - open the document above for the full version.

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Agent Authorization Letter (2021-11-07) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li [email protected] to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Junfei Zhao / Manager Date/City: 2021-11-07 / Shenzhen Phone: +86-755-83834509 Fax: +86-755-83838762 E-mail: [email protected]

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Family models difference declaration Smart Phone Model: C90 Pro , C90, C90 S Difference declaration: All the model are the same circuit and RF module, except the model name. Regards, Signature Junfei Zhao / Manager Date/City: 2021-11-07 / Shenzhen Phone: +86-755-83834509 Fax: +86-755-83838762 E-mail: [email protected]

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Long Term Confidentiality Request Letter (2021-11-07 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: Smart Phone Model: C90 Pro, C90, C90 S FCC ID: 2ANMU-C90PRO To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the  Schematic Diagram  Block Diagram  Part List / BOM List / PCB Layout  Operational Description  NII software security letter  Tune-up Procedure Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Junfei Zhao / Manager Date/City: 2021-11-07 / Shenzhen Phone: +86-755-83834509 Fax: +86-755-83838762 E-mail: [email protected]

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Short Term Confidentiality Request Letter (2021-11-07) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: Smart Phone Model: C90 Pro, C90, C90 S FCC ID: 2ANMU-C90PRO To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Junfei Zhao / Manager Date/City: 2021-11-07 / Shenzhen Phone: +86-755-83834509 Fax: +86-755-83838762 E-mail: [email protected]

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

□UKITEL Smart Phone Model : : C90 Pro FCC ID:2ANMU-C90PRO IMEl1: 350000000000014 111111111111111 Ill Ill II II IIIIII I Ill II Ill IMEl2: 350000000000022 II 1111111111111111 Ill llll llllll I II II I Ill Manufacturer:SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 峚CE®互汒 MADE IN CHINA

Photo 9 Photo 10 NFC ANT Photo 11 Photo 12 Photo 13 Photo 14 Photo 15 Photo 16 Photo 17 Photo 18 Photo 19 Photo 20 Photo 21 Photo 22 Photo 23 Photo 24 Photo 25 Photo 26

Page 1 of 243 Report No.: S22082604108001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Smart Phone Brand Name： OUKITEL Model Name： C90 Pro Family Model： C90, C90 S Report No.： S22082604108001 FCC ID： 2ANMU-C90PRO Prepared for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA,SHENZHEN CHINA Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 243 Report No.: S22082604108001 TEST RESULT CERTIFICATION Applicant’s name ................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address .................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA,SHENZHEN CHINA Manufacturer's Name .......... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address .................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA,SHENZHEN CHINA Product description Product name ........................ : Smart Phone Brand Name ......................... : OUKITEL Model and/or type reference : C90 Pro Family Model ......................... : C90, C90 S Standards ............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number ............................. S220826041003 Date of Test Date (s) of performance of tests .............. : Aug. 29, 2022 ~ Sep. 14, 2022 Date of Issue ........................................... : Oct. 18, 2022 Test Result ............................................... : Pass Prepared By (Test Engineer) : (Jacob Chen) Approved By (Lab Manager) : (Alex Li) Page 3 of 243 Report No.: S22082604108001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Oct. 18, 2022 Jacob Chen Page 4 of 243 Report No.: S22082604108001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E-Field Probe .......................................................................................... 12 2.3.1. E-Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 22 4.2. System Verification Procedure .............................................................. 23 4.2.1. System Verification Results .............................................................. 24 5. SAR Measurement variability and uncertainty .................................................. 25 5.1. SAR measurement variability ................................................................. 25 5.2. SAR measurement uncertai…

Text truncated - open the document above for the full version.

