2AP2V-DESKLAMP15LED DESK LAMP WITH WIRELESS CHARGING

CONGRATULATIONS! You’ve purchased the finest in natural lighting technology with your new OttLite ® product. PRODUCT REGISTRATION FORM Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: OttLite.com/warranty WARNING: To prevent electric shock, make sure the lamp is not plugged in until all steps are complete. NOTE: THIS UNIT IS FULLY ASSEMBLED 1. Remove lamp from packing, placing lamp body base (A) flat on a steady surface. 2. Connect power adapter input (F) into connector (G) in the rear-bottom of the lamp. 3. Plug the power adapter (H) into a standard household 120V AC outlet. NOTE: Only use with the supplied power adapter to avoid damage or fire. 4. Turn the lamp ON & OFF using power switch (B) located on the top of the lamp head. Power switch (B) is a “touch” switch that controls the dimmer function for 3 levels of brightness. 5. To power LED settings, slightly touch the switch to achieve the following: • turn lamp “ON” to low brightness; touch the switch “once”; • for medium brightness; touch the switch “twice”; • for high brightness level; touch the switch “three-times”; • to turn lamp “OFF”; touch the switch “four-times”. 6. This lamp provides three color modes. To adjust lighting color mode slightly “press and hold” switch (B) for two seconds to switch light color temperature mode; 5000K, 2700K, 3500K. 7. Wireless charger (J) is located in the center of base (A). See Wireless Charging Instructions section for details. 8. To position the shade simply bend the flex-neck (C) as needed to point the light. Please hold the lamp base (A) while adjusting the lamp. WIRELESS CHARGING INSTRUCTIONS To wirelessly charge a device, perform the following: • Place the device, which supports wireless charging, face up on the middle of the wireless charging icon (J). • When the device is centered on the wireless charging icon (J) a solid BLUE light (K) will come on noting charging mode active. Your device should show charging is taking place. • Check the charge level on your device periodically to determine when device is fully charged. CAUTION! Device may become warm during charging. This is normal and part of the process. Charging times vary by device. SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS 1. Turn lamp off and WAIT UNTIL LAMP HEAD (E) IS COOL before handling. 2. The LED panel (D) might get hot after several hours of continuous use DO NOT place your hands directly on LED light panel. 3. Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord. 4. Do not alter the plug. 5. The lamp head included with this unit cannot be replaced by the consumer. 6. INDOOR USE ONLY. NOTE: The important safety instructions appearing in this instruction sheet are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product. CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY. CAUTION! THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED. CAUTION: Any change or modification to product not expressly recognized by OttLite voids OttLite’s responsibility for proper function of product. FCC PART 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF RADIATION EXPOSURE STATEMENT CAUTION: The FCC certification of this devic refers to RF exposure testing performed in typical operating conditions,where a person is no closer than 20 centimeters from the device POWER ADAPTER SPECIFICATION: Input: AC 100-240V, 50/60 Hz, 0.6A Output: 13V DC, 1.2A with a Male DC Plug WIRELESS CHARGER SPECIFICATION: Output: 5V, 1A or 5 watts ENGLISH Twist LED Desk Lamp with Wireless Charging Twist LED Desk Lamp with Wireless Charging CSNWC51W PL-0370Q INS240813 REV082824 C H G F K B E A D J surface at all times, except for non-repetitive patterns with transiennt time intercals in the order of a second. Only in the stated connditions,the device is shown to fully comply with the FCC RF Exposure requirements of KDB 4474 98. FÉLICITATIONS! Vous avez fait l’achat de la meilleure technologie en éclairage naturel avec votre produit OttLite ® FORMULAIRE D’ENREGISTREMENT DE PRODUIT Compléter le formula…

Text truncated - open the document above for the full version.

