2APA9-CMSXJ56FIMILAB C21

Входное напряжение: 5 В 2 A EРасширяемая память: карта MicroSD (до 64 ГБ) Размеры: 109 мм х 75 мм х 73 мм Рабочая температура: от -10 до 40 °C Par la présente, Shanghai Imilab Technology Co., Ltd. déclare que le type d’équipement radio IMILAB C21 est conforme à la directive 2014/53/UE. Le texte intégral de la déclaration UE de conformité est disponible à l'adresse Internet suivantehttps://www.imilabglobal.com/pages/eu-declara- tion-of-conformity Montage de l’IMILAB C21 sur un mur: 2. Insérez les deux ancrages en plastique dans les trous du mur. Installation Voyant Bleu fixe : connecté/état de l’appareil est normal. Bleu clignotant : erreur de réseau Orange clignotant rapidement : attente de connexion Orange clignotant lentement : mise à niveau du système en cours Installation d’une carte MicroSD Restaurer les paramètres d’usine Informations DEEE Déclaration de conformité pour l’Union européenne Read this manual carefully before use, and retain it for future reference. IMILAB C21 Home Security Camera User Manual Présentation du produit Contenu de l’emballage : IMILAB C21 x 1, câble d’alimentation x 1, ensemble d’accessoires de fixation murale x 1, manuel d’utilisation x 1 Fente pour microSD (Peut être révélé en poussant la lentille vers le haut) Objectif Indicateur d’état Haut-parleur Port de charge micro-USB Microphone Trou de réinitialisation Vue de face Vue arrière FR-10 FR-11 FR-14 FR-15 Caractéristiques Mises en garde FR-16 Déclaration de la FCC FR-17 FR-18 Avertissement : Lors du montage de la caméra de sécurité sur un mur : FR-12 Perspective vers le haut 4. Alignez la rainure située au bas de la caméra avec la partie surélevée de la base, enclenchez-la et tournez-la dans le sens indiqué ci-dessous jusqu’à ce qu’elle soit verrouillée en place. Pour éviter tout dommage ou blessure, l’appareil doit être solidement fixé au plancher/mur comme spécifié dans les instructions d’installation. Veuillez noter que le mur doit pouvoir supporter au moins le triple du poids total du produit. Instructions sur le produit Mise en marche de l’appareil FR-13 L’IMILAB C21 s’active automatiquement dès que le câble d’alimentation est inséré dans le port de charge Micro-USB. 1. Si le témoin lumineux clignote en orange, cela signifie que l’appareil a été activé avec succès. Dans le cas contraire, veuillez réinitialiser l’appareil. 2. Une fois que l’IMILAB C21 est sous tension, n’essayez pas de faire tourner sa tête par la force. Si la position de la caméra est incorrecte, des ajustements peuvent être eectués via l’application. Assurez-vous que l’IMILAB C21 est déjà débranché. Ajustez l’objectif de la caméra vers le haut jusqu’à ce que le logement MicroSD soit visible, puis insérez la carte MicroSD dans le logement (le côté avec les points de contact doit être tourné vers le bas). Note : Veuillez couper l’alimentation de l’IMILAB C21 avant d’insérer ou de retirer la carte MicroSD. Veuillez utiliser une carte Micro SD authentique fabriquée par un fournisseur qualifié, avec une vitesse de lecture/écriture non inférieure à U1/Classe 10. (La capacité maximale prise en charge est de 64 Go) Appuyez sur le trou de réinitialisation et maintenez-le enfoncé à l’aide d’une aiguille fine, puis vous entendrez la voix « Réinitialisation réussie ». Les données stockées sur la carte MicroSD ne sont pas supprimées. Manufacturer: Shanghai Imilab Technology Co., Ltd. Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China Support: [email protected] Warranty: https://www.imilabglobal.com/pages/warranty CONTENTS English01-09 19-27Deutsche 10-18Français 28-36Pусский 46-54日本語 37-45Español 55-63Türkçe 64-72Tiếng Việt 73-81ภาษาไทย 82-90한국어 91-99 תי ִרְבִע Scan the QR code with your mobile phone to get the manual in more languages Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB C21 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.imilabglobal.com/pages/eu-declaration-of-con- formity Product Overview IMILAB C21 can be placed on a number of horizontal surfaces, such as a writing desk, dining table, and coee table. It can also be mounted on the wall. Mounted IMILAB C21 on a Wall: 1. Drill two holes on the wall by using the base of the IMILAB C21 as a template. It is recommended that you mark the locations of the hole with a pencil before drill ing. The diameter of each hole is approximately 6 mm, and the depth is approximately 30 mm. 2. Insert the two plastic anchors into the holes on the wall. Package Contents: IMILAB C21 x 1, power cable x 1, wall mounting accessories pack x 1, user manual x 1 Installation Indicator Light Steady blue on: connected/device status is normal Flashing blue: network error Flashing orange rapidly: waiting for connection Flashing orange slowly: system upgrade in progress Installing a MicroSD Card Make sure that the power to IMILAB C21 is already disconnected. Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the side with contact points must be facing down). Note: Please turn o the IMILAB C21‘s power supply before inser ting or removing the MicroSD card. Please use a genuine Micro SD card manufactured by a qualified supplier, with a reading/writing speed of no less than U1/Class 10. (Maximum support capacity is 64 GB) Restore Factory Settings Press and hold the reset hole with fine needle, then you can hear the “reset succeed” voice. Data stored on the MicroSD card is not deleted. Connecting with the Mi Home/Xiaomi Home App About works with mijia “works with mijia” signifies that the product herein is designed to connect and interact with Mi Home app or Mi AI. Please be noted that the product herein is certified by the app interaction only. Xiaomi and Mijia are not responsible for anyof the product manufacturing, safety and regulatory standards, or quality supervisi…

