2APA9-CMSXJ33AIMILAB Video Doorbell

上海创米科技有限公司 033 V2.2 V1.0创建图档 V1.1加尺寸、标颜色等 20211117 周晓玲 选择正确的 方向图标拖 动到图纸里 纹理方向 色相正确、印迹牢固、 套印准确、各色套印 不露杂色，套印误差≤ 0.1mm 模切走位≤±0.5mm （示例具体以实物为准） 修改内容版本 修 改 记 录 材质：太空梭105g无光铜亚粉 尺寸：105 148mm 风琴折 Pantone Cool Gray 11C、C:0 M:20 Y:100 K:0 CONTENTS English01-10 00-00Deutsche 00-00Español 00-00Italiano 00-00Français 00-00Pусский All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. WEEE Information Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB EC4 is in compliance withDirective 2014/53/EU. Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB Smart Hub is in compliance with Directive 2014/53/EU. EU Declaration of Conformity FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Specifications Safety statement Name: IMILAB Video Doorbell Model: CMSXJ33A Resolution: 2560x1440 Aperture: F1.6 Item Dimensions: 60 x 33 x 142 mm Power Input: 5 V 2 A Operating Temperature: -20 °C ~ 50 °C FCC ID：XXXXXXXX Name: IMILAB Doorbell Hub Model: CMWG33B Power Input: 100-240V~，50/60hz，0.3A MAX Item Dimensions: 57 x 34 x 105mm Operating Temperature: -10 °C ~ 45 °C Expandable Memory: MicroSD card(up to 64 GB) Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz FCC ID：XXXXXXXX Product overview Hub Status LED MicroSD Card Slot Speaker Reset Button Power Explanations for LEDS Hub LED Status Blinking blue Blue and orange flashes alternately Solid blue Waiting for connection Network connection is successful / connected Network connection is failure Status Solid orangeA firmware update is in progress Press and hold the button for 10 seconds, until the LED blinks blue During the reset process, the hub will restart Blinking orangeWaiting for doorbell to connect The suitable operationg temperature range for this product is between -20°C~50°C. Don't use the product in an environment with temperatures above or below the specified range. When charging, the operating tempreture range for this product is between 0°C~ 45°C. Don't charge the product in an environment with temperatures above or below the specified range. Using the product in a low tempreture environment or charging status will affect its standby time. The actual standby time is related to the user's environment and habbit. To improve the product's performance, please do not place the video doorbell lens facing or next to a reflective surface, such as glass windows/doors and white walls, which will cause the image to appear overly bright inareas close to the video doorbell and darker in areas further away, or cause the video doorbell to produce white images. Please install the product in areas with Wi-Fi reception, and try to place the device where the Wi-Fi signal is strong. In addition, please keep the security video doorbell away from metal structures, microwave ovens, or other locations where signal strength may be impacted. Don't replace the battery in video doorbell yourself—if not properly replaced, there is a danger of explosion. Battery (battery pack or batteries) must not be exposed to sunlight, fire, or similar overheating conditions. This product is a low power consumption video doorbell with battery built-in. Don't use Real-Time Monitoring feature for long time when charging, in order to avoid battery life loss. Do not use the device in the environment at too high or too low temperature, never expose the device under strong sunshine or too wet enviroment. Precautions EN-02 IMILAB Video Doorbell Set User Manual Read this manual carefully before use, and retain it for future reference. ENDEESFRITR…

Text truncated - open the document above for the full version.

Shanghai Imilab Technology Co., Ltd. Agent Authorization Company: Shanghai Imilab Technology Co., Ltd. Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China Product Name: IMILAB Video Doorbell Model Number(s): CMSXJ33A Product Description: IMILAB Video Doorbell We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-04-08 Name: wang hesong Company: Shanghai Imilab Technology Co., Ltd.

ShanghaiImilabTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2022-04-08 Subject;RequestforConfidentiality FCCID:2APA9-CMSXJ33A ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely ShanghaiImilabTechnologyCo.,Ltd. Contactperson:wanghesong

Report No.: AGC05877220306AP03 Page 1 of 4 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC05877220306AP03 Page 2 of 4 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC05877220306AP03 Page 3 of 4 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC05877220306AP03 Page 4 of 4 PORT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 30mm&80mm FCC ID: 2APA9-CMSXJ33A

Report No.: AGC05877220306AP03 Page 1 of 7 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC05877220306AP03 Page 2 of 7 OPEN VIEW OF EUT (FIGURE 3) VIEW OF BATTERY Antenna Report No.: AGC05877220306AP03 Page 3 of 7 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC05877220306AP03 Page 4 of 7 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC05877220306AP03 Page 5 of 7 INTERNAL VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 6) Report No.: AGC05877220306AP03 Page 6 of 7 INTERNAL VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 8) Report No.: AGC05877220306AP03 Page 7 of 7 INTERNAL VIEW OF EUT (FIGURE 9) INTERNAL VIEW OF EUT (FIGURE 10) ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description IMILAB Video Doorbell Model Name CMSXJ33A FCC ID 2APA9-CMSXJ33A 2. EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 3.CALCULATION A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be at least 20 cm and fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. 2.4G WIFI of antenna 1: Antenna Gain=2dBi (Numeric 1.58), π=3.14 Note: 1. Only the worst case recorded. 4. Conclusion ： Compliance the RF exposure requirement Frequency Output Power Output Power Power Density Power Density Limit MHz dBm mW mW/cm 2 mW/cm 2 2437 15.71 37.24 0.0117 1

