2APD3-TG02Smart Watch

Manual User Supports waterproof Product Configuration: Introduction WATERPROOF: 1 2 4 3 Operating InstructionsActivation and Connection App Download: 1 Connect the watch: 1 2 2 3 Bluetooth Reconnect: 1 2 3 Standard Features 1 2 3 4 33 34 35 36 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NOTES 1 2 3 Common trouble 1 2 3 21 22 23 24 25 26 27 28 29 30 31 32 37 38 39 FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

SHEN ZHEN TOMSTAR TECHNOLOGY CO.,LTD. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [2025-03-07] U.S. Agent Designation [SHEN ZHEN TOMSTAR TECHNOLOGY CO.,LTD. ] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2APD3-TG02): Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [SHEN ZHEN TOMSTAR TECHNOLOGY CO.,LTD. ]. [SHEN ZHEN TOMSTAR TECHNOLOGY CO.,LTD. ] with the FRN [0027397942] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Jun Li] [Huiying Fan] [Manager] [Director] [SHEN ZHEN TOMSTAR TECHNOLOGY CO.,LTD. ] [GLOCERTS TECHNOLOGY INC]

SHENZHENTOMSTARTECHNOLOGYCO.,LTD. AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Mar.11,25 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2APD3-TG02 SHENZHENTOMSTARTECHNOLOGYCO.,LTD.(“theapplicant”)certifiesthat,asofthedateofthe filingoftheapplication,theapplicantisnotidentifiedontheCoveredList,establishedpursuantto§ 1.50002ofreferencechapter,asanentityproducing“covered”communicationequipment.The equipmentforwhichauthorizationissoughtisnot“covered”telecommunicationsequipmentandvideo surveillanceequipmentproducedbyentitiesidentifiedontheCommission’sCoveredListthatprohibited fromreceivinganequipmentauthorizationpursuanttosection§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:JunLi Title:Manager Address:Room2110-2116,huafenginternationalbuilding,NO.4018BaoAnBlvd,Shenzhen,China Tel.:+86-0755-83588177 Fax:+86-0755-83588177 Email:[email protected]

DifferencesDeclaration Towhomconcern, WecompanySHENZHENTOMSTARTECHNOLOGYCO.,LTD. Herebydeclares: Theproductmodel(s)V76areidenticalinthePCBlayout,electronicschematicandantennawith TG02,onlydifferentinmodelnamesandappearancecolor. Sincerelyyours, ApplicantSignature PrintedName:JunLi Title:Manager Address:Room2110-2116,huafenginternationalbuilding,NO.4018BaoAnBlvd,Shenzhen,China Tel.:+86-0755-83588177 Fax:+86-0755-83588177 Email:[email protected]

SHENZHENTOMSTARTECHNOLOGYCO.,LTD. (March7,2025) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:ConfidentialityRequestfor:FCCID:2APD3-TG02 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestpermanent confidentialtreatmentoftheexhibitsaccompanyingthiscertificationapplicationasoutlinedbelow:  BlockDiagram Schematics  OperationalDescription Theaboveexhibitscontaintradesecretsand/orproprietaryinformationthatarenotpubliclyavailableand materialsthattheApplicanthasspentconsiderableeffortsindeveloping.Publicdisclosureofthesemay beharmfultotheApplicantandgiveanunfairadvantagetocompetitorsonthemarket. Sincerely, (Signature) Title:Manager Address:Room2110-2116,huafenginternationalbuilding,NO.4018BaoAnBlvd,Shenzhen,China Tel.:+86-0755-83588177 Fax:+86-0755-83588177 Email:[email protected]