Text truncated - open the document above for the full version.

Shanghai Imilab Technology Co.,Ltd. Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai ,China Date: Oct. 13, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2APA9-CMSXJ56F US Agent – Attestation Statement / Part 2.911(d)(7) [Shanghai Imilab Technology Co.,Ltd.] certifies, that as of [Oct. 13, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2APA9-CMSXJ56F. [Shanghai Imilab Technology Co.,Ltd.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Shanghai Imilab Technology Co.,Ltd.] for FCC ID: 2APA9-CMSXJ56F. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Shanghai Imilab Technology Co.,Ltd. Designated Agent: FCC US Agent, LLC Company Representative: wang hesong Tel: 021-54201111 FRN: 0027364421 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

Agent Authorization Company: Shanghai Imilab Technology Co., Ltd. Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China Product Name: IMILAB C21 Model Number(s): CMSXJ56B Product Description: IMILAB C21 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Oct. 13, 2023 Name: wang hesong Title: General Manager Company: Shanghai Imilab Technology Co., Ltd.

Report No.: AGC05877230806AP03 Page 1 of 4 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC05877230806AP03 Page 2 of 4 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC05877230806AP03 Page 3 of 4 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC05877230806AP03 Page 4 of 4 Series shell difference photos ****************************************End of Report*************************************

FCC ID Label Location 15mm*5mm FCC ID: 2APA9-CMSXJ56F

Report No.: AGC05877230806AP03 Page 1 of 5 INTERNAL PHOTOS OPEN VIEW OF EUT(FIGURE 1) OPEN VIEW OF EUT(FIGURE 2) Report No.: AGC05877230806AP03 Page 2 of 5 OPEN VIEW OF EUT(FIGURE 3) INTERNAL VIEW OF EUT(FIGURE 1) Report No.: AGC05877230806AP03 Page 3 of 5 INTERNAL VIEW OF EUT(FIGURE 2) INTERNAL VIEW OF EUT(FIGURE 3) Report No.: AGC05877230806AP03 Page 4 of 5 INTERNAL VIEW OF EUT(FIGURE 4) INTERNAL VIEW OF EUT(FIGURE 5) WIFI Antenna Report No.: AGC05877230806AP03 Page 5 of 5 INTERNAL VIEW OF EUT(FIGURE 6) INTERNAL VIEW OF EUT(FIGURE 7) ****************************************End of Report*************************************

