2APJZ-PDT0093VController

Holiday Symphony Tree FOR INDOOR USE ONLY Instructions Guide MUSIC LIGHT SHOW HOLIDAY SYMPHONY ™ IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. The remote controller is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death. 2. Small parts, keep batteries out of reach of children. 3. Do not expose the remote controller to moisture. 4. Remove batteries when not used for an extended period of time, or when depleted. 5. Dispose of used batteries properly. 6. Use only CR2032 batteries for the remote controller. 7. Clean the battery contact surfaces gently prior to battery installation. 8. Do not dispose of batteries in fire. Batteries may explode or leak. SAVE THESE INSTRUCTIONS. 1. To reduce the risk of fire and electric shock: a) Use only the power supply that is provided with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards; b) Do not install on trees that have needles, leaves or branches covering with metal or materials which look like metal; c) Do not mount or support strings in a manner that can cut or damage wire insulation. 2. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. 3. Do not connect the chain to the supply while it is in the packing. 4. The lamps are not replaceable. 5. Do not interconnect parts of this lighting chain with parts of another manufacturer's lighting chain. 6. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use. WARNING CAUTION AC Adapter Input: 220-240 V / 50-60 Hz, 0.378 A Output: DC 24 V, 2.063 A Technical Specifications Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. Physical Setup a.b. 2 c.d. e.f. g. 4 Remote Control Instructions Remove the insulation tab of the remote control. Insulation Tab This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes. Play Play Next Color-Changing (RGB Lights) Press this button to play all 7 songs/light shows in sequence repeatedly. Once pressed, the sequence will always play from the start. Song List: 1. Carol of the Sugar Plums 2. Deck the Halls 3. Candela Teaser 4. Joy to The World/O Come All Ye Faithful 5. We Wish You a Merry Jingle Bells 6. Russian Dance 7. Toys on the Housetop Press this button to skip to the next song/light show when the light show is on. Press this button to select from the preset light colors/effects (1-3) or to turn off the lights. 1. Random Light Colors/Effects ("Beautiful Movement": Pre-programmed light effects cycle without music accompaniment) 2. Warm White Steady Glow 3. Multi-color Steady Glow 4. Off Press once to increase the volume by one level, a total of 10 levels can be adjusted. Key Functions Volume Up Press once to decrease the volume by one level, a total of 10 levels can be adjusted. Volume Down 6 Songs can be played via an external speaker, simply connect the Music Controller Speaker to an external speaker with a 3.5 mm audio cable. Once connected to an external speaker, there will be no sound output from the conductor speaker. Aux Outlet AUX Aux OutletMusic Controller Speaker SYMPHONY HOLIDAY TM AUX 1. Loosen the screw of the battery cover with a screwdriver (not included). Battery Replacement 2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the correct polarity (+ and -). 3. Retighten the screw to close and secure the battery cover. 8 Loose Hinge Pin STORAGE INSTRUCTIONS TROUBLESHOOTING TIPS 1. Unplug from power source, and detach plug from adapter. Remove all ornaments and decorations. 2. Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower section, and fold all branches toward the pole. 3. Close the protective caps on the poles to avoid damaging the internal parts. 4. Place the disassembled tree into the shipping box and tape it shut. 5. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may damage your tree. If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker 1. Check to make sure that all plugs and adapter are properly connected as indicated. 2. Turn the poles gently to make sure pole-to-pole connection is secured. 1. Place the branch into the hinge bracket. 2. Insert a new hinge pin all through the holes of bracket, and secure with a washer. This tree includes sets of hinge pins & washers. If extra parts are needed, please contact our customer service center. www.polygroup.com or 1-888-919-0070. SPARE PARTS 10 FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to r…

Text truncated - open the document above for the full version.

QA-FR-170-B Polygroup Trading Limited Add: Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China E-mail: [email protected] Tel: (852) 3583 2222 Fax: (852) 3583 2288 Date: 2020-03-27 FCC Authorization 2020/05/04 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We (Polygroup Trading Limited), the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Print Name: Daniel Liu Title: Compliance manager

Polygroup Trading Limited Add: Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China E-mail: [email protected] Tel: (852) 3583 2222 Fax: (852) 3583 2288 Date: 2020-03-27 FCC Confidential Authorization 2020/05/04 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2APJZ -PDT0093V In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Polygroup Trading Limited) hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Print Name: Daniel Liu Title: Compliance manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.231 TEST REPORT For Polygroup Trading Limited Unit 606, Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China FCC ID: 2APJZ-PDT0093V R e p o r t T y p e : O r i gi n a l R e p o r t P r o d u c t T y p e : R e mo t e C o n t r o l l e r Report Number: RSZ200331814-00 Report Date: 2020-04-21 Reviewed By: Jimmy Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200331814-00 FCC Part 15.231 Page 2 of 18 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 JUSTIFICATION ............................................................................................................................................................. 5 SPECIAL ACCESSORIES ................................................................................................................................................. 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 EXTERNAL I/O CABLE.................................................................................................................................................. 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 TEST EQUIPMENT LIST AND DETAILS ............................................................................................................... 7 FCC §15.203 - ANTENNA REQUIREMENT ............................................................................................................. 8 APPLICABLE STANDARD .............................................................................................................................................. 8 ANTENNA CONNECTOR CONSTRUCTION ...................................................................................................................... 8 FCC §15.205, §15.209, §15.231 (B) - RADIATED EMISSIONS ............................................................................... 9 APPLICABLE STANDARD .............................................................................................................................................. 9 EUT SETUP .................................................................................................................................................................. 9 EMI TEST RECEIVER SETUP ....................................................................................................................................... 10 TEST PROCEDURE ...................................................................................................................................................... 10 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 11 TEST RESULTS SUMMARY .......................................................................................................................................... 11 TEST DATA ................................................................................................................................................................ 11 FCC §15.231(A) (1) - DEACTIVATION TESTING................................................................................................. 15 APPLICABLE STANDARD .................................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)