SHENZHENTOMSTARTECHNOLOGYCO.,LTD. (March7,2025) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:AgentAuthorizationforFCCID:2APD3-TG02 I,theundersigned,herebyauthorize(ShenzhenTongzhouTestingCo.,Ltd.)toactonour behalfinallmattersrelatingtothisapplicationforequipmentcertification. Anyactcarriedoutby(ShenzhenTongzhouTestingCo.,Ltd.)shallhavethesameeffect asourownandIacknowledgethatallresponsibilityforcomplyingwiththetermsandconditionsof certification,asspecifiedbyDERYCOMCERTIFICATIONSERVICES,INC.,stillresideswith(SHEN ZHENTOMSTARTECHNOLOGYCO.,LTD.). WecertifythatwearenotsubjecttoadenialoffederalbenefitsthatincludesFCCbenefitspursuantto Section5301oftheAnti-DrugAbuseActof1988,21U.S.C.§862,andthatnopartytotheapplication,as definedin47CFR§1.2002(b),issubjecttoadenialoffederalbenefitsthatincludesFCCbenefits pursuanttothatsection. Sincerely, (Signature) (FullnameofcontactpersonlistedonFCC’swebsite) (Title)Manager Tel:+86-0755-83588177 Fax:+86-0755-83588177 Email:[email protected]

FCC ID:2APD3-TG02 Page 1 of 4 External Photographs of EUT Fig.1 Fig.2 FCC ID:2APD3-TG02 Page 2 of 4 Fig.3 Fig.4 FCC ID:2APD3-TG02 Page 3 of 4 Fig.5 Fig.6 FCC ID:2APD3-TG02 Page 4 of 4 Fig.7 Fig.8

Label&Location

FCC ID:2APD3-TG02 Page 1 of 3 Internal Photographs of EUT Fig.1 Fig.2 FCC ID:2APD3-TG02 Page 2 of 3 Fig.3 Fig.4 FCC ID:2APD3-TG02 Page 3 of 3 Fig.5 Fig.6

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 2 RADIO FREQUENCY EXPOSURE Limit According to section 4.3.1 of KDB 447498 D01 General RF Exposure Guidance v06, SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in Appendix A. Appendix A SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm MHz 5 10 15 20 25 mm 150 39 77 116 155 194 SAR Test Exclusion Threshold (mW) 300 27 55 82 110 137 450 22 45 67 89 112 835 16 33 49 66 82 900 16 32 47 63 79 1500 12 24 37 49 61 1900 11 22 33 44 54 2450 10 19 29 38 48 3600 8 16 24 32 40 5200 7 13 20 26 33 5400 6 13 19 26 32 5800 6 12 19 25 31 MHz 30 35 40 45 50 mm 150 232 271 310 349 387 SAR Test Exclusion Threshold (mW) 300 164 192 219 246 274 450 134 157 179 201 224 835 98 115 131 148 164 900 95 111 126 142 158 1500 73 86 98 110 122 1900 65 76 87 98 109 2450 57 67 77 86 96 3600 47 55 63 71 79 5200 39 46 53 59 66 5400 39 45 52 58 65 5800 37 44 50 56 62 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 2 Results Test Mode Max Conducted Power(dBm) Test distance (mm) Calculation Value for 1g SAR (Note 1) Exemption Limit for 1g SAR BT 3.0 5 0.618 7.5 BLE 3.14 5 0.639 7.5 Note: 1. Calculation Value = [(max. power of channel, mW) / (min. test separation distance, mm)] ·[√f(GHz)]. Conclusion: The SAR evaluation is not required.

天线规格承认书 AntennaSpecificationforApproval 客户名称 CustomerName ： 产品名称： ProductName：2.4GAntLength25mm 客户型号： ProductName: 产品料号： PartNO.:C10-35-2.5 制表： WriteBy：庄杰彬 日期： IssuedDate:2021-10-08 Customer: R&DDept BusinessDept ApprovedBy ProductSpecification A. ElectricalCharacteristics Frequency2400MHz ~2500MHzVSWR<3.0 Efficiency>30% Impedance50 OhmPolarization LineGain 0.17DBi B.Material&MechanicalCharacteristics MaterialofRadiatorCu CableType1.019P红 ConnectorType:NO Dimension C. Environmental OperationTemperature-30°C~+80 °CStorageTemperature-30°C~+ 85°C TestEquipment&Conditions 1.NetworkAnalyzers: Agilent8753D5071C 2.CommunicationsTestSet: AgilentE5525C 3.3DChamberTestSystem Effiency&Gain RadiationPattern:

This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Page 1 of 34 TEST REPORT Report Number : TZ0129250212FRF01 Product Name : Smart Watch Model/Type reference : TG02, V76 FCC ID : 2APD3-TG02 Prepared for : SHEN ZHEN TOMSTAR TECHNOLOGY CO., LTD. Room2110-2116, huafeng international building, NO.4018 BaoAn Blvd, Shenzhen, China. Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10: 2020 Date of Test : 2025-02-12 to 2025-02-27 Date of Issue : 2025-02-28 Prepared by : Lena Wen (File administrators) Reviewed by : Max Zhang (Technical Manager) Approved by : Andy Zhang (General Manager) Report No.:TZ0129250212FRF01 Page 2 of 34 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2025-02-28 Valid Initial release Report No.:TZ0129250212FRF01 Page 3 of 34 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N .............................................................4 1.1. Client Information ............................................................................................................................. 4 1.2. Description of Device (EUT) ............................................................................................................ 4 1.3. Wireless Function Tested in this Report ........................................................................................ 4 1.4. EUT configuration ............................................................................................................................. 5 1.5. Description of Test Facility .............................................................................................................. 5 1.6. Statement of the Measurement Uncertainty .................................................................................. 5 1.7. Measurement Uncertainty ................................................................................................................ 6 1.8. Description of Test Modes ............................................................................................................... 6 1.9. Frequency of Channels .................................................................................................................... 6 2. T E S T M E T H O D O L O G Y ..................................................................7 2.1. EUT Configuration ............................................................................................................................ 7 2.2. EUT Exercise ..................................................................................................................................... 7 2.3. Test Sample ....................................................................................................................................... 7 3. S Y S T E M T E S T C O N F I G U R A T I O N ....................................................8 3.1. Justification ....................................................................................................................................... 8 3.2. EUT Exercise Software ..................................................................................................................... 8 3.3. Special Accessories ......................................................................................................................... 8 3.4. Block Diagram/Schematics .............................................................................................................. 8 3.5. Equipment Modifications ................................................................................................................. 8 3.6. Test Setup .......................................................................................................................................... 8 4. S U M M A R Y O F T E S T R E S U L T S .......................................................9 5. M E A S U R E M E N T R E S U L T S .......................................................... 10 5.1. Maximum Peak Conducted Output Power ................................................................................... 10 5.2. Frequency Separation and 20 dB Bandwidth .............................................................................. 11 5.3. Number of Hopping Frequency ..................................................................................................... 12 5.4. Time of Occupancy (Dwell Time) .................................................................................................. 13 5.5. Conducted Spurious Emissions and Band Edges Test.............................................................. 15 5.6. Restricted Band Emission Limit .................................................................................................... 16 5.7. AC Power line conducted emissions ............................................................................................ 25 5.8. Band-edge measurements for radiated emissions ..................................................................... 28 5.9. Pseudorandom frequency hopping sequence ............................................................................ 31 5.10. Antenna requirement .................................................................................................................... …