Page 151 of 243 Report No.: S22082604108001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.3643 0.2389 0.1375 0.0896 0.0538 0.0381 0.0296 3D screen shot Hot spot position Page 152 of 243 Report No.: S22082604108001 MEASUREMENT 30 Date of measurement: 6/9/2022 A. Experimental conditions. Area Scan dx=12mm dy=12mm, h= 5.00 mm ZoomScan 7x7x7,dx=5mm dy=5mm dz=5mm Phantom Validation plane Device Position Body Band NR SA n41 Channels Middle Signal (Crest factor: 1.6) ConvF 1.87 B. SAR Measurement Results Frequency (MHz) 2592.990000 Relative permittivity (real part) 37.869492 Relative permittivity (imaginary part) 13.397094 Conductivity (S/m) 1.929918 Variation (%) -0.680000 SURFACE SAR VOLUME SAR Maximum location: X=12.00, Y=-20.00 SAR Peak: 0.88 W/kg SAR 10g (W/Kg) 0.251048 SAR 1g (W/Kg) 0.500187 Page 153 of 243 Report No.: S22082604108001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.8841 0.5389 0.2756 0.1436 0.0748 0.0463 0.0308 3D screen shot Hot spot position Page 154 of 243 Report No.: S22082604108001 14. Appendix D. Calibration Certificate Table of contents E Field Probe - SN 08/16 EPGO287 750 MHz Dipole - SN 03/15 DIP 0G750-355 835 MHz Dipole - SN 03/15 DIP 0G835-347 1800 MHz Dipole - SN 03/15 DIP 1G800-349 1900 MHz Dipole - SN 03/15 DIP 1G900-350 2450 MHz Dipole - SN 03/15 DIP 2G450-352 2600 MHz Dipole - SN 03/15 DIP 2G600-356 5000-6000 MHz Dipole - SN 13/14 WGA 33 Extended Calibration Certificate Page 155 of 243 Report No.: S22082604108001 Page 156 of 243 Report No.: S22082604108001 Page 157 of 243 Report No.: S22082604108001 Page 158 of 243 Report No.: S22082604108001 Page 159 of 243 Report No.: S22082604108001 Page 160 of 243 Report No.: S22082604108001 Page 161 of 243 Report No.: S22082604108001 Page 162 of 243 Report No.: S22082604108001 Page 163 of 243 Report No.: S22082604108001 Page 164 of 243 Report No.: S22082604108001 Page 165 of 243 Report No.: S22082604108001 Page 166 of 243 Report No.: S22082604108001 Page 167 of 243 Report No.: S22082604108001 Page 168 of 243 Report No.: S22082604108001 Page 169 of 243 Report No.: S22082604108001 Page 170 of 243 Report No.: S22082604108001 Page 171 of 243 Report No.: S22082604108001 Page 172 of 243 Report No.: S22082604108001 Page 173 of 243 Report No.: S22082604108001 Page 174 of 243 Report No.: S22082604108001 Page 175 of 243 Report No.: S22082604108001 Page 176 of 243 Report No.: S22082604108001 Page 177 of 243 Report No.: S22082604108001 Page 178 of 243 Report No.: S22082604108001 Page 179 of 243 Report No.: S22082604108001 Page 180 of 243 Report No.: S22082604108001 Page 181 of 243 Report No.: S22082604108001 Page 182 of 243 Report No.: S22082604108001 Page 183 of 243 Report No.: S22082604108001 Page 184 of 243 Report No.: S22082604108001 Page 185 of 243 Report No.: S22082604108001 Page 186 of 243 Report No.: S22082604108001 Page 187 of 243 Report No.: S22082604108001 Page 188 of 243 Report No.: S22082604108001 Page 189 of 243 Report No.: S22082604108001 Page 190 of 243 Report No.: S22082604108001 Page 191 of 243 Report No.: S22082604108001 Page 192 of 243 Report No.: S22082604108001 Page 193 of 243 Report No.: S22082604108001 Page 194 of 243 Report No.: S22082604108001 Page 195 of 243 Report No.: S22082604108001 Page 196 of 243 Report No.: S22082604108001 Page 197 of 243 Report No.: S22082604108001 Page 198 of 243 Report No.: S22082604108001 Page 199 of 243 Report No.: S22082604108001 Page 200 of 243 Report No.: S22082604108001

Page 201 of 243 Report No.: S22082604108001 Page 202 of 243 Report No.: S22082604108001 Page 203 of 243 Report No.: S22082604108001 Page 204 of 243 Report No.: S22082604108001 Page 205 of 243 Report No.: S22082604108001 Page 206 of 243 Report No.: S22082604108001 Page 207 of 243 Report No.: S22082604108001 Page 208 of 243 Report No.: S22082604108001 Page 209 of 243 Report No.: S22082604108001 Page 210 of 243 Report No.: S22082604108001 Page 211 of 243 Report No.: S22082604108001 Page 212 of 243 Report No.: S22082604108001 Page 213 of 243 Report No.: S22082604108001 Page 214 of 243 Report No.: S22082604108001 Page 215 of 243 Report No.: S22082604108001 Page 216 of 243 Report No.: S22082604108001 Page 217 of 243 Report No.: S22082604108001 Page 218 of 243 Report No.: S22082604108001 Page 219 of 243 Report No.: S22082604108001 Page 220 of 243 Report No.: S22082604108001 Page 221 of 243 Report No.: S22082604108001 Page 222 of 243 Report No.: S22082604108001 Page 223 of 243 Report No.: S22082604108001 Page 224 of 243 Report No.: S22082604108001 Page 225 of 243 Report No.: S22082604108001 Page 226 of 243 Report No.: S22082604108001 Page 227 of 243 Report No.: S22082604108001 Page 228 of 243 Report No.: S22082604108001 Page 229 of 243 Report No.: S22082604108001 Page 230 of 243 Report No.: S22082604108001 Page 231 of 243 Report No.: S22082604108001 Page 232 of 243 Report No.: S22082604108001 Page 233 of 243 Report No.: S22082604108001 Page 234 of 243 Report No.: S22082604108001 Page 235 of 243 Report No.: S22082604108001 Page 236 of 243 Report No.: S22082604108001 <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.80 - 56.4 - Mar. 01, 2021 -23.642 0.66 56.998 0.598 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 237 of 243 Report No.: S22082604108001 <Head 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -25.44 - 54.40 - Mar. 01, 2021 -25.803 1.43 54.492 0.092 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 238 of 243 Report No.: S22082604108001 <Head 1800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -28.85 - 47.90 - Mar. 01, 2021 -28.545 1.06 47.809 0.091 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 239 of 243 Report No.: S22082604108001 <Head 1900MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -24.79 - 50.80 - Mar. 01, 2021 -24.518 1.10 50.516 0.284 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 240 of 243 Report No.: S22082604108001 <Head 2450MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.18 - 56.30 - Mar. 01, 2021 -23.39 0.91 56.342 0.042 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 241 of 243 Report No.: S22082604108001 <Head 2600MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -21.15 - 52.70 - Mar. 01, 2021 -21.248 0.46 53.053 0.353 Feb. 28, 2022 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 242 of 243 Report No.: S22082604108001 <Head 5200MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -9.15 - 21.17 - Mar. 01, 2021 -9.1819 0.35 21.191 0.021 Feb. 28, 2022 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 243 of 243 Report No.: S22082604108001 <Head 5800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -14.30 - 54.74 - Mar. 01, 2021 -14.349 0.34 55.115 0.375 Feb. 28, 2022 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data _______________________________________END _____________________________________

