2ANMU-RT3Tablet

Light Sensor Speaker sound hole2 Speaker sound hole1 MIC air vent rear main camera macro camera Power button 9 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg veraged over one gram of tissue. Device types Tablet (RT3) (FCC ID:2ANMU-RT3) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the body is 0.722W/kg and Simultaneous Transmission is 1.18W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly.The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided 5150 RT3 11 13 oukitel.com 15

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Model Difference 2022/12/13 EUT NAME: Tablet Trademark: OUKITEL MODEL : RT3，RT3 Pro，RT3 S FCC ID: 2ANMU-RT3 All the model are the same circuit and RF module, except model names. Sincerely Client’s signature Client’s signature: Client’s name / title : Gaolei Yan / Manager Contact information / address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, 518XXX China

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 2022.12.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Tablet Trademark: OUKITEL MODEL : RT3，RT3 Pro，RT3 S FCC ID: 2ANMU-RT3 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description - FCC Software Security Requirements for UNII devices Rev 2.1 - Tune-up Procedure - BOM required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Gaolei Yan / Manager Contact information / address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, 518XXX China

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 2022.12.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Tablet Trademark: OUKITEL MODEL : RT3，RT3 Pro，RT3 S FCC ID: 2ANMU-RT3 To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Gaolei Yan / Manager Contact information / address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, 518XXX China

