2AP2V-DESKLAMP08Entertain LED Speaker Light (BLUETOOTH)

CONGRATULATIONS! You’ ve purchased the finest in natural lighting technology with your new OttLite ® pro duct. PRODU CT REGISTRATION FORM Pleas e complete the enclosed Product Registration Form and return it today by mail, or register online by going to: OttLite.com/warranty WARNI NG: To prevent electric shock, make sure the lamp is not plugged in until all steps are complete. NOTE: THIS UNIT IS FULLY ASSEMBLED 1. Remov e from packing, placing product flat on a steady surface. 2. Connect power adapter input (A) into connector (B) in the rear-bottom of the speaker base. 3.Plug t he power adapter (C) into a standard household 120V AC outlet. Note: Only use with the supplied power adapter to avoid damage or fire. 4. To tur n on lamp tap on top o f shade. 5. To adj ust brightness, tap agai n. The lamp has three levels of brightness. 6. To cha nge color temprature of the light, touch and hold . The la mp has three color modes. 7. By hol ding the fabric covered base you can lift the lamp shade off and use it as a battery powered light. Note: The lamp is battery powered and needs to be charged on the speaker base. The lamp has an indicator that illuminates when the lamp is charging. Bluetooth ® Spea ker Operation 1. To turn on the Bluetooth ® spea ker, press and hold unti l blue light starts flashing. 2. On your d evice, open the Bluetooth ® app o r Bluetooth ® sett ings. Locate and select the device “PL-0246” to pair the speaker to your device. A solid blue light indicates the speaker is connected. A flashing light indicates it is not connected. 3. Volume up/down, play/pause, and skip forward/backward can be controlled from either your device or the speaker itself. 4. To ski p to forward, press and hold the volume up ( + ) butt on. To skip backward, press and hold the volume down ( - ) butt on. 5. To turn off the Bluetooth ® spea ker, press and hold unti l the blue light starts flashing and the Bluetooth ® spea ker will turn off. Note: The speaker must be plugged into a household outlet to play music and/or to recharge the lamp. SAF ET Y WARNING: TO REDU CE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS 1. Neve r use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord. 2. Do not alter the plug. 3 . The la mp head included with this unit cannot be replaced by the consumer. 4. INDOOR USE ONLY. NOTE: The important safety instructions appearing in this instruction sheet are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product . CAUT ION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY. CAUT ION! THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED. CAUTION: Any change or modification to product not expressly recognized by OttLite Technologies voids OttLite’s responsibility for proper function of product. FCC PART 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005 (B)/NMB-005 (B) POWER ADAPTER SPECIFICATION: Input: AC 100-240V, 50/60 Hz, 0.6A Output: 5V DC, 2.0A with a Male DC Plug Output power: 3W (lamp) + 3W (speaker) Speaker: 1.5 inch (40mm), 4 ohms Bluetooth ® The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by OttLite ® is under license. ISED WARNING This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet dispositif ne peut causer des interférences; et (2) Cet…

Text truncated - open the document above for the full version.

Date: 2020-04-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Div ision 7435 Oakland Mills Road Columbia, MD 21046 Attestation Lett er To Whom It May Concern, The chip AC6928B installed in our product Entertain LED Speaker Light (BLUETOOTH) (model name: PL-0246, PL-0244, PL-0246-IJ, PL-0244-IJ, FCC ID: 2AP2V-DESKLAMP08), which only supports Bluetooth(GFSK, π/4-DQPSK) and BLE 1MHz functions. Please contact me if there is need for any additional clarification or information. Best Regards, Company: Shaoxing Prolux Lighting Co., Ltd Add: Ludong Industrial Zone, BaiGuan Street, ShangYu District, Shaoxing City, Zhejiang Provin ce, 312000 China Tel: (86) 575-81222966 Fax: (86) 575-81269588 E-mail: [email protected] Signature: Typed or Printed Name: Lv Zheng Title: QA Manager