Shanghai Chuangmi Technology Co.,Ltd. Shanghai Chuangmi Technology Co., Ltd. Antenna Type Part Description ManufacturerKunshan Yunzhihong Electronic Technology Co. LTD.Description: SUS301（T=0.15) Product Name: YH0001_WIFI_MTLProject:IMI_IPC016_A01 Part No.: S1C1431ZZZF Attachments: □ Specification □ Drawing □ Sample □ RoHS Report □ CPK Report □ FAI Report □ Reliability Report □ RoHS Questionnaire □ QC Flow Chart □ Material Verification Sheet □ Packing Content □ Safety Report * ROHS VendorDesignCheck Approval: Technology CheckMechanicalHardwareID Sourcing SoftwareKeypartEngineering SQE Project ManagerProduct ManagerCustomer Final CheckQuality PlanningRohs Status ■ RoHS □ No n-RoHS Approval condition □ Approved □ Reject Approval condition □ Conditional Approved Conditions: □ Temporary ApprovedLimited________Pcs for purchasing Approval byRD Leader（Technology Director） Quality Director * Audit by Technology Director or Qunality director on the conditions of special approval Distribute □ IQC □ hardware □ ME □ Software □ Components □ ID □ Vendor □ Customer □ outsoucing □ Engineering □ SQE □ Others ________ VER:A Shanghai Chuangmi Technology Co., Ltd. Content 1 Mechanical Drwing 2 Full Dimensions Report 3 Cpk report 4 Inspection specification 5 ProcessFlow chart 6 QCP 7 Reliability test report 8 Antenna Performance Report 9 Antenna Rediations 10 Antenna Gain 11 Antenna BOM 12 ROHS 13 Package VER:A/22/2 Full Dimensions Report VendorMaterialMetalPart No.S1C1431ZZZFTool NumberCav. NumberUnit Comments Model SUS301 3/4h Part Name IPC016_WIFI_MT L YZH00135 1% Date 2018.09.3 ReversionA0 Measured Dimensions% Tolerance UsedDispositionAcceptance variance D I M . # DIMENSION D R A W I N G Z O N E + TOL.- TOL. N O T E SAMPLE 1SAMPLE 2SAMPLE 3SAMPLE 4SAMPLE 5UPPERLOWER 0 % - 2 5 % 2 5 % - 5 0 % 5 0 % - 7 5 % 7 5 % - 1 0 0 % 1 0 0 % + R e - M e a s u r e A c c e p t F i x T o o l A c c e p t W i t h V a r i a n c e DIMENSION+ TOL.- TOL. 1 14.300.150.1514.3614.3614.3914.3814.38 63%0%X 2 6.190.150.156.236.186.156.216.25 40%27% 3 1.150.050.051.171.171.161.151.15 34%8%X 5 11.62 0.150.1511.6611.6811.5911.6211.60 40%20%X 6 4.45 0.150.154.424.494.514.404.44 40%33%X 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 INCHESMILLIMETERS CPK Report Part NumberS1C1431ZZZF Vendor Kunshan Yunzhihong Electronics and Technology Co.,Ltd. Description IPC016_WIFI_MTL Inspected Sinfo Pan Tool Number YZH00135 Inches/MM MM Cavity 1 Material Name Metal Material Code SUS 301 3/4H Revision A0 Date 3-Sep-18 Dim. Designator) 123 Nominal 14.306.19 + Tolerance 0.150.15 - Tolerance -0.15-0.15 Upper Limit 14.456.340.000.00 Lower Limit 14.156.040.000.00 114.386 6.239 214.341 6.197 314.366 6.216 414.381 6.219 514.375 6.197 614.356 6.257 714.341 6.199 814.386 6.197 914.381 6.196 1014.373 6.199 1114.366 6.197 1214.341 6.296 1314.385 6.199 1414.356 6.192 1514.341 6.196 1614.385 6.199 1714.386 6.197 1814.341 6.196 1914.386 6.333 2014.381 6.197 2114.375 6.196 2214.386 6.194 2314.341 6.197 2414.388 6.196 2514.396 6.199 2614.341 6.197 2714.395 6.196 2814.356 6.199 2914.381 6.197 3014.391 6.196 3114.382 6.197 3214.375 6.196 MAX.14.406.330.000.000.00 MIN.14.346.190.000.000.00 AVERAGE14.376.21#DIV/0!