External Photos

40*30MM Label location

Internal Photos Main Antenna 2G/3G/4G DIV Antenna 2G/3G/4G BT/WIFI Antenna

Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 55 of 222 Edition：A.4 Band17 10 23780 25 #Mid QAM16 20.71 Band17 10 23780 25 #Max QAM16 20.31 Band17 10 23780 50 #0 QAM16 20.53 Band17 10 23790 1 #0 QPSK 22.84 Band17 10 23790 1 #Mid QPSK 22.76 Band17 10 23790 1 #Max QPSK 22.50 Band17 10 23790 25 #0 QPSK 21.52 Band17 10 23790 25 #Mid QPSK 21.57 Band17 10 23790 25 #Max QPSK 21.17 Band17 10 23790 50 #0 QPSK 21.37 Band17 10 23790 1 #0 QAM16 21.69 Band17 10 23790 1 #Mid QAM16 21.38 Band17 10 23790 1 #Max QAM16 21.26 Band17 10 23790 25 #0 QAM16 20.55 Band17 10 23790 25 #Mid QAM16 20.57 Band17 10 23790 25 #Max QAM16 20.23 Band17 10 23790 50 #0 QAM16 20.38 Band17 10 23800 1 #0 QPSK 22.79 Band17 10 23800 1 #Mid QPSK 22.61 Band17 10 23800 1 #Max QPSK 22.45 Band17 10 23800 25 #0 QPSK 21.58 Band17 10 23800 25 #Mid QPSK 21.66 Band17 10 23800 25 #Max QPSK 21.29 Band17 10 23800 50 #0 QPSK 21.48 Band17 10 23800 1 #0 QAM16 22.20 Band17 10 23800 1 #Mid QAM16 21.92 Band17 10 23800 1 #Max QAM16 21.87 Band17 10 23800 25 #0 QAM16 20.58 Band17 10 23800 25 #Mid QAM16 20.67 Band17 10 23800 25 #Max QAM16 20.33 Band17 10 23800 50 #0 QAM16 20.46 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 56 of 222 Edition：A.4 WIFI2.4G Mode Frequency (MHz) Conducted Power (dBm) b 2412 15.29 b 2437 15.61 b 2462 15.59 g 2412 14.03 g 2437 14.06 g 2462 13.76 n20 2412 12.62 n20 2437 12.77 n20 2462 12.54 n40 2422 11.86 n40 2437 12.02 n40 2452 12.02 Note: SAR is not required for the following 2.4 GHz OFDM conditions as the highest reported SAR for DSSS is adjusted by the ratio of OFDM to DSSS specified maximum output power and the adjusted SAR is ≤ 1.2 W/kg. WIFI5.1G Mode Frequency (MHz) Conducted Power (dBm) a 5180 13.31 a 5200 13.13 a 5240 13.18 n20 5180 11.78 n20 5200 11.58 n20 5240 11.58 n40 5190 10.74 n40 5230 11.42 ac20 5180 11.52 ac20 5200 11.24 ac20 5240 11.57 ac40 5190 10.94 ac40 5230 11.27 ac80 5210 9.37 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 57 of 222 Edition：A.4 WIFI5.8G Mode Frequency (MHz) Conducted Power (dBm) a 5745 7.3 a 5785 6.58 a 5825 6.56 n20 5745 6.25 n20 5785 4.97 n20 5825 4.72 n40 5755 4.78 n40 5795 4.55 ac20 5745 5.74 ac20 5785 4.8 ac20 5825 4.82 ac40 5755 4.88 ac40 5795 4.17 ac80 5775 3.58 Bluetooth Mode Frequency (MHz) Conducted Power (dBm) 1-DH1 2402 2.27 1-DH1 2441 2.4 1-DH1 2480 2.4 2-DH1 2402 1.37 2-DH1 2441 1.47 2-DH1 2480 1.49 3-DH1 2402 1.51 3-DH1 2441 1.56 3-DH1 2480 1.57 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 58 of 222 Edition：A.4 Frequency Maximum Conducted Output Power(PK) (MHz) (dBm) GFSK 1Mbps 2402 -4.1 2440 -4.01 2480 -4.22 GFSK 2Mbps 2402 -4.12 2440 -4.1 2480 -4.29 Per KDB 447498 D01v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separationdistances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for1-g SAR and ≤ 7.5 for 10-g extremity SAR f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Bluetooth Turn up Power (dBm) Separation Distance (mm) Frequency (GHz) Exclusion Thresholds 2.5 5 2.45 0.6 Per KDB 447498 D01v06, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied todetermine SAR test exclusion. The test exclusion threshold is 0.6< 3.0, SAR testing is not required. Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 59 of 222 Edition：A.4 14.2 Transmit Antennas and SAR Measurement Position Antenna information: BT/WIFI Antenna TX/RX 234G Antenna TX/RX Note: 1). Per KDB648474 D04, 10-g extremity SAR is not required when Body-Worn mode 1-g reported SAR < 1.2 W/Kg. 2). According to the KDB941225 D06 Hot Spot SAR v02, the edges with less than 25 mm distance to the antennas need to be tested for SAR. Distance of The Antenna to the EUT surface and edge (mm) Antennas Front Back Top Side Bottom Side Left Side Right Side BT <5 <5 <5 187 105 <5 WWAN <5 <5 <5 186 <5 107 Positions for SAR tests; Hotspot mode Antennas Front Back Top Side Bottom Side Left Side Right Side BT Yes Yes Yes No No Yes WWAN Yes Yes Yes No Yes No General Note: Referring to KDB 941225 D06 v02, When the overall device length and width are 9cm*5cm, the test distance is 0mm, SAR must be measured for all sides and surfaces with a transmitting antenna located with 25mm from that surface or edge. 238mm 137mm 208 mm Bottom Left Right Rear View BT/WIFI Antenna Top WWAN Antenna Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 60 of 222 Edition：A.4 14.3 Test Results for Standalone SAR Test The calculated SAR is obtained by the following formula: Reported SAR=Measured SAR*10(Ptarget-Pmeasured))/10 Scaling factor=10(Ptarget-Pmeasured))/10 Reported SAR= Measured SAR* Scaling factor Where Ptarget is the power of manufacturing upper limit; Pmeasured is the measured power; Measured SAR is measured SAR at measured power which including power drift) Reported SAR which including Power Drift and Scaling factor Duty Cycle Test Mode Duty Cycle GSM 4:8 UMTS 1:1 LTE 1:1 BT 1:1 WIFI 1:1 SAR Values [GSM 850] Remark: 1. The value with black color is the maximum SAR Value of each test band. 2. The frame average of GPRS (4Tx slots) higher than GSM and sample can support VoIP function, tested at GPRS (4Tx slots) mode for head. 3. Per FCC KDB Publication 447498 D01, if the reported (scaled) SAR measured at the middle channel or highest output power channel for each test configuration is ≤ 0.8 W/kg then testing at the other channels is optional for such test configuration(s). SAR Values [GSM 1900] Ch. Freq. (MHz) Time slots Test Position Conducte d Power (dBm) Maximu m Allowed Power (dBm) Powe r Drift (%) Scalin g Factor SAR1-g results(W/kg) Graph Result s Measured Reported measured / reported SAR numbers - Body (hotspot open, distance 10mm) 810 1909.8 4Txslots Front 23.03 23.50 N/A 1.114 0.612 0.682 810 1909.8 4Txslots Rear 23.03 23.50 N/A 1.114 0.64…