Report No.: S22082604107007 Page 1 of 116 1 Conducted output power for NR FR1 Band SCS (kHz) Bandwidth (MHz) UL Channel RB Allocation Modulation Power (dBm) Verdict n41 30 10 500202 1@1 DFT_BPSK 23.01 PASS n41 30 10 500202 24@0 DFT_QPSK 22.19 PASS n41 30 10 500202 12@6 DFT_QPSK 23.00 PASS n41 30 10 500202 1@1 DFT_QPSK 22.90 PASS n41 30 10 500202 1@22 DFT_QPSK 22.77 PASS n41 30 10 500202 1@1 DFT_QAM16 22.17 PASS n41 30 10 500202 1@1 DFT_QAM64 21.10 PASS n41 30 10 500202 1@1 DFT_QAM256 21.08 PASS n41 30 10 500202 1@1 CP_QPSK 21.09 PASS n41 30 10 518598 1@1 DFT_BPSK 23.07 PASS n41 30 10 518598 24@0 DFT_QPSK 22.23 PASS n41 30 10 518598 12@6 DFT_QPSK 23.13 PASS n41 30 10 518598 1@1 DFT_QPSK 22.90 PASS n41 30 10 518598 1@22 DFT_QPSK 22.94 PASS n41 30 10 518598 1@1 DFT_QAM16 22.52 PASS n41 30 10 518598 1@1 DFT_QAM64 21.05 PASS n41 30 10 518598 1@1 DFT_QAM256 21.07 PASS n41 30 10 518598 1@1 CP_QPSK 20.96 PASS n41 30 10 537000 1@1 DFT_BPSK 23.24 PASS n41 30 10 537000 24@0 DFT_QPSK 22.42 PASS n41 30 10 537000 12@6 DFT_QPSK 23.22 PASS n41 30 10 537000 1@1 DFT_QPSK 22.97 PASS n41 30 10 537000 1@22 DFT_QPSK 23.43 PASS n41 30 10 537000 1@1 DFT_QAM16 22.25 PASS n41 30 10 537000 1@1 DFT_QAM64 21.19 PASS n41 30 10 537000 1@1 DFT_QAM256 21.10 PASS n41 30 10 537000 1@1 CP_QPSK 21.12 PASS n41 30 15 500700 1@1 DFT_BPSK 22.98 PASS n41 30 15 500700 36@0 DFT_QPSK 22.09 PASS n41 30 15 500700 18@9 DFT_QPSK 23.14 PASS n41 30 15 500700 1@1 DFT_QPSK 22.75 PASS n41 30 15 500700 1@36 DFT_QPSK 22.79 PASS n41 30 15 500700 1@1 DFT_QAM16 20.66 PASS n41 30 15 500700 1@1 DFT_QAM64 20.95 PASS n41 30 15 500700 1@1 DFT_QAM256 20.95 PASS n41 30 15 500700 1@1 CP_QPSK 21.01 PASS n41 30 15 518598 1@1 DFT_BPSK 23.13 PASS n41 30 15 518598 36@0 DFT_QPSK 22.25 PASS n41 30 15 518598 18@9 DFT_QPSK 23.28 PASS n41 30 15 518598 1@1 DFT_QPSK 23.20 PASS n41 30 15 518598 1@36 DFT_QPSK 23.27 PASS Report No.: S22082604107007 Page 2 of 116 n41 30 15 518598 1@1 DFT_QAM16 22.21 PASS n41 30 15 518598 1@1 DFT_QAM64 21.03 PASS n41 30 15 518598 1@1 DFT_QAM256 21.02 PASS n41 30 15 518598 1@1 CP_QPSK 20.99 PASS n41 30 15 536496 1@1 DFT_BPSK 23.09 PASS n41 30 15 536496 36@0 DFT_QPSK 22.35 PASS n41 30 15 536496 18@9 DFT_QPSK 23.35 PASS n41 30 15 536496 1@1 DFT_QPSK 22.93 PASS n41 30 15 536496 1@36 DFT_QPSK 