Text truncated - open the document above for the full version.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 1 of 64 Appendix Test Data for BT(BDR/EDR) (Conducted Measurement) Product Name: Smart Watch Trade Mark: N/A Test Model: TG02 FCC ID: 2APD3-TG02 Environmental Conditions Temperature: 23.5°C Relative Humidity: 50% ATM Pressure: 100.0 kPa Test Engineer: Tony luo Supervised by: Max zhang NOTE N/A 1. Bandwidth 1.1 Test Result 1.1.1 OBW Mode TX Type Frequency (MHz) Packet Type ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit GFSK SISO 2402 DH5 1 0.872 / Pass 2441 DH5 1 0.870 / Pass 2480 DH5 1 0.869 / Pass Pi/4DQPSK SISO 2402 2DH5 1 1.163 / Pass 2441 2DH5 1 1.163 / Pass 2480 2DH5 1 1.161 / Pass 8DPSK SISO 2402 3DH5 1 1.172 / Pass 2441 3DH5 1 1.166 / Pass 2480 3DH5 1 1.166 / Pass 1.1.2 20dB BW Mode TX Type Frequency (MHz) Packet Type ANT 20dB Bandwidth (MHz) Verdict Result Limit GFSK SISO 2402 DH5 1 0.963 / Pass 2441 DH5 1 0.962 / Pass 2480 DH5 1 0.961 / Pass Pi/4DQPSK SISO 2402 2DH5 1 1.285 / Pass 2441 2DH5 1 1.283 / Pass 2480 2DH5 1 1.283 / Pass 8DPSK SISO 2402 3DH5 1 1.301 / Pass 2441 3DH5 1 1.302 / Pass 2480 3DH5 1 1.299 / Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 2 of 64 1.2 Test Graph 1.2.1 OBW GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 3 of 64 GFSK_DH5_HCH_2480MHz_Ant1_NTNV Pi/4DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 4 of 64 Pi/4DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV Pi/4DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 5 of 64 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV 8DPSK_3DH5_MCH_2441MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 6 of 64 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 7 of 64 1.2.2 20dB BW GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 8 of 64 GFSK_DH5_HCH_2480MHz_Ant1_NTNV Pi/4DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 9 of 64 Pi/4DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV Pi/4DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 10 of 64 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV 8DPSK_3DH5_MCH_2441MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 11 of 64 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 12 of 64 2. Maximum Conducted Output Power 2.1 Test Result 2.1.1 Power Mode TX Type Frequency (MHz) Packet Type Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit GFSK SISO 2402 DH5 3.00 <=30 Pass 2441 DH5 2.10 <=30 Pass 2480 DH5 1.80 <=30 Pass Pi/4DQPSK SISO 2402 2DH5 1.16 <=20.97 Pass 2441 2DH5 0.26 <=20.97 Pass 2480 2DH5 0.01 <=20.97 Pass 8DPSK SISO 2402 3DH5 1.72 <=20.97 Pass 2441 3DH5 0.88 <=20.97 Pass 2480 3DH5 0.58 <=20.97 Pass Note1: Antenna Gain: Ant1: 0.17dBi; Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 13 of 64 2.2 Test Graph 2.2.1 Power GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 14 of 64 GFSK_DH5_HCH_2480MHz_Ant1_NTNV Pi/4DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 15 of 64 Pi/4DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV Pi/4DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 16 of 64 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV 8DPSK_3DH5_MCH_2441MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 17 of 64 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 18 of 64 3. Carrier Frequency Separation 3.1 Test Result 3.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) Packet Type Channel Separation (MHz) 20dB Bandwidth (MHz) Limit (MHz) Verdict GFSK SISO HOPP DH5 0.970 0.963 >=0.963 Pass Pi/4DQPSK SISO HOPP 2DH5 1.001 1.285 >=0.857 Pass 8DPSK SISO HOPP 3DH5 1.001 1.302 >=0.868 Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 19 of 64 3.2 Test Graph 3.2.1 Ant1 GFSK_DH5_HOPP_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 20 of 64 8DPSK_3DH5_HOPP_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 21 of 64 4. Number of Hopping Frequencies 4.1 Test Result 4.1.1 HoppNum Mode TX Type Frequency (MHz) Packet Type Num of Hopping Frequencies Verdict ANT1 Limit GFSK SISO HOPP DH5 79 >=15 Pass Pi/4DQPSK SISO HOPP 2DH5 79 >=15 Pass 8DPSK SISO HOPP 3DH5 79 >=15 Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 22 of 64 4.2 Test Graph 4.2.1 HoppNum GFSK_DH5_HOPP_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 23 of 64 8DPSK_3DH5_HOPP_Ant1_NTNV Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APD3-TG02 Report No.: TZ0129250212FRF01 Page 24 of 64 5. Time of Occupancy (Dwell Time) 5.1 Test Result 5.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) Packet Type Duration of Single Pulse (ms) Observation Period (s) Num of Pulse in Observation Period Dwell Time (ms) Limit (ms) Verdict GFSK SISO HOPP DH1 0.394 31.600 320 126.080 <=400 Pass DH3 1.644 31.600 165 271.260 <=400 Pass DH5 2.892 31.600 106 306.552 <=400 Pass Pi/4DQPSK SISO HOPP 2DH1 0.394 31.600 320 126.0…

Text truncated - open the document above for the full version.

FCC ID:2APD3-TG02 Page 1 of 2 Test Setup Photos of the EUT Conducted Emission Radiated Emission Below 1GHz FCC ID:2APD3-TG02 Page 2 of 2 Radiated Emission Above 1GHz