#DIV/0!#DIV/0! STDEV0.020.03#DIV/0!#DIV/0!#DIV/0! CP2.651.60#DIV/0!#DIV/0!#DIV/0! Cpk1.401.40#DIV/0!#DIV/0!#DIV/0! TOOLING Audit：Editor:Date: Kunshan Yunzhihong Electronic Technology Co., Ltd. Survey report Serial number： D20180903 Customer Chuangmi Product name IPC016 Amount 5pcs Part Number S1C1431ZZF Orig. Date 3-Sep-18 Proving time 3-Sep-18NO A Sampling plan GB/T2828.1-2012 Sampling plan test level A normal sampling plan ‖ AQL=0.4 NO inspection item inspection item Norm sampling quantity Allowa ble number of defect ive produc ts Measur ement of the number of defect ive produc ts DecideOK/NG 1Appearance eyeballing n Surface stains, black spots 00OK 2 Colour Visual chromatic aberration, color The same batch can not have obvious visual color 00OK 3 Size Part of the real world measurement value Decide OK/NG 12345 7 14.3±0.15 14.3814.3714.3214.3214.39 OK 6.19±0.156.186.166.216.146.13 OK 8 11.62±0.1511.6611.6811.5911.6211.60 OK 10 Continuity test Test the conduction status of all OK 11 Network component consistenc y test Test the consistency of the welded product OK Decide （ OK/NG ） OK ProducerzhengjinjinNotarihuangjin Process Flow Chart Customer Shanghai Chuangmi Technology Co., LTD. Written By Feng Wen Orig. Date 3-Sep-18 Part Number S1C1431ZZZF Revised By Xuehua Lan Revised Date 3-Sep-18 Description YH0001_WIFI_MTL Approved By Sinfo Pan Approved Date 3-Sep-18 Raw material Approval Stamping Final inspection Make a proof The final sampling inspection Test Cleanout Packaging Drying RF Detection QC inspection QC engineering drawing Customer Chaungmi Written By huang qing Orig. Date 3-Sep-18 Part Number S1C1431ZZZF Revised By / Revised Date / Description IPC016 Approved By lai wei jiang Approved Date 3-Sep-18 Section Serial number Process flow chartControl pointFacilityFrock Monitoring and measuring device Quality department 1 Material composition/environme ntal protection/Specification /appearance Quantity/label material proof/spectrum analyzer/caliper/mi crometer/visual Warehouse department 2 First in first out Storage conditions The ERP system Temperature, hygrometer Stamping department 3 Stamping parameters 60T Punching machine Mould: CFK72- 3237-A Visual Check record Quality department 4 1. For full size, please refer to the drawing 2, appearance Height indicator/gage/cali per/micrometer/vis ual Stamping department 5 Appearance 60Tpunch Mould: CFK72- 3237-A Visual Quality department 6 1. For key dimensions, please refer to the drawing 2, appearance Height indicator/gage/cali per/micrometer/vis ual Packaging division 7 Appearance (defective surface) Visual Packaging division 7 Appearance (surface dirt, grease, oxidation, etc.) Visual Packaging division 8 AppearanceVisual Quality department 9 The key size Height instrument/gage/ca liper/micromet…

