2AP2V-DESKLAMP12LED DESK LAMP WITH WIRELESS CHARGING

CONGRATULATIONS! You’ve purchased the finest in natural lighting technology with your new OttLite ® product. PRODUCT REGISTRATION FORM Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: OttLite.com/warranty WARNING: To prevent electric shock, make sure the lamp is not plugged in until all steps are complete. NOTE: THIS UNIT IS FULLY ASSEMBLED 1. Remove lamp from packing, placing lamp body base (A) flat on a steady surface. 2. Connect power adapter input (B) into connector (C) in the rear-bottom of the lamp. 3. Plug the power adapter (D) into a standard household 120V AC outlet. Note: Only use with the supplied power adapter to avoid damage or fire. 4. Turn the lamp ON/OFF by using power switch (E) located on top of base (A). 5. To power LED settings, slightly touch switch (E) to achieve the following: • Turn lamp “ON” to 1st brightness setting; touch the switch “once”; • for 2nd brightness setting; touch the switch “two-times”; • for 3rd brightness setting; touch the switch “three-times”; • for 4th brightness setting; touch the switch “four-times”; • to turn lamp “OFF”; touch the switch “five-times”. 6. This lamp provides three color modes. To adjust lighting color mode slightly touch switch (M) to switch light color temperature mode; 5000K, 2700K, 4000K. 7. To reposition the light, hold the lamp base (A) or neck (G) steady and move shade (H) up or down depending on needed adjustment. DO NOT FORCE the shade or lamp outside allowable adjustable range as excessive adjustment may cause damage. WIRELESS CHARGING INSTRUCTIONS: Wireless charging requires a Qi-certified device. To determine if your device is Qi-certified, please visit the Wireless Power Consortium website. To wirelessly charge a device, perform the following: • Place the device, which supports Qi wireless charging standard, face up on the middle of the Qi wireless charging icon (F). • When the device is centered on the Qi wireless charging area (F), a solid BLUE light (J) will come on noting charging mode active. Your device should show charging is taking place. • Check charge level on your device periodically to determine when device is fully charged. NOTE: Product DOES NOT provide any indication of when device is fully charged. CAUTION! Device may become warm during charging. This is normal and part of the process. Charging times vary by device. SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS 1. Turn lamp off and WAIT UNTIL LAMP HEAD IS COOL before handling. 2. The LED panel (K) might get hot after several hours of continuous use DO NOT place your hands directly on LED light panel. 3. Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord. 4. Do not alter the plug. 5. The lamp head included with this unit cannot be replaced by the consumer. 6. INDOOR USE ONLY. NOTE: The important safety instructions appearing in this instruction sheet are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product. CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY. CAUTION! THE LIGHT SOURCE CONTAINED IN THIS LUMINAIRE SHALL ONLY BE REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON. CAUTION: Any change or modification to product not expressly recognized by OttLite Technologies voids OttLite’s responsibility for proper function of product. FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IC WARNING This device contains licence-exempt transmitter(s)/receiver that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. RF EXPOSURE CONSIDERATIONS: This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102…

Text truncated - open the document above for the full version.

Shaoxing Prolux Lighting Co., Ltd Ludong Industrial Zone, BaiGuan Street, Shang Yu District, Shaoxing City, Zhejiang Province, China Date: 2023-03-31 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2AP2V-DESKLAMP12 To Whom It May Concern: Shaoxing Prolux Lighting Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory [Lv Zheng, QA Manager]

Shaoxing Prolux Lighting Co., Ltd Ludong Industrial Zone, BaiGuan Street, Shang Yu District, Shaoxing City, Zhejiang Province, China Date: 2023-03-31 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2AP2V-DESKLAMP12 To Whom It May Concern: Shaoxing Prolux Lighting Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signatory [Lv Zheng, QA Manager]

Shaoxing Prolux Lighting Co., Ltd Ludong Industrial Zone, BaiGuan Street, Shang Yu District, Shaoxing City, Zhejiang Province, China Date: 2023-04-27 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: 2AP2V-DESKLAMP12 Shaoxing Prolux Lighting Co., Ltd certifies that, as of the date of the filing of the application, Ottlite Technologies Inc is our designated U.S. agent for service of process for the above referenced FCC ID. Shaoxing Prolux Lighting Co., Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Ottlite Technologies Inc accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Ottlite Technologies Inc FRN: 0025699091 Address: 1715 N Westshore Blvd, Suite 950, Tampa, FL, 33607, USA Contact Person: Joseph Custode Tel.: 813-621-0058 Email: [email protected] Sincerely, Signed on behalf of Shaoxing Prolux Lighting Co., Ltd Signed on behalf of Ottlite Technologies Inc Name: Lv Zheng Name: Joseph Custode Title: QA Manager Title: Senior Quality Control Engineer Date: 2023-04-27 Date: 2023-03-31

