2AO8RNI-3250Sentry Camera

Sentry Camera Quick Guide NI-3250 FCC This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. FCC ID 2AO8RNI-3250 CE RED This product can be used across EU member states. Warning Catalogue 1. What’s In The Box 2. Camera Structure 3. Insert Micro SD Card 4. Read Before Installing 5. Set Up With Netvue App 6. Sentry Camera Installation 7. Status Light 8. Netvue Protect Plan P. 1 P. 2 P. 3 P. 4 P. 5 P. 6-12 P. 13 P. 14 Quick Guide X 4 Anchors Sentry Camera Power Adapter Weatherproof Tube What’s In The Box X 4 Mounting Screws Sentry Camera Quick Guide Drilling Template UP 1 Camera Structure Infrared LEDs Light Sensor Lens Wi-Fi Configuration Button Ethernet Cable Port Power Port Status Light Microphone Micro SD Card Slot Speaker Antenna T F 2 Micro SD Card Slot 1 2 Sentry Camera comes with a built-in card slot which supports up to 128GB Micro SD card. Once you insert the storage card, the camera will automati- cally start to record and store videos in the storage card. You can view those videos on the ‘Replay’ page by clicking the ‘Replay’ button in the ‘Homepage’. Step 1: Make sure your Sentry Camera is power off. Loosen the screws and then take off the cover. Step 2: Insert Micro SD card. Make sure you insert it in the correct direction. The Front of the card should face up. Step 3: Put the cover back and tighten the screws. Insert Micro SD Card RESET T F 3 1. Keep the Sentry Camera and all accessories out of reach of children and pets. 2. The Sentry Camera comes with a power adapter. If you prefer other power adapter, please make sure that it allows a DC12V (≥1000mA) power supply voltage. 3. The product can only be used at normal temperature and humidity: Working temperature: -10°C - 50°C (14°F-122°F) Working relative humidity: 0-95%. 4. Please do not expose the camera lens to direct sunlight. 5. Please do not install the camera where is likely struck by lightning. 4 Read Before Installing Note: 1. Netvue Sentry Camera only works with 2.4GHz Wi-Fi. 2. Strong lights may interfere with the ability to scan the QR code. 3. Avoid placing the device behind furniture or near microwaves. Try to keep it within range of your Wi-Fi signal. Set Up with Netvue App Download the Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process. 5 Check the following things before you start to drill holes on your wall: 1. Sentry Camera has been successfully added to your Netvue App and is able to stream video. 2. Have planned the cable route. Measured the length of the power cable and Ethernet cable (if you plan to use Ethernet connection) you will need. Sentry Camera Installation Step 1: Find a good installation spot. We recommend installing the Sentry camera just 7-10 feet (2-3 meters) above the ground for a better two-way audio experience. There is a power outlet nearby. Test whether Sentry camera can stream video smoothly at the spot. Make sure the camera’s sight is not blocked. 6 7 7-10 feet (2-3 meters) 11' 10' 9' 8' 7' 6' 5' 4' 3' 2' 1' Step 2: If you are going to install camera on wood, just skip this step. If you are going to install camera on concrete or brick: Before you start to drill, make sure you know the locations of wall-in pipes and electrical wires. (If you are not comfortable with drilling holes, please consult with a licensed electrician.) Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64", 6mm) to drill four holes, and then install anchors to hold screws. 1 2 8 Step 3: Loosen the security screw and take off the backplate, then install it on the wall by provided mounting screws. 1 2 9 3 10 1 2 Step 4: Hang Sentry Camera on the backplate, then tighten the security screw. 11 1 Step 5 (Wired Connection): Read this step if you are using wired connection, otherwise skip this step. A weatherproof tube is needed for Ethernet cable to avoid leaking water into Ethernet cable port. Insert the cable into the weatherproof tube, and then connect it to the Ethernet cable port of Sentry Camera. Make sure the cable works before installing. Things you need: Ethernet cable 3 2 Ethernet cable portEthernet …

Text truncated - open the document above for the full version.

Netvue Technologies Co.,Ltd. Date: Jun 03, 2020 FCC ID: 2AO8RNI-3250 Model Number: NI-3250, NI-3251, NI-3252, NI-3253, NI-3254, NI-3255, NI-3256, NI-3257, NI-3258, NI-3259 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Netvue Technologies Co.,Ltd. declare that this EUT (FCC ID: 2AO8RNI-3250) will conduct FCC compliance testing, the SDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely, (Signed) Name / Title: Stone feng / Manager Company: Netvue Technologies Co.,Ltd. Address: Room A501‐502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057 Phone: +86‐0755‐86227808 Fax: +86‐0755‐86227808 Email: [email protected]

Rev 11/20/07 (Netvue Technologies Co.,Ltd.) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AO8RNI-3250 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name  Block Diagram  Schematic Diagram  Operational Description   Block diagram  SCH  OPS  The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application for180 days as outlined below: Exhibit Type File Name  Test Setup Photos  Internal Photos  User Manual External Photographs  Test Setup photo---DTS  INT PHOTO  User Manual External Photographs Sincerely, Signature: Name: Stone feng Date:2020/06/03

(Netvue Technologies Co.,Ltd.) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/01/15 SUBJECT: FCC Application for FCC ID: 2AO8RNI-3250 To Whom It May Concern: We, the undersigned, hereby authorize Alex Li Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei Community, Xixiang Street, Baoan District Shenzhen China Tel: +86-755-6115-9384 Email: [email protected] on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by NTEK Testing Technology Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signatory 2020/06/03 Stone feng Netvue Technologies Co.,Ltd. Address: Room A501-502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057