- Shaoxing Prolux Lighting Co., Ltd - Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/29/2024 U.S. Agent Designation Shaoxing Prolux Lighting Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AP2V-DESKLAMP15): Name and company of U.S. agent: Physical U.S. address of agent: FRN of U.S. agent: OttLite Technologies Inc 1715 N Westshore Blvd, STE 950, Tampa, FL, 33607,USA 0025699091 Email address of U.S. agent: [email protected] OttLite Technologies Inc acknowledges their obligation to accept service of process on behalf of Shaoxing Prolux Lighting Co., Ltd Shaoxing Prolux Lighting Co., Ltd with the FRN 0027584770 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Signature Lv Zheng Joseph Custode QA Manager Senior Quality Control Engineer OttLite Technologies Inc Shaoxing Prolux Lighting Co., Ltd

Page 1 of 4 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. EUT Constructional Details External EUT Photo Photo 1 Photo 2 Page 2 of 4 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 7 Photo 8 ---The End---

Label Size: L50mm * W30mm 1. The label is silk-screen on the sample L W

Page 1 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. EUT Constructional Details Internal EUT Photo Photo 1 Photo 2 Page 2 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 3 Photo 4 Page 3 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 5 Photo 6 Phone Coil Page 4 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 7 Photo 8 Page 5 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 9 Photo 10 Page 6 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 11 Photo 12 Page 7 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 13 Photo 14 Page 8 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 15 Photo 16 Page 9 of 9 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 17 Photo 18 ------End------

Page 1 of 12 Report No.: AiTSZ-240902005W2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : LED DESK LAMP WITH WIRELESS CHARGING Brand Name : N/A Model : PL-0370Q Series Model : N/A FCC ID : 2AP2V-DESKLAMP15 Applicant : Shaoxing Prolux Lighting Co., Ltd Address : Ludong Industrial Zone,BaiGuan Street,ShangYu District,Shaoxing City,Zhejiang Province,China Manufacturer : Shaoxing Prolux Lighting Co., Ltd Address : Ludong Industrial Zone,BaiGuan Street,ShangYu District,Shaoxing City,Zhejiang Province,China Standard(s) : FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt : Sept.02, 2024 Date of Test : Sept.02, 2024 ~ Sept.11, 2024 Issued Date : Sept.11, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Leon.yi Sean She Page 2 of 12 Report No.: AiTSZ-240902005W2 Report Revise Record Report Version Issued Date Notes M1 Sept.11, 2024 Initial Release Page 3 of 12 Report No.: AiTSZ-240902005W2 Contents 1 GENGENERAL INFORMATION ................................................................................................................................... 4 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 4 1.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2.1 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 6 2.2 SPECIAL ACCESSORIES ................................................................................................................................................... 6 2.3 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 6 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 7 3.1 APPLICABLE STANDARD .................................................................................................................................................. 7 3.2 LIMIT ......................................................................................................................................................................... 7 3.3 TEST SETUP ................................................................................................................................................................. 7 3.4 MEASUREMENT PROCEDURE .......................................................................................................................................... 8 3.5 TEST RESULT OF E AND H FIELD STRENGTH ........................................................................................................................ 8 3.6 EQUIPMENT APPROVAL CONSIDERATIONS ......................................................................................................................... 9 3.7 CONCLUSION ............................................................................................................................................................... 9 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 10 Page 4 of 12 Report No.: AiTSZ-240902005W2 1 GENGENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.2 General Description of EUT Product Name: LED DESK LAMP WITH WIRELESS CHARGING Model/Type reference: PL-0370Q Power Supply: DC 13V from adapter Adapter information: Model:RSS1002-156130-W2-P Input: 100-240V, 50/60 Hz, 0.6A Output: DC 13V⎓1.2A Hardware version: N/A Software version: V1.0 Sample(s) Status: AiTSZ-240902005-1(Normal sample) AiTSZ-240902005-2(Engineer sample) Wireless Charger(5W): Operation frequency: 113kHz-205kHz Modulation Technology: ASK Antenna Type: Loop coil Antenna Antenna gain: 0dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 5 of 12 Report No.: AiTSZ-240902005W2 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai …

Text truncated - open the document above for the full version.