Shaoxing Prolux Lighting Co., Ltd Ludong Industrial Zone, BaiGuan Street, Shang Yu District, Shaoxing City, Zhejiang Province, China Date: 2023-03-31 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2AP2V-DESKLAMP12 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely.
Block Diagram  Tune-Up Information
Operational Description  Security Information
Schematics  Software Defined Radio (SDR) Information  Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);  External Photos  Test Setup Photos  Internal Photos  User Manual  For 45 days, pursuant to Public Notice DA 04-1705. or  For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [Lv Zheng, QA Manager]

Shaoxing Prolux Lighting Co., Ltd Ludong Industrial Zone, BaiGuan Street, Shang Yu District, Shaoxing City, Zhejiang Province, China Date: 2023-03-31 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2AP2V-DESKLAMP12 POWER OF ATTORNEY To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shaoxing Prolux Lighting Co., Ltd are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory [Lv Zheng, QA Manager]

ReferenceNo.:WTN23X02025053W001/002Page2of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT2-EUTEXTERNALPHOTOGRAPHS ModelNo.:PL-0360Q EUTView1 EUTView2 ReferenceNo.:WTN23X02025053W001/002Page3of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView3 EUTView4 ReferenceNo.:WTN23X02025053W001/002Page4of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView5 EUTView6 ReferenceNo.:WTN23X02025053W001/002Page5of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView7 ModelNo.:PL-0372Q EUTView1 ReferenceNo.:WTN23X02025053W001/002Page6of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView2 EUTView3 ReferenceNo.:WTN23X02025053W001/002Page7of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView4 EUTView5 ReferenceNo.:WTN23X02025053W001/002Page8of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView6 EUTView7

ReferenceNo.:WTN23X02025053W001/002Page1of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT1-PRODUCTLABELING ProposedFCCIDLabelFormat Specifications:Thelabelshallbesecurelyaffixedtoapermanentlyattachedpartofthedevice,inalocation whereitisvisibleoreasilyaccessibletotheuser,andshallnotbereadilydetachable.Thelabelshallbe sufficientlydurabletoremainfullylegibleandintactonthedeviceinallnormalconditionsofusethroughout thedevice’sexpectedlifetime. ProposedLabelLocationonEUT FCCIDLabel Location

ReferenceNo.:WTN23X02025053W001/002Page9of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT3-EUTINTERNALPHOTOGRAPHS ModelNo.:PL-0360Q EUTHousingand BoardView1 Solder Board-Component View1 ReferenceNo.:WTN23X02025053W001/002Page10of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-Component View2 Solder Board-Component View3 ReferenceNo.:WTN23X02025053W001/002Page11of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-Component View4 Solder Board-Component View5 ReferenceNo.:WTN23X02025053W001/002Page12of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-Component View6 ReferenceNo.:WTN23X02025053W001/002Page13of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn ModelNo.:PL-0372Q EUTHousingand BoardView1 Solder Board-Component View1 ReferenceNo.:WTN23X02025053W001/002Page14of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-Component View2 Solder Board-Component View3 ReferenceNo.:WTN23X02025053W001/002Page15of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-Component View4 Solder Board-Component View5 ReferenceNo.:WTN23X02025053W001/002Page16of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-Component View6 AntennaView

WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 1 of 13 TESTREPORT ReferenceNo.......................:WTN23X02025053W002 FCCID....................................:2AP2V-DESKLAMP12 Applicant...............................:ShaoxingProluxLightingCo.,Ltd Address.................................: LudongIndustrialZone,BaiGuanStreet,ShangYuDistrict,Shaoxing City,ZhejiangProvince,China Manufacturer........................:ThesameasApplicant Address.................................:ThesameasApplicant ProductName......................:LEDDESKLAMPWITHWIRELESSCHARGING ModelNo...............................:PL-0360Q Standards..............................:KDB680106D01V03 DateofReceiptsample.....:2023-02-20 DateofTest...........................:2023-02-20to2023-03-30 DateofIssue........................:2023-03-30 TestReportFormNo.......... : WTX_KDB680106D01V03W TestResult............................:Pass Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbe reproduced,exceptinfull,withoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithout specificstampoftestinstituteandthesignaturesofapprover. PreparedBy: WaltekTestingGroup(Shenzhen)Co.,Ltd. Address:1/F.,Room101,Building1,HongweiIndustrialPark,Liuxian2ndRoad, Block70Bao'anDistrict,Shenzhen,Guangdong,China Tel.:+86-755-33663308Fax.:+86-755-33663309Email:[email protected] Testedby:Approvedby: JackHuangSilinChen ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 2 of 13 TABLEOFCONTENTS 1.GENERALINFORMATION...................................................................................................................................4 1.1PRODUCTDESCRIPTIONFOREQUIPMENTUNDERTEST(EUT).............................................................................4 1.2AUXILIARYEQUIPMENTLISTANDDETAILS..........................................................................................................5 1.3TESTEQUIPMENTLISTANDDETAILS....................................................................................................................6 2.RFEXPOSURETESTREPORT.............................................................................................................................7 2.1STANDARDAPPLICABLE.........................................................................................................................................7 2.2TESTCONDITIONS..................................................................................................................................................7 2.3TESTPROCEDURE...................................................................................................................................................8 2.4TESTRESULT..........................................................................................................................................................9 2.5MEASUREMENTUNCERTAINTY............................................................................................................................11 2.6TESTPHOTOS........................................................................................................................................................12 APPENDIXPHOTOGRAPHS...................................................................................................................................13 ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 3 of 13 Reportversion VersionNo.DateofissueDescription Rev.002023-03-30Original /// ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 4 of 13 1.GENERALINFORMATION 1.1ProductDescriptionforEquipmentUnderTest(EUT) GeneralDescriptionofEUT ProductName:LEDDESKLAMPWITHWIRELESSCHARGING TradeName:/ ModelNo.:PL-0360Q AddingModel(s):PL-0372Q SoftwareVersion:Version062021.06.16 HardwareVersion:WTM-H005 Note:Thetestdataisgatheredfromaproductionsample,providedbythemanufacturer.The appearanceofothersmodelslistedinthereportisdifferentfrommain-testmodelPL-0360Q,butthe circuitandtheelectronicconstructiondonotchange,declaredbythemanufacturer. TechnicalCharacteristicsofEUT FrequencyRange:112~205KHz ModulationType:/ AntennaType:CoilAntenna AntennaGain:0dBi RatedVoltage:13.0V RatedCurrent:1.2A PowerAdapter: MODEL:RSS1002-156130-W2-P INPUT:AC100-240V~50/60Hz0.6A OUTPUT:DC13.0V1.2A RatedPower:5WMax ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 5 of 13 1.2AuxiliaryEquipmentListandDetails AuxiliaryEquipmentListandDetails DescriptionManufacturerModelSerialNumber SmartphoneAppleIPhone12ProMax/ WirelessCharging Load YBZ YBZwirelesscharging tester / EUTCableListandDetails DescriptionManufacturerModelSerialNumber DCCable1.88UnshieldedWithoutFerrite ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 6 of 13 1.3TestEquipmentListandDetails Description Manufacturer ModelSerialNo.CalDateDueDate ELECTRICANDMAGNETIC FIELDANALYZER NardaEHP-200AC180ZX102262021-05-202024-05-19 ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 7 of 13 2.RFExposureTestReport 2.1StandardApplicable Accordingto§1.1310systemoperatingundertheprovisionsofthissectionshallbeoperatinginamanner thatthepublicisnotexposedtoradiofrequencyenergylevelinexcesslimitformaximumpermissible exposure. 2.2TestConditions TestModeDescriptionRemark TM1WirelessCharging Connecttotheadapter; AC120V/60Hzforadapter;Wireless charging:5W Note:TheEUTwastestedwithemptyload,halfload,andfullload,andrecordedtheworstmode(fullload) datainthereport. MeasurementDistance:15cmand20cm ReferenceNo.:WTN23X02025053W002 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 8 of 13 2.3TestProcedure a.Themeasurementprobewasplacedattestdistance(15cmforA,B,C,D,Fand20cmforE),whichis betweentheedgeofthechargerandtheedgeofprobe. b.Thehighestemissionlevelwa…

Text truncated - open the document above for the full version.