Page 1 of 70 Report No.: AGC05877220306FE05 FCC ID : 2APA9-CMSXJ33A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : IMILAB Video Doorbell BRAND NAME : IMILAB MODEL NAME : CMSXJ33A APPLICANT : Shanghai Imilab Technology Co., Ltd. DATE OF ISSUE : Apr. 06, 2022 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd FCC Test Report Report No.: AGC05877220306FE05 Page 2 of 70 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 06, 2022 Valid Initial Release Report No.: AGC05877220306FE05 Page 3 of 70 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 7 2.3. IEEE 802.11N MODULATION SCHEME .................................................................................................... 8 2.4. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.5. TEST METHODOLOGY ............................................................................................................................. 8 2.6. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.7. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.8. ANTENNA REQUIREMENT....................................................................................................................... 9 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 10 4. DESCRIPTION OF TEST MODES ................................................................................................................. 11 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 12 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 12 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 12 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 12 6. TEST FACILITY .............................................................................................................................................. 13 7. OUTPUT POWER ........................................................................................................................................... 14 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 14 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 14 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 15 8. BANDWIDTH .................................................................................................................................................. 16 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 16 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 17 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 28 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 28 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 28 9.3. MEASUREMENT EQUIPMENT USEDJN ................................................................................................ 28 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 28 Report No.: AGC05877220306FE05 Page 4 of 70 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 40 10.1 MEASUREMENT PROCEDURE ............................................................................................................ 40 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 40 10.3 MEASUREMENT EQUIPMENT USED ................................................................................................... 40 10.4 LIMITS AND MEASUREMENT RESULT ................................................................................................. 40 11. RADIATED EMISSION ................................................................................................................................. 46 11.1. MEASUREMENT PROCEDURE............................................................................................................ 46 11.2. TEST SETUP .............................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC05877220306FE05 Page 47 of 70 11.2. TEST SETUP Radiated Emission Test-Setup Frequency Below 30MHz RADIATED EMISSION TEST SETUP 30MHz-1000MHz RADIATED EMISSION TEST SETUP ABOVE 1000MHz Report No.: AGC05877220306FE05 Page 48 of 70 11.3. LIMITS AND MEASUREMENT RESULT 15.209(a) Limit in the below table has to be followed Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Note: All modes were tested for restricted band radiated emission, the test records reported below are the worst result compared to other modes. 11.4. TEST RESULT Radiated emission below 30MHz The amplitude of spurious emissions from 9kHz to 30MHz which are attenuated more than 20 dB below the permissible value need not be reported. Report No.: AGC05877220306FE05 Page 49 of 70 Radiated emission from 30MHz to 1000MHz EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHz Antenna Horizontal RESULT: PASS Report No.: AGC05877220306FE05 Page 50 of 70 EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHz Antenna Vertical RESULT: PASS Note: 1. Factor=Antenna Factor + Cable loss, Margin=Measurement-Limit. 2. The “Factor” value can be calculated automatically by software of measurement system. 3. All test modes had been pre-tested. The 802.11b at low channel is the worst case and recorded in the report. Report No.: AGC05877220306FE05 Page 51 of 70 Radiated emission above 1GHz EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHz Antenna Horizontal FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 4824.00055.430.0855.5174-18.49 peak 4824.00046.970.0847.0554-6.95 AVG 7236.00050.532.2152.7474-21.26 peak 7236.00041.282.2143.4954-10.51 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Value Type EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHz Antenna Vertical FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 4824.00056.380.0856.4674-17.54 peak 4824.00046.570.0846.6554-7.35 AVG 7236.00051.192.2153.474-20.6 peak 7236.00042.572.2144.7854-9.22 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Value Type Report No.: AGC05877220306FE05 Page 52 of 70 EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2437MHz Antenna Horizontal FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 4874.00055.430.1455.5774-18.43 peak 4874.00046.370.1446.5154-7.49 AVG 7311.00051.282.3653.6474-20.36 peak 7311.00041.642.364454-10 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Value Type EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2437MHz Antenna Vertical FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 4874.00056.340.1456.4874-17.52 peak 4874.00047.510.1447.6554-6.35 AVG 7311.00050.262.3652.6274-21.38 peak 7311.00041.592.3643.9554-10.05 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Value Type Report No.: AGC05877220306FE05 Page 53 of 70 EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2462MHz Antenna Horizontal FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 4924.00055.460.2255.6874-18.32 peak 4924.00046.380.2246.654-7.4 AVG 7386.00050.492.6453.1374-20.87 peak 7386.00042.182.6444.8254-9.18 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Value Type EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2462MHz Antenna Vertical FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 4924.00056.380.2256.674-17.4 peak 4924.00045.280.2245.554-8.5 AVG 7386.00051.272.6453.9174-20.09 peak 7386.00042.162.6444.854-9.2 AVG Remark: Factor = Antenna Factor + Cable Loss – Pre-amplifier. Value Type RESULT: PASS Note: The amplitude of other spurious emissions from 1G to 25 GHz which are attenuated more than 20 dB below the permissible value need not be reported. Factor = Antenna Factor + Cable loss - Amplifier gain, Over=Measure-Limit. The “Factor” value can be calculated automatically by software of measurement system. All test modes had been pre-tested. The 802.11b mode is the worst case and recorded in the report. Report No.: AGC05877220306FE05 Page 54 of 70 Test result for band edge emission at restricted bands EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC05877220306FE05 Page 55 of 70 EUT IMILAB Video Doorbell Model Name CMSXJ33A Temperature 25°C Relative Humidity 60% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC05877220306FE05 Page 56 of 70 EUT IMILAB Video Doorbell Model Name CMSXJ…

Text truncated - open the document above for the full version.

Report No.: AGC05877220306AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC05877220306AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************