Compan y: Shaoxing Prolux Lighting Co., Ltd Add: Ludong Industrial Zone, BaiGuan Street, ShangYu District, Shaoxing City, Zhejiang Province, 312000 China Tel: (86) 575-81222966 Fax: (86) 575-81269588 E-mail: [email protected] FCC Confidential Authorization Date:2020-04-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AP2V-DESKLAMP08 To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shaoxing Prolux Lighting Co., Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Typed or Printed Name: Lv Zheng Title: QA Manager

Company: Shaoxing Prolux Lighting Co., Ltd Add: Ludong Industrial Zone, BaiGuan Street, ShangYu District, Shaoxing City, Zhejiang Province, 312000 China Tel: (86) 575-81222966 Fax: (86) 575-81269588 E-mail: [email protected] DECLARATION Dear Sir or Madam: We, Shaoxing Prolux Lighting Co., Ltd hereby declare that product name: Entertain LED Speaker Light (BLUETOOTH) (model name: PL-0246, PL-0244, PL-0246-IJ, PL-0244-IJ. FCC ID: 2AP2V-DESKLAMP08). These models are electrically identical with the same electromagnetic emissions and electromagnetic compatibility characteristics. PL- 0246 and PL-0244 have been tested by BACL. The differences of them are as follows: 1. The difference between PL-0246-IJ and PL-0246 is only model name. The difference between PL-0244 and PL-0244-IJ is only model name. Please contact me if there is need for any additional clarification or information. Best Regards, Signature: Print Name: Lv Zheng Title: QA Manager FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 PL-0246, PL-0246-IJ PL-0244, PL-0244-IJ 2 . 3. The differences between PL-0246 and PL-0244 are model name and appearance.

QA-FR-170-B Company: Shaoxing Prolux Lighting Co., Ltd Add: Ludong Industrial Zone, BaiGuan Street, ShangYu District, Shaoxing City, Zhejiang Province, 312000 China Tel: (86) 575-81222966 Fax: (86) 575-81269588 E-mail: [email protected] FCC Authorization Date: 2020-04-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Shaoxing Prolux Lighting Co., Ltd, the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersig ned, hereby certify that we are not subject to a denial of federal b enefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Typed or Printed Name: Lv Zheng Title: QA Manager

EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS Model: PL-0246, PL-0246-IJ Model: PL-0244, PL-0244-IJ

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS Model: PL-0246, PL-0246-IJ, PL-0246-IJ, PL-0244-IJ (BT speaker) Antenna Model: PL-0246, PL-0246-IJ(Lamp) Model: PL-0244, PL-0244-IJ(Lamp)

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Shaoxing Prolux Lighting Co., Ltd Ludong Industrial Zone, BaiGuan Street, ShangYu District, Shaoxing City, Zhejiang Province, 312000 China FCC ID: 2AP2V-DESKLAMP08 Report Type: Original Report Product Type: Entertain LED Speaker Light (BLUETOOTH) Test Engineer: Lee Li Re port Number: RSHB200417001-00C Re port Date: 2020-06-04 Reviewed B y: Oscar Ye EMC Manager Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHB200417001-00C FCC Part 15.247 Page 2 of 41 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 8 EXTERNAL I/O CABLE .................................................................................................................................................. 8 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 TEST EQUIPMENT LIST ......................................................................................................................................... 11 FCC §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................................................ 12 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 13 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................................... 15 FACTOR & OVER LIMIT CALCULATION ...................................................................................................................... 15 TEST RESULTS SUMMARY .......................................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 15 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ............................................................................. 20 APPLICABLE STANDARD ............................................................................................................................................ 20 EUT SETUP ................................................................................................................................................................ 20 EMI TEST RECEIVER SETUP ...…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Model: PL-0246 Conducted Emissions (Front View) Conducted Emissions (Side View) Radiated Emissions (Below 1GHz) Radiated Emissions (Above 1GHz) Model: PL-0244 Conducted Emissions (Front View) Conducted Emissions (Side View) Radiated Emissions (Below 1GHz)