:mm xie zhihu Yang min

WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 1 of 24 TESTREPORT ReferenceNo.......................:WTN23X02025053W001 FCCID....................................:2AP2V-DESKLAMP12 Applicant...............................:ShaoxingProluxLightingCo.,Ltd Address.................................: LudongIndustrialZone,BaiGuanStreet,ShangYuDistrict,Shaoxing City,ZhejiangProvince,China Manufacturer........................:ThesameasApplicant Address.................................:ThesameasApplicant ProductName......................:LEDDESKLAMPWITHWIRELESSCHARGING ModelNo...............................:PL-0360Q Standards..............................:FCCPart15C DateofReceiptsample.....:2023-02-20 DateofTest...........................:2023-02-20to2023-03-30 DateofIssue........................:2023-03-30 TestReportFormNo.......... : WTX_Part15CW TestResult............................:Pass Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbe reproduced,exceptinfull,withoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithout specificstampoftestinstituteandthesignaturesofcompilerandapprover. PreparedBy: WaltekTestingGroup(Shenzhen)Co.,Ltd. Address:1/F.,Room101,Building1,HongweiIndustrialPark,Liuxian2ndRoad, Block70Bao'anDistrict,Shenzhen,Guangdong,China Tel.:+86-755-33663308Fax.:+86-755-33663309Email:[email protected] Testedby:Approvedby: JackHuangSilinChen ReferenceNo.:WTN23X02025053W001 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 2 of 24 ABLEOFCONTENTS 1.GENERALINFORMATION........................................................................................................................4 1.1PRODUCTDESCRIPTIONFOREQUIPMENTUNDERTEST(EUT).................................................................4 1.2TESTSTANDARDS...................................................................................................................................5 1.3TESTMETHODOLOGY..............................................................................................................................5 1.4TESTFACILITY.........................................................................................................................................5 1.5EUTSETUPANDOPERATIONMODE........................................................................................................6 1.6MEASUREMENTUNCERTAINTY.................................................................................................................7 1.7TESTEQUIPMENTLISTANDDETAILS........................................................................................................8 2.SUMMARYOFTESTRESULTS................................................................................................................9 3.RFEXPOSURE.........................................................................................................................................10 3.1STANDARDAPPLICABLE.........................................................................................................................10 3.2TESTRESULT........................................................................................................................................10 4.ANTENNAREQUIREMENT.....................................................................................................................11 4.1STANDARDAPPLICABLE.........................................................................................................................11 4.2EVALUATIONINFORMATION....................................................................................................................11 5.CONDUCTEDEMISSIONS......................................................................................................................12 5.1TESTPROCEDURE.................................................................................................................................12 5.2BASICTESTSETUPBLOCKDIAGRAM.....................................................................................................12 5.3ENVIRONMENTALCONDITIONS...............................................................................................................12 5.4TESTRECEIVERSETUP.........................................................................................................................13 5.5SUMMARYOFTESTRESULTS/PLOTS.....................................................................................................13 6.FIELDSTRENGTHOFSPURIOUSEMISSIONS....................................................................................16 6.1STANDARDAPPLICABLE.........................................................................................................................16 6.2TESTPROCEDURE.................................................................................................................................16 6.3CORRECTEDAMPLITUDE&MARGINCALCULATION.................................................................................17 6.4ENVIRONMENTALCONDITIONS...............................................................................................................18 6.REFERENCEMEASUREMENTATOPENFIELDSITE.....................................................................................18 6.5SUMMARYOFTESTRESULTS/PLOTS.....................................................................................................18 7.20DBEMISSIONBANDWIDTH...............................................................................................................22 7.1STANDARDAPPLICABLE.........................................................................................................................22 7.2TESTPROCEDURE.................................................................................................................................22 7.3ENVIRONMENTALCONDITIONS....................................................................................…

Text truncated - open the document above for the full version.

ReferenceNo.:WTN23X02025053W001/002Page17of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT4-TESTSETUPPHOTOGRAPHS ConductedEmission TestSetup RadiationEmission View(Below30MHz) ReferenceNo.:WTN23X02025053W001/002Page18of18 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn RadiationEmission View(30MHzto1GHz) *****ENDOFREPORT*****