Netvue Technologies Co.,Ltd. Family models declaration letter. 2020-06-03 We Company: Netvue Technologies Co.,Ltd. Address: Room A501-502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057 Product: Sentry Camera Model Name: NI-3250 Family Model: NI-3251,NI-3252,NI-3253,NI-3254,NI-3255,NI-3256,NI-3257,NI-3258,NI-3259 FCC ID: 2AO8RNI-3250 All models are the same circuit and RF module, except the model name. Thanks Sincerely, Signature 2020-06-03 Name: Stone feng Title: Manager

S20042802803 Model: NI-3250 N20191017V1 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 2.4G WiFi ANT S20042802803 Model: NI-3250 N20191017V1 Photo 3 Photo 4 S20042802803 Model: NI-3250 N20191017V1 Photo 5 Photo 6 S20042802803 Model: NI-3250 N20191017V1 Photo 7 Photo 8 S20042802803 Model: NI-3250 N20191017V1 Photo 9 Photo 10 S20042802803 Model: NI-3250 N20191017V1 Photo 11

label location

S20042802805 Model: NI-3250 N20191017V1 Photo 11 S20042802805 Model: NI-3250 N20191017V1 Photo 12 Photo 13 S20042802805 Model: NI-3250 N20191017V1 Photo 14 Photo 15 S20042802805 Model: NI-3250 N20191017V1 Photo 16 Photo 17 S20042802805 Model: NI-3250 N20191017V1 Photo 18 Photo 19 S20042802805 Model: NI-3250 N20191017V1 Photo 20 Photo 21

FCC ID: 2AO8RNI-3250 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 11.1 Friis transmission formula: Pd= (Pout*G)\ (4*pi*R 2 ) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1416 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. mW=10^(dBm/10) 11.2 Measurement Result Operation Frequency: 2412MHz~2462MHz Power density limited: 1mW/ cm 2 Antenna Type: External Antenna Antenna gain: 5.0dBi, R=20cm mW=10^(dBm/10) WIFI2.4G: Channel Freq. (MHz) Mode conducted power (dBm) conducted power (mW) Tune-up power (dBm) Max tune-up power (dBm) Antenna Gain (Numeric) Evaluation result (mW/cm2) Power density Limits (mW/cm2) 2412 802.11b 11.39 13.77 12±1 13 3.16 0.0126 1 2437 11.28 13.43 12±1 133.16 0.0126 1 2462 12.27 16.87 12±1 133.16 0.0126 1 2412 802.11g 10.49 11.19 10±1 11 3.16 0.0079 1 2437 9.94 9.86 10±1 113.16 0.0079 1 2462 10.82 12.08 10±1 113.16 0.0079 1 2412 802.11n (HT20) 8.88 7.73 9±110 3.16 0.0063 1 2437 9.43 8.77 9±1103.16 0.0063 1 2462 9.32 8.55 9±1103.16 0.0063 1 2422 802.11n (HT40) 10.1 10.23 10±1 11 3.16 0.0079 1 2437 8.45 7.00 9±1 10 3.16 0.0063 1 2452 8.31 6.78 9±1 10 3.16 0.0063 1 Conclusion: For the max result : 0.0126≤ 1.0 for 1g SAR, No SAR is required. Signature: Date: 2020-06-03 NAME AND TITLE (Please print or type): Alex li/ Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Report No.: S20042802805001 Version.1.3 Page 1 of 88 FCC RADIO TEST REPORT FCC ID: 2AO8RNI-3250 Product: Sentry Camera Trade Mark: Netvue Model No.: NI-3250 Family Model: NI-3251, NI-3252, NI-3253, NI-3254, NI-3255, NI-3256, NI-3257, NI-3258, NI-3259 Report No.: S20042802805001 Issue Date: 21 May. 2020 Prepared for Netvue Technologies Co.,Ltd. Room A501-502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057 Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn Report No.: S20042802805001 Version.1.3 Page 2 of 88 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES ....................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS .................................................................................... 5 2.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 11 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 11 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 12 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 13 7 TEST REQUIREMENTS .................................................................................................................................... 15 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 18 7.3 6DB BANDWIDTH ....................................................................................................................................... 27 7.4 DUTY CYCLE ............................................................................................................................................... 29 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 31 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 33 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 35 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 37 7.9 ANTENNA APPLICATION .......................................................................................................................... 38 8 TEST RESULTS ................................................................................................................................................... 39 8.1 DUTY CYCLE ............................................................................................................................................... 39 8.2 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 46 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 47 8.4 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 60 8.5 BAND EDGE ................................................................................................................................................. 67 8.6 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 76 Report No.: S20042802805001 Version.1.3 Page 3 of 88 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Netvue Technologies Co.,Ltd. Address ....................................... : Room A501-502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057 Manufacturer's Name .................. : Netvue Technologies Co.,Ltd. Address ....................................... : Room A501-502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057 Product description Product name .............................. : Sentry Camera Model and/or type reference ..... : NI-3250 Family Model ............................... : NI-3251, NI-3252, NI-3253, NI-3254, NI-3255, NI-3256, NI-3257, NI-3258, NI-3259 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURETEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described…

Text truncated - open the document above for the full version.

FCC ID: 2AO8RNI-3250 Radiated Measurement Photos FCC ID: 2AO8RNI-3250 Conducted Measurement Photos