Text truncated - open the document above for the full version.

Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 118 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 119 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 120 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 121 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 122 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 123 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 124 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 125 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 126 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 127 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 128 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 129 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 130 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 131 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 132 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 133 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 134 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 135 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 136 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 137 of 222 Edition：A.4

Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 138 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 139 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 140 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 141 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 142 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 143 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 144 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 145 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 146 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 147 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 148 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 149 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 150 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 151 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 152 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 153 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 154 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 155 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 156 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 157 of 222 Edition：A.4

Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 158 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 159 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 160 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 161 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 162 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 163 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 164 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 165 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 166 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 167 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 168 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 169 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 170 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 171 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 172 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 173 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 174 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 175 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 176 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 177 of 222 Edition：A.4

Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 178 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 179 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 180 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 181 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 182 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 183 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 184 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 185 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 186 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 187 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 188 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 189 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 190 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 191 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 192 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 193 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 194 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 195 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 196 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 197 of 222 Edition：A.4

Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 198 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 199 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 200 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 201 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 202 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 203 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 204 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 205 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 206 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 207 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 208 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 209 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 210 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 211 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 212 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 213 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 214 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 215 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 216 of 222 Edition：A.4 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 217 of 222 Edition：A.4 17. EUT Photographs EUT Front View EUT Back View Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 218 of 222 Edition：A.4 Antenna View Main Antenna 2G/3G/4G DIV Antenna 2G/3G/4G BT/WIFI Antenna Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 219 of 222 Edition：A.4 18. EUT Test Setup Photographs Body mode Exposure Conditions Test distance: 0mm Front Back Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 220 of 222 Edition：A.4 Top Left Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 221 of 222 Edition：A.4 Right Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 222 of 222 Edition：A.4 STATEMENT 1.The equipment lists are traceable to the national reference standards. 2.The test report can not be partially copied unless prior written approval is issued from our lab. 3.The test report is invalid without stamp of laboratory. 4.The test report is invalid without signature of person(s) testing and authorizing. 5.The test process and test result is only related to the Unit Under Test. 6.The quality system of our laboratory is in accordance with ISO/IEC17025. 7.If there is any objection to report, the client should inform issuing laboratory within 15 days from the date of receiving test report. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China TEL：400-788-9558 1) C.: 518103 FAX：0755-33229357 Website：http://www.chnbctc.com E-Mail：[email protected] ※※※※※ END ※※※※※