Text truncated - open the document above for the full version.

Page 1 of 84 FCC Test Report Report No.: AGC05877230806FR01 FCC ID : 2APA9-CMSXJ56F APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : IMILAB C21 BRAND NAME : N/A MODEL NAME : CMSXJ56B APPLICANT : Shanghai Imilab Technology Co.,Ltd. DATE OF ISSUE : Oct. 09, 2023 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05877230806FR01 Page 2 of 84 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 09, 2023 Valid Initial Release Report No.: AGC05877230806FR01 Page 3 of 84 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Table of Carrier Frequency ........................................................................................................................ 7 2.3 IEEE 802.11n Modulation Scheme ........................................................................................................... 8 2.5 Related Submittal(S) / Grant (S) ............................................................................................................... 9 2.6 Test Methodology ...................................................................................................................................... 9 2.7 Special Accessories .................................................................................................................................. 9 2.8 Equipment Modifications ........................................................................................................................... 9 2.9 Antenna Requirement................................................................................................................................ 9 2.11 Description of Test Software ................................................................................................................. 10 3. Test Environment .......................................................................................................................................... 11 3.1 Address of The Test Laboratory .............................................................................................................. 11 3.2 Test Facility .............................................................................................................................................. 11 3.3 Environmental Conditions ....................................................................................................................... 12 3.4 Measurement Uncertainty ....................................................................................................................... 12 3.5 List of Equipment Used ........................................................................................................................... 13 4.System Test Configuration ............................................................................................................................ 15 4.1 EUT Configuration ................................................................................................................................... 15 4.2 EUT Exercise ........................................................................................................................................... 15 4.3 Configuration of Tested System .............................................................................................................. 15 4.4 Equipment Used In Tested System ......................................................................................................... 15 4.5 Summary of Test Results ........................................................................................................................ 16 5. Description of Test Modes ........................................................................................................................... 17 6. Duty Cycle Measurement ............................................................................................................................. 18 7. RF Output Power Measurement .................................................................................................................. 20 7.1 Provisions Applicable .............................................................................................................................. 20 7.2 Measurement Procedure ......................................................................................................................... 20 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 20 7.4 Measurement Result ............................................................................................................................... 21 8. 6dB Bandwidth Measurement ...................................................................................................................... 22 8.1 Provisions Applicable .............................................................................................................................. 22 8.2 Measurement Procedure ......................................................................................................................... 22 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 22 8.4 Measurement Results ............................................................................................................................. 23 9. Power Spectral Density Me…

Text truncated - open the document above for the full version.

Report No.: AGC05877230806FR01 Page 77 of 84 Band Edge Emission Test Results for Restricted Bands EUT Name IMILAB C21 Model Name CMSXJ56B Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage Test Mode Mode 7 Antenna Polarity Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: Pass Report No.: AGC05877230806FR01 Page 78 of 84 Band Edge Emission Test Results for Restricted Bands EUT Name IMILAB C21 Model Name CMSXJ56B Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage Test Mode Mode 9 Antenna Polarity Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: Pass Report No.: AGC05877230806FR01 Page 79 of 84 Band Edge Emission Test Results for Restricted Bands EUT Name IMILAB C21 Model Name CMSXJ56B Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage Test Mode Mode 9 Antenna Polarity Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: Pass Note: The factor had been edited in the “Input Correction” of the Spectrum Analyzer. Report No.: AGC05877230806FR01 Page 80 of 84 12. AC Power Line Conducted Emission 12.1 Measurement Limits Frequency Maximum RF Line Voltage Q.P (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 12.2 Block Diagram of Line Conducted Emission Test Report No.: AGC05877230806FR01 Page 81 of 84 12.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 Ohm load; the second scan had Line 1 connected to a 50 Ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 12.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case was reported on the Summary Data page. 12.5 Test Result of Line Conducted Emission Test Report No.: AGC05877230806FR01 Page 82 of 84 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN line Hot Side RESULT: Pass Report No.: AGC05877230806FR01 Page 83 of 84 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN line Neutral Side RESULT: Pass Report No.: AGC05877230806FR01 Page 84 of 84 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC05877230806AP02 Appendix II: Photographs of EUT Refer to the Report No.: AGC05877230806AP03 ----End of Report---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. In the…

Text truncated - open the document above for the full version.

Report No.: AGC05877230806AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC05877230806AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************