23.01 PASS n41 30 15 536496 1@1 DFT_QAM16 22.16 PASS n41 30 15 536496 1@1 DFT_QAM64 21.17 PASS n41 30 15 536496 1@1 DFT_QAM256 21.12 PASS n41 30 15 536496 1@1 CP_QPSK 21.11 PASS n41 30 20 501204 1@1 DFT_BPSK 23.04 PASS n41 30 20 501204 50@0 DFT_QPSK 22.19 PASS n41 30 20 501204 25@12 DFT_QPSK 23.26 PASS n41 30 20 501204 1@1 DFT_QPSK 23.12 PASS n41 30 20 501204 1@49 DFT_QPSK 23.02 PASS n41 30 20 501204 1@1 DFT_QAM16 22.36 PASS n41 30 20 501204 1@1 DFT_QAM64 21.11 PASS n41 30 20 501204 1@1 DFT_QAM256 21.03 PASS n41 30 20 501204 1@1 CP_QPSK 21.07 PASS n41 30 20 518598 1@1 DFT_BPSK 23.15 PASS n41 30 20 518598 50@0 DFT_QPSK 22.32 PASS n41 30 20 518598 25@12 DFT_QPSK 23.33 PASS n41 30 20 518598 1@1 DFT_QPSK 23.22 PASS n41 30 20 518598 1@49 DFT_QPSK 23.09 PASS n41 30 20 518598 1@1 DFT_QAM16 22.35 PASS n41 30 20 518598 1@1 DFT_QAM64 21.07 PASS n41 30 20 518598 1@1 DFT_QAM256 21.19 PASS n41 30 20 518598 1@1 CP_QPSK 21.25 PASS n41 30 20 535998 1@1 DFT_BPSK 23.15 PASS n41 30 20 535998 50@0 DFT_QPSK 22.37 PASS n41 30 20 535998 25@12 DFT_QPSK 23.42 PASS n41 30 20 535998 1@1 DFT_QPSK 23.11 PASS n41 30 20 535998 1@49 DFT_QPSK 23.24 PASS n41 30 20 535998 1@1 DFT_QAM16 22.37 PASS n41 30 20 535998 1@1 DFT_QAM64 21.24 PASS n41 30 20 535998 1@1 DFT_QAM256 21.20 PASS n41 30 20 535998 1@1 CP_QPSK 23.10 PASS n41 30 40 503202 1@1 DFT_BPSK 22.63 PASS n41 30 40 503202 100@0 DFT_QPSK 22.08 PASS n41 30 40 503202 50@25 DFT_QPSK 23.13 PASS n41 30 40 503202 1@1 DFT_QPSK 22.46 PASS Report No.: S22082604107007 Page 3 of 116 n41 30 40 503202 1@104 DFT_QPSK 22.62 PASS n41 30 40 503202 1@1 DFT_QAM16 21.69 PASS n41 30 40 503202 1@1 DFT_QAM64 20.64 PASS n41 30 40 503202 1@1 DFT_QAM256 20.70 PASS n41 30 40 503202 1@1 CP_QPSK 20.67 PASS n41 30 40 518598 1@1 DFT_BPSK 22.54 PASS n41 30 40 518598 100@0 DFT_QPSK 22.16 PASS n41 30 40 518598 50@25 DFT_QPSK 23.15 PASS n41 30 40 518598 1@1 DFT_QPSK 22.55 PASS n41 30 40 518598 1@104 DFT_QPSK 22.66 PASS n41 30 40 518598 1@1 DFT_QAM16 21.62 PASS n41 30 40 518598 1@1 DFT_QAM64 20.23 PASS n41 30 40 518598 1@1 DFT_QAM256 20.39 PASS n41 30 40 518598 1@1 CP_QPSK 22.44 PASS n41 30 40 534000 1@1 DFT_BPSK 22.63 PASS n41 30 40 534000 100@0 DFT_QPSK 22.18 PASS n41 30 40 534000 50@25 DF…

Text truncated - open the document above for the full version.