Page 1 of 20 Report No.: AiTSZ-240902005W1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : LED DESK LAMP WITH WIRELESS CHARGING Brand Name : N/A Model : PL-0370Q Series Model : N/A FCC ID : 2AP2V-DESKLAMP15 Applicant : Shaoxing Prolux Lighting Co., Ltd Address : Ludong Industrial Zone,BaiGuan Street,ShangYu District,Shaoxing City,Zhejiang Province,China Manufacturer : Shaoxing Prolux Lighting Co., Ltd Address : Ludong Industrial Zone,BaiGuan Street,ShangYu District,Shaoxing City,Zhejiang Province,China Standard(s) : FCC CFR Title 47 Part 15 Subpart C Date of Receipt : Sept.02, 2024 Date of Test : Sept.02, 2024 ~ Sept.11, 2024 Issued Date : Sept.11, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Leon.yi Sean She Page 2 of 20 Report No.: AiTSZ-240902005W1 Report Revise Record Report Version Issued Date Notes M1 Sept.11, 2024 Initial Release Page 3 of 20 Report No.: AiTSZ-240902005W1 Contents 1 TEST SUMMARY ....................................................................................................................................................... 4 1.1 TEST STANDARDS.......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENGENERAL INFORMATION ................................................................................................................................... 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 7 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 7 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 9 3.1 CONDUCTED EMISSIONS TEST ......................................................................................................................................... 9 3.2 RADIATED EMISSIONS .................................................................................................................................................. 12 3.3 20DB BANDWIDTH ..................................................................................................................................................... 18 3.4 ANTENNA REQUIREMENT ............................................................................................................................................. 19 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 20 5 EXTERNAL PHOTOGRAPHS OF EUT ......................................................................................................................... 20 6 INTERNAL PHOTOGRAPHS OF EUT .......................................................................................................................... 20 Page 4 of 20 Report No.: AiTSZ-240902005W1 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.207,15.209, 15.215(c) ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices 1.2 Test Summary Test Item Section in CFR 47 Test Result Electric Field Radiated Emissions FCC Part 15 C (Section15.209) PASS 20dB Bandwidth/99% Bandwidth FCC Part 15 C (Section15.215(c)) PASS AC Power Line Conducted Emission FCC Part 15 C (Section15.207) PASS Antenna Requirement FCC Part 15 C (Section15.203 PASS Page 5 of 20 Report No.: AiTSZ-240902005W1 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certifi…

Text truncated - open the document above for the full version.

Specification 规格内容 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 1.DIMENSIONS(外形尺寸):(Unit APPROVEDBYCHECKEDBYPREPAREDBYDATEPAGE 承认审查制作日期页码 谢志虎 杨敏 2017/2/272of4 Specification 规格内容 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 5.WINDINGDETAILS(绕线详细说明): Wdy.No. StartFinishTurnsWireDia. Wdg.TypeWdg. Turns/Layer Spread/CloseDirection 绕组开始结束圈数线径层数/每层圈数 绕线方法疏/密绕 绕线方向 SF100.08*105 单层密绕 逆时针 1/10TS 6.ELECTRICALCHARACTERISTICS(电气特性): PARAMETERSUNITLIMTI inductancels@100KHz/1VuH 6.3±10％ Q@100KHz/1V77 DCRΩ0.05 APPROVEDBYCHECKEDBYPREPAREDBYDATEPAGE 承认审查制作日期页码 谢志虎杨敏 2017/2/273of4 Single layer close wound anticlockwise

Page 1 of 2 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Test Setup Photo DCD Conduction Radiation (9KHz-30MHz) Page 2 of 2 FCC ID: 2AP2V-DESKLAMP15 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Radiation (30MHz-1000MHz) ------End------