No.：BCTC/RF-EMC-005 Page 1 of 222 Edition：A.4 SAR TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2211946586E Applicant: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Product Name: Tablet Model/Type Ref.: RT3 Tested Date: 2022-11-20 to 2022-12-10 Issued Date: 2022-12-26 Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 2 of 222 Edition：A.4 FCC ID: 2ANMU-RT3 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Tablet Trademark: OUKITEL Model/Type Ref.: RT3 RT3 Pro, RT3 S Applicant: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, 518XXX China Manufacturer: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, 518XXX China Factory: N/A Address: N/A Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Sample Received Date: 2022-11-20 Sample tested Date: 2022-11-20 to 2022-12-10 Issue Date: 2022-12-26 Test Standards: IEEE Std C95.1, 2019/ IEEE Std 1528™-2013/FCC Part 2.1093 Test Results: PASS Remark: This is SAR test report Tested by: Approved by: Jack Li/Project Handler Zero Zhou/Reviewer Report No：BCTC2211946586E No.：BCTC/RF-EMC-005 Page 3 of 222 Edition：A.4 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Standards ...................................................................................................... 6 3. Test Summary ....................................................................................................... 7 4. SAR Limits............................................................................................................. 8 5. Measurement Uncertainty ..................................................................................... 9 6. Product Information And Test Setup ................................................................... 11 6.1 Product Information ............................................................................................. 11 6.2 Test Setup Configuration .................................................................................... 14 6.3 Support Equipment ............................................................................................. 14 6.4 Test Environment ................................................................................................ 14 7. Test Facility And Test Instrument Used ............................................................... 15 7.1 Test Facility ......................................................................................................... 15 7.2 Test Instrument Used .......................................................................................... 15 8. Specific Absorption Rate (SAR) .......................................................................... 17 8.1 Introduction ......................................................................................................... 17 8.2 SAR Definition ..................................................................................................... 17 9. SAR Measurement System ................................................................................. 18 9.1 The Measurement System .................................................................................. 18 9.2 Probe .................................................................................................................. 18 9.3 Test Procedure ................................................................................................... 20 9.4 Phantom .............................................................................................................. 21 9.5 Phantom .............................................................................................................. 21 10. Tissue Simulating Liquids ............................................................................. 22 10.1 Composition of Tissue Simulating Liquid .......................................................... 22 10.2 Limit .................................................................................................................. 23 10.3 Tissue Calibration Result .................................................................................. 24 11. SAR Measurement Evaluation ...................................................................... 25 11.1 Purpose of System Performance Check ........................................................... 25 11.2 System Setup .................................................................................................... 25 11.3 Validation Results ............................................................................................. 