
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
PickupCarSUVMini RV DIGITAL WIRELESS BACKUP CAMERA SYSTEMS User Manual / Installation Instructions Before Operating The Set PleaseRead The Instructions Completely. 1.Instant Real-time Video Transmission. 2.This is ideal for cars, trucks, SUVs, Pickups or any vehicle where you want to add a backup camera 3. There are no wires from the backup camera to the monitor, they are Separate installation, so it is very easy to install, you do not have to run the wires from the back to the front. 4.The monitor can be fixed on dash or windshield optional. 5.Monitor viewing is HD color and with guide lines built-in camera. 6. Backup camera design with AUTO-Lighting LED lights make your night driving much safety. 7. Digital signal transmission is totally different from analog signal transmission. The signal is point to point. There is no interference from other devices. System Features PickupCarSUVMini RV DIGITAL WIRELESS BACKUP CAMERA SYSTEMS User Manual / Installation Instructions Before Operating The Set PleaseRead The Instructions Completely. NOTE: The contents included may be different based on the kit you purchased. Please take the actual product as standard. What You Get What’s in the Box 5” Wireless Color LCD Monitor Wireless Backup Camera Camera Cord Mount Bracket Mount Bracket User Manual Cigarette Lighter Adapter Monitor Antenna TIPS: 1.The camera is powered by the reversing light, please find out the reversing light with the test pencil, then connect the red wire of the camera to it and the black to the iron part. 2.The monitor is directly connected to the cigarette lighter to get the power. You can turn the display on or off with the red button on the cigarette lighter. Wiring Guide Connect reverse light +(12V-24V) Wirless receiver in the monitor connects with car charger Connect iron part Pairing Power, switch to the channelAV1/AV2, keep pressing “Menu”, pairing successfully will displayed image. Getting Started Pairing the Camera and Monitor Power Flip - + Menu If you have problem when operating this product, please refer to this section. The most common problems are list below, along with likely cause and solution. Signal Problem : Check if Get Power Correctly for Both the Camera and Monitor , If Yes, Then Check if Get Signal When Working Distance With 2M. Missing Part: Not Brand New Without Installation Guide : We Ask Warehouse Guy Checked Again for All Our Stock To Make Sure All set Brand New With All Parts and User Manual Stop Working No Power: May Be Connection Loose , Just Check the Connections Again , and Make Sure All Voltage is Correctly and Make Sure You are In Reversing Gear to Test it if You Get Power From Revers- ing Lights Trouble Shooting 5 Inch Wireless Monitor Specification LCD Size: Operating Frequency: Transmitted Power: Resolution: Brightness: Response Time TV System: Contrast: Power Supply: Operating temperature: Storage temperature: 5 Inch Color Monitor 2400-2483.5MHZ 17db 800(H) x 480(V) 800 cd/m² 25ms PAL/NTSC 500:1 DC12V-36V -20+70 -30+80 Wireless Backup Camera Specification Waterproof Rating: Image Sensor: Operating Frequency: TV System: Resolution: Minimum Illumination: Transmitted Power: View Angle: Power Supply: Operating temperature: Storage temperature: IP67 1/3" CMOS 2400-2483.5MHZ NTSC/PAL 540 TV Lines 0 Lux [IR ON] 17db 110°[H] 150°[D] DC 12V-36V -20+70 -30+80 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Reference N Waltek Tes http://www EXHIBI EUT View 1 EUT View 2 No.: WTH20X sting Group w.semtest.co T 2 - EUT 1 2 X07047663W (Shenzhen) m.cn T EXTER W Co., Ltd. RNAL PH HOTOGR APHS Reference N Waltek Tes http://www EUT View 3 EUT View 4 No.: WTH20X sting Group w.semtest.co 3 4 X07047663W (Shenzhen) m.cn W Co., Ltd. Reference N Waltek Tes http://www EUT View 5 EUT View 6 No.: WTH20X sting Group w.semtest.co 5 6 X07047663W (Shenzhen) m.cn W Co., Ltd. Reference N Waltek Tes http://www EUT View 7 EUT View 8 No.: WTH20X sting Group w.semtest.co 7 8 X07047663W (Shenzhen) m.cn W Co., Ltd.
Reference N Waltek Tes http://www EXHIBI Proposed Specificatio n it is visible durable to r expected lif e Proposed No.: WTH20X sting Group w.semtest.co T 1 - PRO FCC ID La ns: The label or easily acc emain fully l etime. Label Loca X07047663W (Shenzhen) m.cn ODUCT L abel Forma shall be secu cessible to th legible and in ation on EU W Co., Ltd. LABELIN at urely affixed t he user, and ntact on the UT FCC NG to a permane shall not be device in al l ID Label Lo ently attached readily detac l normal cond cation d part of the d chable. The l ditions of use device, in a lo label shall be e throughout ocation where e sufficiently t the device’s e y s
Reference N Waltek Tes http://www EXHIBI EUT Housi n Solder Boa r No.: WTH20X sting Group w.semtest.co T 3 - EUT ng and Boar rd-Compone X07047663W (Shenzhen) m.cn T INTER rd View 1 ent View 1 W Co., Ltd. NAL PHO OTOGRA APHS Reference N Waltek Tes http://www Solder Boa r Solder Boar No.: WTH20X sting Group w.semtest.co rd-Compone rd-Compone X07047663W (Shenzhen) m.cn ent View 2 ent View 3 W Co., Ltd. Reference N Waltek Tes http://www Solder Boa r Antenna V i No.: WTH20X sting Group w.semtest.co rd-Compone iew WIFI Ante X07047663W (Shenzhen) m.cn ent View 4 enna W Co., Ltd.
1. MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 General Information Client Information Applicant: SHENZHEN SUNVEYTECH CO.,LTD Address of applicant: 502,Building A,Penglongpan High-Tech Park, No.11, Dafu Industrial Zone,Guanlan Street, Longhua District, Shenzhen, China Manufacturer: SHENZHEN SUNVEYTECH CO.,LTD Address of manufacturer: 502,Building A,Penglongpan High-Tech Park, No.11, Dafu Industrial Zone,Guanlan Street, Longhua District, Shenzhen, China General Description of EUT: Product Name: Digital Wireless Backup Camera Brand Name: / Model No.: SWD-SN008X Adding Model(s): SWD-SN009X FCC ID: 2AQNR-SN008X Rated Voltage: DC12V Technical Characteristics of EUT: Support Standards: 802.11b, 802.11g, 802.11n Frequency Range: 2412-2462MHz for 802.11b/g/n-HT20 2422-2452MHz for 802.11n-HT40 RF Output Power: 14.82dBm (Conducted) Type of Modulation: DBPSK,BPSK,DQPSK,QPSK,16QAM,64QAM Data Rate: 1-11Mbps, 6-54Mbps, up to 150Mbps Quantity of Channels: 11 for 802.11b/g/n-HT20 7 for 802.11n-HT40 Channel Separation: 5MHz Type of Antenna: External Antenna Antenna Gain: 2.0dBi 1.2 Standard Applicable According to §1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. (a) Limits for Occupational / Controlled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density 1.3 MPE Calculation Method S = (30*P*G) / (377*R 2 ) S = power density (in appropriate units, e.g., mw/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm) 1.4 MPE Calculation Result Maximum Tune-Up output power: 15(dBm) Maximum peak output power at antenna input terminal: 31.62(mW) Prediction distance: >20(cm) Prediction frequency: 2412 (MHz) Antenna gain: 2.0(dBi) Directional gain (numeric gain): 1.58 The worst case is power density at prediction frequency at 20cm: 0.0100 (mw/cm 2 ) MPE limit for general population exposure at prediction frequency: 1 (mw/cm 2 ) Result: Pass
Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn Page 1 of 63 TEST REPORT Reference No. .................... : WTH20X07047663W FCC ID ................................ : 2AQNR-SN008X Applicant ........................... : SHENZHEN SUNVEYTECH CO.,LTD Address ............................. : 502,Building A,Penglongpan High-Tech Park, No.11, Dafu Industrial Zone,Guanlan Street, Longhua District, Shenzhen, China Product Name ................... : Digital Wireless Backup Camera Test Model. ........................ : SWD-SN008X Standards .......................... : FCC Part 15.247 Date of Receipt sample .... : Jul.21, 2020 Date of Test........................ : Jul.21, 2020 to Jul.28, 2020 Date of Issue ..................... : Jul.28, 2020 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Tested by: Reviewed By: Approved & Authorized By: Mike Shi / Project Engineer Lion Cai / RF Manager Silin Chen / Manager Reference No.: WTH20X07047663W Page 2 of 63 Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 10 3. RF EXPOSURE ....................................................................................................................................................... 11 3.1 STANDARD APPLICABLE ....................................................................................................................................... 11 3.2 TEST RESULT........................................................................................................................................................ 11 4. ANTENNA REQUIREMENT ................................................................................................................................ 12 4.1 STANDARD APPLICABLE ....................................................................................................................................... 12 4.2 EVALUATION INFORMATION ................................................................................................................................ 12 5. POWER SPECTRAL DENSITY ........................................................................................................................... 13 5.1 STANDARD APPLICABLE ....................................................................................................................................... 13 5.2 TEST SETUP BLOCK DIAGRAM ............................................................................................................................. 13 5.3 TEST PROCEDURE ................................................................................................................................................. 13 5.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 13 6. DTS BANDWIDTH ................................................................................................................................................. 19 6.1 STANDARD APPLICABLE ....................................................................................................................................... 19 6.2 TEST SETUP BLOCK DIAGRAM ............................................................................................................................. 19 6.3 TEST PROCEDURE ................................................................................................................................................. 19 6.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 19 7. RF OUTPUT POWER ............................................................................................................................................ 25 7.1 STANDARD APPLICABLE ....................................................................................................................................... 25 7.2 TEST SETUP BLOCK DIAGRAM ........................................…
Text truncated - open the document above for the full version.
Reference N Waltek Tes http://www EXHIBI Radiation E Radiation E No.: WTH20X sting Group w.semtest.co T 4 - TES Emission Tes Emission Tes X07047663W (Shenzhen) m.cn ST SETUP st Setup (Belo st Setup (30M W Co., Ltd. P PHOTO ow 30MHz) MHz to 1GHz OGRAPH z) HS Reference N Waltek Tes http://www Radiation E Radiation E No.: WTH20X sting Group w.semtest.co Emission Tes Emission Tes X07047663W (Shenzhen) m.cn st Setup (1GH st Setup (Abo W Co., Ltd. Hz to 18GHz ove 18GHz) z) Reference N Waltek Tes http://www No.: WTH20X sting Group w.semtest.co X07047663W (Shenzhen) m.cn W Co., Ltd.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.41 GHz - 2.46 GHz | 30.30 mW |

Wireless Backup camera System
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Wireless Backup camera System
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Wireless Backup camera System
Equipment Class
DTS - Digital Transmission System