25 12. EUT Testing Position .................................................................................... 26 12.1 Body Position .................................................................................................... 26 13. SAR Measurement Procedures..................................................................... 28 13.1 Measurement Procedures ................................................................................. 28 13.2 Spatial Peak SAR Evaluation ............................................................................ 28 13.3 Area & Zoom Scan Procedures ........................................................................ 29 13.4 Vol…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-007 Page: 1 of 108 Edition：A.5 Appendix for Band 2 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2211946586-6E Applicant: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Product Name: Tablet Model/Type reference: RT3 Tested Date: 2022-11-16 to 2022-12-08 Issued Date: 2022-12-09 Report No.: BCTC2211946586-6E No.：BCTC/RF-EMC-007 Page: 2 of 108 Edition：A.5 Contents Appendix 1. Conducted output power .................................................................................. 3 Appendix 2. Frequency stability ........................................................................................... 9 Appendix 3. Peak-to-Average Ratio ................................................................................... 18 Appendix 4. Occupied bandwidth ...................................................................................... 42 Appendix 5. Band edge...................................................................................................... 67 Appendix 6. Out-of-band emissions ................................................................................... 84 Report No.: BCTC2211946586-6E No.：BCTC/RF-EMC-007 Page: 3 of 108 Edition：A.5 Appendix 1. Conducted output power Band Bandwidth (MHz) UL Channel RB Size RB Position Modulation Power (dBm) Gain (dBm) EIRP (dBm) Verdict Band2 1.4 18607 1 #0 QPSK 22.59 -0.05 22.54 PASS Band2 1.4 18607 1 #Mid QPSK 22.71 -0.05 22.66 PASS Band2 1.4 18607 1 #Max QPSK 22.54 -0.05 22.49 PASS Band2 1.4 18607 3 #0 QPSK 22.61 -0.05 22.56 PASS Band2 1.4 18607 3 #Mid QPSK 22.62 -0.05 22.57 PASS Band2 1.4 18607 3 #Max QPSK 22.60 -0.05 22.55 PASS Band2 1.4 18607 6 #0 QPSK 21.59 -0.05 21.54 PASS Band2 1.4 18607 1 #0 QAM16 21.66 -0.05 21.61 PASS Band2 1.4 18607 1 #Mid QAM16 21.81 -0.05 21.76 PASS Band2 1.4 18607 1 #Max QAM16 21.72 -0.05 21.67 PASS Band2 1.4 18607 3 #0 QAM16 21.76 -0.05 21.71 PASS Band2 1.4 18607 3 #Mid QAM16 21.78 -0.05 21.73 PASS Band2 1.4 18607 3 #Max QAM16 21.80 -0.05 21.75 PASS Band2 1.4 18607 6 #0 QAM16 20.71 -0.05 20.66 PASS Band2 1.4 18900 1 #0 QPSK 22.69 -0.05 22.64 PASS Band2 1.4 18900 1 #Mid QPSK 22.93 -0.05 22.88 PASS Band2 1.4 18900 1 #Max QPSK 22.75 -0.05 22.70 PASS Band2 1.4 18900 3 #0 QPSK 22.81 -0.05 22.76 PASS Band2 1.4 18900 3 #Mid QPSK 22.81 -0.05 22.76 PASS Band2 1.4 18900 3 #Max QPSK 22.79 -0.05 22.74 PASS Band2 1.4 18900 6 #0 QPSK 21.77 -0.05 21.72 PASS Band2 1.4 18900 1 #0 QAM16 21.59 -0.05 21.54 PASS Band2 1.4 18900 1 #Mid QAM16 21.75 -0.05 21.70 PASS Band2 1.4 18900 1 #Max QAM16 21.59 -0.05 21.54 PASS Band2 1.4 18900 3 #0 QAM16 21.90 -0.05 21.85 PASS Band2 1.4 18900 3 #Mid QAM16 21.89 -0.05 21.84 PASS Band2 1.4 18900 3 #Max QAM16 21.95 -0.05 21.90 PASS Band2 1.4 18900 6 #0 QAM16 20.93 -0.05 20.88 PASS Band2 1.4 19193 1 #0 QPSK 22.93 -0.05 22.88 PASS Band2 1.4 19193 1 #Mid QPSK 23.11 -0.05 23.06 PASS Band2 1.4 19193 1 #Max QPSK 22.90 -0.05 22.85 PASS Band2 1.4 19193 3 #0 QPSK 22.86 -0.05 22.81 PASS Band2 1.4 19193 3 #Mid QPSK 22.88 -0.05 22.83 PASS Band2 1.4 19193 3 #Max QPSK 22.92 -0.05 22.87 PASS Band2 1.4 19193 6 #0 QPSK 21.99 -0.05 21.94 PASS Band2 1.4 19193 1 #0 QAM16 22.03 -0.05 21.98 PASS Band2 1.4 19193 1 #Mid QAM16 22.22 -0.05 22.17 PASS Report No.: BCTC2211946586-6E No.：BCTC/RF-EMC-007 Page: 4 of 108 Edition：A.5 Band2 1.4 19193 1 #Max QAM16 22.04 -0.05 21.99 PASS Band2 1.4 19193 3 #0 QAM16 22.05 -0.05 22.00 PASS Band2 1.4 19193 3 #Mid QAM16 22.08 -0.05 22.03 PASS Band2 1.4 19193 3 #Max QAM16 22.02 -0.05 21.97 PASS Band2 1.4 19193 6 #0 QAM16 21.09 -0.05 21.04 PASS Band2 3 18615 1 #0 QPSK 22.66 -0.05 22.61 PASS Band2 3 18615 1 #Mid QPSK 22.89 -0.05 22.84 PASS Band2 3 18615 1 #Max QPSK 22.74 -0.05 22.69 PASS Band2 3 18615 8 #0 QPSK 21.63 -0.05 21.58 PASS Band2 3 18615 8 #Mid QPSK 21.66 …

Text truncated - open the document above for the full version.